Gusse

@Gusse__ • 2,510 subscribers

Shorts

Here's what you can also do with iDE Resurrector Origami: a PS2 Slim with an HDCombo-style case like back in the "golden days" of PS2 Slim modding 😊 Small specificity: the guy I made it for didn't want the flex cable to be visible, so a hole had to be made in the bottom shell, but the mod can also be done by discreetly running the flex through the outside 😉 Run perfectly with "cheap" 2Tb (and more) SSD The model of the bottom case can be found online (sorry I don't find back the link) oh! and I almost forgot, the switch allows you to disable the chip ;)

Here's what you can also do with iDE Resurrector Origami: a PS2 Slim with an HDCombo-style case like back in the "golden days" of PS2 Slim modding 😊 Small specificity: the guy I made it for didn't want the flex cable to be visible, so a hole had to be made in the bottom shell, but the mod can also be done by discreetly running the flex through the outside 😉 Run perfectly with "cheap" 2Tb (and more) SSD The model of the bottom case can be found online (sorry I don't find back the link) oh! and I almost forgot, the switch allows you to disable the chip ;)

14,560 просмотров

and here's the USB-C power supply for PS2 Fat 😉 Here's a quick explanation: I had to use a 12v step-down device to use 15v output from the USB-C power supply. Because with a hard drive, my USB-C power supply (ugreen) couldn't deliver more than 3A at 12v (at peak when the hard drive's rotation motor starts up). I did some tests with my USB-C card set to 12v and it works if you use an SSD and or the console's optical block. Some photos following the thread. Hope you enjoy ☺️

and here's the USB-C power supply for PS2 Fat 😉 Here's a quick explanation: I had to use a 12v step-down device to use 15v output from the USB-C power supply. Because with a hard drive, my USB-C power supply (ugreen) couldn't deliver more than 3A at 12v (at peak when the hard drive's rotation motor starts up). I did some tests with my USB-C card set to 12v and it works if you use an SSD and or the console's optical block. Some photos following the thread. Hope you enjoy ☺️

20,699 просмотров

As promised, here is PS2 Slim Methylene on my testing ps2 motherboard

As promised, here is PS2 Slim Methylene on my testing ps2 motherboard

19,823 просмотров

Videos

Anya Rossi

sweetdream.ai

SweetDream.ai•Sponsored•Livecam

Watch Anya Live

Anya is streaming live right now! Join her private show and enjoy exclusive content.

Exclusive private shows

1.2k viewers online

Private Show

Join now for exclusive access

Free preview available • Premium content

End of an era Enjoy !

End of an era Enjoy !

21,241 просмотров • 2 месяцев назад

1/2 - reveal Seeing your enthusiasm, I hope not to disappoint you too much... but I didn't promise the moon, just: Optical disk drive present, no SD Card, no cut, more than 128Gb of games So here's my mod: "Super Playstation 2 - cartridge system" based on iDE Resurrector and...

1/2 - reveal Seeing your enthusiasm, I hope not to disappoint you too much... but I didn't promise the moon, just: Optical disk drive present, no SD Card, no cut, more than 128Gb of games So here's my mod: "Super Playstation 2 - cartridge system" based on iDE Resurrector and...

41,451 просмотров • 3 лет назад

a bit of fun, and a lot of headache for not much, but it finally works! PSBBN on SCPH70004 (and theoretically all SCPH700xx versions). Test performed with SATA Mod, but theoretically functional with all iDE Resurrector based mods. Thanks to AtherisMods Lee and Matías Israelson Simply copy the files contained in freemcboot.mc2 (with a memcard pro, or get the files yourself) into the corresponding BE*XEC file, as shown in the screenshot in the comments section.

a bit of fun, and a lot of headache for not much, but it finally works! PSBBN on SCPH70004 (and theoretically all SCPH700xx versions). Test performed with SATA Mod, but theoretically functional with all iDE Resurrector based mods. Thanks to AtherisMods Lee and Matías Israelson Simply copy the files contained in freemcboot.mc2 (with a memcard pro, or get the files yourself) into the corresponding BE*XEC file, as shown in the screenshot in the comments section.

14,843 просмотров • 1 год назад

Больше нет контента для загрузки