MakingSeamistHome

I put this project off for a long time, because it seemed overwhelming and out of my comfort zone. Then I decided to tackle it, right before Christmas 🤣🤣 great timing Laura. Anywhooo, here are the measurements for the framing. This will work if your using a 30 inch cabinet frame like I did: . 1. Use 1x2 to frame around the cabinet opening. The width of the framing should be 28 inches to allow room for your cabinet doors to open on either side 2. Build the frame for the bottom of your hood: the width should be 28 inches and the height 8 inches. 3. The three top trim pieces are 22 inches with the top and bottom mitered at 22.5 degree angles. 4. Use 1/4 inch plywood to cover your frame. Then trim, fill, and paint! . . The color is First Snow @behrpaint The vent hood is from @amazonhome . I’ll link the vent that I used in my stories it can be used for a duct or ductless installation! . . . . #diytutorial #rangehood #cljsquad #diykitchen #kitchenremodel #kitchendesign #kitchenrenovation #doityourself #tutorial #DoritosTriangleTryout #beforeandafter