wazhomedecor's banner
wazhomedecor's profile picture

wazhomedecor

@user3926743061744 • 4,255 subscribers

Shorts

Here’s my MOODY LIQUID WOOD Kitchen!! 🤯 NO SANDING required!!🤩 Comment LINK for products and STEPS!! FOLLOW along for more DIYs and great finds along the way!! #liquidwood #stain #beforeandafter #kitchen #cabinets

Here’s my MOODY LIQUID WOOD Kitchen!! 🤯 NO SANDING required!!🤩 Comment LINK for products and STEPS!! FOLLOW along for more DIYs and great finds along the way!! #liquidwood #stain #beforeandafter #kitchen #cabinets

222,600 Aufrufe

Can you believe this transformation? This cost $100 for the lower cabinets of my kitchen including new hardware!! AND there was NO SANDING involved. Such a big impact for a small cost! Follow along for more budget friendly DIYs and tips and tricks along the way!! #budgetfriendly #diy #diyproject #diyhome #liquidwood

Can you believe this transformation? This cost $100 for the lower cabinets of my kitchen including new hardware!! AND there was NO SANDING involved. Such a big impact for a small cost! Follow along for more budget friendly DIYs and tips and tricks along the way!! #budgetfriendly #diy #diyproject #diyhome #liquidwood

24,900 Aufrufe

EASY Bathroom Vanity UPGRADE with NO SANDING & Liquid Wood!! 🤯 Steps below ⬇️ - Clean all surfaces to be covered with liquid wood. No sanding needed. Remove drawers and cabinets as well as hardware. Tape off walls and floors. - Apply liquid wood to all surfaces with a foam brush in long even strokes. I used Retique It Light Wood Color. Paint two coats. Wait two hours in between coats. - Apply stain of choice. Allow it to sit on the surface for about two minutes before wiping it off with long even strokes. I did one coat of Varathane Kona Stain Oil Base. - After 48 hours of everything drying, apply one to three coats of polyurethane. I did one coat on this area of my bathroom. I used Varathane Matte Polyurethane. #beforeandafter #myhome #diyhome #diy #diyvanity

EASY Bathroom Vanity UPGRADE with NO SANDING & Liquid Wood!! 🤯 Steps below ⬇️ - Clean all surfaces to be covered with liquid wood. No sanding needed. Remove drawers and cabinets as well as hardware. Tape off walls and floors. - Apply liquid wood to all surfaces with a foam brush in long even strokes. I used Retique It Light Wood Color. Paint two coats. Wait two hours in between coats. - Apply stain of choice. Allow it to sit on the surface for about two minutes before wiping it off with long even strokes. I did one coat of Varathane Kona Stain Oil Base. - After 48 hours of everything drying, apply one to three coats of polyurethane. I did one coat on this area of my bathroom. I used Varathane Matte Polyurethane. #beforeandafter #myhome #diyhome #diy #diyvanity

10,100 Aufrufe