#weekendproject

home.sweet.simple's profile picture

See the deets down here 👇🏼 I wanted a table above my washer/dryer to fold laundry but not attach to the wall, and not sit directly on top of it. So it needed to be freestanding. Here’s what I came up with 3/4” birch plywood (spendy but worth it!) I was able to use all my sides with 1 4x8’ sheet 🤓 I wanted a “waterfall” look and not legs but ended up using a smaller piece on the side that sits against the wall since you’ll never see it After measuring 100 times and cutting to size I used my kreg jig to make pocket holes to attach the top and sides together. Normally I would hide the pocket holes but I wanted them to be easier to get to if we ever need to take this out of the room to replace the washer/dryer. So the holes are on the outside 🤮 but whatever I would also advise when building anything to always use wood glue with your pocket holes, but again, built it with the ease of disassembly just in case I sanded the top piece nice and smooth, honestly I didn’t even worry about the sides (lazy) Carried all the pieces upstairs to my laundry room 💪🏼 and assembled in that room using some other scrap wood & my head to hold the top piece on while I screwed in the screws 🤷🏽‍♀️ Attached edge banding (see other tutorial on my page) on the fronts Gave her my favorite stain combo, no exact math to it, just use mostly Golden Oak & a touch of a darker color Used an oil based poly with a bit of mineral spirits to thin it, lightly sanded in between the 2 coats of that & waited impatiently for it to dry! And there we go, a pretty simple project that will hopefully make me want to do more laundry but I doubt it 🙃 📌 Save & give it a try 👇🏼 Follow for more affordable, doable DIY projects #dıyproject #easydiy #diyhome #weekendproject #kregjig #busymomlife #momsdiy #homedecorideas #decoratewithme #cleaningaccount #laundryroommakeover

Home.Sweet.Simple

27,500 просмотров • 2 лет назад

Больше нет контента для загрузки