正在加载视频...
视频加载失败
An effective way to repair light bulbs using simple household tools..
35 条评论

Don’t do this, you’re risking so much, it isn’t worth it. This only works on some lights, basically if they aren’t well designed, i.e. all of the LEDS are in series and not in parallel. Everything they are doing is just bad and potentially hazardous. Don’t be cheap. If you really want to do it, get the right tools, remove the LED and replace it with a compatible one. But please, don’t play around with the 110/220v, if you don’t know what you’re doing, you could really hurt yourself.

This guy sells home insurance on the side 😂

yep and in a few hours or even minutes another LED will burn out because there's too much current going thru the LEDs now

@louisedbegin I'll be damned if I have to start repairing lightbulbs. 😑

Quickest way to a house fire you ever seen

This works well until your house burns down

How to start a house fire in 2 minutes.

Effective way to burn your house down! He troubleshot down to the defective LED, just solder in a new cob-LED. That's not a repair hack, its an "I'm too cheap to buy a replacement bulb"!

@HistorianUSA1 Or just buy a new bulb

I'm wondering why was he now electrocuted by holding it with bare hands

Dont fucking do this.

buying a new bulb > burning down your house

Mach halt ein Lötpunkt drauf und nicht so eine Rotze xD

You will make fire in the house

A effective way to burn your house!

House fire soon

Bro is doing a speed run on turning his shack into a smoldering pile of charcoal

Orrrr just buy a new 0.75 bulb

I've seen some bodge artists.

Fire hazard. Insurances denied.

When you run current through metal, there’s thermal kickback using uninsulated tape. There’s a high chance that this could be very hazardous. Martin mention the risk of that charge going somewhere it’s not supposed to. I’m sorry I’m gonna have to pass on this.

Est-ce que tu peux aller directement te faire enculer également ?

Lol what a dumb asshole. Just buy a new bulb.

A good electrician for sure!!! He Closed circuit for test and don’t use a resistance simple as that (might overheat by default arrangement), although in modern LEDs better change the control chip also. Conclusion Better get another one, unless you are a supplier (have all of them).

لا احد يسويها عندما يحترق بيتك بالكامل من اجل شيء تافه عندها ستعلم لماذا

💡is ₦500.. save yourself this stress

LED bulbs are trash we were sold lies

La meilleure voie pour avoir un incendie d'origine électrique

この直し方はやばいだろうマネしちゃだめだぞ

Não é melhor só comprar outra lâmpada

It's crazy.

A 4 pack of lightbulbs is <10 dollars lmao

They make these things called soldering irons. But no, let’s use part of a metal scrubber and some tape.

There is one technique known as Soldering....Try that.

OMG🤦


