Video wird geladen...

Video konnte nicht geladen werden

Zur Startseite

dino talking about receiving gold from the company and immediately calling mingyu after it disappeared 🦦 i left [the gold] at home and i ended up having drinks with the members at my place. i went to sleep and when i woke up it was gone! 🦦 so i...

211,493 Aufrufe • vor 1 Tag •via X (Twitter)

0 Kommentare

Keine Kommentare verfügbar

Kommentare vom Original-Post werden hier angezeigt

Ähnliche Videos

A man who has never worked in a house before decides to attempt to install a roof vent because his home doesn’t have any and it’s causing massive heat spikes in the attic, how did he do, anything you would have done differently? I’ve been in his shoes before, I already told you about the first thing I attempted and I messed it up, not too bad but enough. Another time was when I was installing my first toilet. The one I was replacing leaked at the base. The flange it screwed into was a plastic Oatey flange and where the bolt holds down the toilet was broken. So the first thing I did was shut off the water, I drained the tank and proceeded to undo the bolts. I lifted it straight up and put it in a bag so it wouldn’t drip on the way down the stairs. I unscrewed the broken flange and replaced it with a new one. The problem was that since it was leaking, some of the wood was soft. I know I should have replaced the board but I didn’t. I ended up rotating the flange until I could screw into good dry board. That was my first mistake. Because after I got the new toilet base on, I over tightened it and not only cracked the toilet but I pulled up the flange because the wood was weak. Since I was replacing the tile anyways I ended up removing everything I did and I broke up all the tile and removed it. I took off the board and replaced it with a new one. I retraced my steps after I installed the vinyl floor planks and trimmed them to fit the flange. When I put the toilet back down it wasn’t flush. The old tile was thicker than the planks I put down so what I ended up doing was going to the store and getting silicone shims. In some spots I had to use several, I tightened it down and it worked well. No movement at all. I’m not sure if what I did was right but it worked. To this day that toilet is still in operation and it hasn’t budged since.

SonnyBoy🇺🇸

486,800 Aufrufe • vor 10 Tagen