Video wird geladen...

Video konnte nicht geladen werden

Zur Startseite

Evaluating robot policies is hard. Ideally, instead of testing every new policy on a real robot, you could test in simulation; but simulations rarely correlate well with real-world performance. In order to make good, useful simulations, you need to spend a great deal of time and effort. That’s where...

RoboPapers's profile picture

RoboPapers

5,601 subscribers

14,689 Aufrufe • vor 5 Monaten •via X (Twitter)

LIVE

Anya Rossi• Live Now

Private livecam show

0 Kommentare

Keine Kommentare verfügbar

Kommentare vom Original-Post werden hier angezeigt

Ähnliche Videos

It’s long been a dream of roboticists to be able to teach a robot in simulation so as to skip the long and expensive process of collecting large amounts of real-world training data. However, building simulations for robot tasks is extremely hard. Ideally, we could go from real data to a useful simulation. This is exactly what Guangqi Jiang and his co-authors do. they use 3d Gaussian splatting to reconstructed scenes which let them create interactive environments that, when combined with a physcs engine, allow for training robot policies that show zero-shot sim-to-real transfer (i.e., using no real-world demonstrations). To learn more, watch Episode 56 of Robopapers with Michael Cho - Rbt/Acc and Chris Paxton now!
46:05

It’s long been a dream of roboticists to be able to teach a robot in simulation so as to skip the long and expensive process of collecting large amounts of real-world training data. However, building simulations for robot tasks is extremely hard. Ideally, we could go from real data to a useful simulation. This is exactly what Guangqi Jiang and his co-authors do. they use 3d Gaussian splatting to reconstructed scenes which let them create interactive environments that, when combined with a physcs engine, allow for training robot policies that show zero-shot sim-to-real transfer (i.e., using no real-world demonstrations). To learn more, watch Episode 56 of Robopapers with Michael Cho - Rbt/Acc and Chris Paxton now!

RoboPapers

20,434 Aufrufe • vor 6 Monaten

Robot policies must be both reliable and highly capable to be useful; the best way to achieve this level of performance is with reinforcement learning. However, for reinforcement learning you are usually stuck between two difficult options: reinforcement in the real world is often risky and expensive, while reinforcement learning in a traditional simulator takes a lot of engineering work and has a persistent sim-to-real gap. What if instead you could train your robot purely in a world model? RISE by Jiazhi Yang et al. uses a compositional world model to predict the future and evaluate progress. This allows for a self-improving pipeline, which learns a world model from real data and then learns how the robot should perform different tasks. This pipeline results in a data-driven way to improve policy performance from real data but without real-world reinforcement learning. Watch Episode #86 of RoboPapers, with Chris Paxton and Jiafei Duan, to learn more!
53:45

Robot policies must be both reliable and highly capable to be useful; the best way to achieve this level of performance is with reinforcement learning. However, for reinforcement learning you are usually stuck between two difficult options: reinforcement in the real world is often risky and expensive, while reinforcement learning in a traditional simulator takes a lot of engineering work and has a persistent sim-to-real gap. What if instead you could train your robot purely in a world model? RISE by Jiazhi Yang et al. uses a compositional world model to predict the future and evaluate progress. This allows for a self-improving pipeline, which learns a world model from real data and then learns how the robot should perform different tasks. This pipeline results in a data-driven way to improve policy performance from real data but without real-world reinforcement learning. Watch Episode #86 of RoboPapers, with Chris Paxton and Jiafei Duan, to learn more!

RoboPapers

38,334 Aufrufe • vor 1 Monat

Collecting robot data at scale is key to deploying working manipulation policies, and the team from Tutor Intelligence Tutor is here to tell us about how to accomplish it. Their new announcement: a massive, 100-robot “data factory,” with a behind-the-scenes look at how to build a teleoperation platform and how to make robots and policies that are useful for their customers. Tutor Intelligence is a full-stack robotics company: they build robot arms, they sell robot arms, they write the software and they train neural networks. Josh Gruenstein, Jesse Michel, Shiraz, and Joe McCalmon, and Joe McCalmon join us to tell us more about how they scale both teleop data and human interventions from their teleoperators in order to train the policies they need. Watch Episode #85 of RoboPapers, with Chris Paxton and Jiafei Duan, to learn more!
1:01:03

Collecting robot data at scale is key to deploying working manipulation policies, and the team from Tutor Intelligence Tutor is here to tell us about how to accomplish it. Their new announcement: a massive, 100-robot “data factory,” with a behind-the-scenes look at how to build a teleoperation platform and how to make robots and policies that are useful for their customers. Tutor Intelligence is a full-stack robotics company: they build robot arms, they sell robot arms, they write the software and they train neural networks. Josh Gruenstein, Jesse Michel, Shiraz, and Joe McCalmon, and Joe McCalmon join us to tell us more about how they scale both teleop data and human interventions from their teleoperators in order to train the policies they need. Watch Episode #85 of RoboPapers, with Chris Paxton and Jiafei Duan, to learn more!

RoboPapers

36,041 Aufrufe • vor 1 Monat

Teaching robots from human video is an important part of overcoming the “data gap” in robotics, but many of the details still need to be worked out. Homanga Bharadhwaj tells us about two recent research papers, Gen2Act and Spider, which go over different aspects of the problem: Gen2Act uses generative video models to create a reference of how a task should be performed given a language prompt; then, it uses a multi-purpose policy that can “translate” from human video to robot motion. However, Gen2Act has its limitations, in particular when it comes to dexterous, contact-rich tasks. That’s where SPIDER comes in: it uses human data together with simulation to train policies across many different humanoid hands and datasets. Also of note is that this is our first episode with our new rotating co-host, Jiafei Duan. To learn more, watch Episode #57 of RoboPapers now, with Chris Paxton and Jiafei Duan!
51:04

Teaching robots from human video is an important part of overcoming the “data gap” in robotics, but many of the details still need to be worked out. Homanga Bharadhwaj tells us about two recent research papers, Gen2Act and Spider, which go over different aspects of the problem: Gen2Act uses generative video models to create a reference of how a task should be performed given a language prompt; then, it uses a multi-purpose policy that can “translate” from human video to robot motion. However, Gen2Act has its limitations, in particular when it comes to dexterous, contact-rich tasks. That’s where SPIDER comes in: it uses human data together with simulation to train policies across many different humanoid hands and datasets. Also of note is that this is our first episode with our new rotating co-host, Jiafei Duan. To learn more, watch Episode #57 of RoboPapers now, with Chris Paxton and Jiafei Duan!

RoboPapers

24,286 Aufrufe • vor 6 Monaten

Every home is different. That means that to build a useful home robot, we must be able to perform zero-shot generalization on a wide range of tasks. Humanoid company 1X has a solution: world models. 1X Director of Evaluations Daniel Ho joins us on RoboPapers to talk about: - why world models are the future for scaling robot learning - how to use world models for robot control - what world models unlock for evaluating robot model performance - how we can hill-climb from here to general purpose robots Watch Episode #61 of RoboPapers, with Michael Cho - Rbt/Acc and Chris Paxton, now!
54:52

Every home is different. That means that to build a useful home robot, we must be able to perform zero-shot generalization on a wide range of tasks. Humanoid company 1X has a solution: world models. 1X Director of Evaluations Daniel Ho joins us on RoboPapers to talk about: - why world models are the future for scaling robot learning - how to use world models for robot control - what world models unlock for evaluating robot model performance - how we can hill-climb from here to general purpose robots Watch Episode #61 of RoboPapers, with Michael Cho - Rbt/Acc and Chris Paxton, now!

RoboPapers

27,567 Aufrufe • vor 5 Monaten

Pretraining is essential for good performance on a wide variety of robotics tasks, and so most vision-language-action models build off of a vision language model (VLM) trained on a wide variety of image-language data. But how does the choice of VLM translate to downstream robotics performance? Jianke Zhang and @GYanjiang join us to talk about this key part of the robot policy, looking at a wide variety of different VLMs and how they perform. Interestingly, they see that performance on auxiliary tasks like quesiton answering did not lead to downstream improvements in control. To learn more, watch episode 65 of RoboPapers now, with Chris Paxton and Jiafei Duan!
1:03:46

Pretraining is essential for good performance on a wide variety of robotics tasks, and so most vision-language-action models build off of a vision language model (VLM) trained on a wide variety of image-language data. But how does the choice of VLM translate to downstream robotics performance? Jianke Zhang and @GYanjiang join us to talk about this key part of the robot policy, looking at a wide variety of different VLMs and how they perform. Interestingly, they see that performance on auxiliary tasks like quesiton answering did not lead to downstream improvements in control. To learn more, watch episode 65 of RoboPapers now, with Chris Paxton and Jiafei Duan!

RoboPapers

23,905 Aufrufe • vor 4 Monaten

For robots to be useful, they must be able to interact with a wide variety of environments; and yet, scaling interaction data is difficult, expensive, and time consuming. Instead, much research revolves around sim-to-real manipulation — but mostly this has not been mobile manipulation. Recently, though, this has begun to change. Two recent papers from Tairan He and Haoru Xue show us how to unlock the potential of this technique, building policies which, without any real data at all, can move objects around in the world and open doors in the real world with a humanoid robot. Watch Episode #60 of RoboPapers now to learn more, hosted by Chris Paxton and Jiafei Duan. In this episode, we cover two papers:. First is VIRAL: Visual Sim-to-Real at Scale for Humanoid Loco-Manipulation; and second is DoorMan: Opening the Sim-to-Real Door for Humanoid Pixel-to-Action Policy Transfer.
1:13:32

For robots to be useful, they must be able to interact with a wide variety of environments; and yet, scaling interaction data is difficult, expensive, and time consuming. Instead, much research revolves around sim-to-real manipulation — but mostly this has not been mobile manipulation. Recently, though, this has begun to change. Two recent papers from Tairan He and Haoru Xue show us how to unlock the potential of this technique, building policies which, without any real data at all, can move objects around in the world and open doors in the real world with a humanoid robot. Watch Episode #60 of RoboPapers now to learn more, hosted by Chris Paxton and Jiafei Duan. In this episode, we cover two papers:. First is VIRAL: Visual Sim-to-Real at Scale for Humanoid Loco-Manipulation; and second is DoorMan: Opening the Sim-to-Real Door for Humanoid Pixel-to-Action Policy Transfer.

RoboPapers

30,767 Aufrufe • vor 5 Monaten

Evaluating robot policies is hard. Every lab has a different robot; reproducible evaluations are really challenging. This makes it hard for us to know which methods for learning robot policies are likely to perform the best in real-world scenarios. Taking a page from LLM evaluations like Chatbot Arena, RoboArena aims to address this problem through crowdsourcing evaluations with a network of different evaluators. Watch Episode #34 of RoboPapers, hosted by Michael Cho - Rbt/Acc and Chris Paxton , now to learn more from authors Pranav Atreya and Karl Pertsch!
47:30

Evaluating robot policies is hard. Every lab has a different robot; reproducible evaluations are really challenging. This makes it hard for us to know which methods for learning robot policies are likely to perform the best in real-world scenarios. Taking a page from LLM evaluations like Chatbot Arena, RoboArena aims to address this problem through crowdsourcing evaluations with a network of different evaluators. Watch Episode #34 of RoboPapers, hosted by Michael Cho - Rbt/Acc and Chris Paxton , now to learn more from authors Pranav Atreya and Karl Pertsch!

RoboPapers

15,056 Aufrufe • vor 9 Monaten

Reinforcement on robots is highly limited by our ability to design good reward functions; this means that designing strong, generalizable reward functions is a key enabler to progress on real-world reinforcement learning. But we already have a very general class of models: VLMs. Wouldn’t it be great if you could just use a VLM to generate rewards, then? TOPReward directly generates rewards from the probability of the “True” token of a VLM question-answering response; this makes it easy to implement, incredibly general, and surprisingly powerful. We talked to Shirui and Cole Harrison to learn more. Watch Episode#75 of RoboPapers now to learn more, with Chris Paxton and Jiafei Duan!
1:01:20

Reinforcement on robots is highly limited by our ability to design good reward functions; this means that designing strong, generalizable reward functions is a key enabler to progress on real-world reinforcement learning. But we already have a very general class of models: VLMs. Wouldn’t it be great if you could just use a VLM to generate rewards, then? TOPReward directly generates rewards from the probability of the “True” token of a VLM question-answering response; this makes it easy to implement, incredibly general, and surprisingly powerful. We talked to Shirui and Cole Harrison to learn more. Watch Episode#75 of RoboPapers now to learn more, with Chris Paxton and Jiafei Duan!

RoboPapers

13,185 Aufrufe • vor 2 Monaten

In order for robots to be deployed in the real world, performing tasks of real value, they must be reliable. Unfortunately, even more, most robotic demos work maybe 70-80% of the time at best. The way to get better reliability is to do real-world reinforcement learning: having the robot teach itself how to perform the task up to a high level of success. The key to doing this is to start with a core of expert human data, use that to train a policy then iteratively improve it, until finally finishing with on-policy reinforcement learning. Kun Lei talks through a unified framework for imitation and reinforcement learning based on PPO, which enables this improvement process. In this episode, Kun Lei explains the theory behind his reinforcement learning method and how it allowed his robot to run in a shopping mall juicing oranges for seven hours at a time, among experiments on a wide variety of tasks and embodiments. Watch episode 58 of RoboPapers now, hosted by Michael Cho - Rbt/Acc and Chris Paxton!
1:11:51

In order for robots to be deployed in the real world, performing tasks of real value, they must be reliable. Unfortunately, even more, most robotic demos work maybe 70-80% of the time at best. The way to get better reliability is to do real-world reinforcement learning: having the robot teach itself how to perform the task up to a high level of success. The key to doing this is to start with a core of expert human data, use that to train a policy then iteratively improve it, until finally finishing with on-policy reinforcement learning. Kun Lei talks through a unified framework for imitation and reinforcement learning based on PPO, which enables this improvement process. In this episode, Kun Lei explains the theory behind his reinforcement learning method and how it allowed his robot to run in a shopping mall juicing oranges for seven hours at a time, among experiments on a wide variety of tasks and embodiments. Watch episode 58 of RoboPapers now, hosted by Michael Cho - Rbt/Acc and Chris Paxton!

RoboPapers

18,813 Aufrufe • vor 6 Monaten

Spatial understanding is important to moving around in complex environments and is a huge part of the challenge of generalizing to new scenes. Most world models, however, largely ignore this spatial dimension, focusing on 2D images. Not PointWorld, though. PointWorld is a 3D world model trained from real and simulated data which can perform a wide variety of manipulation tasks on a real robot, including grasping or handling articulated objects, all without any additional fine tuning. Wenlong Huang joins us to tell us more about what makes this work and how it’s different from other world models. Watch Episode #83 of RoboPapers, with Chris Paxton and Jiafei Duan, to learn more!
1:22:44

Spatial understanding is important to moving around in complex environments and is a huge part of the challenge of generalizing to new scenes. Most world models, however, largely ignore this spatial dimension, focusing on 2D images. Not PointWorld, though. PointWorld is a 3D world model trained from real and simulated data which can perform a wide variety of manipulation tasks on a real robot, including grasping or handling articulated objects, all without any additional fine tuning. Wenlong Huang joins us to tell us more about what makes this work and how it’s different from other world models. Watch Episode #83 of RoboPapers, with Chris Paxton and Jiafei Duan, to learn more!

RoboPapers

16,197 Aufrufe • vor 1 Monat

Sports like tennis are great examples of the sort of dynamic whole-body interaction that’s possible with humanoid robots. But capturing examples of fast, dynamic interactions from humans is really difficult. Enter LATENT, which uses lower-quality human data plus reinforcement learning to teach a robot to play tennis, able to complete back-and-forth volleys at a human level. LATENT has three steps: (1) collecting imperfect human data like a backswing, (2) using these to learn a latent action space, and (3) they train a high-level policy in simulation which can compose these actions and execute tennis skills on a robot. Haofei Lu and Yunrui Lian join us to tell us about their method. Watch Episode #80 of RoboPapers, with Chris Paxton and Jiafei Duan, now to learn more!
55:30

Sports like tennis are great examples of the sort of dynamic whole-body interaction that’s possible with humanoid robots. But capturing examples of fast, dynamic interactions from humans is really difficult. Enter LATENT, which uses lower-quality human data plus reinforcement learning to teach a robot to play tennis, able to complete back-and-forth volleys at a human level. LATENT has three steps: (1) collecting imperfect human data like a backswing, (2) using these to learn a latent action space, and (3) they train a high-level policy in simulation which can compose these actions and execute tennis skills on a robot. Haofei Lu and Yunrui Lian join us to tell us about their method. Watch Episode #80 of RoboPapers, with Chris Paxton and Jiafei Duan, now to learn more!

RoboPapers

29,923 Aufrufe • vor 2 Monaten

Given the strong community adoption and real-world deployment of MolmoAct2 on YAM, we're introducing zero-shot evaluation of MolmoAct2 Bimanual YAM in simulation. Now you can test out our models without a real-world robot and build on them! Code: Simulation built on Maniskill!
0:20

Given the strong community adoption and real-world deployment of MolmoAct2 on YAM, we're introducing zero-shot evaluation of MolmoAct2 Bimanual YAM in simulation. Now you can test out our models without a real-world robot and build on them! Code: Simulation built on Maniskill!

Jiafei Duan

36,290 Aufrufe • vor 1 Monat

For robots to be useful, they can’t just dance — they must be able to physically interact with the world around them. Unfortunately, the sorts of motion tracking policies you see performing dancing or martial arts are not really capable of the kind of precise, forceful interaction needed to perform useful interactions with the world. Siheng Zhao and Yanjie Ze join us to talk about ResMimic, their new paper which takes a general-purpose human motion-tracking policy and improves it with a residual policy to reliably interact with objects To learn more, watch Episode #47 of RoboPapers, hosted by Michael Cho - Rbt/Acc and Chris Paxton, today!
48:40

For robots to be useful, they can’t just dance — they must be able to physically interact with the world around them. Unfortunately, the sorts of motion tracking policies you see performing dancing or martial arts are not really capable of the kind of precise, forceful interaction needed to perform useful interactions with the world. Siheng Zhao and Yanjie Ze join us to talk about ResMimic, their new paper which takes a general-purpose human motion-tracking policy and improves it with a residual policy to reliably interact with objects To learn more, watch Episode #47 of RoboPapers, hosted by Michael Cho - Rbt/Acc and Chris Paxton, today!

RoboPapers

11,399 Aufrufe • vor 7 Monaten

Teaching robots to perform dexterous manipulation tasks currently requires teleoperation, which limits demonstration quality, speed, and scalability. Instead, why not use human videos? The problem is that a human hand isn’t a robot hand, so data must be retargeted using simulation to resolve issues like collisions and interpenetration when controlling the hand. In VideoManip, Hongyi Chen and co-authors built a system to solve this problem, taking in RGB videos of humans performing manipulation tasks and using them to create accurate simulations with which to learn robot policies. Watch episode #73 of RoboPapers, hosted by Michael Cho - Rbt/Acc and Chris Paxton, now to learn more!
44:20

Teaching robots to perform dexterous manipulation tasks currently requires teleoperation, which limits demonstration quality, speed, and scalability. Instead, why not use human videos? The problem is that a human hand isn’t a robot hand, so data must be retargeted using simulation to resolve issues like collisions and interpenetration when controlling the hand. In VideoManip, Hongyi Chen and co-authors built a system to solve this problem, taking in RGB videos of humans performing manipulation tasks and using them to create accurate simulations with which to learn robot policies. Watch episode #73 of RoboPapers, hosted by Michael Cho - Rbt/Acc and Chris Paxton, now to learn more!

RoboPapers

27,249 Aufrufe • vor 3 Monaten

Robots, unfortunately, tend to be expensive. And finding a robot that’s both capable of performing a wide variety of mobile manipulation tasks, and is affordable and “hackable”, is extremely difficult. Many different problems need to be addressed, from arm control to navigation to integrating your data collection strategy into hardware design. This can make it difficult for all but the most well-funded teams to “scale” real-world robotics research. Fortunately, the team behind Build Your Own Robot has a solution. Manan Anjaria, Mahi Shafiullah 🏠🤖,Jeff Cui, and Enes Erciyes joined us to talk about how they build a fully open-source mobile manipulator out of off-the-shelf parts, which has humanlike range of motion, and can perform a wide variety of tasks, all while being only roughly $10,000 to build. Watch Episode 71 of RoboPapers, with Michael Cho - Rbt/Acc and Chris Paxton, today to learn more!
1:01:11

Robots, unfortunately, tend to be expensive. And finding a robot that’s both capable of performing a wide variety of mobile manipulation tasks, and is affordable and “hackable”, is extremely difficult. Many different problems need to be addressed, from arm control to navigation to integrating your data collection strategy into hardware design. This can make it difficult for all but the most well-funded teams to “scale” real-world robotics research. Fortunately, the team behind Build Your Own Robot has a solution. Manan Anjaria, Mahi Shafiullah 🏠🤖,Jeff Cui, and Enes Erciyes joined us to talk about how they build a fully open-source mobile manipulator out of off-the-shelf parts, which has humanlike range of motion, and can perform a wide variety of tasks, all while being only roughly $10,000 to build. Watch Episode 71 of RoboPapers, with Michael Cho - Rbt/Acc and Chris Paxton, today to learn more!

RoboPapers

34,151 Aufrufe • vor 3 Monaten

📢 Announcing one of the most exciting works from us this year on **scalable robot policy evaluation through real-to-sim transfer**, moving toward a scalable evaluation engine with structured world models that capture the appearance, geometry, and dynamics of environments involving deformable objects. 🤖 Evaluation remains one of the biggest bottlenecks in building general-purpose robots. Today, robots are still evaluated only in the real world, which is **orders of magnitude slower** than the development of language agents. We propose a new framework where simulation performance **strongly correlates** with the real world (r > 0.9), even for deformable objects. The key difference from existing work lies in the correlation between simulation and reality: if a robot model performs better in the digital world, does it also perform better in the real world? This question has long made people hesitant about simulation-based evaluation — especially for deformable objects. We are changing that. Our pipeline achieves effective real-to-sim transfer, establishing **state-of-the-art correlation** between simulation and reality for deformable object manipulation. It provides a **scalable and reproducible evaluation engine** for robot learning. 🌐
3:04

📢 Announcing one of the most exciting works from us this year on **scalable robot policy evaluation through real-to-sim transfer**, moving toward a scalable evaluation engine with structured world models that capture the appearance, geometry, and dynamics of environments involving deformable objects. 🤖 Evaluation remains one of the biggest bottlenecks in building general-purpose robots. Today, robots are still evaluated only in the real world, which is **orders of magnitude slower** than the development of language agents. We propose a new framework where simulation performance **strongly correlates** with the real world (r > 0.9), even for deformable objects. The key difference from existing work lies in the correlation between simulation and reality: if a robot model performs better in the digital world, does it also perform better in the real world? This question has long made people hesitant about simulation-based evaluation — especially for deformable objects. We are changing that. Our pipeline achieves effective real-to-sim transfer, establishing **state-of-the-art correlation** between simulation and reality for deformable object manipulation. It provides a **scalable and reproducible evaluation engine** for robot learning. 🌐

Yunzhu Li

39,900 Aufrufe • vor 8 Monaten

Just collecting manipulation data isn’t enough for robots - they need to be able to move around in the world, which has a whole different set of challenges from pure manipulation. And bringing navigation and manipulation together in a single framework is even more challenging. Enter HERMES, from Zhecheng Yuan and Tianming Wei. This is a four-stage process in which human videos are used to set up an RL sim-to-real training pipeline in order to overcome differences between robot and human kinematics, and used together with a navigation foundation model to move around in a variety of environments. To learn more, join us as Zhecheng Yuan and Tianming Wei tell us about how they built their system to perform mobile dexterous manipulation from human videos in a variety of environments. Watch Episode #45 of RoboPapers today, hosted by Michael Cho - Rbt/Acc and Chris Paxton!
1:01:08

Just collecting manipulation data isn’t enough for robots - they need to be able to move around in the world, which has a whole different set of challenges from pure manipulation. And bringing navigation and manipulation together in a single framework is even more challenging. Enter HERMES, from Zhecheng Yuan and Tianming Wei. This is a four-stage process in which human videos are used to set up an RL sim-to-real training pipeline in order to overcome differences between robot and human kinematics, and used together with a navigation foundation model to move around in a variety of environments. To learn more, join us as Zhecheng Yuan and Tianming Wei tell us about how they built their system to perform mobile dexterous manipulation from human videos in a variety of environments. Watch Episode #45 of RoboPapers today, hosted by Michael Cho - Rbt/Acc and Chris Paxton!

RoboPapers

15,045 Aufrufe • vor 7 Monaten

Co-training has become a key part of the recipe for training large robotics models; it means that you mix some proportion of real robot data with other data sources, like simulation or egocentric human video data. This is especially important because robotics data tends to lack diversity which can be somewhat compensated for by the inclusion of these other modalities. And yet there has not been a sizable study on what constitute good practices for cotraining until now! We talk to Fanqi Lin and Jose Barreiros about their new work, a massive study which evaluated 89 policies over thousands of rollouts to tell us which forms of co-training were most useful for robotics. Watch episode 70 of RoboPapers, with Michael Cho and Chris Paxton, now!
1:24:52

Co-training has become a key part of the recipe for training large robotics models; it means that you mix some proportion of real robot data with other data sources, like simulation or egocentric human video data. This is especially important because robotics data tends to lack diversity which can be somewhat compensated for by the inclusion of these other modalities. And yet there has not been a sizable study on what constitute good practices for cotraining until now! We talk to Fanqi Lin and Jose Barreiros about their new work, a massive study which evaluated 89 policies over thousands of rollouts to tell us which forms of co-training were most useful for robotics. Watch episode 70 of RoboPapers, with Michael Cho and Chris Paxton, now!

RoboPapers

19,152 Aufrufe • vor 3 Monaten

How can we build robotic hands with truly superhuman dexterity? Daxo Robotics is developing a unique tendon-driven soft robot hand, which aims to be tougher and more capable than a traditional humanoid hand. Each finger consists of many different tendons, which act in concert to move or manipulate. This is a special episode of RoboPapers where, instead of talking about a scientific paper, we talk to Tom Zhang, founder of Daxo Robotics, in order to learn both about his background and about how this one-of-a-kind robot hand design works. Watch Episode #40 of RoboPapers with Michael Cho - Rbt/Acc and Chris Paxton now!
1:01:15

How can we build robotic hands with truly superhuman dexterity? Daxo Robotics is developing a unique tendon-driven soft robot hand, which aims to be tougher and more capable than a traditional humanoid hand. Each finger consists of many different tendons, which act in concert to move or manipulate. This is a special episode of RoboPapers where, instead of talking about a scientific paper, we talk to Tom Zhang, founder of Daxo Robotics, in order to learn both about his background and about how this one-of-a-kind robot hand design works. Watch Episode #40 of RoboPapers with Michael Cho - Rbt/Acc and Chris Paxton now!

RoboPapers

16,171 Aufrufe • vor 8 Monaten