Video yükleniyor...

Video Yüklenemedi

Bu video yüklenirken bir sorun oluştu. Bu geçici bir ağ sorunundan kaynaklanıyor olabilir veya video kullanılamıyor olabilir.

Ana Sayfaya Dön

Hello Hugh Thomas , let’s do it one by one, sample by sample, stone by stone. Whenever an artificial stone recipe of mine reaches a certain stage that’s the results are comparable to the natural version I’ll send a cast sample to you (with its mold) to analyze. The... first one could be this perfectly chiseled fake limestone cube. As you can see you can’t fit a razor blade between the stone and the cheap silicone mold from Temu. This proves my micro chiseling skills. The recipe is public, you don’t even need my cube, you could create your own - but you won’t. So I’ll send this cute cube to you. The “secret” recipe is: I started from wood ash lye, also called potash, or K2CO3, by slowly dripping water through hard wood ash. Hard wood ash from your fireplace, yeah. Then I added slaked lime, and the chemical reaction produced fine, molecular level CaCO3 particles, fine limestone floating in the liquid. FYI: the secret chemical reaction is, and was in the ancient times as well: K2CO3 + Ca(OH)2 = CaCO3 + 2KOH Yummy! Next step: I let the limestone particles settle, and poured the KOH, potassium hydroxide solution above (that also formed in the liquid, see above) into the kitchen sink as it is a very good drain cleaner indeed. I added water and poured it into the sink several times, trying to clean the slurry from the KOH. So yes, the cube is from almost pure limestone, CaCO3 - with some residual KOH contamination. The KOH contamination can be reduced infinitely, I just stopped after 4 rounds. (Pro tip: put the slurry into a filter bag and put the bag into a mountain creek for an hour.) The next step is filtering and pressing the remaining liquid from the slurry. Because it’s a wet mess at this point. Pressure is a key factor to success! At least one thing is accurate from the universal canon: no pressure-no stone. How do I know? By trying and failing a few (dozen) times. So I poured the white limestone slurry into a sock 🧦 and pressed and squeezed it by hand - and that was JUST enough pressure for the magic to happen 😮 It looks like nature/god is on our side, everything is working as it was designed this way. Then I put the almost dry limestone paste into this Temu mold. Fun fact: it still contains a lot of water which will eventually be pressed out as the crystallization progresses, so we’ll need to get rid of that water through a hole, a nub. But there is no hole 🕳️ on this Temu mold so I poured the excess liquid from the top a few times. Hardening time=drying time=crystallization time : 1 week. The important lesson I learned from this experience is as follows: I tried to understand why this sludge turned into hard stone, because, as we were told, IT IS IMPOSSIBLE, and my understanding is this: wood ash lye does two different magics in parallel for this to happen: 1. It magically contains the right kind of contamination to facilitate calcite crystal formation and 2. The incredibly high pH (remember, 2 molecules of KOH are produced from 1 molecule of K2CO3!) in the liquid boost the calcite formation even more. ———- My only request from you and your colleagues concerning this analysis is full, 100000% transparency. And be honest. I know something you clearly don’t: you have lost this battle already. We need the data fast, not in 4 years or something. Transparency means sharing whatever you find here on X, without scientific drama and pullbacks. We don’t need a 947 pages scientific paper. We need the results, the data only. BTW: I already know what you will find: a “special type of natural limestone” with some minimal potassium contamination🤣🤣🤣 Now feel free to DM me, let this scientific analysis happen! And thank you for your offer!show more

Marcell Fóti 🪨

30,387 subscribers

39,910 görüntüleme • 1 ay önce •via X (Twitter)

Bilim & Teknoloji Eğitim

Anya Rossi• Live Now

Private livecam show

0 Yorum

Yorum bulunmuyor

Orijinal gönderinin yorumları burada görünecek

Benzer Videolar

And this? This is the very first piece of artificial limestone, YES, CaCO3, YES, hard as f and YES, waterproof, what I made from… Wood ash ONLY!!! 100% caveman tech! Now look at the color of this thing. How would you describe it? May I say it has the color of the pyramids? Hell yeah! Why? BTW: this is just the binder. Add original, natural limestone and fossils and you’ll en up with “natural” limestone. (With a bit of potassium residue.) Any questions? The secret recipe maybe? Anyone interested? Here you go: 1. Burn 🔥 everything around you and collect the wood ash 2. Burn natural limestone (calcination) to produce quick lime Steps 1. and 2. can be combined into one step. 3. Make wood ash lye the traditional way, by dripping drip 💧 water on wood ash and collecting the water that went through the ash. Any vessel will do but an oak barrel is the traditional way doing it. I used a plastic bucket with holes at the bottom. The wood ash lye is mostly KOH and K2CO3. What we need is CaCO3. We need to change the letter K to letters Ca. We’ll do it by adding the letters Ca to the liquid. 4. Add quick lime (CaO) or hydrated lime, slaked lime (Ca(OH)2) to the lye until it stops bubbling in vinegar. (We badly miss a decent video at this point, Marcell!!!) 5. Add (or don’t add) fossils = natural limestone rubble to the mix, stir well 6. Get rid of of the excess liquid through a nub Now any expert can tell you that this will never make a stone because of two reasons: 1. Billions of years and 2. High pressure are needed Well, no. The first point is just total nonsense, and although the second has something in it, it is false. Virtually ANY pressure will make it, including my current technique of squeezing it in a kitchen cloth. I’m not kidding. No pressure- no stone, that is correct. But only a minimal level of pressure, using my bare hands is enough to push the freshly made CaCO3 molecules close enough for crystallization (calcit) to begin. And here we are.

And this? This is the very first piece of artificial limestone, YES, CaCO3, YES, hard as f and YES, waterproof, what I made from… Wood ash ONLY!!! 100% caveman tech! Now look at the color of this thing. How would you describe it? May I say it has the color of the pyramids? Hell yeah! Why? BTW: this is just the binder. Add original, natural limestone and fossils and you’ll en up with “natural” limestone. (With a bit of potassium residue.) Any questions? The secret recipe maybe? Anyone interested? Here you go: 1. Burn 🔥 everything around you and collect the wood ash 2. Burn natural limestone (calcination) to produce quick lime Steps 1. and 2. can be combined into one step. 3. Make wood ash lye the traditional way, by dripping drip 💧 water on wood ash and collecting the water that went through the ash. Any vessel will do but an oak barrel is the traditional way doing it. I used a plastic bucket with holes at the bottom. The wood ash lye is mostly KOH and K2CO3. What we need is CaCO3. We need to change the letter K to letters Ca. We’ll do it by adding the letters Ca to the liquid. 4. Add quick lime (CaO) or hydrated lime, slaked lime (Ca(OH)2) to the lye until it stops bubbling in vinegar. (We badly miss a decent video at this point, Marcell!!!) 5. Add (or don’t add) fossils = natural limestone rubble to the mix, stir well 6. Get rid of of the excess liquid through a nub Now any expert can tell you that this will never make a stone because of two reasons: 1. Billions of years and 2. High pressure are needed Well, no. The first point is just total nonsense, and although the second has something in it, it is false. Virtually ANY pressure will make it, including my current technique of squeezing it in a kitchen cloth. I’m not kidding. No pressure- no stone, that is correct. But only a minimal level of pressure, using my bare hands is enough to push the freshly made CaCO3 molecules close enough for crystallization (calcit) to begin. And here we are.

Marcell Fóti 🪨

59,106 görüntüleme • 4 ay önce

And finally! The Holy Grail! The Artificial Granite! Using Caveman Resources Only! Oh, this was a painful and long development process! Just in time! I have almost deleted this chapter from my new book as this thing nearly missed the deadline! But luckily 🍀 Is there quartz in it? Yeees! A lot! In fact, as many as I want: I can mix aaanything into this material, including quartz grains. (In fact I can create stone even from 🐴 💩 or whatever 🤣) Is the binder SiO2, to fool archeologists using mass spectrometry and XRF? Yeeees! Indeed! But is the binder quartz? Noooo! (Btw: this👆🏻would be the right question to ask.) Can we tell the quarry of this artificial stone ball using the common analysis tools? Sure, we can! This “carved” granite ball is from South Africa, so some 10.000 kms away. It was carved there and shipped to Hungary - in a paper bag as a powder 🤣 Is it waterproof? Yes. Boiling proof? Yes. Acid proof? Yes. Alkali proof? Yes. Mohs scale: 6-7 Ideal to fool unsuspecting people. Ingredients: • Waterglass • “Secret ingredient” I’ll reveal later • Billion years old, natural granite powder • created on room temperature I also attached the video of the 20 minutes boiling test. (Explain this to me: why do we exactly expect the glass binder to fall apart in boiling water? Glass is glass.) Ah! Almost forgot! Do you need a nub to create it in large size? It depends. If you happen to build a wall from it, then… Absolutely! This mix releases so much water it’s unbelievable! You need to drain it or else you find your stone in a puddle. Bubbles 🫧? Glad you asked. None. This is a “dry” technology, meaning: you press the water out from the mix, from a semi-dry material. Jimmy Corsetti you asked the first piece of the artificial granite. No luck, you’ll not get it. You know exactly why. (Just between you and me) Brian Roemmele I think this development is important Joe Rogan I’m ready to tell you the secret first as someone who did a lot of things to clear the picture of the ancient past. Ben van Kerkwyk - UnchartedX I learned a lot from your excellent videos. One day I’ll cast precision stone vases 🏺 for you! 😉 The Land Of Chem you are my hero @CosmicSummit24 George Howard I’m ready. 2025 will be “the year”! Now please share this info to the world. This knowledge is important. Even if our current generation will not accept it. I don’t care, we’ll die out sooner or later, and the next gen will take it as granted. As always. This is human nature. Someone please tell Joe Rogan that I’m both ready and open to cast a fake granite in his show in live revealing the secret.

And finally! The Holy Grail! The Artificial Granite! Using Caveman Resources Only! Oh, this was a painful and long development process! Just in time! I have almost deleted this chapter from my new book as this thing nearly missed the deadline! But luckily 🍀 Is there quartz in it? Yeees! A lot! In fact, as many as I want: I can mix aaanything into this material, including quartz grains. (In fact I can create stone even from 🐴 💩 or whatever 🤣) Is the binder SiO2, to fool archeologists using mass spectrometry and XRF? Yeeees! Indeed! But is the binder quartz? Noooo! (Btw: this👆🏻would be the right question to ask.) Can we tell the quarry of this artificial stone ball using the common analysis tools? Sure, we can! This “carved” granite ball is from South Africa, so some 10.000 kms away. It was carved there and shipped to Hungary - in a paper bag as a powder 🤣 Is it waterproof? Yes. Boiling proof? Yes. Acid proof? Yes. Alkali proof? Yes. Mohs scale: 6-7 Ideal to fool unsuspecting people. Ingredients: • Waterglass • “Secret ingredient” I’ll reveal later • Billion years old, natural granite powder • created on room temperature I also attached the video of the 20 minutes boiling test. (Explain this to me: why do we exactly expect the glass binder to fall apart in boiling water? Glass is glass.) Ah! Almost forgot! Do you need a nub to create it in large size? It depends. If you happen to build a wall from it, then… Absolutely! This mix releases so much water it’s unbelievable! You need to drain it or else you find your stone in a puddle. Bubbles 🫧? Glad you asked. None. This is a “dry” technology, meaning: you press the water out from the mix, from a semi-dry material. Jimmy Corsetti you asked the first piece of the artificial granite. No luck, you’ll not get it. You know exactly why. (Just between you and me) Brian Roemmele I think this development is important Joe Rogan I’m ready to tell you the secret first as someone who did a lot of things to clear the picture of the ancient past. Ben van Kerkwyk - UnchartedX I learned a lot from your excellent videos. One day I’ll cast precision stone vases 🏺 for you! 😉 The Land Of Chem you are my hero @CosmicSummit24 George Howard I’m ready. 2025 will be “the year”! Now please share this info to the world. This knowledge is important. Even if our current generation will not accept it. I don’t care, we’ll die out sooner or later, and the next gen will take it as granted. As always. This is human nature. Someone please tell Joe Rogan that I’m both ready and open to cast a fake granite in his show in live revealing the secret.

Marcell Fóti 🪨

42,705 görüntüleme • 1 yıl önce

And now, the recipe for the room-temperature glass layer… although unfortunately, you probably won’t get very far with it. The reason I haven’t shared the recipe until now is because I wanted to keep the Nobel Prize all to myself. NO. It’s because I spent the last two weeks trying to eliminate one component from the equation — a component that is almost certainly not something the average modern household has lying around. But now I’m going on vacation 🏝️, and obviously I’m not taking my labs with me. I’m not going to continue the experiments, I won’t be posting either, so it’s going to look as if I’ve simply disappeared. “Look, the guy tricked us and then disappeared without a trace!” Well, no. The result is real, the recipe is simple — you just probably won’t have the starting material you need. And despite struggling with this for two weeks, I couldn’t find a substitute for it. But maybe you will! 👍🏻 So I’m sharing the recipe as I currently know it, exactly as it is, in case someone can take it further while I’m sitting on a beach getting a tan. All I ask is that if someone manages to completely solve this mystery while I’m away, please consider a shared Nobel Prize! 🤪 So, the “secret ingredient” is none other than old, completely whitened, end-of-life waterglass. Yep. The stone shown in the video is proof that the glass layer is actually a precipitation. The layer is present on one side of the stone, but completely absent on the other side, even though the stone was standing vertically in the solution. Don’t let the visibly rough condition of the glass layer fool you — this was the first one, and I subjected it to all kinds of tests - too early. The important thing is that there is glass on one side, and ABSOLUTELY NONE on the other, even though the stone was standing vertically in the solution! So this isn’t the bottom and the top of the stone. It’s the right and left sides. Yeah. The glass is indeed a preipitated layer. So let me explain in detail what I did the first time I got this result. This stone was cast in that sour cream container (so it is an artificial one), and then I cut it in half with an angle grinder because I wanted to see what was inside. The inside was quite crumbly, so I decided to strengthen it. I soaked it in this, then that, then something else, impregnated it with one thing and then another, thinking that eventually it would become stronger. And while doing all this, I dipped the stone into all kinds of things. Ash lye, wine, waterglass, God knows what else. At this point, it doesn’t really matter. The funny thing is that now, having reconstructed what actually happened, I wasn’t trying to create a glass layer at all. I was simply trying to strengthen a crumbly stone. But there wasn’t enough waterglass in the lab to completely cover the stone standing in the container. Fill up with water? Nooo! I didn’t want to dilute it with water, so I started looking around in the cupboard and found a bottle of waterglass that was more than a year old and had already turned completely white. I poured this waterglass into the container on ONE SIDE of the stone. And I really mean one side. I did NOT mix it. I thought the waterglass will be "smart enough" to mix its old self with its new self. But the old one didn’t flow around to the other side. It simply accumulated against this curved surface of the stone and deposited there. The best evidence that this is exactly what happened is that even toward the edge of the curved section, the layer wasn’t nearly as thick as it was where I actually poured the old waterglass. And on the cut side of the stone, where I DID NOT pour any old waterglass, absolutely nothing was deposited. And this old waterglass is the thing you probably don’t have at home. Because modern people simply throw this stuff away. “It’s gone bad. Into the trash.” I spent the last couple of weeks trying to find an alternative solution that doesn’t require this old waterglass. Exactly so that I could start public beta testing. I didn’t want to release a recipe that would require you to wait an entire year to have one of the ingredients before you could even start experimenting with it. So I tried artificially aging the waterglass using all sorts of methods — baking soda, acids, slaked lime, carbon dioxide — but none of them produced suspended particles in the waterglass. So far, only waiting did. I did, however, lose a SodaStream machine in the process. RIP. 🪦 So, for now, the answer seems to be: either wait a year, or find some old waterglass in your cupboard. I haven’t found another way. Over the past few weeks, a few people volunteered to beta-test the process. But I only chose people who have been working with me for a long time, so there was at least a chance that they might have some old waterglass, or artificial stone, or both, at home. Mondo Mondo in Australia actually did the experiment, and it worked. I don’t know the Canadian guy, Odhinn , so I have absolutely no idea how he did it. Mondo’s waterglass wasn’t completely white, but it was thicker than normal — 46% from the shop — and it was at least six months old. Bingo. The experiment worked for him. What’s interesting is that once I finally identified the old waterglass as the responsible component, I tried using it directly — just soaking stones in the old waterglass by itself. And that didn’t work 😵 The important thing is (?) the mixture and ratio of fresh and old waterglass. Something like two-thirds fresh waterglass and one-third completely whitened, old waterglass. The explanation may be the following — and this isn’t me saying it, it's Mr. Grok: "The old waterglass provides the amorphous silica nuclei that are essential for the precipitation, while the fresh waterglass provides the chemical activity and high pH that keep the whole process going." Okay! There’s one more thing I need to add. I was only able to create really thick precipitated layers on artificial stones. All the other thick layers, such as the ones on granite or eggshell, were not precipitation. Those were simply the thickened sludge that had formed, which I then smeared onto the surface. Because when an artificial stone is dipped into the magical mixture, it somehow thickens the entire mixture. Even in the last experiment, when I thought the egg was responsible for thickening the magical mixture, there was actually a small piece of artificial stone sitting in the corner of the container. From there, suspicious brownish streams were spreading in every direction. In other words, the artificial stone was releasing something that caused the entire mixture to turn into a gel. So, that’s where we are right now. Feel free to experiment. As far as I know, apart from the half-dead waterglass, I haven’t found another method that works. And now, my flight is about to leave. ✈️

And now, the recipe for the room-temperature glass layer… although unfortunately, you probably won’t get very far with it. The reason I haven’t shared the recipe until now is because I wanted to keep the Nobel Prize all to myself. NO. It’s because I spent the last two weeks trying to eliminate one component from the equation — a component that is almost certainly not something the average modern household has lying around. But now I’m going on vacation 🏝️, and obviously I’m not taking my labs with me. I’m not going to continue the experiments, I won’t be posting either, so it’s going to look as if I’ve simply disappeared. “Look, the guy tricked us and then disappeared without a trace!” Well, no. The result is real, the recipe is simple — you just probably won’t have the starting material you need. And despite struggling with this for two weeks, I couldn’t find a substitute for it. But maybe you will! 👍🏻 So I’m sharing the recipe as I currently know it, exactly as it is, in case someone can take it further while I’m sitting on a beach getting a tan. All I ask is that if someone manages to completely solve this mystery while I’m away, please consider a shared Nobel Prize! 🤪 So, the “secret ingredient” is none other than old, completely whitened, end-of-life waterglass. Yep. The stone shown in the video is proof that the glass layer is actually a precipitation. The layer is present on one side of the stone, but completely absent on the other side, even though the stone was standing vertically in the solution. Don’t let the visibly rough condition of the glass layer fool you — this was the first one, and I subjected it to all kinds of tests - too early. The important thing is that there is glass on one side, and ABSOLUTELY NONE on the other, even though the stone was standing vertically in the solution! So this isn’t the bottom and the top of the stone. It’s the right and left sides. Yeah. The glass is indeed a preipitated layer. So let me explain in detail what I did the first time I got this result. This stone was cast in that sour cream container (so it is an artificial one), and then I cut it in half with an angle grinder because I wanted to see what was inside. The inside was quite crumbly, so I decided to strengthen it. I soaked it in this, then that, then something else, impregnated it with one thing and then another, thinking that eventually it would become stronger. And while doing all this, I dipped the stone into all kinds of things. Ash lye, wine, waterglass, God knows what else. At this point, it doesn’t really matter. The funny thing is that now, having reconstructed what actually happened, I wasn’t trying to create a glass layer at all. I was simply trying to strengthen a crumbly stone. But there wasn’t enough waterglass in the lab to completely cover the stone standing in the container. Fill up with water? Nooo! I didn’t want to dilute it with water, so I started looking around in the cupboard and found a bottle of waterglass that was more than a year old and had already turned completely white. I poured this waterglass into the container on ONE SIDE of the stone. And I really mean one side. I did NOT mix it. I thought the waterglass will be "smart enough" to mix its old self with its new self. But the old one didn’t flow around to the other side. It simply accumulated against this curved surface of the stone and deposited there. The best evidence that this is exactly what happened is that even toward the edge of the curved section, the layer wasn’t nearly as thick as it was where I actually poured the old waterglass. And on the cut side of the stone, where I DID NOT pour any old waterglass, absolutely nothing was deposited. And this old waterglass is the thing you probably don’t have at home. Because modern people simply throw this stuff away. “It’s gone bad. Into the trash.” I spent the last couple of weeks trying to find an alternative solution that doesn’t require this old waterglass. Exactly so that I could start public beta testing. I didn’t want to release a recipe that would require you to wait an entire year to have one of the ingredients before you could even start experimenting with it. So I tried artificially aging the waterglass using all sorts of methods — baking soda, acids, slaked lime, carbon dioxide — but none of them produced suspended particles in the waterglass. So far, only waiting did. I did, however, lose a SodaStream machine in the process. RIP. 🪦 So, for now, the answer seems to be: either wait a year, or find some old waterglass in your cupboard. I haven’t found another way. Over the past few weeks, a few people volunteered to beta-test the process. But I only chose people who have been working with me for a long time, so there was at least a chance that they might have some old waterglass, or artificial stone, or both, at home. Mondo Mondo in Australia actually did the experiment, and it worked. I don’t know the Canadian guy, Odhinn , so I have absolutely no idea how he did it. Mondo’s waterglass wasn’t completely white, but it was thicker than normal — 46% from the shop — and it was at least six months old. Bingo. The experiment worked for him. What’s interesting is that once I finally identified the old waterglass as the responsible component, I tried using it directly — just soaking stones in the old waterglass by itself. And that didn’t work 😵 The important thing is (?) the mixture and ratio of fresh and old waterglass. Something like two-thirds fresh waterglass and one-third completely whitened, old waterglass. The explanation may be the following — and this isn’t me saying it, it's Mr. Grok: "The old waterglass provides the amorphous silica nuclei that are essential for the precipitation, while the fresh waterglass provides the chemical activity and high pH that keep the whole process going." Okay! There’s one more thing I need to add. I was only able to create really thick precipitated layers on artificial stones. All the other thick layers, such as the ones on granite or eggshell, were not precipitation. Those were simply the thickened sludge that had formed, which I then smeared onto the surface. Because when an artificial stone is dipped into the magical mixture, it somehow thickens the entire mixture. Even in the last experiment, when I thought the egg was responsible for thickening the magical mixture, there was actually a small piece of artificial stone sitting in the corner of the container. From there, suspicious brownish streams were spreading in every direction. In other words, the artificial stone was releasing something that caused the entire mixture to turn into a gel. So, that’s where we are right now. Feel free to experiment. As far as I know, apart from the half-dead waterglass, I haven’t found another method that works. And now, my flight is about to leave. ✈️

Marcell Fóti 🪨

21,092 görüntüleme • 9 gün önce

Apparently, I saw this video online and I decided to share. What this worker is applying is called bitumen, or what many of us know as bituminous coating. Most people think a wall is a solid, impenetrable block, but in reality, it is more like a sponge. Concrete and blocks have microscopic pores that pull water from the earth through a process we call capillary action. This thick black substance is the shield that stops that water from climbing up into the house. It is not about making the wall look good because this part will be buried under the dirt forever. It is about creating a skin that water cannot breathe through. When do you need to do this? The need for this arises because the soil is a very aggressive environment. Water is not your only enemy.. The ground also contains salts and sulfates that want to eat away at the cement. If this moisture finds its way to the steel bars inside the columns, those bars will start to rust. And when steel rusts, it expands, and that expansion is what cracks the concrete from the inside out. This coating is the only thing standing between your foundation and that kind of slow destruction. Thats is why if you see wet patches at the bottom of your walls inside your house, it usually means someone skipped this step or did it poorly during construction. You can apply this anytime you are building parts of a structure that will stay in contact with the ground. It is common in areas where the water table is high or where the soil stays damp for most of the year. This is a one-shot opportunity. Once you backfill the soil, you can never go back to fix it without a lot of expense and a lot of digging. It is about having the foresight to protect the heart of the building while it is still exposed. Please don’t ignore this if you need to. If you ignore it now to save a bit of money, you will be funding the future decay of your own home. I hope this helps.

Apparently, I saw this video online and I decided to share. What this worker is applying is called bitumen, or what many of us know as bituminous coating. Most people think a wall is a solid, impenetrable block, but in reality, it is more like a sponge. Concrete and blocks have microscopic pores that pull water from the earth through a process we call capillary action. This thick black substance is the shield that stops that water from climbing up into the house. It is not about making the wall look good because this part will be buried under the dirt forever. It is about creating a skin that water cannot breathe through. When do you need to do this? The need for this arises because the soil is a very aggressive environment. Water is not your only enemy.. The ground also contains salts and sulfates that want to eat away at the cement. If this moisture finds its way to the steel bars inside the columns, those bars will start to rust. And when steel rusts, it expands, and that expansion is what cracks the concrete from the inside out. This coating is the only thing standing between your foundation and that kind of slow destruction. Thats is why if you see wet patches at the bottom of your walls inside your house, it usually means someone skipped this step or did it poorly during construction. You can apply this anytime you are building parts of a structure that will stay in contact with the ground. It is common in areas where the water table is high or where the soil stays damp for most of the year. This is a one-shot opportunity. Once you backfill the soil, you can never go back to fix it without a lot of expense and a lot of digging. It is about having the foresight to protect the heart of the building while it is still exposed. Please don’t ignore this if you need to. If you ignore it now to save a bit of money, you will be funding the future decay of your own home. I hope this helps.

A.Y.O

75,399 görüntüleme • 5 ay önce

I was the first Korean in the world to take a ride in a Tesla Cybercab, and I’m incredibly proud of that. 🇰🇷 You can probably tell from these raw, unedited videos just how excited I was getting into it for the very first time. No steering wheel. No pedals. No driver. Just me getting into a Cybercab and trusting it to take me where I needed to go. Even now, it still feels surreal that this is actually live and operating in the real world. I’ve followed Tesla and believed in this future for 10+ years, so getting to experience it firsthand, being one of the select few to be invited to the launch event, and represent Korea while doing it… is something I’ll never forget. These are the raw moments from my very first ride. You can see it from my reactions… I was like a kid experiencing the future for the first time.

I was the first Korean in the world to take a ride in a Tesla Cybercab, and I’m incredibly proud of that. 🇰🇷 You can probably tell from these raw, unedited videos just how excited I was getting into it for the very first time. No steering wheel. No pedals. No driver. Just me getting into a Cybercab and trusting it to take me where I needed to go. Even now, it still feels surreal that this is actually live and operating in the real world. I’ve followed Tesla and believed in this future for 10+ years, so getting to experience it firsthand, being one of the select few to be invited to the launch event, and represent Korea while doing it… is something I’ll never forget. These are the raw moments from my very first ride. You can see it from my reactions… I was like a kid experiencing the future for the first time.

Teslaconomics

15,893 görüntüleme • 2 gün önce

Think you’ve got the diagnosis? Think again!! This is a case where the diagnosis is not as important as the lesson it teaches you. Watch the video and then check back for hidden portion of this post to see what the answer is... And what lesson you should have learned from it ! Avidly enhancing T2 dark lesions in the subependymal region with increased diffusion signal. If I said that description to you—even without seeing the images—you would say lymphoma! Was that your answer? It was mine! And we are both wrong! It turned out to be metastatic melanoma. But the lesson here is that just because you were wrong by pathology, doesn’t mean you were wrong on the imaging If I saw a case like this again, I would still say lymphoma! You won’t be right every time—there will be weird cases. But you are making a bet on the imaging appearance and you should always bet the odds—with the risk that every now and then you might be wrong! So don’t remember from this case that metastases can look like lymphoma—remember that sometimes it’s ok to be wrong as long as you read the case right

Think you’ve got the diagnosis? Think again!! This is a case where the diagnosis is not as important as the lesson it teaches you. Watch the video and then check back for hidden portion of this post to see what the answer is... And what lesson you should have learned from it ! Avidly enhancing T2 dark lesions in the subependymal region with increased diffusion signal. If I said that description to you—even without seeing the images—you would say lymphoma! Was that your answer? It was mine! And we are both wrong! It turned out to be metastatic melanoma. But the lesson here is that just because you were wrong by pathology, doesn’t mean you were wrong on the imaging If I saw a case like this again, I would still say lymphoma! You won’t be right every time—there will be weird cases. But you are making a bet on the imaging appearance and you should always bet the odds—with the risk that every now and then you might be wrong! So don’t remember from this case that metastases can look like lymphoma—remember that sometimes it’s ok to be wrong as long as you read the case right

Lea Alhilali, MD

12,351 görüntüleme • 2 yıl önce

When I first joined Rayadas I didnt know what it will mean for me as a player! I knew it would be a place I could compete for titles, but I never knew how the passion for this institution would change me as a player. Over the years I learned what it meant to put on this jersey! The people in this city and my team taught me. I feel exactly what the people feel! The love and passion is indescribable, and when you step onto that field you feel it. The people in the stadium make you feel it, and it’s honestly one of the best feelings in this world! That’s why we fight until the very end, because we have a responsibility to represent everything this institution stands for!🙏🏾 #creersiemprecreer

When I first joined Rayadas I didnt know what it will mean for me as a player! I knew it would be a place I could compete for titles, but I never knew how the passion for this institution would change me as a player. Over the years I learned what it meant to put on this jersey! The people in this city and my team taught me. I feel exactly what the people feel! The love and passion is indescribable, and when you step onto that field you feel it. The people in the stadium make you feel it, and it’s honestly one of the best feelings in this world! That’s why we fight until the very end, because we have a responsibility to represent everything this institution stands for!🙏🏾 #creersiemprecreer

Jermaine Seoposenwe

108,602 görüntüleme • 1 yıl önce

One more secret before the pharaoh’s curse erases my brain later today. This is my legacy for you to continue. Goodbye! Remember that year when I desperately tried to cast the ancient Egyptian “impossible ashtray” using countless tips and tricks and failed badly every single time? The problem back then? I was unable to come up with a mix that hardens without cracking using a few millimeters thickness only. I tried to pour the geopolymer mix onto a wax shape 🕯️ , a balloon 🎈, then onto the outer side of a bowl etc. But no matter how hard I tried, my “impossible ashtray” fell apart into coin sized pieces because of cracking. I have wasted gazillions of hours, and enormous amounts of metakaolin and waterglass just to learn how NOT to cast this object. But the impossible ashtray must be a casting, no matter what. Right? I admired ancient Chinese porcelain’s precision for a long time but it took me more than a year to connect the two. This is how slow my brain 🧠 is. Because who cares? There was certainly no connection between ancient China and Egypt, right? Except… History Investigation by Vee showed us that ancient Chinese people used the very same tools for jade works than Egyptians for… khm 🫣 Is that a connection or a coincidence? God knows. But even if it’s a coincidence, it was worth checking whether porcelain making techniques could have been anything to do with geopolymers. What makes porcelain different from everything else is that they pour the porcelain mix INSIDE a hard mold (made from gypsum), let it dry for 2-4 minutes and then pour the rest of the mixture out of the mold. So they are creating a few mm thin layer INSIDE, on the inner wall of the mold. And then, as the porcelain mix is shrinking (lightbulb moment!💡) while drying, it will release the mold and you end up with a precision mug or other object ready to go into the oven. Now have a good look at my very first, not cracked, beautiful geopolymer “precision vase” created using the porcelain method in a plastic container. Yes, it is red. I swear I’ll redo it with white metakaolin. Yes, it’s not an ashtray. Yes, it inherited its precision from a 21st century object. Yes, yes, yes. But! It’s a few millimeter thick cast stone in a shape of a bowl! A STONE!!!!! 🪨🪨🪨🪨 How cool is that? Do you think it’s still impossible to create the “impossible ashtray” via casting? Fun fact: the impossible ashtray is “carved” from “anortoistic gneiss” officially, which is a fancy made up word for WE DON’T KNOW.

One more secret before the pharaoh’s curse erases my brain later today. This is my legacy for you to continue. Goodbye! Remember that year when I desperately tried to cast the ancient Egyptian “impossible ashtray” using countless tips and tricks and failed badly every single time? The problem back then? I was unable to come up with a mix that hardens without cracking using a few millimeters thickness only. I tried to pour the geopolymer mix onto a wax shape 🕯️ , a balloon 🎈, then onto the outer side of a bowl etc. But no matter how hard I tried, my “impossible ashtray” fell apart into coin sized pieces because of cracking. I have wasted gazillions of hours, and enormous amounts of metakaolin and waterglass just to learn how NOT to cast this object. But the impossible ashtray must be a casting, no matter what. Right? I admired ancient Chinese porcelain’s precision for a long time but it took me more than a year to connect the two. This is how slow my brain 🧠 is. Because who cares? There was certainly no connection between ancient China and Egypt, right? Except… History Investigation by Vee showed us that ancient Chinese people used the very same tools for jade works than Egyptians for… khm 🫣 Is that a connection or a coincidence? God knows. But even if it’s a coincidence, it was worth checking whether porcelain making techniques could have been anything to do with geopolymers. What makes porcelain different from everything else is that they pour the porcelain mix INSIDE a hard mold (made from gypsum), let it dry for 2-4 minutes and then pour the rest of the mixture out of the mold. So they are creating a few mm thin layer INSIDE, on the inner wall of the mold. And then, as the porcelain mix is shrinking (lightbulb moment!💡) while drying, it will release the mold and you end up with a precision mug or other object ready to go into the oven. Now have a good look at my very first, not cracked, beautiful geopolymer “precision vase” created using the porcelain method in a plastic container. Yes, it is red. I swear I’ll redo it with white metakaolin. Yes, it’s not an ashtray. Yes, it inherited its precision from a 21st century object. Yes, yes, yes. But! It’s a few millimeter thick cast stone in a shape of a bowl! A STONE!!!!! 🪨🪨🪨🪨 How cool is that? Do you think it’s still impossible to create the “impossible ashtray” via casting? Fun fact: the impossible ashtray is “carved” from “anortoistic gneiss” officially, which is a fancy made up word for WE DON’T KNOW.

Marcell Fóti 🪨

21,798 görüntüleme • 1 yıl önce

“The number one thing that I feel separates me from a lot of people is that I absolutely love doing this. There is no just talking, it’s all doing the work. I put my heart and soul into it. I’m trying to be the best I can be and the best teammate,” T.J. Watt Let your passion lead.

“The number one thing that I feel separates me from a lot of people is that I absolutely love doing this. There is no just talking, it’s all doing the work. I put my heart and soul into it. I’m trying to be the best I can be and the best teammate,” T.J. Watt Let your passion lead.

The Winning Difference

29,976 görüntüleme • 1 yıl önce

Universities and High Schools have not moved rapidly enough to guide students to have skills for the next decade. THEY HAVE FAILED. It is a massive crisis that can be averted by understanding what AI and Robotics will bring about. Solutions are knowing how to use these tools and new industries that will rise. But this situation is also on ALL OF US. No “job” is safe from founder to entry level in most industries. You and I, by what we do, will be “replaced” ultimately. What to do? AI and Robotics are tools, the next decade is owned by those who know how to use them expertly, but this is also temporary. We have to understand that what we do for “work” will change giving ultimately a greater value to those that are: Creative Flexible Always learning Willing to be wrong Love being human Love being alive Know history Covet wisdom Knowing all tech has downsides Building strong family and friends Realize many institutions have failed The first four are required for you to be able to live through this period with your sanity intact. The rest will allow you to thrive. There are no true careers at this point anymore. There are advocation and vocations which will either earn you money or give life meaning. We will learn that we are not “what we do”, just like we knew for 99% of human existence. Let that sink in. — You and I are far, far ahead of knowing this and we can do two things: 1) Laugh at the “clueless” 2) Help people understand with grace Go to Reddit if you are 1, in fact don’t follow me because you will not like this next decade and what I post. You are 2 and thank you. Even if you and I have not solved this issue, we can help people understand what is ahead and with determination and creativity bound together to solve it locally. Or human family has done this millions of times. The evidence is: you are here. The Neo Luddite movement has not even begun and it will potentially rip apart society even more than all the fashionable moment in the recent past has. These Luddites will have a good point with the wrong answers cooked up by dying academics that cling to labels, “virtues” and victim hood. It will be readymade for some governments to enter in as “big daddy” to “help us”. You will not like what they do, but you will only know when it is too late. It will include YOU “volunteering” to “leave” by 60, to “help out” CanadaPod style. “Brian, I’m 24 what do I do?”. I hope to do much more here to help. But I do know this: 1) Learn a trade or vocation because it’s valuable. It may also be free to low cost if you do it right. 2) Learn everything you can about USING AI and TRAINING YOUR AI. Your expertise will be in the top 1% for a decade. But not forever. 3) Understand Bitcoin and how it will rise while other things sink. This is a short list for now. We will know more moving forward. When you see videos like this posted below, know one thing: Many of these folks had no real family of mental and physical support. Maybe no parent or one parent. Maybe only a broke system to prepare them for—nothing. This was not their doing. Now it is not your “job” to help them, it is your survival to help them if that is what you need. See some day after the dust settles these 20 year olds will be 40 year olds and running YOUR world. And at some point you may need them more than you think you do. You will need them, as they need you now. THIS IS WHAT PAST WISDOM KNEW. The elders of the past never found the need to piss on the youth and hope for the best. THE YOUTH ARE OUR BEST, let us all find ways to change it, even if every aspect of “the system” wants us to berate them into the ground.

Universities and High Schools have not moved rapidly enough to guide students to have skills for the next decade. THEY HAVE FAILED. It is a massive crisis that can be averted by understanding what AI and Robotics will bring about. Solutions are knowing how to use these tools and new industries that will rise. But this situation is also on ALL OF US. No “job” is safe from founder to entry level in most industries. You and I, by what we do, will be “replaced” ultimately. What to do? AI and Robotics are tools, the next decade is owned by those who know how to use them expertly, but this is also temporary. We have to understand that what we do for “work” will change giving ultimately a greater value to those that are: Creative Flexible Always learning Willing to be wrong Love being human Love being alive Know history Covet wisdom Knowing all tech has downsides Building strong family and friends Realize many institutions have failed The first four are required for you to be able to live through this period with your sanity intact. The rest will allow you to thrive. There are no true careers at this point anymore. There are advocation and vocations which will either earn you money or give life meaning. We will learn that we are not “what we do”, just like we knew for 99% of human existence. Let that sink in. — You and I are far, far ahead of knowing this and we can do two things: 1) Laugh at the “clueless” 2) Help people understand with grace Go to Reddit if you are 1, in fact don’t follow me because you will not like this next decade and what I post. You are 2 and thank you. Even if you and I have not solved this issue, we can help people understand what is ahead and with determination and creativity bound together to solve it locally. Or human family has done this millions of times. The evidence is: you are here. The Neo Luddite movement has not even begun and it will potentially rip apart society even more than all the fashionable moment in the recent past has. These Luddites will have a good point with the wrong answers cooked up by dying academics that cling to labels, “virtues” and victim hood. It will be readymade for some governments to enter in as “big daddy” to “help us”. You will not like what they do, but you will only know when it is too late. It will include YOU “volunteering” to “leave” by 60, to “help out” CanadaPod style. “Brian, I’m 24 what do I do?”. I hope to do much more here to help. But I do know this: 1) Learn a trade or vocation because it’s valuable. It may also be free to low cost if you do it right. 2) Learn everything you can about USING AI and TRAINING YOUR AI. Your expertise will be in the top 1% for a decade. But not forever. 3) Understand Bitcoin and how it will rise while other things sink. This is a short list for now. We will know more moving forward. When you see videos like this posted below, know one thing: Many of these folks had no real family of mental and physical support. Maybe no parent or one parent. Maybe only a broke system to prepare them for—nothing. This was not their doing. Now it is not your “job” to help them, it is your survival to help them if that is what you need. See some day after the dust settles these 20 year olds will be 40 year olds and running YOUR world. And at some point you may need them more than you think you do. You will need them, as they need you now. THIS IS WHAT PAST WISDOM KNEW. The elders of the past never found the need to piss on the youth and hope for the best. THE YOUTH ARE OUR BEST, let us all find ways to change it, even if every aspect of “the system” wants us to berate them into the ground.

Brian Roemmele

37,681 görüntüleme • 1 yıl önce

I am real I have been through what you are facing and survived I spend all my time trying to explain what I have learned and there is zero money or energy to fix up my garage I live in so don’t waste your time telling me to clean it up I do this willingly so that you won’t have to That is the only reason I am running for the senate I don’t seek fame nor fortune but I realize we need someone in the Senate who will put Texans first and demand the same for Americans It’s as real as it gets in this war on American workers

I am real I have been through what you are facing and survived I spend all my time trying to explain what I have learned and there is zero money or energy to fix up my garage I live in so don’t waste your time telling me to clean it up I do this willingly so that you won’t have to That is the only reason I am running for the senate I don’t seek fame nor fortune but I realize we need someone in the Senate who will put Texans first and demand the same for Americans It’s as real as it gets in this war on American workers

Grumpy Ole Veteran

18,298 görüntüleme • 7 ay önce

Aidan O'Connell gets sacked on his final play last night and in my opinion the sack is on the #Raiders QB just as much as it is on LT Andrus Peat. AOC has a 3 step drop which means the play is designed for him to get the ball out quick. If you don't get the ball out then a QB is going to need to Create something. But what you don't want him to do is back pedal into a sack. Peat does lose the rep, but he does a good job recovering and pushing the DE up the field. I think AOC's ability to feel pressure, get away from it, and throw on the run were some things I saw from him last year where he struggled with. So I do hope next week he shows a little bit more in that. Overall the play didn't work because Luke Getsy designed a really poor play where the spacing is off, I will talk about this more on my Youtube channel later today but you can clearly see that Bowers was supposed to be a natural pick for Tre Tucker at the bottom of the screen. But the spacing didn't work and the WR and TE run into each other.

Aidan O'Connell gets sacked on his final play last night and in my opinion the sack is on the #Raiders QB just as much as it is on LT Andrus Peat. AOC has a 3 step drop which means the play is designed for him to get the ball out quick. If you don't get the ball out then a QB is going to need to Create something. But what you don't want him to do is back pedal into a sack. Peat does lose the rep, but he does a good job recovering and pushing the DE up the field. I think AOC's ability to feel pressure, get away from it, and throw on the run were some things I saw from him last year where he struggled with. So I do hope next week he shows a little bit more in that. Overall the play didn't work because Luke Getsy designed a really poor play where the spacing is off, I will talk about this more on my Youtube channel later today but you can clearly see that Bowers was supposed to be a natural pick for Tre Tucker at the bottom of the screen. But the spacing didn't work and the WR and TE run into each other.

Sanjit T.

68,301 görüntüleme • 2 yıl önce

A friend of mine just recently got his first gun, a striker fired Glock 19. He is terrified to leave a round chambered. To anyone reading this who has this same fear, I want to alleviate your concerns. I'm going to explain why there is nothing to be afraid of. First and foremost, I fully understand your concern. It's not irrational. And you're not stupid for being nervous about a bullet being aimed at your leg with the striker cocked back under spring tension about an 1/8 of an inch from the primer. I get it. I shared this concern when I was new to carrying. But your fear is due to a lack of understanding of the internal safety features of a modern striker fired handgun. On a properly maintained modern striker fired pistol the striker CANNOT hit the primer on the chambered round without the trigger being pulled. Can't. Not shouldn't. Can't. (If you have any good Sig P320 jokes, this is the proper place to share them) There is a block that the striker will hit and stop if it is released without the trigger being depressed. It works just like a lock and key. There is a channel in the blocker that the striker can pass through if it is in the fire position. It only goes into the fire position if the trigger is pulled which pushes the blocker into the fire position. A spring keeps the blocker firmly in the block position until then. The blocker is a solid piece of steel that won't break. And if your gun is securely in a hard sided Kydex holster nothing can move the trigger unless it is unholstered. Many guns like Glocks have a trigger safety that prevents the trigger from moving due to force of dropping. Your finger has to be on the trigger safety to move it. So the gun cannot fire unless you pull the trigger. And it's easy for you to test this safety feature to see how it works! See the video below. You can try to push the striker forward by moving that piece at the back of the slide forward. That piece is the back of the striker. Push it forward and it will stop. The tip won't come out through the breach. You see it trying to come through but it gets stuck. Now push that little button in. That is the actual blocker. When you push it in you will now be able to move the striker forward through the breach and see how it will strike the primer. You can test this easily every time you disassemble your pistol to verify it is still working. You can break this safety feature by removing the blocker or losing the spring. But if it's there it will work. (You would be the first person in firearms history who has ever lost a spring. Literally the first one. It has never happened before. 😐) But it doesn't come out as part of regular maintenance. You have to disassemble the firing assembly to get it out. That won't happen by accident. And if you do that on purpose you should do this blocker test when you reassemble it to make sure the safety feature is working. My video shows a Glock slide. All Glocks will look like this. Other brands may put the blocker in a different spot or it may be a slightly different shape. But they all (mostly) have the same design. If you test yours as demonstrated and it works like mine does, your gun WILL NOT fire without pulling the trigger. (If you just thought of another P320 joke, this is another good place to toss that out there)

A friend of mine just recently got his first gun, a striker fired Glock 19. He is terrified to leave a round chambered. To anyone reading this who has this same fear, I want to alleviate your concerns. I'm going to explain why there is nothing to be afraid of. First and foremost, I fully understand your concern. It's not irrational. And you're not stupid for being nervous about a bullet being aimed at your leg with the striker cocked back under spring tension about an 1/8 of an inch from the primer. I get it. I shared this concern when I was new to carrying. But your fear is due to a lack of understanding of the internal safety features of a modern striker fired handgun. On a properly maintained modern striker fired pistol the striker CANNOT hit the primer on the chambered round without the trigger being pulled. Can't. Not shouldn't. Can't. (If you have any good Sig P320 jokes, this is the proper place to share them) There is a block that the striker will hit and stop if it is released without the trigger being depressed. It works just like a lock and key. There is a channel in the blocker that the striker can pass through if it is in the fire position. It only goes into the fire position if the trigger is pulled which pushes the blocker into the fire position. A spring keeps the blocker firmly in the block position until then. The blocker is a solid piece of steel that won't break. And if your gun is securely in a hard sided Kydex holster nothing can move the trigger unless it is unholstered. Many guns like Glocks have a trigger safety that prevents the trigger from moving due to force of dropping. Your finger has to be on the trigger safety to move it. So the gun cannot fire unless you pull the trigger. And it's easy for you to test this safety feature to see how it works! See the video below. You can try to push the striker forward by moving that piece at the back of the slide forward. That piece is the back of the striker. Push it forward and it will stop. The tip won't come out through the breach. You see it trying to come through but it gets stuck. Now push that little button in. That is the actual blocker. When you push it in you will now be able to move the striker forward through the breach and see how it will strike the primer. You can test this easily every time you disassemble your pistol to verify it is still working. You can break this safety feature by removing the blocker or losing the spring. But if it's there it will work. (You would be the first person in firearms history who has ever lost a spring. Literally the first one. It has never happened before. 😐) But it doesn't come out as part of regular maintenance. You have to disassemble the firing assembly to get it out. That won't happen by accident. And if you do that on purpose you should do this blocker test when you reassemble it to make sure the safety feature is working. My video shows a Glock slide. All Glocks will look like this. Other brands may put the blocker in a different spot or it may be a slightly different shape. But they all (mostly) have the same design. If you test yours as demonstrated and it works like mine does, your gun WILL NOT fire without pulling the trigger. (If you just thought of another P320 joke, this is another good place to toss that out there)

Spaceballs The X Account

197,088 görüntüleme • 1 ay önce