Loading video...

Video Failed to Load

There was a problem loading this video. This could be due to a temporary network issue or the video might be unavailable.

I just built a Meta Ads diagnostic in Claude Code that tells you WHY your account broke, not just what changed 🤯 It spins up a team of agents that each investigate a different reason performance dropped, then argue against each other to kill the wrong answer before it... ever reaches you. All inside Claude Code. Perfect for DTC brands and agencies who panic-kill creative the second CPA spikes. If you've watched ROAS fall off a cliff and opened Ads Manager with ten tabs going, you already know what happens next. Your gut says "creative fatigue." You kill your best-performing ad. A week later performance is still broken, because that was never the problem. Guessing wrong is the most expensive move in paid social. This workflow ends the guessing: → One agent investigates each competing theory — creative fatigue, budget and delivery changes, traffic quality, offer and seasonality → Each one is blind to the others, reasoning only from its own slice of the data so they can't bias each other → A refuter agent then attacks every surviving theory and tries to kill it → A theory only stands if the data can't disprove it → You get a ranked diagnosis: the real cause, the evidence for and against it, and the one move to make this week No anchoring on the first obvious answer. No killing winning creative on a hunch. No "here's what happened" reports that never tell you why. What you get: → Every theory tested in parallel instead of one biased guess → An adversarial pass that kills the wrong answer before you act on it → A ranked diagnosis with confidence levels and evidence both ways → A reusable workflow you drop next month's export into and re-run Built 100% in Claude Code with the new dynamic workflows. The first account I ran it on looked like textbook creative fatigue. The workflow disagreed, and traced the real cause to a budget change that had doubled spend and flooded delivery with junk traffic. I put together a full playbook with the exact workflow, the prompt, and how to run it on your own account. Want it for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)show more

Mike Futia

77,972 subscribers

12,729 views • 1 month ago •via X (Twitter)

Anya Rossi• Live Now

Private livecam show

0 Comments

No comments available

Comments from the original post will appear here

Related Videos

I just built a Claude skill that audits your entire Meta Ads account in under 5 minutes 🤯 Export your CSV from Ads Manager → drop it into Claude → get back an account health score, a wasted spend breakdown, and a prioritized fix list telling you exactly what to change this week. All inside Claude Cowork. Perfect for DTC brands and agencies who are running Meta Ads but have no idea which creatives are bleeding budget, which audiences stopped converting, or why CPA crept up 40% last month. If your weekly Meta workflow still looks like this — open Ads Manager, stare at the dashboard, sort by spend, squint at CTR columns, export a CSV you never actually analyze, close the tab and hope for the best... This skill runs the full audit for you: → Reads your Meta Ads CSV export (campaign, ad set, and ad-level data) → Scores your account 0-100 across 6 dimensions: creative health, audience efficiency, budget allocation, funnel performance, fatigue signals, and offer effectiveness → Calculates your exact wasted spend in dollars: every ad with spend and zero purchases → Identifies creative fatigue before it tanks your CPA (declining CTR + rising frequency + increasing cost) → Flags audience overlap and saturation across ad sets → Delivers a top-5 fix list ranked by how much money each fix saves you No API connection. No third-party tool access to your ad account. No risk of Meta flagging your account. What you get: →A full account health score (0-100) with a grade for each dimension →Your exact wasted spend in dollars (not a vague "you're overspending") →Creative fatigue signals with specific ads to kill or refresh this week →Audience efficiency analysis showing which ad sets are cannibalizing each other →A prioritized fix list ranked by budget impact (do #1 first, save the most money) One CSV export, one prompt. Five minutes. I put together the full playbook with the skill file, the scoring methodology, and the exact CSV export steps from Ads Manager. Want it for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)

I just built a Claude skill that audits your entire Meta Ads account in under 5 minutes 🤯 Export your CSV from Ads Manager → drop it into Claude → get back an account health score, a wasted spend breakdown, and a prioritized fix list telling you exactly what to change this week. All inside Claude Cowork. Perfect for DTC brands and agencies who are running Meta Ads but have no idea which creatives are bleeding budget, which audiences stopped converting, or why CPA crept up 40% last month. If your weekly Meta workflow still looks like this — open Ads Manager, stare at the dashboard, sort by spend, squint at CTR columns, export a CSV you never actually analyze, close the tab and hope for the best... This skill runs the full audit for you: → Reads your Meta Ads CSV export (campaign, ad set, and ad-level data) → Scores your account 0-100 across 6 dimensions: creative health, audience efficiency, budget allocation, funnel performance, fatigue signals, and offer effectiveness → Calculates your exact wasted spend in dollars: every ad with spend and zero purchases → Identifies creative fatigue before it tanks your CPA (declining CTR + rising frequency + increasing cost) → Flags audience overlap and saturation across ad sets → Delivers a top-5 fix list ranked by how much money each fix saves you No API connection. No third-party tool access to your ad account. No risk of Meta flagging your account. What you get: →A full account health score (0-100) with a grade for each dimension →Your exact wasted spend in dollars (not a vague "you're overspending") →Creative fatigue signals with specific ads to kill or refresh this week →Audience efficiency analysis showing which ad sets are cannibalizing each other →A prioritized fix list ranked by budget impact (do #1 first, save the most money) One CSV export, one prompt. Five minutes. I put together the full playbook with the skill file, the scoring methodology, and the exact CSV export steps from Ads Manager. Want it for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)

Mike Futia

35,908 views • 3 months ago

Claude Cowork is f*cking cracked for Meta Ads 🤯 Point it at a folder with your ad export, your brand context, and your brief template —> ... and it analyzes your account like a senior creative strategist + saves a finished brief directly to your computer. All inside Claude Cowork. Perfect for DTC brands and agencies who are still manually digging through ad reports trying to figure out why performance shifted. If you're running Meta Ads and pulling weekly reports that tell you what happened but not why — CPAs creeping up, CTRs dropping... You're killing creatives on gut feel because mapping performance back to hook type, angle, and offer framing takes hours you don't have. Claude Cowork eliminates the entire loop: → Drop your Meta Ads CSV export into a project folder → Add a brand context file and your brief template → Claude reads all three files and audits across 4 lenses: hook performance, offer angles, fatigue signals, next test recommendations → Asks clarifying questions if it needs them → Saves a finished creative brief as a real .md file directly to your folder No copy-pasting data into chat windows. No manually tagging creatives in a spreadsheet. No "here are your metrics" summaries that tell you nothing new. What you get: → Pattern analysis across every creative — which hook structures are converting and why → Creative fatigue signals before CPAs blow up → Competitor intelligence layered in from the Meta Ad Library → A data-backed brief your creative team can execute immediately Set it up once, drop in a fresh CSV every week and run the same prompt. I put together a full playbook with the exact folder setup, the prompts, and the brief template to get this running in under 30 minutes. Want it for free? > Like this post > Comment "ADS" And I'll send it over (must be following so I can DM)

Mike Futia

85,465 views • 4 months ago

I just built a Meta ad policy checker in Claude Code that catches rejections BEFORE Meta does 🤯 Drop in your ad copy → it pulls Meta's LIVE Advertising Standards, checks every line against the actual policy text, and hands each ad a verdict: Cleared for launch, Fix before launch, or Grounded. All inside Claude Code. Perfect for media buyers and DTC brands who've had ads bounced — or an account restricted — and never got a straight answer why. If you're finding out about policy problems only after the rejection email, resubmitting the same ad and praying, losing days of delivery while the appeal sits in review, and every bounce quietly teaches Meta to trust your account a little less... This runs the review before Meta ever sees the ad: → Drop in your ad copy (one ad or a whole batch) → It reads each ad and figures out which of Meta's policies apply → Scrapes the live policy pages from Meta's Transparency Center → Flags the exact phrase that violates, with Meta's own policy quoted next to it → Rewrites the risky lines so the message survives but the violation doesn't → Renders a dashboard: every ad, every finding, every fix in one place No guessing which word killed the ad. No resubmit-and-pray loops. No stacking rejections on your account history. What you get: → A verdict on every ad before you spend a dollar → The violating phrase + the policy citation, side by side → Rewrites that keep the selling intent → A report you can hand straight to your team or client Built 100% in Claude Code. No API keys, no Meta login. I'm giving away the complete Claude skill file. Want the skill for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)

I just built a Meta ad policy checker in Claude Code that catches rejections BEFORE Meta does 🤯 Drop in your ad copy → it pulls Meta's LIVE Advertising Standards, checks every line against the actual policy text, and hands each ad a verdict: Cleared for launch, Fix before launch, or Grounded. All inside Claude Code. Perfect for media buyers and DTC brands who've had ads bounced — or an account restricted — and never got a straight answer why. If you're finding out about policy problems only after the rejection email, resubmitting the same ad and praying, losing days of delivery while the appeal sits in review, and every bounce quietly teaches Meta to trust your account a little less... This runs the review before Meta ever sees the ad: → Drop in your ad copy (one ad or a whole batch) → It reads each ad and figures out which of Meta's policies apply → Scrapes the live policy pages from Meta's Transparency Center → Flags the exact phrase that violates, with Meta's own policy quoted next to it → Rewrites the risky lines so the message survives but the violation doesn't → Renders a dashboard: every ad, every finding, every fix in one place No guessing which word killed the ad. No resubmit-and-pray loops. No stacking rejections on your account history. What you get: → A verdict on every ad before you spend a dollar → The violating phrase + the policy citation, side by side → Rewrites that keep the selling intent → A report you can hand straight to your team or client Built 100% in Claude Code. No API keys, no Meta login. I'm giving away the complete Claude skill file. Want the skill for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)

Mike Futia

17,099 views • 17 days ago

Claude Code + Meta Ads CLI is f*cking wild 🤯 I just replaced 80% of my Meta Ads reporting workflow inside Claude Code. All without logging into Ads Manager. Perfect for DTC brands and creative agencies who are sick of logging into Ads Manager, exporting CSVs, and rebuilding the same dashboards every Monday. This setup eliminates the entire loop: → Plug Meta's official Ads CLI into Claude Code → Type one sentence describing the report you want → Claude pulls the data, builds the artifact, and saves it to your folder → HTML dashboards, comparison tables, written briefs → Run it weekly, monthly, anytime a client asks for something custom No CSV exports. No Looker setup. No copy-pasting numbers into decks. What you get: → A live dashboard with KPI cards, top 10 ad set ranking, daily spend chart, and sortable table — built in 90 seconds → Week-over-week comparison reports with CTR drops and CPC spikes flagged automatically → Creative fatigue audits that flag dying ads before CPAs blow up → One-page executive briefs with winners, losers, action items, and recommendations → Anomaly reports that surface every metric deviation over 25% Built 100% in Claude Code with the official Meta CLI. No third-party connector means no ban risk. I put together the complete playbook with the 15-minute setup and a step-by-step Loom video showing you the full install. Want it for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)

Claude Code + Meta Ads CLI is f*cking wild 🤯 I just replaced 80% of my Meta Ads reporting workflow inside Claude Code. All without logging into Ads Manager. Perfect for DTC brands and creative agencies who are sick of logging into Ads Manager, exporting CSVs, and rebuilding the same dashboards every Monday. This setup eliminates the entire loop: → Plug Meta's official Ads CLI into Claude Code → Type one sentence describing the report you want → Claude pulls the data, builds the artifact, and saves it to your folder → HTML dashboards, comparison tables, written briefs → Run it weekly, monthly, anytime a client asks for something custom No CSV exports. No Looker setup. No copy-pasting numbers into decks. What you get: → A live dashboard with KPI cards, top 10 ad set ranking, daily spend chart, and sortable table — built in 90 seconds → Week-over-week comparison reports with CTR drops and CPC spikes flagged automatically → Creative fatigue audits that flag dying ads before CPAs blow up → One-page executive briefs with winners, losers, action items, and recommendations → Anomaly reports that surface every metric deviation over 25% Built 100% in Claude Code with the official Meta CLI. No third-party connector means no ban risk. I put together the complete playbook with the 15-minute setup and a step-by-step Loom video showing you the full install. Want it for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)

Mike Futia

23,615 views • 2 months ago

Claude Code + Google Stitch 2.0 is f*cking cracked 🤯 Google just dropped a free AI design agent that solves Claude Code's biggest weakness: frontend design. One screenshot of a high-converting landing page → a production-ready site for your brand in minutes. All inside Google Stitch + Claude Code. Perfect for DTC brands and agencies who are building advertorial pages and product launch pages for Meta but burning days on designer back-and-forth. If you're running Meta ads and need 5-10 different landing pages testing different hooks, angles, and offers — each one targeting a different audience and pain point — you know the bottleneck isn't the ads. It's the pages. Briefing designers, waiting for revisions, paying $2-5K per page. Stitch eliminates the design bottleneck: → Find a high-converting advertorial that's scaling on Meta → Screenshot it and drop it into Stitch (powered by Gemini 3.1) → Stitch redesigns it with your brand's colors, fonts, and imagery using Nano Banana 2 → Edit sections visually — headlines, CTAs, layouts — without touching code → Export the code and paste it into Claude Code → Claude builds the full production site and deploys to Vercel or Netlify in 60 seconds No designer. No $3K per landing page. No Claude Code frontend that looks like a template from 2019. What you get: → Designer-quality landing pages and advertorials built in minutes, not weeks → Visual editing so you actually see the design before you code it → Nano Banana 2 generating on-brand product imagery and hero shots → A repeatable system — new angle, new page, same pipeline Built 100% with Google Stitch 2.0 + Claude Code. I put together a full playbook showing the exact workflow: how to find winning pages, redesign them in Stitch, and deploy with Claude Code. Want it for free? > Like this post > Comment "STITCH" And I'll send it over (must be following so I can DM)

Mike Futia

125,786 views • 4 months ago

Meta just shipped the official Ads CLI 🤯 The first time you can plug Claude Code directly into your Meta ad account without a third-party connector or (allegedly) getting your account banned. Plug it into Claude Code and Claude can pull live performance data, build dashboards, and analyze creative fatigue, all from one prompt. Here's what's possible inside Claude Code: → Pull last 30 days of campaign performance into a styled HTML dashboard → Find every ad with frequency over 3.0 or CTR drops over 20% week-over-week → Generate weekly client reports written in your brand voice → Run anomaly detection on spend, CPM, and conversions → Build creative fatigue alerts that flag dying ads before CPAs blow up The biggest difference from every third-party Meta MCP that's been floating around: This one is built and maintained by Meta themselves. Most folks running Meta ads won't touch third-party connectors because the ban risk is real. The official CLI (mostly) eliminates that. It's your token, your app, your direct connection to Meta's API. I put together the complete playbook: → The exact 15-minute setup: Meta Developer App, system user, asset assignment, token generation → 20+ prompt templates for reporting, fatigue detection, opportunity scoring, and anomaly analysis → A weekly operating cadence: Monday performance pull, Wednesday creative review, Friday exec brief → Rate limit guardrails so you don't trip Meta's automated enforcement → The 5 prompts to run first Want it for free? > Like this post > Comment "META" And I'll send it over (must be following so I can DM)

Mike Futia

35,473 views • 3 months ago

I just built a Claude skill that audits your entire Google Ads account in under 5 minutes 🤯 One prompt → a full account score, wasted spend breakdown, and a prioritized fix list telling you exactly what to change this week. All inside Claude Cowork. Perfect for DTC brands and agencies who are running Google Ads but have no idea how much budget is leaking. If you're managing Google Ads and your "optimization" process is logging in, staring at the dashboard, sorting by cost, and hoping you spot the problem before it costs you another $500... This audit skill finds it for you: → Connects to your live Google Ads data via MCP → Scores your account across 6 dimensions: wasted spend, search term quality, keyword health, quality scores, budget allocation, and creative performance → Calculates your exact wasted spend in dollars — search terms burning budget with zero conversions → Flags quality score issues dragging up your CPCs → Identifies keyword cannibalization across campaigns → Surfaces your top 5 highest-priority fixes ranked by budget impact → Generates a clean audit report you can hand to a client or share with your team No CSV exports. No pivot tables. No guessing where the money went. What you get: → A single Claude skill file you install once → An account health score (0-100) every time you run it → Exact dollar amount of wasted spend identified → Prioritized action list — not "optimize your account," but "pause these 12 search terms and save $847/month" → Works with any Google Ads account connected I'm giving away the full audit skill — the actual .md file you drop into Claude and run against your own account. Want it? Like this post Comment "SKILL" And I'll send it over (must be following so I can DM)

I just built a Claude skill that audits your entire Google Ads account in under 5 minutes 🤯 One prompt → a full account score, wasted spend breakdown, and a prioritized fix list telling you exactly what to change this week. All inside Claude Cowork. Perfect for DTC brands and agencies who are running Google Ads but have no idea how much budget is leaking. If you're managing Google Ads and your "optimization" process is logging in, staring at the dashboard, sorting by cost, and hoping you spot the problem before it costs you another $500... This audit skill finds it for you: → Connects to your live Google Ads data via MCP → Scores your account across 6 dimensions: wasted spend, search term quality, keyword health, quality scores, budget allocation, and creative performance → Calculates your exact wasted spend in dollars — search terms burning budget with zero conversions → Flags quality score issues dragging up your CPCs → Identifies keyword cannibalization across campaigns → Surfaces your top 5 highest-priority fixes ranked by budget impact → Generates a clean audit report you can hand to a client or share with your team No CSV exports. No pivot tables. No guessing where the money went. What you get: → A single Claude skill file you install once → An account health score (0-100) every time you run it → Exact dollar amount of wasted spend identified → Prioritized action list — not "optimize your account," but "pause these 12 search terms and save $847/month" → Works with any Google Ads account connected I'm giving away the full audit skill — the actual .md file you drop into Claude and run against your own account. Want it? Like this post Comment "SKILL" And I'll send it over (must be following so I can DM)

Mike Futia

59,911 views • 4 months ago

Claude Cowork + Meta Ads is absolutely wild 🤯 I built an AI creative system that does what most ad teams can't. Every AI model I tested fell flat on ad creative. Generic hooks, surface-level angles, zero understanding of what actually converts on Meta. Then I got inside Claude Cowork. 12 hours later I had a full system dialed in for paid social creative. Here's what it does: → Analyzes your best ads and tells you exactly why they're winning → Generates fresh angles segmented by buyer awareness level → Writes first lines engineered to stop the scroll on Meta → Builds execution-ready briefs your creative team can run with immediately → Flags when your current ads are going stale and suggests pivots All inside one Claude Cowork workspace. No plugins. No extra tools. Here's who this is for: Brands spending $50K-$500K/month on Meta who are stuck in the same cycle: -> Your creative team keeps testing random ideas -> Your winners eventually die and the replacement process is slow -> Nobody can produce volume fast enough to keep up with the algorithm This system turns a week of creative strategy into a single afternoon. I packaged the whole thing into 50 ready-to-use prompts across 5 categories: -> Winning Ad Analysis -> Angle Generation -> Scroll-Stop Hooks -> Creative Brief Builder -> Ad Refresh & Fatigue Prevention Copy, paste, run. Want access for free? > Like this post > Comment "COWORK" And I'll send it over (must be following so I can DM)

Claude Cowork + Meta Ads is absolutely wild 🤯 I built an AI creative system that does what most ad teams can't. Every AI model I tested fell flat on ad creative. Generic hooks, surface-level angles, zero understanding of what actually converts on Meta. Then I got inside Claude Cowork. 12 hours later I had a full system dialed in for paid social creative. Here's what it does: → Analyzes your best ads and tells you exactly why they're winning → Generates fresh angles segmented by buyer awareness level → Writes first lines engineered to stop the scroll on Meta → Builds execution-ready briefs your creative team can run with immediately → Flags when your current ads are going stale and suggests pivots All inside one Claude Cowork workspace. No plugins. No extra tools. Here's who this is for: Brands spending $50K-$500K/month on Meta who are stuck in the same cycle: -> Your creative team keeps testing random ideas -> Your winners eventually die and the replacement process is slow -> Nobody can produce volume fast enough to keep up with the algorithm This system turns a week of creative strategy into a single afternoon. I packaged the whole thing into 50 ready-to-use prompts across 5 categories: -> Winning Ad Analysis -> Angle Generation -> Scroll-Stop Hooks -> Creative Brief Builder -> Ad Refresh & Fatigue Prevention Copy, paste, run. Want access for free? > Like this post > Comment "COWORK" And I'll send it over (must be following so I can DM)

Mike Futia

85,563 views • 5 months ago

Claude Code Agent Teams are f*cking ridiculous 🤯 One prompt → a team lead breaks your project into pieces, spins up multiple AI agents, and they all work on different parts simultaneously. Research, builds, reviews, and debugging: all happening at the same time. All inside Claude Code. If you're running complex projects where every step waits on the last one... Agent teams eliminate the entire bottleneck: → Tell Claude what you need and describe the team structure in plain English → A lead agent breaks the work into a shared task list → It spawns 3-5 teammates — each with their own context and workspace → Teammates research, build, test, and review in parallel → They message each other, share findings, and challenge each other's work → The lead synthesizes everything into a finished deliverable No managing agents yourself. No waiting for step 1 to finish before step 2 starts. No single-lens reviews that miss half the issues. What you get: → Competitive research across 5 brands done in minutes instead of hours → Multi-component builds where frontend, backend, and data layers happen simultaneously → Creative reviews from 3 different angles at once — brand voice, conversion, differentiation → Funnel debugging where 4 agents investigate 4 theories and debate until they find the real answer Built 100% in Claude Code with one settings change. I put together a full DTC playbook: 5 workflows with copy-paste prompts, the exact setup process, token management tips, and honest guidance on when agent teams are worth it vs. when a simpler approach is the better move. Want it for free? > Like this post > Comment "AGENTS" And I'll send it over (must be following so I can DM)

Mike Futia

46,409 views • 5 months ago

Beauty ads just changed forever. Free Claude Opus 4.8 + GPT Image 2 + Seedance 2.0 workflow to spin up 100s of video ads. No studio, no model, no macro lens, no shoot day. Here's what nobody in beauty marketing wants to say out loud. That glossy lip shot. The droplet hitting the surface in slow motion. The whip-pan into the next scene. The crystalline product splash. All the stuff that used to need a real set, a real camera op, and a full shoot day. You can generate every frame of it from a text prompt now, and stitch it into a finished ad before your coffee goes cold. The workflow is almost stupidly simple: → Tell Claude Opus 4.8 the beauty shot you want (dewy skin macro, gloss-on-lips contact, ripple transition, the works) → Claude turns it into a shot-by-shot storyboard plus a prompt for every frame → GPT Image 2 generates the photoreal stills, frame by frame → Seedance 2.0 animates each one into a clip with that buttery slow-mo glide → You drop the clips into HeyOz and assemble the full ad in one place The real unlock is volume. This isn't one hero video. Once the workflow is dialed, you spin up hundreds of variations. Different shades, different models, different hooks, different transitions. The exact creative volume Meta rewards, minus the production cost that used to make it impossible. Old way: one shoot, one look, $10k+, weeks of waiting. New way: a hundred angles, any look, a few dollars each, same afternoon. I wrote up the entire workflow. The Claude storyboard prompt, the GPT Image 2 frame prompts, the Seedance motion settings, the full assembly flow. Completely free, no email gate. Want it? Comment "GLOSS" and I'll send it straight over. (make sure you're following so it can actually reach you)

Beauty ads just changed forever. Free Claude Opus 4.8 + GPT Image 2 + Seedance 2.0 workflow to spin up 100s of video ads. No studio, no model, no macro lens, no shoot day. Here's what nobody in beauty marketing wants to say out loud. That glossy lip shot. The droplet hitting the surface in slow motion. The whip-pan into the next scene. The crystalline product splash. All the stuff that used to need a real set, a real camera op, and a full shoot day. You can generate every frame of it from a text prompt now, and stitch it into a finished ad before your coffee goes cold. The workflow is almost stupidly simple: → Tell Claude Opus 4.8 the beauty shot you want (dewy skin macro, gloss-on-lips contact, ripple transition, the works) → Claude turns it into a shot-by-shot storyboard plus a prompt for every frame → GPT Image 2 generates the photoreal stills, frame by frame → Seedance 2.0 animates each one into a clip with that buttery slow-mo glide → You drop the clips into HeyOz and assemble the full ad in one place The real unlock is volume. This isn't one hero video. Once the workflow is dialed, you spin up hundreds of variations. Different shades, different models, different hooks, different transitions. The exact creative volume Meta rewards, minus the production cost that used to make it impossible. Old way: one shoot, one look, $10k+, weeks of waiting. New way: a hundred angles, any look, a few dollars each, same afternoon. I wrote up the entire workflow. The Claude storyboard prompt, the GPT Image 2 frame prompts, the Seedance motion settings, the full assembly flow. Completely free, no email gate. Want it? Comment "GLOSS" and I'll send it straight over. (make sure you're following so it can actually reach you)

Ahad Shams

11,067 views • 1 month ago

I just built a Claude Cowork skill that turns your Google Ads data into a visual performance dashboard in 60 seconds 🤯 One prompt → campaign breakdowns, CPA trends, spend vs conversions charts, and hourly conversion patterns, all rendered as an interactive HTML dashboard you open in Chrome. All inside Claude Cowork. Perfect for DTC brands and agencies who are pulling Google Ads data into spreadsheets every week, manually building charts, and spending an hour formatting a report that's outdated by the time you send it. If you're managing Google Ads and your weekly reporting workflow looks like this — export a CSV, open Google Sheets, build a pivot table, copy the numbers into a slide deck, manually create charts, format everything, realize you forgot a campaign, start over ... This skill does the whole thing in one prompt: → Connects to your live Google Ads data via MCP → Pulls spend, conversions, CPA, ROAS, CTR across every campaign → Builds an interactive HTML dashboard → Summary cards at the top: total spend, total conversions, avg CPA, avg ROAS → Bar chart comparing spend vs conversions by campaign → CPA trend line over the last 30 days → Campaign table ranked by performance, color-coded green/yellow/red → Opens in Chrome: hover over charts, compare campaigns, screenshot for your team No spreadsheets. No manual chart building. No hour-long formatting sessions. What you get: → A visual dashboard from live data in under 60 seconds → Campaign performance you can actually see, not just read in a table → CPA trends that show you where things are heading, not just where they are → A dashboard you can screenshot and drop into Slack, a client report, or a team standup → Reusable — run it weekly and the data updates automatically One prompt. Live data. A finished dashboard you open in your browser. I put together a playbook with the full skill file, the setup, and the exact prompts to customize the dashboard for your account. Want it for free? > Like this post > Comment "DASH" And I'll send it over (must be following so I can DM)

I just built a Claude Cowork skill that turns your Google Ads data into a visual performance dashboard in 60 seconds 🤯 One prompt → campaign breakdowns, CPA trends, spend vs conversions charts, and hourly conversion patterns, all rendered as an interactive HTML dashboard you open in Chrome. All inside Claude Cowork. Perfect for DTC brands and agencies who are pulling Google Ads data into spreadsheets every week, manually building charts, and spending an hour formatting a report that's outdated by the time you send it. If you're managing Google Ads and your weekly reporting workflow looks like this — export a CSV, open Google Sheets, build a pivot table, copy the numbers into a slide deck, manually create charts, format everything, realize you forgot a campaign, start over ... This skill does the whole thing in one prompt: → Connects to your live Google Ads data via MCP → Pulls spend, conversions, CPA, ROAS, CTR across every campaign → Builds an interactive HTML dashboard → Summary cards at the top: total spend, total conversions, avg CPA, avg ROAS → Bar chart comparing spend vs conversions by campaign → CPA trend line over the last 30 days → Campaign table ranked by performance, color-coded green/yellow/red → Opens in Chrome: hover over charts, compare campaigns, screenshot for your team No spreadsheets. No manual chart building. No hour-long formatting sessions. What you get: → A visual dashboard from live data in under 60 seconds → Campaign performance you can actually see, not just read in a table → CPA trends that show you where things are heading, not just where they are → A dashboard you can screenshot and drop into Slack, a client report, or a team standup → Reusable — run it weekly and the data updates automatically One prompt. Live data. A finished dashboard you open in your browser. I put together a playbook with the full skill file, the setup, and the exact prompts to customize the dashboard for your account. Want it for free? > Like this post > Comment "DASH" And I'll send it over (must be following so I can DM)

Mike Futia

38,806 views • 4 months ago

This AI UGC workflow is f*cking nuts 🤯 One prompt -> five completely different characters + five full ad variations, all generated automatically in a single run. Perfect for DTC brands and creative agencies who need volume but don't have time to build each variation from scratch. Most people making AI UGC are doing it one video at a time. New character, new prompt, new script, new render. Repeat. It works, but it doesn't scale. By the time you've built 5 variations to test, you've burned half a day. This workflow solves it: → Enter one initial prompt with your product and angle → Auto-generates 5 unique AI characters → Builds hook scripts for each variation → Writes the bridge with your actual product image → Creates the CTA — all 5 versions in one shot No building each video manually. No copy-pasting prompts over and over. No bottleneck between idea and creative testing. What you get: > 5 unique character variations from a single prompt > Hook, bridge, and CTA scripts tailored to each character > Product image integration baked in > A repeatable system you can run every time you need fresh creative Built 100% with AI. Want a copy of the full workflow for free? > Like this post > Comment "UGC" And I'll send it over (must be following so I can DM)

This AI UGC workflow is f*cking nuts 🤯 One prompt -> five completely different characters + five full ad variations, all generated automatically in a single run. Perfect for DTC brands and creative agencies who need volume but don't have time to build each variation from scratch. Most people making AI UGC are doing it one video at a time. New character, new prompt, new script, new render. Repeat. It works, but it doesn't scale. By the time you've built 5 variations to test, you've burned half a day. This workflow solves it: → Enter one initial prompt with your product and angle → Auto-generates 5 unique AI characters → Builds hook scripts for each variation → Writes the bridge with your actual product image → Creates the CTA — all 5 versions in one shot No building each video manually. No copy-pasting prompts over and over. No bottleneck between idea and creative testing. What you get: > 5 unique character variations from a single prompt > Hook, bridge, and CTA scripts tailored to each character > Product image integration baked in > A repeatable system you can run every time you need fresh creative Built 100% with AI. Want a copy of the full workflow for free? > Like this post > Comment "UGC" And I'll send it over (must be following so I can DM)

Mike Futia

15,227 views • 5 months ago

I just built a Google Ads Builder in Claude Code that turns one URL into a complete, launch-ready campaign 🤯 Point it at your website and it builds the whole Google Search campaign — keywords, ad groups, every headline, the negative list — structured the way a good paid-search manager would. All inside Claude Code. Perfect for DTC brands and agencies who need Search live but don't have days to build it right. If you're staring at a blank Google Ads account, researching keywords one browser tab at a time, writing 15 headlines per ad group to a 30-character limit, guessing at a negative list while budget quietly leaks on junk clicks... This builds the entire campaign from a single input — your homepage URL: → Reads your site and works out what you sell and who for → Groups keywords into tight, high-intent ad groups → Writes every Responsive Search Ad — 15 headlines, 4 descriptions, to Google's exact limits → Builds a negative-keyword list so you stop paying for junk clicks → Adds sitelinks, callouts, match types, bidding, and a budget split → Exports a Google Ads Editor CSV you import in one click No blank-account paralysis. No keyword rabbit holes. No character-counting 60 headlines by hand. What you get: → A launch-ready campaign from just your URL → Tight ad groups built for Quality Score, not a keyword dump → Every ad written to Google's limits and policy → A one-click CSV import plus a full campaign dashboard Built 100% in Claude Code. No API keys, no Google Ads login. And I'm not sending a playbook this time — I'm giving the whole skill away for free. The actual file. Install it and build your own campaign in 5 minutes. Want the skill? > Like this post > Comment "BUILD" And I'll send it over (must be following so I can DM)

I just built a Google Ads Builder in Claude Code that turns one URL into a complete, launch-ready campaign 🤯 Point it at your website and it builds the whole Google Search campaign — keywords, ad groups, every headline, the negative list — structured the way a good paid-search manager would. All inside Claude Code. Perfect for DTC brands and agencies who need Search live but don't have days to build it right. If you're staring at a blank Google Ads account, researching keywords one browser tab at a time, writing 15 headlines per ad group to a 30-character limit, guessing at a negative list while budget quietly leaks on junk clicks... This builds the entire campaign from a single input — your homepage URL: → Reads your site and works out what you sell and who for → Groups keywords into tight, high-intent ad groups → Writes every Responsive Search Ad — 15 headlines, 4 descriptions, to Google's exact limits → Builds a negative-keyword list so you stop paying for junk clicks → Adds sitelinks, callouts, match types, bidding, and a budget split → Exports a Google Ads Editor CSV you import in one click No blank-account paralysis. No keyword rabbit holes. No character-counting 60 headlines by hand. What you get: → A launch-ready campaign from just your URL → Tight ad groups built for Quality Score, not a keyword dump → Every ad written to Google's limits and policy → A one-click CSV import plus a full campaign dashboard Built 100% in Claude Code. No API keys, no Google Ads login. And I'm not sending a playbook this time — I'm giving the whole skill away for free. The actual file. Install it and build your own campaign in 5 minutes. Want the skill? > Like this post > Comment "BUILD" And I'll send it over (must be following so I can DM)

Mike Futia

50,943 views • 16 days ago

Claude Cowork Sub-Agents are f*cking cracked 🤯 One prompt → 50 competitor ads analyzed, hooks extracted, and a full creative brief generated. 10 AI agents running in parallel, under 5 minutes. All inside Claude Cowork. Perfect for DTC brands and agencies who are still doing creative research and ad production one task at a time inside Claude. If you're analyzing competitor ads one by one, copying hooks into a spreadsheet manually, writing brief after brief from scratch, and watching Claude's output quality fall off a cliff after the 15th variation because the context window is completely bloated... Sub-agents eliminate the entire bottleneck: → Drop in a spreadsheet of 50 competitor ads and spin up 10 parallel sub-agents → Each sub-agent analyzes 5 ads simultaneously — hooks, angles, CTAs, emotional tone, creative format → They report structured summaries back to the main agent without bloating the context → The main agent synthesizes patterns across all 50 ads into a competitive intel brief → Then spin up another round of sub-agents to generate 30 ad copy variations across 10 personas → Each sub-agent writes for 1-2 personas in a fresh context — so variation 30 is as sharp as variation 1 No analyzing ads one at a time. No context window blowing up halfway through. No copy quality degrading after the first dozen variations. What this gives you: → 50 competitor ads broken down in minutes — hooks, angles, CTAs, formats, all structured → Pattern analysis across the full dataset that you'd miss reviewing ads individually → 30+ ad copy variations with persona-specific messaging that actually stays sharp → A workflow you can save as reusable skills and trigger with one command next time → The same output quality on the last task as the first Built 100% inside Claude Cowork with sub-agents. I put together a full DTC playbook: 5 bulk workflows with copy-paste prompts, the exact sub-agent prompting pattern, batching guidelines, and an honest breakdown of when this setup is worth it vs. when a simpler approach is the better move. Want it for free? > Like this post > Comment "AGENTS" And I'll send it over (must be following so I can DM)

Claude Cowork Sub-Agents are f*cking cracked 🤯 One prompt → 50 competitor ads analyzed, hooks extracted, and a full creative brief generated. 10 AI agents running in parallel, under 5 minutes. All inside Claude Cowork. Perfect for DTC brands and agencies who are still doing creative research and ad production one task at a time inside Claude. If you're analyzing competitor ads one by one, copying hooks into a spreadsheet manually, writing brief after brief from scratch, and watching Claude's output quality fall off a cliff after the 15th variation because the context window is completely bloated... Sub-agents eliminate the entire bottleneck: → Drop in a spreadsheet of 50 competitor ads and spin up 10 parallel sub-agents → Each sub-agent analyzes 5 ads simultaneously — hooks, angles, CTAs, emotional tone, creative format → They report structured summaries back to the main agent without bloating the context → The main agent synthesizes patterns across all 50 ads into a competitive intel brief → Then spin up another round of sub-agents to generate 30 ad copy variations across 10 personas → Each sub-agent writes for 1-2 personas in a fresh context — so variation 30 is as sharp as variation 1 No analyzing ads one at a time. No context window blowing up halfway through. No copy quality degrading after the first dozen variations. What this gives you: → 50 competitor ads broken down in minutes — hooks, angles, CTAs, formats, all structured → Pattern analysis across the full dataset that you'd miss reviewing ads individually → 30+ ad copy variations with persona-specific messaging that actually stays sharp → A workflow you can save as reusable skills and trigger with one command next time → The same output quality on the last task as the first Built 100% inside Claude Cowork with sub-agents. I put together a full DTC playbook: 5 bulk workflows with copy-paste prompts, the exact sub-agent prompting pattern, batching guidelines, and an honest breakdown of when this setup is worth it vs. when a simpler approach is the better move. Want it for free? > Like this post > Comment "AGENTS" And I'll send it over (must be following so I can DM)

Mike Futia

50,099 views • 4 months ago

Claude Design + Shopify is f*cking ridiculous 🤯 You can now publish pages from Claude Design → Claude Code → Shopify. Built 100% with Claude Design, Claude Code, and the Shopify CLI. Perfect for DTC brands and agencies who want to skip the design → dev handoff entirely. Here's how it works: → Design any landing page in Claude Design → Export as a zip and drop it into Claude Code → Install the Shopify + Shopify AI Toolkit plugins → Prompt Claude to convert the HTML into a Shopify page template + push to live theme → Claude uploads the images, deploys the files, and creates a published page No more handing designs off to a dev and waiting 2 weeks for a Shopify page. What you get: - A workflow that turns any Claude Design page into a real Shopify page template - Editable sections so your marketing team can swap copy, images, and CTAs without code - Images uploaded straight to Shopify Files automatically - A files-only deploy that only touches what's new in your live theme - A repeatable pipeline you can use every time you design a new landing page This is essentially the design-to-deploy pipeline brands have been waiting for. I put together a step-by-step playbook for going from Claude Design → published Shopify page. Every install, every plugin, every command, and the exact prompt that runs the whole thing. Want the playbook for free? > Like this post > Comment "SHOP" And I'll send it over (must be following so I can DM)

Claude Design + Shopify is f*cking ridiculous 🤯 You can now publish pages from Claude Design → Claude Code → Shopify. Built 100% with Claude Design, Claude Code, and the Shopify CLI. Perfect for DTC brands and agencies who want to skip the design → dev handoff entirely. Here's how it works: → Design any landing page in Claude Design → Export as a zip and drop it into Claude Code → Install the Shopify + Shopify AI Toolkit plugins → Prompt Claude to convert the HTML into a Shopify page template + push to live theme → Claude uploads the images, deploys the files, and creates a published page No more handing designs off to a dev and waiting 2 weeks for a Shopify page. What you get: - A workflow that turns any Claude Design page into a real Shopify page template - Editable sections so your marketing team can swap copy, images, and CTAs without code - Images uploaded straight to Shopify Files automatically - A files-only deploy that only touches what's new in your live theme - A repeatable pipeline you can use every time you design a new landing page This is essentially the design-to-deploy pipeline brands have been waiting for. I put together a step-by-step playbook for going from Claude Design → published Shopify page. Every install, every plugin, every command, and the exact prompt that runs the whole thing. Want the playbook for free? > Like this post > Comment "SHOP" And I'll send it over (must be following so I can DM)

Mike Futia

57,141 views • 2 months ago

I just built a complete SEO audit plugin in Claude Code that replaces your $200/mo Ahrefs subscription 🤯 One Claude Plugin audits any store: technical SEO, product schema, content, Core Web Vitals, and AI-search readiness. Parallel agents, a 0-100 score, and a dashboard that renders right in the panel. All inside Claude Code. So I pointed it at Ridge .com, one of the sharpest DTC operators out there. It came back 56/100, and what stood out wasn't a knock on them at all: Ridge has a better AI-commerce setup than 99% of stores. A real llms.txt, an agent-discovery sitemap, a live MCP endpoint, genuinely ahead of the curve. And even on a store that dialed-in, the audit surfaced fixable gaps in ~90 seconds: → Room to add product structured data → A mobile Core Web Vitals score worth tightening → A thin meta description on a high-traffic collection Perfect for e-comm operators and SEO agencies who are sick of paying $200/mo for tools that bury the real issues, running quarterly audits that take a week, and shipping reports nobody can act on. So I put together the full playbook to build your own. The complete guide to building this Plugin in Claude Code: branded to you, tuned to exactly how you audit, repeatable across every client. The kind of audit you run in minutes and hand over as a deliverable that looks like it cost thousands. What's inside: → The architecture (orchestrator + parallel sub-agents) → How to fetch any store past Cloudflare → The 0-100 scoring + falsifiable-findings framework → How to ship the HTML dashboard for client demos → The full build, start to finish Want the playbook for free? > Like this post > Comment "SEO" And I'll send it over (must be following so I can DM)

I just built a complete SEO audit plugin in Claude Code that replaces your $200/mo Ahrefs subscription 🤯 One Claude Plugin audits any store: technical SEO, product schema, content, Core Web Vitals, and AI-search readiness. Parallel agents, a 0-100 score, and a dashboard that renders right in the panel. All inside Claude Code. So I pointed it at Ridge .com, one of the sharpest DTC operators out there. It came back 56/100, and what stood out wasn't a knock on them at all: Ridge has a better AI-commerce setup than 99% of stores. A real llms.txt, an agent-discovery sitemap, a live MCP endpoint, genuinely ahead of the curve. And even on a store that dialed-in, the audit surfaced fixable gaps in ~90 seconds: → Room to add product structured data → A mobile Core Web Vitals score worth tightening → A thin meta description on a high-traffic collection Perfect for e-comm operators and SEO agencies who are sick of paying $200/mo for tools that bury the real issues, running quarterly audits that take a week, and shipping reports nobody can act on. So I put together the full playbook to build your own. The complete guide to building this Plugin in Claude Code: branded to you, tuned to exactly how you audit, repeatable across every client. The kind of audit you run in minutes and hand over as a deliverable that looks like it cost thousands. What's inside: → The architecture (orchestrator + parallel sub-agents) → How to fetch any store past Cloudflare → The 0-100 scoring + falsifiable-findings framework → How to ship the HTML dashboard for client demos → The full build, start to finish Want the playbook for free? > Like this post > Comment "SEO" And I'll send it over (must be following so I can DM)

Mike Futia

55,401 views • 2 months ago

Claude Code + Nano Banana 2 is f*cking cracked 🤯 I built a skill inside Claude Code that writes JSON image prompts for Nano Banana 2, and the outputs look like they came from a professional photo shoot. One plain-text prompt. Claude rewrites it as structured JSON with lighting, camera, composition, style, and negative prompts. Then fires it off to Nano Banana 2. All inside Claude Code. Perfect for DTC brands and agencies who need high-volume ad creative without booking a shoot. If you're using Nano Banana 2 for product shots and lifestyle images but every generation feels like pulling a slot machine lever — random lighting, inconsistent style, plastic skin, misspelled labels ... This skill fixes the entire output: → You describe what you want in plain English → Claude rewrites it as a structured JSON prompt (lighting, camera angle, lens, depth of field, color grading — all of it) → Fires it to Nano Banana 2 via API → Saves the prompt + image in organized folders → You iterate on the style until it's dialed, then every output matches No more slot machine prompting. No more inconsistent brand imagery. No more burning credits on unusable generations. What you get: - Photo-realistic product shots and lifestyle images on demand - Full control over style, lighting, composition, and camera settings - Saved JSON prompts you can reuse across every campaign - A skill that gets smarter the more feedback you give it Built 100% in Claude Code with a custom skill + Python scripts. I put together a full playbook showing the exact skill, the JSON schema, and the workflow to set this up yourself. Want the full playbook? > Like this post > Comment "BANANA" And I'll send it over (must be following so I can DM)

NOVA

63,871 views • 4 months ago

Claude Code + Nano Banana 2 is f*cking cracked 🤯 I built a skill inside Claude Code that writes JSON image prompts for Nano Banana 2, and the outputs look like they came from a professional photo shoot. One plain-text prompt. Claude rewrites it as structured JSON with lighting, camera, composition, style, and negative prompts. Then fires it off to Nano Banana 2. All inside Claude Code. Perfect for DTC brands and agencies who need high-volume ad creative without booking a shoot. If you're using Nano Banana 2 for product shots and lifestyle images but every generation feels like pulling a slot machine lever — random lighting, inconsistent style, plastic skin, misspelled labels ... This skill fixes the entire output: → You describe what you want in plain English → Claude rewrites it as a structured JSON prompt (lighting, camera angle, lens, depth of field, color grading — all of it) → Fires it to Nano Banana 2 via API → Saves the prompt + image in organized folders → You iterate on the style until it's dialed, then every output matches No more slot machine prompting. No more inconsistent brand imagery. No more burning credits on unusable generations. What you get: - Photo-realistic product shots and lifestyle images on demand - Full control over style, lighting, composition, and camera settings - Saved JSON prompts you can reuse across every campaign - A skill that gets smarter the more feedback you give it Built 100% in Claude Code with a custom skill + Python scripts. I put together a full playbook showing the exact skill, the JSON schema, and the workflow to set this up yourself. Want the full playbook? > Like this post > Comment "BANANA" And I'll send it over (must be following so I can DM)

Mike Futia

211,619 views • 5 months ago

Claude Cowork is f*cking ridiculous 🤯 One prompt → competitive research, creative briefs, 15 hook variations, and a full performance dashboard. All saved as real files on your computer. All inside Claude Desktop. If you're spending hours every week copy-pasting between tools, pulling competitor ads manually, writing briefs from scratch, and building reports in spreadsheets ... Claude Cowork eliminates the entire loop: → Point it at your project folder with brand voice + context files → It asks YOU clarifying questions instead of guessing → It builds a multi-step plan and executes while you step away → It creates real .docx, .xlsx, .pptx files — not chat responses → It connects to Slack, Google Drive, Airtable, and 50+ tools live No copy-pasting between tools. No babysitting the AI mid-task. No downloading and re-uploading files. What you get: → Competitive research synthesized into actionable creative angles → Ad briefs, hooks, and scripts generated in your brand voice → Interactive HTML dashboards built from your own customer data → Weekly performance reports created while you're getting coffee Built 100% inside Claude Desktop with skills, plugins, and connectors. I put together a full DTC playbook: 10 workflows with copy-paste prompts, the exact setup process, and the weekly operating rhythm I use. Want it for free? > Like this post > Comment "COWORK" And I'll send it over (must be following so I can DM)

Utkarsh Sharma

29,875 views • 4 months ago

This Claude Code Skills Pack is a cheat code for ad creative teams 🤯 10 plug-and-play skills → competitor audits, creative briefs, 20 hook variations, ad copy, static ads, landing pages, & weekly performance reports. All inside Claude Code. Perfect for DTC brands and agencies who are still prompting Claude Code from scratch every time. If you're re-explaining your brand voice in every session, getting inconsistent output depending on who's prompting, and spending 30 minutes on tasks that should take 30 seconds... These skills eliminate the entire loop: → Competitor Ad Research Agent Drop a brand name, get back a full creative audit — hooks, messaging angles, ad formats, CTAs, and "steal this" angles. No more scrolling the Ad Library for an hour. → Creative Brief Generator One prompt, complete brief in your exact template. Hooks, concepts, visual direction, brand voice — all loaded from your own files. → Hook & Script Writer 15+ hooks categorized by type (curiosity, problem-agitation, result-first, social proof). Full 30-60s scripts with the hook → problem → mechanism → proof → CTA structure baked in. → Ad Copy Variation Engine Feed it one winning ad, get back 20 variations — each targeting a different persona and pain point. Same structure, different angles. Creative fatigue solved. → Weekly Report Writer Drop in your Meta ads CSV. Get back the narrative summary, anomaly flags, creative fatigue alerts, and recommended next steps. The report nobody wants to write, written in 60 seconds. → Creative Fatigue Detector Flags ads before they die. CTR trending down, frequency climbing, conversion rate dropping — caught in hours, not after three days of wasted spend. No prompting from scratch every time. No inconsistent output across your team. No re-explaining context in every session. I packaged all 10 as a free Skills Pack. Copy-paste the files into your Claude Code commands folder and they just work. Want the full Skills Pack? > Like this post > Comment "SKILLS" And I'll send it over (must be following so I can DM)

Mike Futia

55,850 views • 4 months ago