Video yükleniyor...

Video Yüklenemedi

Ana Sayfaya Dön

Let the robot take the risky climb. 🧗‍♂️🤖 RobotPlusPlus just introduced a humanoid special-operation robot for high-risk industrial sites, built on a wheeled magnetic-adhesion base that can lock onto steel walls while it works. Dual arms, swappable tools, one platform: welding, flaw detection, rust removal, grinding, spraying. That is...

XRoboHub's profile picture

RoboHub🤖

20,704 subscribers

96,195 görüntüleme • 3 ay önce •via X (Twitter)

Bilim & Teknoloji
LIVE

Anya Rossi• Live Now

Private livecam show

0 Yorum

Yorum bulunmuyor

Orijinal gönderinin yorumları burada görünecek

Benzer Videolar

A humanoid robot is now climbing vertical industrial tanks to weld, grind, inspect, and remove rust. 🧲🤖 This is RobotPlusPlus’ embodied-intelligence wall-climbing robot, now deployed in high-risk scenes across chemical plants, shipyards, and energy facilities. The upper body uses dual humanoid arms. The lower body uses a wheeled magnetic-adhesion chassis that lets the robot work on steel walls instead of flat factory floors. The reported specs are industrial, not demo-stage: 90 kg body weight, 15 degrees of freedom, 12 active arm joints, millisecond-level remote response, and tethered power for long-duration operation. The real advantage is tool switching. Swap the end effectors, and the same platform can move between welding, grinding, flaw detection, rust removal, spraying, and surface treatment. For operators, the workflow changes from climbing scaffolds or hanging in baskets to controlling the robot through a remote interface and VR glasses. RobotPlusPlus says its special-operation model has learned from 100,000+ hours of field work, 22,500 km of operating distance, and 5,000 km² of covered work area. This is where embodied AI starts to look useful: not dancing onstage, but taking tools into places humans should not have to enter.
3:18

A humanoid robot is now climbing vertical industrial tanks to weld, grind, inspect, and remove rust. 🧲🤖 This is RobotPlusPlus’ embodied-intelligence wall-climbing robot, now deployed in high-risk scenes across chemical plants, shipyards, and energy facilities. The upper body uses dual humanoid arms. The lower body uses a wheeled magnetic-adhesion chassis that lets the robot work on steel walls instead of flat factory floors. The reported specs are industrial, not demo-stage: 90 kg body weight, 15 degrees of freedom, 12 active arm joints, millisecond-level remote response, and tethered power for long-duration operation. The real advantage is tool switching. Swap the end effectors, and the same platform can move between welding, grinding, flaw detection, rust removal, spraying, and surface treatment. For operators, the workflow changes from climbing scaffolds or hanging in baskets to controlling the robot through a remote interface and VR glasses. RobotPlusPlus says its special-operation model has learned from 100,000+ hours of field work, 22,500 km of operating distance, and 5,000 km² of covered work area. This is where embodied AI starts to look useful: not dancing onstage, but taking tools into places humans should not have to enter.

RoboHub🤖

79,853 görüntüleme • 3 ay önce

From the Ground to the Skies High-risk operations are now entrusted to humanoid robots, sparing humans the need to risk their lives working at heights of several hundred meters. For example, Robot++’s specialized semi-humanoid platform designed for high-altitude work. Indeed, it is not a fullyhumanoid robot. Its upper body is humanoid in form, allowing for the customized installation of various end effectors; its dual arms work in tandem,welding with one while grinding with the other. Its lower body consists of a wheeled chassis equipped with magnetic adhesion capabilities, enabling movement both vertically and horizontally. TBH,even when operated remotely--from the safety of the ground,former welders are transformed into professional operators, no longer required to place themselves in harm's way.
0:29

From the Ground to the Skies High-risk operations are now entrusted to humanoid robots, sparing humans the need to risk their lives working at heights of several hundred meters. For example, Robot++’s specialized semi-humanoid platform designed for high-altitude work. Indeed, it is not a fullyhumanoid robot. Its upper body is humanoid in form, allowing for the customized installation of various end effectors; its dual arms work in tandem,welding with one while grinding with the other. Its lower body consists of a wheeled chassis equipped with magnetic adhesion capabilities, enabling movement both vertically and horizontally. TBH,even when operated remotely--from the safety of the ground,former welders are transformed into professional operators, no longer required to place themselves in harm's way.

CyberRobo

20,952 görüntüleme • 3 ay önce

This robot climbs steel walls like a machine from the future. 🤖🧲 Magnetic wheels let it move vertically across ferromagnetic surfaces, making robots like this useful for ship hull cleaning, rust removal, inspection and painting. Instead of sending workers onto dangerous surfaces, the robot can bring the tools to the wall. Would you trust a robot to maintain the outside of a ship? 👀 🎥 Media: Peter Kappes ( Linkedln ) ⚠️ This content is shared for informational purposes only. CTO Robotics Media is a media platform and does not own or develop the technology shown. Credit belongs to the original creators. #Robotics #WallClimbingRobot #IndustrialRobotics #Automation #Shipbuilding #MaintenanceTech #Engineering #Innovation #FutureTech
0:31

This robot climbs steel walls like a machine from the future. 🤖🧲 Magnetic wheels let it move vertically across ferromagnetic surfaces, making robots like this useful for ship hull cleaning, rust removal, inspection and painting. Instead of sending workers onto dangerous surfaces, the robot can bring the tools to the wall. Would you trust a robot to maintain the outside of a ship? 👀 🎥 Media: Peter Kappes ( Linkedln ) ⚠️ This content is shared for informational purposes only. CTO Robotics Media is a media platform and does not own or develop the technology shown. Credit belongs to the original creators. #Robotics #WallClimbingRobot #IndustrialRobotics #Automation #Shipbuilding #MaintenanceTech #Engineering #Innovation #FutureTech

CTO ROBOTICS Media

34,202 görüntüleme • 11 gün önce

Midea's six armed robot beast is already on the job, but what exactly can it do? 🤖🦾 The MIRO U humanoid is now working at Midea's laundry appliance industrial park in Wuxi. It features six coordinated arms that can lock and fasten six separate screws simultaneously with high precision. Do you think this kind of multi arm coordination will actually boost factory efficiency?
0:28

Midea's six armed robot beast is already on the job, but what exactly can it do? 🤖🦾 The MIRO U humanoid is now working at Midea's laundry appliance industrial park in Wuxi. It features six coordinated arms that can lock and fasten six separate screws simultaneously with high precision. Do you think this kind of multi arm coordination will actually boost factory efficiency?

RoboHub🤖

19,757 görüntüleme • 5 ay önce

Dax Robotics just unveiled Qiji T1000 — a ton-class robot horse built to carry 1,000 kg / 2,205 lb. 🐎🤖 Dax calls it the world’s first ton-class heavy-load robot horse. The other number is the one that really got me: over 2,000 N·m of joint torque. That is not the usual “robot dog with a backpack” category. Qiji T1000 is being positioned for heavy-load field work: security patrols, emergency rescue, construction sites, industrial logistics. The reported terrain list is exactly where wheels struggle: snow, ice, steep slopes, mountain paths, broken ground. And the use cases are not cute. Carrying supplies on high-altitude patrol routes. Moving rescue gear into fire-risk zones. Hauling steel, cement, tools, and equipment where large vehicles can’t reach. Dax also says the system can run for 1-2 days with its high-voltage power setup. The key point is simple: This is not about making quadrupeds more entertaining. It is about pushing legged robots into real heavy-duty labor — where payload, torque, terrain, and endurance actually matter. Qiji T1000 is a machine horse in the most literal sense. Built less to perform. Built more to carry.
0:49

Dax Robotics just unveiled Qiji T1000 — a ton-class robot horse built to carry 1,000 kg / 2,205 lb. 🐎🤖 Dax calls it the world’s first ton-class heavy-load robot horse. The other number is the one that really got me: over 2,000 N·m of joint torque. That is not the usual “robot dog with a backpack” category. Qiji T1000 is being positioned for heavy-load field work: security patrols, emergency rescue, construction sites, industrial logistics. The reported terrain list is exactly where wheels struggle: snow, ice, steep slopes, mountain paths, broken ground. And the use cases are not cute. Carrying supplies on high-altitude patrol routes. Moving rescue gear into fire-risk zones. Hauling steel, cement, tools, and equipment where large vehicles can’t reach. Dax also says the system can run for 1-2 days with its high-voltage power setup. The key point is simple: This is not about making quadrupeds more entertaining. It is about pushing legged robots into real heavy-duty labor — where payload, torque, terrain, and endurance actually matter. Qiji T1000 is a machine horse in the most literal sense. Built less to perform. Built more to carry.

RoboHub🤖

120,983 görüntüleme • 3 ay önce

A new humanoid robot Spirit AI from China releases a new generation of wheeled humanoid robot Moz1 It is the first embodied intelligent robot with high-precision force control of the whole body, with 26 degrees of freedom, built based on the world's highest power density integrated force control joint. It takes speed, precision and safety to a higher level. It is worth mentioning that Moz1 is driven by SpiritAI's latest OneTwoVLA. It only needs one model to think and operate at the same time, and correct errors autonomously, just like humans, without separating the two systems of "thinking planning" and "coordinated execution". One system is seamlessly connected, which is conducive to dealing with complex, personalized, and immediate tasks, especially in home and care applications.
1:00

A new humanoid robot Spirit AI from China releases a new generation of wheeled humanoid robot Moz1 It is the first embodied intelligent robot with high-precision force control of the whole body, with 26 degrees of freedom, built based on the world's highest power density integrated force control joint. It takes speed, precision and safety to a higher level. It is worth mentioning that Moz1 is driven by SpiritAI's latest OneTwoVLA. It only needs one model to think and operate at the same time, and correct errors autonomously, just like humans, without separating the two systems of "thinking planning" and "coordinated execution". One system is seamlessly connected, which is conducive to dealing with complex, personalized, and immediate tasks, especially in home and care applications.

CyberRobo

26,755 görüntüleme • 1 yıl önce

Most robotics teams can make a robot move… very few can make it work every day in the real world! @roboforce_inc was just featured in Jensen Huang’s GTC keynote, not for a demo but for a robot they claim is already working in the field. Their system, TITAN, is built for industrial environments: ✅ 40 kg dual-arm payload ✅ millimeter-level precision ✅ 8 hours runtime ✅ early pilots in energy, logistics, and manufacturing They call it Physical AI: The focus is on getting robots to do the kind of labor that still depends on people: repetitive, risky, and physical. IMO, what stands out isn’t the specs. It’s the claim of 11,000 robot orders❗️ If even a fraction of that turns into real deployments, it would make RoboForce one of the most widely scaled robot platforms in the world!!?? The open question is whether this shift from prototype to production is real or just the next phase of robotics storytelling. It looks very promising to me. It’s also interesting how their founder openly pushes back against the humanoid trend, arguing for wheels over legs in real industrial settings. It’s an unusual perspective in a time when humanoids get most of the attention. If they are right, the next humanoid robotics wave might look less like a human and more like an industrial version. Seen at —- Weekly robotics and AI insights. Subscribe free:
0:29

Most robotics teams can make a robot move… very few can make it work every day in the real world! @roboforce_inc was just featured in Jensen Huang’s GTC keynote, not for a demo but for a robot they claim is already working in the field. Their system, TITAN, is built for industrial environments: ✅ 40 kg dual-arm payload ✅ millimeter-level precision ✅ 8 hours runtime ✅ early pilots in energy, logistics, and manufacturing They call it Physical AI: The focus is on getting robots to do the kind of labor that still depends on people: repetitive, risky, and physical. IMO, what stands out isn’t the specs. It’s the claim of 11,000 robot orders❗️ If even a fraction of that turns into real deployments, it would make RoboForce one of the most widely scaled robot platforms in the world!!?? The open question is whether this shift from prototype to production is real or just the next phase of robotics storytelling. It looks very promising to me. It’s also interesting how their founder openly pushes back against the humanoid trend, arguing for wheels over legs in real industrial settings. It’s an unusual perspective in a time when humanoids get most of the attention. If they are right, the next humanoid robotics wave might look less like a human and more like an industrial version. Seen at —- Weekly robotics and AI insights. Subscribe free:

Ilir Aliu

27,741 görüntüleme • 9 ay önce

Elon Musk just put a number on the flaw at the center of Nvidia’s empire. Wall Street has not done the math yet. Nvidia’s Blackwell is the most sought-after silicon on Earth. Every AI lab wants it. Every sovereign nation is bidding for it. Blackwell runs every model, for every company, in every data center on the planet. That universality built the empire. It is also the fracture point. Musk: “We believe the AI5 chip will be about a third of the power of an Nvidia Blackwell for roughly comparable performance. And much less than 10% of the cost.” One-third the power. Comparable performance. Less than ten percent of the cost. Musk: “This is a chip that is very much optimized for the Tesla AI software stack. It’s not meant to be a general purpose chip.” Nvidia builds silicon that serves a million different customers. Every transistor spent on universal compatibility is a transistor not dedicated to one task. Tesla is building silicon for exactly one customer. Itself. When you strip away every function you will never call, you do not get a lesser chip. You get a weapon. Here is what the market refuses to see. Data centers drink unlimited power from the grid. Robots run on batteries. Musk: “In order to have a functional robot, you have to have a great AI chip. And it needs to be an inexpensive chip and it needs to be very power efficient.” You cannot put a Blackwell inside a walking machine. It would drain the battery before it crossed the room. The entire AI revolution lives inside air-conditioned buildings bolted to the electrical grid. Musk is not competing for that market. He is engineering the silicon that survives outside of it. One-third the power is not a spec sheet footnote. It is the physics threshold that severs intelligence from the wall socket. Without that number, every robot on Earth stays tethered. With it, the algorithm walks. Less than ten percent of the cost is not a pricing strategy. It is the line where a machine brain stops being a capital expenditure and becomes a commodity component. When the chip inside a humanoid costs less than the motors in its legs, you do not manufacture hundreds of robots. You manufacture millions. Wall Street is valuing the AI revolution by who dominates the data center. Musk is building the only silicon designed to leave one. Nvidia built the brain of the cloud. Musk is building the brain of the physical world. No one has priced that in yet.
0:56

Elon Musk just put a number on the flaw at the center of Nvidia’s empire. Wall Street has not done the math yet. Nvidia’s Blackwell is the most sought-after silicon on Earth. Every AI lab wants it. Every sovereign nation is bidding for it. Blackwell runs every model, for every company, in every data center on the planet. That universality built the empire. It is also the fracture point. Musk: “We believe the AI5 chip will be about a third of the power of an Nvidia Blackwell for roughly comparable performance. And much less than 10% of the cost.” One-third the power. Comparable performance. Less than ten percent of the cost. Musk: “This is a chip that is very much optimized for the Tesla AI software stack. It’s not meant to be a general purpose chip.” Nvidia builds silicon that serves a million different customers. Every transistor spent on universal compatibility is a transistor not dedicated to one task. Tesla is building silicon for exactly one customer. Itself. When you strip away every function you will never call, you do not get a lesser chip. You get a weapon. Here is what the market refuses to see. Data centers drink unlimited power from the grid. Robots run on batteries. Musk: “In order to have a functional robot, you have to have a great AI chip. And it needs to be an inexpensive chip and it needs to be very power efficient.” You cannot put a Blackwell inside a walking machine. It would drain the battery before it crossed the room. The entire AI revolution lives inside air-conditioned buildings bolted to the electrical grid. Musk is not competing for that market. He is engineering the silicon that survives outside of it. One-third the power is not a spec sheet footnote. It is the physics threshold that severs intelligence from the wall socket. Without that number, every robot on Earth stays tethered. With it, the algorithm walks. Less than ten percent of the cost is not a pricing strategy. It is the line where a machine brain stops being a capital expenditure and becomes a commodity component. When the chip inside a humanoid costs less than the motors in its legs, you do not manufacture hundreds of robots. You manufacture millions. Wall Street is valuing the AI revolution by who dominates the data center. Musk is building the only silicon designed to leave one. Nvidia built the brain of the cloud. Musk is building the brain of the physical world. No one has priced that in yet.

Dustin

160,633 görüntüleme • 4 ay önce

Anduril Founder Palmer Luckey on the Future of U.S. Energy: “There are so many things the United States needs to do on the energy front if we’re going to be competitive globally.” “The good news is, it looks like this administration is going to allow nuclear power to come roaring back.” “I think that for things like factories and data centers… they should just have on-premises power generation.” “They should have small nuclear plants, that way they’re not degrading everyone else’s grid.” “The other problem is the grid has become a political vector. In California, most of our energy cost is not the cost of making the energy… it’s all the political taxes that have been placed on top of it.” “Energy generation needs to become like a lathe or a screwdriver… just another tool at your factory that you use to get the job done.”
1:48

Anduril Founder Palmer Luckey on the Future of U.S. Energy: “There are so many things the United States needs to do on the energy front if we’re going to be competitive globally.” “The good news is, it looks like this administration is going to allow nuclear power to come roaring back.” “I think that for things like factories and data centers… they should just have on-premises power generation.” “They should have small nuclear plants, that way they’re not degrading everyone else’s grid.” “The other problem is the grid has become a political vector. In California, most of our energy cost is not the cost of making the energy… it’s all the political taxes that have been placed on top of it.” “Energy generation needs to become like a lathe or a screwdriver… just another tool at your factory that you use to get the job done.”

Anduril Appreciator

81,998 görüntüleme • 7 ay önce

OFFICIAL: Origins Robot Endgame Boss Fight Around 10-15 minutes into the match, you'll get a notification that either the Z-Rex or Colossus is spawning. For the Colossus, you have to first kill a certain amount of enemies around a portal before it will spawn. Once the Colossus has spawned, you have to shoot either one of its feet until it breaks. Let it step on you and you'll go into it just like in Origins. While in the core, there'll be a plate that glows and pulsates when you stand on it. After awhile, it'll shoot out a pulse that will turn on several red lights around the core. You have to shoot them all in a extremely small time frame. If done right, the cores shield will turn off and you can damage it. This needs to be repeated again for a total of two times. Afterwards, you'll get an exotic skill and have the opportunity to either leave the robot or exfil. If you exfil, you get sent to a special room and get a special exfil and game over cutscene.
1:05

OFFICIAL: Origins Robot Endgame Boss Fight Around 10-15 minutes into the match, you'll get a notification that either the Z-Rex or Colossus is spawning. For the Colossus, you have to first kill a certain amount of enemies around a portal before it will spawn. Once the Colossus has spawned, you have to shoot either one of its feet until it breaks. Let it step on you and you'll go into it just like in Origins. While in the core, there'll be a plate that glows and pulsates when you stand on it. After awhile, it'll shoot out a pulse that will turn on several red lights around the core. You have to shoot them all in a extremely small time frame. If done right, the cores shield will turn off and you can damage it. This needs to be repeated again for a total of two times. Afterwards, you'll get an exotic skill and have the opportunity to either leave the robot or exfil. If you exfil, you get sent to a special room and get a special exfil and game over cutscene.

COD: Zombies News

78,079 görüntüleme • 8 ay önce

Elon Musk: “Optimus Will Be The Biggest Product Ever Created” Let's see Optimus. You know, as you've heard me say before, I think Optimus will be the biggest product ever. But it is a very complex problem to solve. It's one of the hardest things to solve. To make a humanoid robot that can do tasks that you simply ask it to do, or show it a video, and it can do the task without any programming — like, no one's ever achieved this. And there are many challenges in the electromechanical design of the robot, to achieve sufficient dexterity and reliable hands, to be very reliable and have long, long wear and tear. But, I mean, it's good to be out in the field and not break down. Otherwise, you get this 70-kilogram robot that just flopped over, and you could carry it around like a baby, you know. And we don't want Optimus to go haywire. So, it's a lot of work to scale, to get the design right, and to scale production. And I really want to emphasize here that the production scaling challenge is very, very substantial. So this is going to be the hardest product to scale manufacturing that we've ever made at Tesla, because everything on the robot is new. And the difficulty of scaling the production up is proportionate to the newness of the parts in the robot.
1:42

Elon Musk: “Optimus Will Be The Biggest Product Ever Created” Let's see Optimus. You know, as you've heard me say before, I think Optimus will be the biggest product ever. But it is a very complex problem to solve. It's one of the hardest things to solve. To make a humanoid robot that can do tasks that you simply ask it to do, or show it a video, and it can do the task without any programming — like, no one's ever achieved this. And there are many challenges in the electromechanical design of the robot, to achieve sufficient dexterity and reliable hands, to be very reliable and have long, long wear and tear. But, I mean, it's good to be out in the field and not break down. Otherwise, you get this 70-kilogram robot that just flopped over, and you could carry it around like a baby, you know. And we don't want Optimus to go haywire. So, it's a lot of work to scale, to get the design right, and to scale production. And I really want to emphasize here that the production scaling challenge is very, very substantial. So this is going to be the hardest product to scale manufacturing that we've ever made at Tesla, because everything on the robot is new. And the difficulty of scaling the production up is proportionate to the newness of the parts in the robot.

Tesla Owners Silicon Valley

42,131 görüntüleme • 1 ay önce

ELON MUSK: "Optimus will be the biggest product ever, but it is a very complex problem to solve. It's one of the hardest things to solve, to make an autonomous humanoid robot that can do tasks that, if you simply ask it to do something or show it a video, it can do the task without any programming. No one's ever achieved this, and there are many challenges in the design of the robot to achieve sufficient dexterity and to be very reliable and have long wear and tear, meaning it needs to be out in the field and not break down. Otherwise, you've got sort of a 70 kilogram robot that just flopped over and you've got to carry it out like a body, you know, it doesn't have wheels. And we don't want Optimus to go haywire. So it's a lot of work to scale, to get the design right and to scale production. This is going to be the hardest product to scale manufacturing that we've ever made at Tesla because everything on the robot is new. And the difficulty of scaling the production ramp is proportionate to the newness of the parts in the robot. With Optimus, there is no supply chain. So we've had to build up a supply chain in its entirety or in-house the production. The Optimus production line that we're building out in Fremont in place of what used to be the Model S & X production, it looks incredible. It's quite stunning to see."
2:42

ELON MUSK: "Optimus will be the biggest product ever, but it is a very complex problem to solve. It's one of the hardest things to solve, to make an autonomous humanoid robot that can do tasks that, if you simply ask it to do something or show it a video, it can do the task without any programming. No one's ever achieved this, and there are many challenges in the design of the robot to achieve sufficient dexterity and to be very reliable and have long wear and tear, meaning it needs to be out in the field and not break down. Otherwise, you've got sort of a 70 kilogram robot that just flopped over and you've got to carry it out like a body, you know, it doesn't have wheels. And we don't want Optimus to go haywire. So it's a lot of work to scale, to get the design right and to scale production. This is going to be the hardest product to scale manufacturing that we've ever made at Tesla because everything on the robot is new. And the difficulty of scaling the production ramp is proportionate to the newness of the parts in the robot. With Optimus, there is no supply chain. So we've had to build up a supply chain in its entirety or in-house the production. The Optimus production line that we're building out in Fremont in place of what used to be the Model S & X production, it looks incredible. It's quite stunning to see."

DogeDesigner

307,849 görüntüleme • 1 ay önce

this is the world's first ever humanoid robot that will summit Mt. Everest it's named Pemba, and two days ago it reached the top of Chimborazo, a 20,000-foot peak in Ecuador, completely on its own (no remote or operator). and the robot itself is nothing special. Pemba is a Unitree G1, the same ~$14k robot anyone can buy online right now. the guy behind it, Pablo Berlanga, is doing this to send robots into the places that kill people. think about how you'd check on a melting glacier or a deadly crevasse out in the middle of nowhere today. you either send a person who might not come back, or you skip it and learn nothing. so Berlanga wants a robot that walks in on its own, carries a few pounds of gear, and brings back footage from places no human can safely reach. i think eventually they'll even be used for robot rescue missions to reach people stranded in disasters and dangerous situations from here, the plan for Pemba is Mauna Kea in Hawaii, then Everest. Everest is the tricky one. the team wanted to send Pemba up this spring to start hauling trash off the mountain and tracking its glaciers (something Nepal genuinely needs help with) but the Nepalese government told them to wait. there's no law in Nepal for a climber that isn't human, so the rules have to get written before a robot can set foot on the mountain. kind of incredible that the machine is ready for Everest a full year before anyone's decided whether it's allowed to be up there
0:23

this is the world's first ever humanoid robot that will summit Mt. Everest it's named Pemba, and two days ago it reached the top of Chimborazo, a 20,000-foot peak in Ecuador, completely on its own (no remote or operator). and the robot itself is nothing special. Pemba is a Unitree G1, the same ~$14k robot anyone can buy online right now. the guy behind it, Pablo Berlanga, is doing this to send robots into the places that kill people. think about how you'd check on a melting glacier or a deadly crevasse out in the middle of nowhere today. you either send a person who might not come back, or you skip it and learn nothing. so Berlanga wants a robot that walks in on its own, carries a few pounds of gear, and brings back footage from places no human can safely reach. i think eventually they'll even be used for robot rescue missions to reach people stranded in disasters and dangerous situations from here, the plan for Pemba is Mauna Kea in Hawaii, then Everest. Everest is the tricky one. the team wanted to send Pemba up this spring to start hauling trash off the mountain and tracking its glaciers (something Nepal genuinely needs help with) but the Nepalese government told them to wait. there's no law in Nepal for a climber that isn't human, so the rules have to get written before a robot can set foot on the mountain. kind of incredible that the machine is ready for Everest a full year before anyone's decided whether it's allowed to be up there

Ole Lehmann

33,997 görüntüleme • 2 ay önce

Spurs Keldon Johnson: “No one likes to lose. But you think about it, we come in and watch film, and we’re ready for tomorrow. Energy is still high, energy is still the same. Still laughing and joking, but we understand we put ourselves in a little bit of a hole, and we know that we have to really lock in and get it done.”
0:29

Spurs Keldon Johnson: “No one likes to lose. But you think about it, we come in and watch film, and we’re ready for tomorrow. Energy is still high, energy is still the same. Still laughing and joking, but we understand we put ourselves in a little bit of a hole, and we know that we have to really lock in and get it done.”

Spurs Nation

69,891 görüntüleme • 2 ay önce

India and Nigeria "have one of the most forward-looking energy policies that can give you a viewpoint of the next 100 years," huskpowersystem CEO Manoj Sinha tells Tim McDonnell. "In my opinion, Wall Street needs to pay attention to the Global South because the return is there, the risk is not that high."
2:12

India and Nigeria "have one of the most forward-looking energy policies that can give you a viewpoint of the next 100 years," huskpowersystem CEO Manoj Sinha tells Tim McDonnell. "In my opinion, Wall Street needs to pay attention to the Global South because the return is there, the risk is not that high."

Semafor

14,181 görüntüleme • 4 ay önce

Elon Musk: Autonomy and Optimus will actually happen. “At a very high level, I'd say that autonomy is an insanely fundamental breakthrough. And no one is even close to Tesla for solving generalized autonomy or generalized self-driving vehicles. No one's even close. With self-driving, the car becomes roughly five times more useful, but it costs the same to build. Can you imagine what would happen if a company were doing a 25% to 30% percent gross margins, but suddenly that same thing was five times more valuable. What would that do to the value of Tesla ? And the value of that car? It boggles the mind, actually. If you actually do the math on that, it's insane. There's also the Optimus program, which is our humanoid robot, where we will leverage our manufacturing expertise and the intelligence we've developed for self-driving to have a useful humanoid robot. The economy is fundamentally GDP per capita times capita. If you no longer have a constraint on capita because of a useful humanoid robot, it's not clear that there's any limit to the size of the economy. And these things will actually happen.” Baron Investment Conference, 2022
1:16

Elon Musk: Autonomy and Optimus will actually happen. “At a very high level, I'd say that autonomy is an insanely fundamental breakthrough. And no one is even close to Tesla for solving generalized autonomy or generalized self-driving vehicles. No one's even close. With self-driving, the car becomes roughly five times more useful, but it costs the same to build. Can you imagine what would happen if a company were doing a 25% to 30% percent gross margins, but suddenly that same thing was five times more valuable. What would that do to the value of Tesla ? And the value of that car? It boggles the mind, actually. If you actually do the math on that, it's insane. There's also the Optimus program, which is our humanoid robot, where we will leverage our manufacturing expertise and the intelligence we've developed for self-driving to have a useful humanoid robot. The economy is fundamentally GDP per capita times capita. If you no longer have a constraint on capita because of a useful humanoid robot, it's not clear that there's any limit to the size of the economy. And these things will actually happen.” Baron Investment Conference, 2022

ELON CLIPS

34,124 görüntüleme • 1 yıl önce