Let's change a top loading bobbin! Whenever your thread breaks, always check for loose thread tails…
#singer #singerheavyduty #sewingtips
Let's change a top loading bobbin! Whenever your thread breaks, always check for loose thread tails stuck in the machine and brush out your bobbin if it's gotten linty. Pop in the new bobbin and make sure it's turning in the right direction AND properly threaded through the tensioner on the bobbin case.
.
The trickiest step? Bringing the bobbin thread up to the sewing machine surface. The key to doing this is making a full rotation of the top thread through the bobbin case. Rotating the hand wheel towards you, drop the needle down, then back up until it's about to start going down again. This allows the top thread to make a full rotation through the bobbin area.
.
If you tug on your top thread, this will bring up a loop - that is your bobbin thread. Bring both thread tails together and tuck them under your foot. To check that the tension is correct and your machine properly threaded - lift the foot and pull on both threads. They should spool out slowly - not feel stuck or too loose.
This was filmed on a Singer Heavy Duty 4411 which I've been using for 6 months and like a lot for sewing and quilting! Find this machine at
.
#singer #singerheavyduty #sewingtips #sewinghacks #isew #iquilt #sewing #leahdayquilting #homemachinequilting #quiltingtutorial #sewingtutorial #sewingmachine #beginnersewing #quiltingfriends #machinequiltingmachine #beginsewing #sewingtricks
Comments
Comments from the original post on Instagram
No comments yet
