Video wird geladen...

Video konnte nicht geladen werden

Beim Laden dieses Videos ist ein Problem aufgetreten. Dies könnte an einem vorübergehenden Netzwerkproblem liegen oder das Video ist möglicherweise nicht verfügbar.

The difference between de-icing and anti-icing ❄️✈️ Pilots are required to ensure that the wings and all control surfaces are clear of any form of frozen contamination. Even small amounts of ice on the wing can significantly reduce its lift capability as well as the stalling angle of attack.... De-icing fluid is used when the aircraft is contaminated with snow or ice which needs to be removed, but no further freezing precipitation is expected before departure. This can be accompanied by spraying heated fluid onto the aircraft to remove the contamination. If protection from further frozen contamination buildup is required, such as when it’s snowing, we then spray a second fluid over the clean wing, which adheres to the wing and prevents the buildup for a period of time. This time of protection is called the ‘holdover time’ Pilots calculate the holdover time for the fluid used by using tables and entering the fluid type, concentration, type of precipitation and temperature. As a general rule, the higher the number of the fluid used, the longer the holdover time. Eg Type 2 fluid offers a shorter holdover time than Type 4. The fluids can also be diluted to offer varying levels of protection. Eg 75/25 - This means that the mixture being used consists of 75% de-icing fluid and 25% water. The longest holdover time is achieved by using 100% fluid but this can be less environmentally friendly and very expensive. So if we can achieve the desired holdover time with a lower dilution, we can enhance the efficiency of the operation. 📸 by ig/airlinepilotperformance , iarildshow more

aircraftmaintenancengineer

52,170 subscribers

72,064 Aufrufe • vor 9 Monaten •via X (Twitter)

Wissenschaft & Technologie

Anya Rossi• Live Now

Private livecam show

0 Kommentare

Keine Kommentare verfügbar

Kommentare vom Original-Post werden hier angezeigt

Ähnliche Videos

IF YOU SPIN A FEW MIN A DAY YOU REVERSE AGING, RAPIDLY, 1 OF 9999999999 BENEFITS OR CURES HOW TO SPIN: Move from left to right, spinning around and focusing your vision on your left thumb. Then spin from right to left, focus your vision on your right thumb. When you complete spinning, however many times you spin, bring your palms together at chest level. Press them together, keeping your eyes open, and balance yourself with your feet a shoulder's width apart so that you feel anchored and still feel the spinning at the same time. This tremendously accelerates the spinning of the chakra systems inside your body. Many suggest to spin only clockwise but from my experience both directions are necessary! I spin in both directions. I find that I can really stimulate the vestibular system by spinning one way and then suddenly switching to another direction. Its different for everyone but the main goal is to make the fluid in the vestibular system to move in as many different directions as possible. The fluid in the vestibular system has both physical and spiritual qualities. It can be influenced by physical movements and it also can be influence through non physical stimuli like thoughts, emotion, aura fields etc. Eventually you will be able to move the fluid by will. The fluid is what creates the vortex you see. The key to spirituality is the fluid. If you can manage to keep the fluid stimulated and in activity you will be truly spiritual. As a child you had a heightened spirituality! Dont worry, nothing has been lost it’s still all inside you!

IF YOU SPIN A FEW MIN A DAY YOU REVERSE AGING, RAPIDLY, 1 OF 9999999999 BENEFITS OR CURES HOW TO SPIN: Move from left to right, spinning around and focusing your vision on your left thumb. Then spin from right to left, focus your vision on your right thumb. When you complete spinning, however many times you spin, bring your palms together at chest level. Press them together, keeping your eyes open, and balance yourself with your feet a shoulder's width apart so that you feel anchored and still feel the spinning at the same time. This tremendously accelerates the spinning of the chakra systems inside your body. Many suggest to spin only clockwise but from my experience both directions are necessary! I spin in both directions. I find that I can really stimulate the vestibular system by spinning one way and then suddenly switching to another direction. Its different for everyone but the main goal is to make the fluid in the vestibular system to move in as many different directions as possible. The fluid in the vestibular system has both physical and spiritual qualities. It can be influenced by physical movements and it also can be influence through non physical stimuli like thoughts, emotion, aura fields etc. Eventually you will be able to move the fluid by will. The fluid is what creates the vortex you see. The key to spirituality is the fluid. If you can manage to keep the fluid stimulated and in activity you will be truly spiritual. As a child you had a heightened spirituality! Dont worry, nothing has been lost it’s still all inside you!

9

92,801 Aufrufe • vor 5 Monaten

Our general understanding of the characteristics of the physical world are largely restricted by the limited range of our senses. The world appears to be comprised of tangible objects positioned within empty space, separate and distinct. Neither of these characterizations are true. Our unaided senses generate a false interpretation of the true state of reality. Space is note empty, it is substantive with a quantifiable and measurable energy density. Space, in terms of quantum vacuum fluctuations, can be considered as a veritable sea of oscillating energy, like a fluid, quantized at the Planck scale (a billion trillion trillion times smaller than a centimeter) as Planck spherical units, and these tiny oscillators make up the fluid medium of space and comprise the "material" stuff as well. Imagine being able to directly perceive this level of reality. Our photodetector proteins in our eyes are sensitive to electromagnetic radiation in the frequency range of 400 to 800 terahertz (trillions of oscillations per second), and we call this "visible light". If, however, we could see light at the Planck scale, were photons oscillate at the Planck frequency— a mass-energy value that makes the electromagnetic component at order of unity with spacetime curvature— then we would theoretically see directly the substantive fluid medium of space and our sight would relay a world that is integrally interconnected and all one substance; objects would not appear as separate and distinct or even fundamentally different than the substance comprising the bulk space. "Material" objects would appear just as patterned vortices of the fluid that is the very substance of space. So, tangible objects are made of the same substance as space, and only seem physical to our limited senses because of electromagnetic repulsive forces. The electromagnetic repulsive forces are generated by how these PSUs circulate and flow within the structured patterns of space that we call particles and atoms. In this way, the coherent phases, circulation, flow, and pressure forces of this Planck plasma fluid are the source of mass, force, and charge. We are now coming to an understanding of these dynamics at a fundamental level, exemplified in the publication The Origin of Mass and the Nature of Gravity 🔗

Our general understanding of the characteristics of the physical world are largely restricted by the limited range of our senses. The world appears to be comprised of tangible objects positioned within empty space, separate and distinct. Neither of these characterizations are true. Our unaided senses generate a false interpretation of the true state of reality. Space is note empty, it is substantive with a quantifiable and measurable energy density. Space, in terms of quantum vacuum fluctuations, can be considered as a veritable sea of oscillating energy, like a fluid, quantized at the Planck scale (a billion trillion trillion times smaller than a centimeter) as Planck spherical units, and these tiny oscillators make up the fluid medium of space and comprise the "material" stuff as well. Imagine being able to directly perceive this level of reality. Our photodetector proteins in our eyes are sensitive to electromagnetic radiation in the frequency range of 400 to 800 terahertz (trillions of oscillations per second), and we call this "visible light". If, however, we could see light at the Planck scale, were photons oscillate at the Planck frequency— a mass-energy value that makes the electromagnetic component at order of unity with spacetime curvature— then we would theoretically see directly the substantive fluid medium of space and our sight would relay a world that is integrally interconnected and all one substance; objects would not appear as separate and distinct or even fundamentally different than the substance comprising the bulk space. "Material" objects would appear just as patterned vortices of the fluid that is the very substance of space. So, tangible objects are made of the same substance as space, and only seem physical to our limited senses because of electromagnetic repulsive forces. The electromagnetic repulsive forces are generated by how these PSUs circulate and flow within the structured patterns of space that we call particles and atoms. In this way, the coherent phases, circulation, flow, and pressure forces of this Planck plasma fluid are the source of mass, force, and charge. We are now coming to an understanding of these dynamics at a fundamental level, exemplified in the publication The Origin of Mass and the Nature of Gravity 🔗

Nassim Haramein

15,937 Aufrufe • vor 2 Jahren

KLM CANCELS HUNDREDS OF FLIGHTS AS DE-ICING FLUID SUPPLY CRISIS HITS SCHIPHOL Since Friday, January 2, KLM has been de-icing aircraft around the clock at Amsterdam Schiphol, using about 85,000 liters of fluid daily amid severe winter weather in Europe. Persistent snowfall, strong winds, and delayed deliveries from a German supplier have depleted stocks to critical levels. The supplier cannot guarantee timely replenishment, so KLM is collecting fluid directly from Germany. KLM handles de-icing for most aircraft at Schiphol and has deployed its full fleet of 25 vehicles continuously. As of today, 543 flights—about 45% of scheduled departures—have been cancelled at Schiphol. 📹: Epic Aviation Scenes(YouTube)

KLM CANCELS HUNDREDS OF FLIGHTS AS DE-ICING FLUID SUPPLY CRISIS HITS SCHIPHOL Since Friday, January 2, KLM has been de-icing aircraft around the clock at Amsterdam Schiphol, using about 85,000 liters of fluid daily amid severe winter weather in Europe. Persistent snowfall, strong winds, and delayed deliveries from a German supplier have depleted stocks to critical levels. The supplier cannot guarantee timely replenishment, so KLM is collecting fluid directly from Germany. KLM handles de-icing for most aircraft at Schiphol and has deployed its full fleet of 25 vehicles continuously. As of today, 543 flights—about 45% of scheduled departures—have been cancelled at Schiphol. 📹: Epic Aviation Scenes(YouTube)

Turbine Traveller

381,612 Aufrufe • vor 8 Monaten

The Greeks had two ways of thinking about time: Chronos and Kairos. "The time used by storytellers is more cyclical, close to the time of nature. The Greeks talked about Chronos. Chronology time. The one we can measure. Then they talked about Kairos, which is deep time. That is the time of storytelling. Kronos is more measurable. It's easy to calculate. You can depend on clocks, calendars, and schedules. But Kairos is deep time, and you need to pay attention to Kairos. If you're interested in the stories of nature, maybe the journey of a rock, you can't just measure it with that tiny element of time. You have to look at millennia; you have to look at this long duration of time. I've always believed that storytellers should be interested in a much more cyclical notion of time."

The Greeks had two ways of thinking about time: Chronos and Kairos. "The time used by storytellers is more cyclical, close to the time of nature. The Greeks talked about Chronos. Chronology time. The one we can measure. Then they talked about Kairos, which is deep time. That is the time of storytelling. Kronos is more measurable. It's easy to calculate. You can depend on clocks, calendars, and schedules. But Kairos is deep time, and you need to pay attention to Kairos. If you're interested in the stories of nature, maybe the journey of a rock, you can't just measure it with that tiny element of time. You have to look at millennia; you have to look at this long duration of time. I've always believed that storytellers should be interested in a much more cyclical notion of time."

David Perell

309,072 Aufrufe • vor 8 Monaten

🚨🇮🇱 THE MIDDLE EAST AS WE KNOW IT IS BEING REDESIGNED. Former Speaker of the Knesset Avrum Burg says most of the borders in this region were never natural to begin with. "The Middle East of the last decade is not the same Middle East." The borders drawn by 19th and 20th century European powers destroyed centuries of coexistence between Jews, Christians and Muslims. What comes next won't look like what came before. "It's time to think about a post-national Middle East. More fluid. More open. Like it used to be."

🚨🇮🇱 THE MIDDLE EAST AS WE KNOW IT IS BEING REDESIGNED. Former Speaker of the Knesset Avrum Burg says most of the borders in this region were never natural to begin with. "The Middle East of the last decade is not the same Middle East." The borders drawn by 19th and 20th century European powers destroyed centuries of coexistence between Jews, Christians and Muslims. What comes next won't look like what came before. "It's time to think about a post-national Middle East. More fluid. More open. Like it used to be."

Mario Nawfal

160,778 Aufrufe • vor 4 Monaten

our shrimplet harvests are finally ready to be collected! using a moderately-deep water-dingus such as this, we aim to provide the fertile shrimplet with a safe place to release its stash. once the spores are released, the unburdened shrimplet is removed, and the water-dingus is sieved to isolate the fertile spores. next, the spores are desiccated, dehydrated, and preserved inside a stable medium. this ensures that the spores can be re-used for several years. once the time is right, the spores are reactivated in a solution of spore-catalyst, so that they can be reused and re-deposited if necessary. (from ig @ raga_6104)

our shrimplet harvests are finally ready to be collected! using a moderately-deep water-dingus such as this, we aim to provide the fertile shrimplet with a safe place to release its stash. once the spores are released, the unburdened shrimplet is removed, and the water-dingus is sieved to isolate the fertile spores. next, the spores are desiccated, dehydrated, and preserved inside a stable medium. this ensures that the spores can be re-used for several years. once the time is right, the spores are reactivated in a solution of spore-catalyst, so that they can be reused and re-deposited if necessary. (from ig @ raga_6104)

Myths and Stories

26,128 Aufrufe • vor 8 Monaten

#WATCH | Delhi | CPI(M) General Secretary MA Baby says, "We CPI(M) in consultation with other friendly parties, CPI and VCK, we have decided that within a hours' time, we will consult and take a view as a result of which this manufactured stalemate can be avoided and the overall verdict given by the people of Tamil Nadu can be respected. The single largest party should be able to form a government. What is required for that, these three parties are consulting and we will take a decision within few hours" He further says, "The Tamil Nadu election results could not produce a party having majority. But Mr. Vijay's TVK turned out to be the single largest party short of majority for few seats. Going by the practice, the largest party should have been invited to form the government and a specific time period should have been given to prove his majority on the floor of the house. Why the Honorable Governor of Tamil Nadu did not do this is highly intriguing and it is disturbing. In this particular situation, to avoid any other problem in the democratic process. We CPI(M) in consultation with other friendly parties, CPI and VCK, we have decided that within a hours' time, we will consult and take a view as a result of which this manufactured stalemate can be avoided and the overall verdict given by the people of Tamil Nadu can be respected. The single largest party should be able to form a government. What is required for that, these three parties are consulting and we will take a decision within few hours"

#WATCH | Delhi | CPI(M) General Secretary MA Baby says, "We CPI(M) in consultation with other friendly parties, CPI and VCK, we have decided that within a hours' time, we will consult and take a view as a result of which this manufactured stalemate can be avoided and the overall verdict given by the people of Tamil Nadu can be respected. The single largest party should be able to form a government. What is required for that, these three parties are consulting and we will take a decision within few hours" He further says, "The Tamil Nadu election results could not produce a party having majority. But Mr. Vijay's TVK turned out to be the single largest party short of majority for few seats. Going by the practice, the largest party should have been invited to form the government and a specific time period should have been given to prove his majority on the floor of the house. Why the Honorable Governor of Tamil Nadu did not do this is highly intriguing and it is disturbing. In this particular situation, to avoid any other problem in the democratic process. We CPI(M) in consultation with other friendly parties, CPI and VCK, we have decided that within a hours' time, we will consult and take a view as a result of which this manufactured stalemate can be avoided and the overall verdict given by the people of Tamil Nadu can be respected. The single largest party should be able to form a government. What is required for that, these three parties are consulting and we will take a decision within few hours"

ANI

93,435 Aufrufe • vor 3 Monaten

There are two types of time: 1) Kronos "Kronos is more measurable. It's easy to calculate. You can depend on clocks, calendars, and schedules." This is the time most of us live by: It's chronological and linear. 2) Kairos "Kairos is deep time. If you're interested in the stories of nature, maybe the journey of a rock, you can't just measure it with that tiny element of time. You have to look at millennia. The time used by storytellers is more cyclical, close to the time of nature." Elif Shafak argues that if we had more words for time, we'd see how much of human history is a cycle, not a straight line.

There are two types of time: 1) Kronos "Kronos is more measurable. It's easy to calculate. You can depend on clocks, calendars, and schedules." This is the time most of us live by: It's chronological and linear. 2) Kairos "Kairos is deep time. If you're interested in the stories of nature, maybe the journey of a rock, you can't just measure it with that tiny element of time. You have to look at millennia. The time used by storytellers is more cyclical, close to the time of nature." Elif Shafak argues that if we had more words for time, we'd see how much of human history is a cycle, not a straight line.

David Perell Clips

19,882 Aufrufe • vor 3 Monaten

Canada is a country that is governed by the rule of law, and the protection of all citizens & the defence of our sovereignty are fundamental to our society. During this time, let us remain united and allow the justice system to proceed as it must.

Canada is a country that is governed by the rule of law, and the protection of all citizens & the defence of our sovereignty are fundamental to our society. During this time, let us remain united and allow the justice system to proceed as it must.

Anita Anand

47,624 Aufrufe • vor 2 Jahren

Heads up + Giveaway RT to win $100. The Fluid token is launching live within one hour (6pm UTC) This launch caught my eye as placing trades in crypto is less than user friendly right now. Fluid is linked directly to telegram so I can trade within seconds. A lot easier. Fluid also allows for crosschain swaps and bridging, which is notoriously a giant pain to find reliable methods for. Additionally, the launching marketcap is 1.3M. So that's a no brainer for me when the product is this solid. Check the video below for a demo on how it works. Follow them on x Fluid to get the contract address when it launches. Disclaimer: I certainly did get in on the presale, as this is a great idea.

Heads up + Giveaway RT to win $100. The Fluid token is launching live within one hour (6pm UTC) This launch caught my eye as placing trades in crypto is less than user friendly right now. Fluid is linked directly to telegram so I can trade within seconds. A lot easier. Fluid also allows for crosschain swaps and bridging, which is notoriously a giant pain to find reliable methods for. Additionally, the launching marketcap is 1.3M. So that's a no brainer for me when the product is this solid. Check the video below for a demo on how it works. Follow them on x Fluid to get the contract address when it launches. Disclaimer: I certainly did get in on the presale, as this is a great idea.

Jeff Kirdeikis

15,858 Aufrufe • vor 2 Jahren

Milestone! We (robotic arms for gadgets assembly) finished the first commercial order, which brought the first revenue. Here are some learnings from this: The customer was a smart toy manufacturer. The task was to add a heatsink to Raspberry Pi. We received parts from them and returned the assembled modules back. Currently, it's done by teleoperation. Later it will be done by a remote employee via the Internet. Then it will be automated action by action, reducing the operator's time on this and making the task profitable. ps. If you have an assembly task that we can do for you asynchronically - leave a comment below. Learning 1. It's possible! This task which is usually done by the human arm with 5 fingers can be done with a two-finger gripper with the addition of a couple of simple tooling. The task was not simplified. We peeled off thin films from stickers, unpacked paper boxes, moved PCB boards full of components, etc. And no unsolvable problems have been encountered yet. Challenges: 1) The paper box shifted during the opening Solved with the plastic walls that you can lean against 2) Heat pad, stuck to the gripper instead of heat sync. Can be solved by gripper with a pump, but this time solved with the patience of the operator 3) The film on the pad is very thin. Turned out that sub-millimeter arm precision is enough to peel it off with just a regular gripper. 4) The working area has not enough space. You'll only know this by doing real tasks in bulk. This could be solved by an extra pair of long arms, but in this case, solved with the patience of the operator. I think that in the end, we will have 5-10 types of universal tooling and 5-10 types of grippers to solve almost all the problems in such assembly tasks. Learning 2. It's slow. It took 5 times more time, than doing it with human hands. But the good news is there's a lot of room for improvement. We now have specific “time for task” metrics, which we will decrease with iterations. The main reasons for slowness: 1) To rotate the gripper to a steep angle you are forced to control one robot arm with two hands instead of using both arms. We can fix this by just making more room for rotations. 2) Grabbing PCB board with two arms is hard. A slight difference in rotation can break the board, and it's hard to control these angles visually. To solve this, the best way is to use force feedback so you can feel the pressure applied to the item. 3) Accuracy and steadiness is still can be improved We will try a metal version and double the motors to do this. 4) It is physically difficult for the human hands to move with such precision To solve this, we will add a pad for the hands like in surgical robots Learning 3. It's a good business model The "Factory in the cloud" is a good business model for this stage. You send us parts and we send back assembled modules. Currently, it's more convenient than sending a robot to your place, as we can iterate/fix the robot quickly and utilize it 100% of the time. When we polish the set-up over time - we can send robots to your place. So if we can assemble something for you in the USA with Chinese prices by using modern automation - leave a comment below.

Milestone! We (robotic arms for gadgets assembly) finished the first commercial order, which brought the first revenue. Here are some learnings from this: The customer was a smart toy manufacturer. The task was to add a heatsink to Raspberry Pi. We received parts from them and returned the assembled modules back. Currently, it's done by teleoperation. Later it will be done by a remote employee via the Internet. Then it will be automated action by action, reducing the operator's time on this and making the task profitable. ps. If you have an assembly task that we can do for you asynchronically - leave a comment below. Learning 1. It's possible! This task which is usually done by the human arm with 5 fingers can be done with a two-finger gripper with the addition of a couple of simple tooling. The task was not simplified. We peeled off thin films from stickers, unpacked paper boxes, moved PCB boards full of components, etc. And no unsolvable problems have been encountered yet. Challenges: 1) The paper box shifted during the opening Solved with the plastic walls that you can lean against 2) Heat pad, stuck to the gripper instead of heat sync. Can be solved by gripper with a pump, but this time solved with the patience of the operator 3) The film on the pad is very thin. Turned out that sub-millimeter arm precision is enough to peel it off with just a regular gripper. 4) The working area has not enough space. You'll only know this by doing real tasks in bulk. This could be solved by an extra pair of long arms, but in this case, solved with the patience of the operator. I think that in the end, we will have 5-10 types of universal tooling and 5-10 types of grippers to solve almost all the problems in such assembly tasks. Learning 2. It's slow. It took 5 times more time, than doing it with human hands. But the good news is there's a lot of room for improvement. We now have specific “time for task” metrics, which we will decrease with iterations. The main reasons for slowness: 1) To rotate the gripper to a steep angle you are forced to control one robot arm with two hands instead of using both arms. We can fix this by just making more room for rotations. 2) Grabbing PCB board with two arms is hard. A slight difference in rotation can break the board, and it's hard to control these angles visually. To solve this, the best way is to use force feedback so you can feel the pressure applied to the item. 3) Accuracy and steadiness is still can be improved We will try a metal version and double the motors to do this. 4) It is physically difficult for the human hands to move with such precision To solve this, we will add a pad for the hands like in surgical robots Learning 3. It's a good business model The "Factory in the cloud" is a good business model for this stage. You send us parts and we send back assembled modules. Currently, it's more convenient than sending a robot to your place, as we can iterate/fix the robot quickly and utilize it 100% of the time. When we polish the set-up over time - we can send robots to your place. So if we can assemble something for you in the USA with Chinese prices by using modern automation - leave a comment below.

Igor Kulakov

37,266 Aufrufe • vor 1 Jahr

Intrasubstance medial delamination extension of the supraspinatus tendon can be difficult to assess on US, MRI, and arthroscopy. “Water” (bursal or articular) is always an ally for exploration. We force the entry of bursal fluid towards the laminar delamination of the tendon, distending it slightly but enough to identify it. #mskad

Intrasubstance medial delamination extension of the supraspinatus tendon can be difficult to assess on US, MRI, and arthroscopy. “Water” (bursal or articular) is always an ally for exploration. We force the entry of bursal fluid towards the laminar delamination of the tendon, distending it slightly but enough to identify it. #mskad

Gonzalo Serrano-Belmar.

21,111 Aufrufe • vor 2 Jahren

MacFarlane: The politics of this are just terrible. It's a ballroom. You think of the monopoly man with the top hat and the monocle, or some type of use of taxpayer money that's not wise and judicious when we're all paying $6 for a box of cereal. This is not the time to be spending this type of money on a project that's called a ballroom.

MacFarlane: The politics of this are just terrible. It's a ballroom. You think of the monopoly man with the top hat and the monocle, or some type of use of taxpayer money that's not wise and judicious when we're all paying $6 for a box of cereal. This is not the time to be spending this type of money on a project that's called a ballroom.

Acyn

46,271 Aufrufe • vor 2 Monaten

The Black Sea & Eastern Mediterranean CFD-V1. State 1 to State 2 [1] over a nine-hour period (plus one hour of settling time). During the initial acceleration northwards, the water retreats to the south. Shortly after we move over the geographic north pole, the deceleration sets in, and centrifugal forcing is reversed by ±180° - the departed water returns, inundating much of Ukraine - home to considerable coal, gas, and marine sedimentary deposits. Orange markers are marine fossils. Blue/Pink markers are salt deposits. The water levels during the second phase of this simulation are lower than would be expected in reality. More than 50% of the fluid volume is lost over the Sahara to the south and leaves the simulation domain. Some of this volume would have returned during the deceleration, but is not accounted for here (this is therefore likely a conservative outcome for this scenario). A further >45% is lost to the north, leaving <5% of the original simulation domain volume. Depth, velocity, precursor- and primary-flows are visualised as follows: Depth: greyscale shading of the fluid volume. Whiter is deeper. Velocity: blue-white-red graded shading of the particle system. Precursor (thin) Flows: leading the main volume may be seen as little 'sparkles' at the head of the inundation. These provide clues as to incursion potential. Primary (heavy) Flows: white particle flows which provide a sense of volume distribution in the simulation. Pooling: Dark grey areas on land indicate pooled water. Please note that this is a physically informed visualisation of the primary (acceleration) and secondary (centrifugal) forcings only. Lunar tidal forcing is not accounted for, as it is temporally unpredictable, and of negligible effect by comparison to those under consideration. Possible overflows from the Arctic and North Sea are not modelled. Presented in 4K resolution with DEM (GEBCO bathymetry) and Google Satellite imagery. This is not a predictive safety indicator. It is a passable, evidence-supported approximation of flow direction and extent for the theorised rotation. I may iterate this solution one more time (each taking approximately a week) to improve the detail, but the agreement with existing geological, archaeological, and cultural accounts seems good at this point. [1]

The Black Sea & Eastern Mediterranean CFD-V1. State 1 to State 2 [1] over a nine-hour period (plus one hour of settling time). During the initial acceleration northwards, the water retreats to the south. Shortly after we move over the geographic north pole, the deceleration sets in, and centrifugal forcing is reversed by ±180° - the departed water returns, inundating much of Ukraine - home to considerable coal, gas, and marine sedimentary deposits. Orange markers are marine fossils. Blue/Pink markers are salt deposits. The water levels during the second phase of this simulation are lower than would be expected in reality. More than 50% of the fluid volume is lost over the Sahara to the south and leaves the simulation domain. Some of this volume would have returned during the deceleration, but is not accounted for here (this is therefore likely a conservative outcome for this scenario). A further >45% is lost to the north, leaving <5% of the original simulation domain volume. Depth, velocity, precursor- and primary-flows are visualised as follows: Depth: greyscale shading of the fluid volume. Whiter is deeper. Velocity: blue-white-red graded shading of the particle system. Precursor (thin) Flows: leading the main volume may be seen as little 'sparkles' at the head of the inundation. These provide clues as to incursion potential. Primary (heavy) Flows: white particle flows which provide a sense of volume distribution in the simulation. Pooling: Dark grey areas on land indicate pooled water. Please note that this is a physically informed visualisation of the primary (acceleration) and secondary (centrifugal) forcings only. Lunar tidal forcing is not accounted for, as it is temporally unpredictable, and of negligible effect by comparison to those under consideration. Possible overflows from the Arctic and North Sea are not modelled. Presented in 4K resolution with DEM (GEBCO bathymetry) and Google Satellite imagery. This is not a predictive safety indicator. It is a passable, evidence-supported approximation of flow direction and extent for the theorised rotation. I may iterate this solution one more time (each taking approximately a week) to improve the detail, but the agreement with existing geological, archaeological, and cultural accounts seems good at this point. [1]

Craig Stone

69,416 Aufrufe • vor 9 Monaten

This video shows a young child living with hydrocephalus, a serious medical condition in which cerebrospinal fluid (CSF) builds up inside the brain. This abnormal accumulation increases intracranial pressure, causing the head to enlarge and potentially leading to developmental delays, vision problems, seizures, and neurological damage if left untreated. The swelling seen is not due to bone growth, but to excess fluid compressing delicate brain tissue. Hydrocephalus can be congenital or acquired, and early diagnosis is critical for protecting brain function. The surgical procedure shown involves placing a shunt system, one of the most common and effective treatments. The shunt redirects excess CSF from the brain to another part of the body—usually the abdomen where it can be safely absorbed. This helps relieve pressure, prevent further damage, and give the child a chance at healthier development. While hydrocephalus is a lifelong condition that often requires ongoing monitoring, modern neurosurgery can be life-saving and life-changing, especially when treatment happens early.

This video shows a young child living with hydrocephalus, a serious medical condition in which cerebrospinal fluid (CSF) builds up inside the brain. This abnormal accumulation increases intracranial pressure, causing the head to enlarge and potentially leading to developmental delays, vision problems, seizures, and neurological damage if left untreated. The swelling seen is not due to bone growth, but to excess fluid compressing delicate brain tissue. Hydrocephalus can be congenital or acquired, and early diagnosis is critical for protecting brain function. The surgical procedure shown involves placing a shunt system, one of the most common and effective treatments. The shunt redirects excess CSF from the brain to another part of the body—usually the abdomen where it can be safely absorbed. This helps relieve pressure, prevent further damage, and give the child a chance at healthier development. While hydrocephalus is a lifelong condition that often requires ongoing monitoring, modern neurosurgery can be life-saving and life-changing, especially when treatment happens early.

Dr Honey choudhary 🩺

13,782 Aufrufe • vor 6 Monaten

You and I have a responsibility to ensure the Holy Ghost can always attest to the truth and authenticity of all we say and share. The promise for each of us is that we can learn to use technology appropriately with the guidance, protection, and warnings that come by the power of the Holy Ghost.

You and I have a responsibility to ensure the Holy Ghost can always attest to the truth and authenticity of all we say and share. The promise for each of us is that we can learn to use technology appropriately with the guidance, protection, and warnings that come by the power of the Holy Ghost.

David A. Bednar

50,875 Aufrufe • vor 1 Jahr