Spaceballs The X Account

A friend of mine just recently got his first gun, a striker fired Glock 19. He is terrified to leave a round chambered. To anyone reading this who has this same fear, I want to alleviate your concerns. I'm going to explain why there is nothing to be afraid of. First and foremost, I fully understand your concern. It's not irrational. And you're not stupid for being nervous about a bullet being aimed at your leg with the striker cocked back under spring tension about an 1/8 of an inch from the primer. I get it. I shared this concern when I was new to carrying. But your fear is due to a lack of understanding of the internal safety features of a modern striker fired handgun. On a properly maintained modern striker fired pistol the striker CANNOT hit the primer on the chambered round without the trigger being pulled. Can't. Not shouldn't. Can't. (If you have any good Sig P320 jokes, this is the proper place to share them) There is a block that the striker will hit and stop if it is released without the trigger being depressed. It works just like a lock and key. There is a channel in the blocker that the striker can pass through if it is in the fire position. It only goes into the fire position if the trigger is pulled which pushes the blocker into the fire position. A spring keeps the blocker firmly in the block position until then. The blocker is a solid piece of steel that won't break. And if your gun is securely in a hard sided Kydex holster nothing can move the trigger unless it is unholstered. Many guns like Glocks have a trigger safety that prevents the trigger from moving due to force of dropping. Your finger has to be on the trigger safety to move it. So the gun cannot fire unless you pull the trigger. And it's easy for you to test this safety feature to see how it works! See the video below. You can try to push the striker forward by moving that piece at the back of the slide forward. That piece is the back of the striker. Push it forward and it will stop. The tip won't come out through the breach. You see it trying to come through but it gets stuck. Now push that little button in. That is the actual blocker. When you push it in you will now be able to move the striker forward through the breach and see how it will strike the primer. You can test this easily every time you disassemble your pistol to verify it is still working. You can break this safety feature by removing the blocker or losing the spring. But if it's there it will work. (You would be the first person in firearms history who has ever lost a spring. Literally the first one. It has never happened before. 😐) But it doesn't come out as part of regular maintenance. You have to disassemble the firing assembly to get it out. That won't happen by accident. And if you do that on purpose you should do this blocker test when you reassemble it to make sure the safety feature is working. My video shows a Glock slide. All Glocks will look like this. Other brands may put the blocker in a different spot or it may be a slightly different shape. But they all (mostly) have the same design. If you test yours as demonstrated and it works like mine does, your gun WILL NOT fire without pulling the trigger. (If you just thought of another P320 joke, this is another good place to toss that out there)

186,036 次观看