Logistics is where dexterous hand manipulation gets tested for... real. Packages shift under the hand. Soft parcels deform during grasping. Contact changes with every manipulation. That is why warehouse sorting needs to be evaluated in simulation before real-world deployment. Lightwheel builds evaluation infrastructure to expose failures, measure performance, and close the loop from testing to deployment for industrial teams. #PhysicalAI #Robotics #Simulation #Evaluation #DexterousManipulation #LogisticsAutomationshow more

This is how Strike Robot turns Simulation into Reality!... One of the biggest challenges in robotics is ensuring that behaviors validated in simulation work reliably in the real world. For this experiment, we reconstructed part of a real laboratory at Eastworlds inside SR Platform. The generated layout was then deployed into MuJoCo. Using SR Agentic, the robot was tasked with finding abnormal objects in a cluttered environment and sending a Telegram notification when detected. Before deployment, everything is validated in simulation.show more

Excited to share a few presentations, demos, and workshop... talks from our group and collaborators at #ICRA2026! We will present recent work on real-to-sim-to-real robot policy evaluation, model-based planning with learned dynamics, and multi-modal manipulation. We will also have a joint live demo between SceniX and Analog Devices, Inc. on real-to-sim-to-real cable manipulation at the ICRA exhibition. This is a small teaser of what we have been building, with more to come soon! If you are at ICRA, please stop by the sessions or the demo booth. Happy to chat about robot learning, simulation, world models, and sim-to-real!show more

𝗘𝘃𝗲𝗿𝘆𝗼𝗻𝗲’𝘀 𝘁𝗮𝗹𝗸𝗶𝗻𝗴 𝗮𝗯𝗼𝘂𝘁 “𝗣𝗵𝘆𝘀𝗶𝗰𝗮𝗹 𝗔𝗜" - the idea that... we can simulate real-world environments so well that robots trained in simulation will work perfectly in reality. 𝗧𝗵𝗲 𝗽𝗿𝗼𝗺𝗶𝘀𝗲: Train in virtual worlds → deploy anywhere. 𝗧𝗵𝗲 𝗿𝗲𝗮𝗹𝗶𝘁𝘆: I’ve seen too many teams fall into this trap. After working with manipulation teams at Berkeley, Imperial, and Dyson, here’s the pattern: • 𝗪𝗲𝗲𝗸 𝟭: “Our policy works perfectly in simulation!” • 𝗪𝗲𝗲𝗸 𝟰: “Why doesn’t this work on real objects?” • 𝗠𝗼𝗻𝘁𝗵 𝟮: “We basically need to retrain from scratch with real data.” 𝗧𝗵𝗲 𝗴𝗮𝗽 𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀 𝗰𝗮𝗻’𝘁 𝗯𝗿𝗶𝗱𝗴𝗲: Unlike blind locomotion policies that can get away with sim-to-real transfer because they rely mainly on proprioception and contact forces, 𝘃𝗶𝘀𝗶𝗼𝗻-𝗴𝘂𝗶𝗱𝗲𝗱 𝗺𝗮𝗻𝗶𝗽𝘂𝗹𝗮𝘁𝗶𝗼𝗻 𝗶𝘀 𝗲𝘅𝘁𝗿𝗲𝗺𝗲𝗹𝘆 𝘀𝗲𝗻𝘀𝗶𝘁𝗶𝘃𝗲 𝘁𝗼 𝘃𝗶𝘀𝘂𝗮𝗹 𝗱𝗼𝗺𝗮𝗶𝗻 𝗴𝗮𝗽𝘀. • Real friction vs simulated surface textures • Manufacturing tolerances vs perfect CAD models • Dynamic lighting vs controlled virtual environments • Sensor noise vs instantaneous virtual readings 𝗛𝗲𝗿𝗲'𝘀 𝘄𝗵𝗮𝘁 𝗽𝗲𝗼𝗽𝗹𝗲 𝗱𝗼𝗻'𝘁 𝘁𝗮𝗹𝗸 𝗮𝗯𝗼𝘂𝘁: Building these detailed simulated environments takes forever. If it takes 7 days to build a simulated kitchen in simulation, wouldn't it be better to just collect real-world data in a real kitchen instead? 𝗗𝗼𝗻'𝘁 𝗴𝗲𝘁 𝗺𝗲 𝘄𝗿𝗼𝗻𝗴 - simulation is incredible for debugging, safety testing, and exploring edge cases. But it's not a magic solution to real-world deployment. 𝗪𝗵𝗮𝘁 𝗮𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝘄𝗼𝗿𝗸𝘀: Use simulation strategically while making real-world data collection as efficient and flexible as possible. This is why Neuracore focuses on streamlined real-world data infrastructure. Because no amount of virtual training can replace understanding how your robot actually behaves in actual environments. 𝗧𝗵𝗲 𝗽𝗵𝘆𝘀𝗶𝗰𝘀 𝗼𝗳 𝘆𝗼𝘂𝗿 𝗱𝗲𝗽𝗹𝗼𝘆𝗺𝗲𝗻𝘁 𝗲𝗻𝘃𝗶𝗿𝗼𝗻𝗺𝗲𝗻𝘁 𝗰𝗮𝗻'𝘁 𝗯𝗲 𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗲𝗱 𝗮𝘄𝗮𝘆. What’s been your experience with sim-to-real transfer?show more

Meet GAIA-3, Wayve’s most advanced generative world model yet.... 🌎 Scaling the evaluation of autonomous driving systems is one of the toughest challenges in our industry. Real-world testing matters, but it is slow, costly, and rarely captures the safety-critical events that matter most. And traditional simulation has not delivered the realism or diversity needed. GAIA 3 changes this. It reconstructs real environments with rich fidelity and generates realistic counterfactuals that unlock safe, repeatable, scalable evaluation for modern end-to-end driving systems. See how GAIA 3 advances Wayve toward global autonomy: #GAIA3 #EmbodiedAI #AISafety #GenerativeAI #AutonomousVehiclesshow more

Robora Sim: A PyBullet-Powered Environment for Learning Robotic Physical... Intelligence We are currently building our Robora simulation environment setup for our sim based learning, leveraging PyBullet, an industry-standard physics engine widely used in AI-driven robotics research and development. The environment is optimized with GPU-accelerated learning algorithms, enabling high-speed imitation learning and reinforcement learning within a safe and controlled virtual setup before shipping out to real world. This simulation platform allows our models to learn, adapt, and generalize across different robot morphologies, terrain types and task objectives - all before deployment to the real world. At it's core, the system combines a VLA-powered high-level planner with low-level motion control algorithms, working cohesively to produce emergent, physically intelligent behaviors. This synergy between simulation, learning, and real-world transfer marks a major step forward in our pursuit of adaptive and intelligent robotic systems. Through advanced domain randomization and synthetic data generation, the Robora Simulation Environment ensures that policies trained in simulation transfer effectively to real-world robots, minimizing the sim-to-real gap. Moreover, users will be able to test and integrate their own hardware kits within selected simulation environments in the Robora Dapp, ensuring seamless compatibility and safer real-world implementation.show more

GROK DOMINATES AI AT SCALE, REDEFINING WHAT’S POSSIBLE IN... REAL TIME Most AI models stall at the prototype phase. Grok advances beyond limits where others fail to perform. •⁠ ⁠Built for real-time decisioning across vast data landscapes •⁠ ⁠Optimized to process, synthesize, and respond with human-like fluidity •⁠ ⁠Deploys intelligence at the edge, not just in the cloud •⁠ ⁠Powers robotics, research, and infrastructure in live environments •⁠ ⁠Infrastructure built to evolve, not collapse, under scale Grok delivers high-performance AI built for deployment and real-world use. Source: xAI, Grok, Elon Muskshow more

𝗣𝗼𝗽𝘂𝗹𝗮𝗿 𝗼𝗽𝗶𝗻𝗶𝗼𝗻: "𝗝𝘂𝘀𝘁 𝗴𝗲𝗻𝗲𝗿𝗮𝘁𝗲 𝗺𝗼𝗿𝗲 𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗶𝗼𝗻 𝗱𝗮𝘁𝗮." After working... with many 𝗿𝗼𝗯𝗼𝘁 𝗺𝗮𝗻𝗶𝗽𝘂𝗹𝗮𝘁𝗶𝗼𝗻 teams who've fallen into the simulation trap, here's what I've learned: Simulation teaches your robot to be really, really good at simulation. Unlike blind locomotion policies that can get away with sim-to-real transfer because they rely mainly on proprioception and contact forces, 𝘃𝗶𝘀𝗶𝗼𝗻-𝗴𝘂𝗶𝗱𝗲𝗱 𝗺𝗮𝗻𝗶𝗽𝘂𝗹𝗮𝘁𝗶𝗼𝗻 𝗶𝘀 𝗲𝘅𝘁𝗿𝗲𝗺𝗲𝗹𝘆 𝘀𝗲𝗻𝘀𝗶𝘁𝗶𝘃𝗲 𝘁𝗼 𝘃𝗶𝘀𝘂𝗮𝗹 𝗱𝗼𝗺𝗮𝗶𝗻 𝗴𝗮𝗽. The subtle differences accumulate: - Simulated friction vs real surface textures - Perfect lighting vs shadows, reflections, glare - Ideal object geometries vs manufacturing tolerances - Instantaneous sensor readings vs real-world noise and latency - Clean backgrounds vs cluttered, dynamic environments 𝗧𝗵𝗲 𝗰𝗹𝗮𝘀𝘀𝗶𝗰 𝗽𝗿𝗼𝗴𝗿𝗲𝘀𝘀𝗶𝗼𝗻: Week 1: "Our model works perfectly in sim!" Week 2: "Let's collect some real data to fine-tune." Week 3: "The real data completely contradicts what the sim taught..." Week 4: "Okay, let's collect way more real data." Month 2: "We basically need to retrain from scratch." 𝗧𝗵𝗲 𝗽𝗮𝗶𝗻𝗳𝘂𝗹 𝘁𝗿𝘂𝘁𝗵: There's no shortcut to real-world data collection for vision-based manipulation. Simulation is amazing for debugging, prototyping, safety testing, and of course to supplement your real data. But it's not a substitute for understanding how your robot actually behaves in the actual environment. 𝗪𝗵𝗮𝘁 𝘄𝗼𝗿𝗸𝘀: Use simulation strategically - for exploring edge cases, testing safety boundaries, and rapid iteration. But build your production models on real data from real environments. The teams that succeed treat simulation as a powerful tool, not a magic solution. This is why Neuracore focuses on making real-world data collection so much easier and faster. Because the physics of your actual environment can't be simulated away. 𝗪𝗼𝗿𝗹𝗱 𝗺𝗼𝗱𝗲𝗹𝘀, 𝘆𝗼𝘂 𝘀𝗮𝘆? 𝗪𝗲𝗹𝗹, 𝗽𝗲𝗿𝗵𝗮𝗽𝘀 𝗺𝗼𝗿𝗲 𝗼𝗻 𝘁𝗵𝗮𝘁 𝗶𝗻 𝗮𝗻𝗼𝘁𝗵𝗲𝗿 𝗽𝗼𝘀𝘁! 𝗪𝗵𝗮𝘁'𝘀 𝗯𝗲𝗲𝗻 𝘆𝗼𝘂𝗿 𝗲𝘅𝗽𝗲𝗿𝗶𝗲𝗻𝗰𝗲 𝘄𝗶𝘁𝗵 𝘀𝗶𝗺-𝘁𝗼-𝗿𝗲𝗮𝗹 𝘁𝗿𝗮𝗻𝘀𝗳𝗲𝗿? 𝗛𝗮𝘀 𝗶𝘁 𝘄𝗼𝗿𝗸𝗲𝗱 𝗮𝘀 𝘄𝗲𝗹𝗹 𝗮𝘀 𝗲𝘅𝗽𝗲𝗰𝘁𝗲𝗱?show more

What if you could turn a single 360° photo... into a production-ready Isaac Sim environment in minutes? That's exactly what we did here. Using World Labs' Marble and an Insta360 X5 capture (rotating on top), we generated a complete navigable 3D environment and populated it with Lightwheel Sim Ready assets (bottom view). The result? A fully interactive scene in Isaac Sim, ready for sim2real testing,. Navigation, manipulation, or any robotics task you need to validate. What used to take weeks of manual 3D modeling and asset placement now takes minutes. Capture once in the real world, simulate everywhere in your training pipeline. This is the future of robotics development with world models. NVIDIA Robotics NVIDIA Omniverse #Sim2Real #Robotics #Simulationshow more

Building robots that can effectively operate alongside human workers... is difficult. 🛠️ Advances in open-source physics, open foundation models, and frameworks are helping accelerate physical #AI deployment. ✔️ Newton Physics Engine, an open-source GPU-powered simulation built on OpenUSD, speeds up robot learning for advanced manipulation and mobility. ✔️ NVIDIA Cosmos Reason, an open reasoning vision language model, gives robots the ability to think like humans using prior knowledge, common sense and physics ✔️NVIDIA Isaac GR00T N1.6, an open robot foundation model, enables humanoids to understand ambiguous instructions Leading robotics developers including Agility Robotics, Lightwheel, Mentee Robotics, UniversalRobots, and Wandelbots are adopting simulation technologies and libraries to accelerate physical AI development and deployment. Omniverse Ambassador Dylan Tobin built an AI chatbot trained on Isaac Sim workflows, helping devs navigate Omniverse faster. Read the full blog 👉show more

Most humanoid projects talk about real work. Very few... last an hour on a real line. This week I saw a case that matters for anyone building robots, perception, or physical AI. Kinisi deployed its first mobile manipulation system into a live recycling facility. Not a demo. Not a staged test. A real production line with real output pressure. Why this matters if you want robotics to deliver real value on your floor: • Handles mixed glass with random poses and no fixed fixtures. • Runs real grasp selection under noise, vibration and production variability. • Maintains throughput while avoiding breakage on a delicate material. • Shows mobile manipulation doing actual shift work instead of controlled lab runs. Kinisi published a video that shows what the robot sees and how sensor data turns into action. This is the part most teams struggle to explain to customers, so the educational angle is useful for anyone working on adoption. On top of this, the team signed a pilot with a global automotive manufacturer to explore humanoid use cases in production. The direction is clear. Wheeled mobility (not legs!) plus strong perception seems to be shaping a large part of industrial humanoids right now. I know Brennand from earlier conversations and from our podcast session, and I am always glad to see European teams push the category forward. Wishing the Kinisi team continued success. —- Weekly robotics and AI insights. Subscribe free:show more

Pi Ventures Joins Hack VC To Back AI Robotics... Startup On Base Axis Robotics (Axis Robotics) has raised a $12 million seed round led by Hack VC, with participation from Pi Network (Pi Network) Ventures, Nomad Capital, 10K Ventures, and other angel investors. The company is building a data engine for Physical AI that combines simulation, real world data capture, and human feedback to generate scalable robotics datasets. Axis said the funding will accelerate development of its global human in the loop data engine. Base (Base APAC) congratulated the team, calling Axis one of the leading scalable Physical AI and robotics platforms building on the network.show more

Furniture assembly is the task everyone name-drops and nobody... actually attempts at real scale. Every demo I have seen is a scaled down IKEA leg or a single arm on a toy chair. This paper does it properly, real scale, bimanual, up to 7 subtasks and 1,550 control steps per episode, and it is validated on a real Kinova Gen3, not just in sim. That real-robot number is the one that matters: only a 16 percent drop on the hardest task going from simulation to hardware. That is a small enough gap to take seriously, and it did not happen by accident. They built a VR teleoperation rig specifically for coordinated dual-arm collection, because generic single-arm teleop setups do not capture the coordination real assembly needs, and the model predicts a continuous progress signal alongside the action chunk rather than a discrete subtask label, letting it auto-transition and catch drift before it compounds into total failure. The simulation ablation is what got them there, 48 to 80 percent over baselines, with another 21 points from their perception and control design study alone, but that is groundwork, not the headline. Watch the video, there is a clip of the robot misgrasping the seat panel, reopening the gripper, and regrasping on its own. That is not scripted recovery behaviour, it emerged from training, and it emerged on hardware. Excellent work from the team from Mitsubishi Electric Research Laboratories, with Oxford and UNC Chapel Hill Clinical Laboratory Science. Video and project page in comments. #Robotics #Manipulation #VLAshow more

A Letter to Our Community: The Road Ahead for... Robotics To our Community and Partners, As we step into 2026, our mission at Axis is clearer than ever: Constructing the definitive End-to-End Scaling Layer for Robotics. Our goal is to accelerate the transfer of diverse human intelligence into Robotics General Intelligence (RGI). By owning the critical path of intelligence creation, we are turning the physical limitations of robotics into a scalable, software-driven future. Here is our strategic outlook and roadmap for the year ahead. The Core Thesis: Simulation is the Only Way Out The path to RGI is currently blocked by Data Scarcity, Generalization Fragility, and Hardware Fragmentation. At Axis, we believe Simulation is the only way out. Our Simulation Data Platform and Data Augmentation Engine transform raw data into "Synthetic Gold". Backed by academic milestones like Roboverse, Skill Blending, and GraspVLA, we have proven that pure simulation can achieve the generalization required for the real world. We don’t just collect data; we architect it. The Engine: Why Crypto? We believe RGI should come from all, not a few. Crypto is not just a feature; it is the primitive that powers our entire ecosystem flywheel: - Incentive Mechanism: Democratizing contribution and rewarding the trainers and developers. - Assetization: Turning proprietary data and refined models into liquid, ownable assets. - Verifiable Workflow: We are opening the "Black Box" of AI. By bringing total transparency to the Task Generation → Data Collection → Model Training pipeline, we ensure every byte of intelligence is verifiable, traceable, and secure. 2026 Strategic Deliverables This year, we are committed to delivering three foundational pillars: - The World's Largest Training Dataset for Robots: A robot training set—diverse, high-quality interaction data at an unprecedented scale. - A Robotics Foundation Model: A universal robotic brain trained on our pure simulation and synthetic data, capable of robust cross-embodiment transfer and open-world adaptability. - Evolvable Robot Hardware: Robots deployed with Axis models that autonomously evolve through continuous interaction, turning every deployment into a self-improving node within our RGI network. The Ultimate Vision We are building more than models; we are architecting the Distributed Machine Economy. A future where every dataset, model, and robotic embodiment is a verifiable asset in a global, autonomous network. Thank you for building the future of intelligence with us✌️📷show more

OpenAI's AgentKit will be so insane, build every step... of agents on one platform. These visual agent builders make the whole process of iterating and launching agents far more efficient. It sits on top of the Responses API and unifies the tools that were previously scattered across SDKs and custom orchestration. It lets developers create agent workflows visually, connect data sources securely, and measure performance automatically without coding every layer by hand. The core of AgentKit is the Agent Builder, a drag-and-drop canvas where each node represents an action, guardrail, or decision branch. Developers can link these nodes into multi-agent workflows, preview results instantly, and version each setup. It supports inline evaluation so that developers can see how changes affect output before deploying. The Connector Registry is a single admin panel that manages how data and tools connect across the OpenAI ecosystem. It centralizes integrations like Google Drive, SharePoint, Dropbox, and Microsoft Teams. Large organizations can govern access and flow of data between agents securely under one global console. ChatKit provides a ready-to-use chat interface for embedding agents inside apps or websites. It manages streaming, message threads, and model reasoning displays automatically. Developers can skin the interface to match their product without writing custom front-end code. Under the hood, all these blocks use the same execution core that runs agent reasoning through OpenAI’s APIs. Workflows in Agent Builder compile down to structured instructions for the Responses API, which handles model calls, tool use, and context passing. Connector Registry handles authentication and routing for external tools, while Evals and RFT provide feedback loops that improve agents over time. This integration means developers no longer need to handle orchestration logic, model evaluation pipelines, or safety layers separately. Everything runs natively within OpenAI’s control plane with managed security, automatic versioning, and built-in testing. In short, AgentKit standardizes the entire life cycle of an AI agent—from visual design to deployment and performance tuning—inside a single unified system.show more

THE TOURIST WALLET IS CHANGING Travelers are moving differently.... They no longer want to manage cash, FX counters, local payment apps, and hidden conversion fees just to pay abroad. The next travel wallet needs to be borderless, mobile-first, and easy to use across countries. One wallet. Multiple destinations. Real-world payments that feel familiar. For crypto to become part of travel, it has to work where people actually spend: hotels, cafes, retail stores, transport, events, and everyday experiences. That is where PayWithCrypto comes in. Built for real life. Made for payments that travel with you.show more

𝗥𝗼𝗯𝗼𝘁𝘀 𝗱𝗼𝗻’𝘁 𝗻𝗲𝗲𝗱 𝗺𝗼𝗿𝗲 𝗱𝗲𝗺𝗼𝗻𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻𝘀. 𝗧𝗵𝗲𝘆 𝗻𝗲𝗲𝗱 𝘁𝗼 𝗹𝗲𝗮𝗿𝗻... 𝗳𝗿𝗼𝗺 𝗳𝗮𝗶𝗹𝘂𝗿𝗲 — 𝗮𝗳𝘁𝗲𝗿 𝘄𝗮𝘁𝗰𝗵𝗶𝗻𝗴 𝗵𝘂𝗺𝗮𝗻𝘀. Most robot learning systems assume failure is the end of learning. In our new work, we study whether robots can improve after deployment by learning from their own failures, without any human intervention, teleoperation, or corrective labels. The key idea is simple: human videos contain structure about how the world works. We use them to learn cross-embodiment representations of action, dynamics, and value, enabling a shared predictive space between human behavior and robot experience. This allows a new learning loop: 👉 pretrain on human videos 👉 deploy robot policy 👉 observe failures 👉 reinterpret failures using human priors 👉 improve autonomously We evaluate this across 7 real-world manipulation tasks, showing: 📈 40% → 81% success rate 🏆 Strong improvements over π0.6 RECAP and RISE ✔️ Zero human intervention during post-deployment improvement 🧬 Generalizes across robot embodiments and policy backbones A key finding is that explicit failure repair significantly outperforms failure reweighting, yielding substantially larger gains under identical data conditions (+25 pts vs +5 pts on the same π0.5 base policy). Overall, the results suggest a shift in how we think about robot learning: Human videos are not only for pretraining policies. They can provide the structure needed for continual self-improvement after deployment. 📄 Paper: 🌐 Project: I am grateful for working with the fantastic leads Hanzhi Chen and Anran Zhang, and our collaborators Simon Schaefer, Kejia Chen, Shi Chen, Daniel Cremers. Special thanks to Stefan Leutenegger for co-advising this project with me. ETH Zürich TU München Microsoft Check out Hanzhi's 🧵 for more detailsshow more

🚨 BREAKING: NVIDIA just announced the Isaac GR00T Reference... Humanoid Robot. The first fully open humanoid robot reference design built on Jetson Thor, and it's going straight to the world's top research institutions. This is Jensen Huang's bet on open physical AI infrastructure. The hardware stack is serious: → Unitree H2 Plus chassis, 6 feet tall, 150 pounds, 31 degrees of freedom → Sharpa Wave tactile five-finger hands, 22 degrees of freedom, bringing total to 75 across the full body → NVIDIA Jetson AGX Thor onboard compute, 2,070 FP4 teraflops of AI performance, 128GB unified memory → Multi-view sensing, stereo head camera, wrist cameras, IMU Alongside this announcement, Unitree also introduced the H2 Plus as a standalone product, a frontier humanoid combining Unitree's own body, Sharpa's five-finger hands and NVIDIA Robotics Jetson Thor compute into one fully integrated research platform. The full Isaac GR00T software stack ships with it, teleoperation for data capture, open foundation models, Isaac Sim for training, Isaac Lab for evaluation, and accelerated ROS middleware for deployment. The complete loop from data to real-world robot in one unified platform. ETH Zürich, Stanford Robotics Center, UC San Diego and Ai2 are already on board as launch research partners. NVIDIA Robotics did to AI what it's now doing to robotics, build the platform, open the ecosystem, let the world build on top of it. Whoever owns the infrastructure layer wins. NVIDIA knows this better than anyone. 👀 Read more here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →show more

Messiah Partners with IoTeX to Power Next-Gen Node Infrastructure... Messiah is proud to team up with IoTeX , a leading force in connecting the real world to Web3. Together, we’re bringing IoTeX’s infrastructure to NodeHub, making it easier than ever for the community to run and earn from nodes. We’re also excited to share that Messiah is now live on DepinScan , further solidifying our position in the decentralized infrastructure space. Explore our listing here: What’s next? IoTeX RPC Nodes on NodeHub: Deploying an IoTeX RPC Node will soon be as simple as a few clicks. Whether you’re bootstrapping a full node or configuring a gateway, NodeHub will handle the complexity so you can focus on building and transacting. Delegate Node Support: For those looking to play a bigger role in IoTeX’s governance and consensus, NodeHub will also support Delegate Node deployment. This partnership isn’t just about infrastructure, it’s about empowering builders, validators, and stakers to contribute to the growth of the IoTeX ecosystem with ease and security. The future of decentralized infrastructure is simple, powerful, and community-driven. With IoTeX on NodeHub, that future is closer than ever.show more