Loading video...

Video Failed to Load

Go Home

A creative and educational project! Here's a step-by-step guide to make a hydraulic crane machine from cardboard using a syringe: Materials Needed - Cardboard (for base, crane arm, and other components) - Syringe (10-20 ml) - Water - Scissors - Glue or hot glue gun - Ruler or straightedge...

expert_hands's profile picture

Expert hands

18,600 subscribers

538,900 views • 1 year ago •via TikTok

Education#diy#stem#cardboardcrafts
LIVE

Anya Rossi• Live Now

Private livecam show

0 Comments

No comments available

Comments from the original post will appear here

Related Videos

Abuelas White Guanimes 🇵🇷 Ingredients : 3 cups all-purpose flour 1/2 cup & 1/4 cup warm water (not hot) 1/2 tablespoons Salt 1 to 2 tablespoon vegetable oil or olive oil Usual sides are : Habichuelas guisadas Bacalao Guisado Instructions Step 1. Bring a pot of salted water to a boil. Step 2. While the water is heating, place the flour in a large bowl and make a well in the center. Step 3. Add the warm water slowly, salt, and oil. Step 4. Mix everything together by hand or a plastic spatula while adding water as the process moves along and formed into a smooth ball of dough. Step 5. Divide or pick the dough into small portions and roll each one into a ball. Step 6. Roll each ball on a flat surface or by hand to form an elongated log shape not to thick and not to thin. Step 7. Carefully place the guanimes into the boiling salted water, olive oil to help them not stick. Step 8. Cook for 30 to 35 minutes on high, or simply until fully cooked. Serve with bacalao Guisado or Habichuelas guisadas or desired sides. Tip: Feel free to adjust the ingredient quantities to suit your preference or make a larger or smaller batch. #puertoricanfood #puertoricoeats #easytomake #puertorico #comidapuertorriqueña
1:15

Abuelas White Guanimes 🇵🇷 Ingredients : 3 cups all-purpose flour 1/2 cup & 1/4 cup warm water (not hot) 1/2 tablespoons Salt 1 to 2 tablespoon vegetable oil or olive oil Usual sides are : Habichuelas guisadas Bacalao Guisado Instructions Step 1. Bring a pot of salted water to a boil. Step 2. While the water is heating, place the flour in a large bowl and make a well in the center. Step 3. Add the warm water slowly, salt, and oil. Step 4. Mix everything together by hand or a plastic spatula while adding water as the process moves along and formed into a smooth ball of dough. Step 5. Divide or pick the dough into small portions and roll each one into a ball. Step 6. Roll each ball on a flat surface or by hand to form an elongated log shape not to thick and not to thin. Step 7. Carefully place the guanimes into the boiling salted water, olive oil to help them not stick. Step 8. Cook for 30 to 35 minutes on high, or simply until fully cooked. Serve with bacalao Guisado or Habichuelas guisadas or desired sides. Tip: Feel free to adjust the ingredient quantities to suit your preference or make a larger or smaller batch. #puertoricanfood #puertoricoeats #easytomake #puertorico #comidapuertorriqueña

chefedgardojose

80,000 views • 4 months ago

A machine that builds itself. Or how a crane is assembled using the same crane.
1:00

A machine that builds itself. Or how a crane is assembled using the same crane.

Massimo

572,741 views • 11 months ago

A machine that builds itself. Or how a crane is assembled using the same crane.
1:00

A machine that builds itself. Or how a crane is assembled using the same crane.

Massimo

136,251 views • 1 month ago

This is Clone Robotics realistic humanoid robotic arm, designed to closely mimic the movement and anatomy of a human arm. It is powered by electricity and a water-based hydraulic system using a compact pump about the size of a human heart. Despite weighing only 1 kilogram, the robotic arm can lift a 7-kilogram dumbbell.
0:24

This is Clone Robotics realistic humanoid robotic arm, designed to closely mimic the movement and anatomy of a human arm. It is powered by electricity and a water-based hydraulic system using a compact pump about the size of a human heart. Despite weighing only 1 kilogram, the robotic arm can lift a 7-kilogram dumbbell.

Space and Technology

58,940 views • 4 months ago

ALERT: Florida woman throws her car into reverse and barely survives a massive crane that fell onto the front of her car and sent 4 to the hospital. An 85-foot-tall drilling crane collapsed in Miami and crushed multiple vehicles and a construction container. City of Miami Fire-Rescue Chief Robert Hevia held a news conference about the collapsed crane and said, "Because, you know, to be able to see the crane falling, pull the car in reverse, and pop out of the back while the car was on fire is really incredible. Today is a new birthday for her." The building the crane was being used to help construct is the new global headquarters for the hedge fund Citadel, owned by billionaire Ken Griffin.
2:21

ALERT: Florida woman throws her car into reverse and barely survives a massive crane that fell onto the front of her car and sent 4 to the hospital. An 85-foot-tall drilling crane collapsed in Miami and crushed multiple vehicles and a construction container. City of Miami Fire-Rescue Chief Robert Hevia held a news conference about the collapsed crane and said, "Because, you know, to be able to see the crane falling, pull the car in reverse, and pop out of the back while the car was on fire is really incredible. Today is a new birthday for her." The building the crane was being used to help construct is the new global headquarters for the hedge fund Citadel, owned by billionaire Ken Griffin.

E X X ➠A L E R T S

75,399 views • 1 month ago

Mathematics and witchcraft. Our strange universe. We can remove a handle of a double torus from a rod without cutting or pinching the surface. By Keenan Crane et al, Keenan Crane, Source: Used with permission
0:27

Mathematics and witchcraft. Our strange universe. We can remove a handle of a double torus from a rod without cutting or pinching the surface. By Keenan Crane et al, Keenan Crane, Source: Used with permission

Cliff Pickover

63,048 views • 2 years ago

Replying to @yourgirl.kenzz #math MODULO ART ~ How to make modulo art ✨ Using mod 4 just means we’ll work with numbers 0, 1, 2, and 3. Here’s the step-by-step guide process adapted for mod 4: 1. Draw Your Grid Make a grid on paper, like 4x4. 2. Add Row and Column Numbers For each box, add the row number and column number together. 3. Apply Mod 4 For each result, divide by 4 and write down the remainder (this will be 0, 1, 2, or 3). 4. Create the Reflection pattern To reflect your grid, either: Flip it horizontally (mirror it side-to-side). Flip it vertically (mirror it top-to-bottom). Copy the numbers to make a matching, reflected grid. 5. Color the Grid Pick four colors or designs of your choice, one for each box/number (0, 1, 2, and 3) like in the legend. Fill in each box with the color or design that matches its number. Now you should see a beautiful, repeating pattern with your mod 4 reflection 😉
1:58

Replying to @yourgirl.kenzz #math MODULO ART ~ How to make modulo art ✨ Using mod 4 just means we’ll work with numbers 0, 1, 2, and 3. Here’s the step-by-step guide process adapted for mod 4: 1. Draw Your Grid Make a grid on paper, like 4x4. 2. Add Row and Column Numbers For each box, add the row number and column number together. 3. Apply Mod 4 For each result, divide by 4 and write down the remainder (this will be 0, 1, 2, or 3). 4. Create the Reflection pattern To reflect your grid, either: Flip it horizontally (mirror it side-to-side). Flip it vertically (mirror it top-to-bottom). Copy the numbers to make a matching, reflected grid. 5. Color the Grid Pick four colors or designs of your choice, one for each box/number (0, 1, 2, and 3) like in the legend. Fill in each box with the color or design that matches its number. Now you should see a beautiful, repeating pattern with your mod 4 reflection 😉

Gwynn

326,100 views • 2 years ago

Step-by-Step Instructions for Building a DIY Cat Tree House: Prepare the Pallets: Start by disassembling the pallets if necessary. Use a saw to cut the pallets into the desired sizes and shapes for your tree house. Sand all surfaces thoroughly to remove any rough edges or splinters that could harm your cat. Build the Base: The base of the tree house should be wide and stable to prevent tipping. Use a large pallet or combine smaller ones to create a solid foundation. Secure the pieces together with screws or nails, and reinforce the joints with wood glue for added stability. Create Platforms and Levels: Depending on your design, you may want to add multiple levels to the tree house. Use pallet pieces to create platforms at different heights, ensuring each one is securely attached to the structure. Consider adding ramps or ladders between levels to make it easier for your cat to navigate. Add Enclosed Spaces: Cats love cozy, enclosed spaces where they can hide and feel safe. Use pallet pieces to create small cubbies or boxes within the tree house. You can cover these spaces with carpet or felt to make them more comfortable. Incorporate Scratching Posts: To satisfy your cat’s natural scratching instincts, add scratching posts to the tree house. Wrap sisal rope around wooden posts or attach pre-made scratching posts to the structure. Place them in areas where your cat is likely to scratch, such as near the entrances to enclosed spaces. Cover Surfaces: Cover the platforms and other surfaces with carpet remnants or felt to provide a soft and comfortable surface for your cat to walk and lounge on. Use a staple gun to secure the fabric in place, making sure there are no loose edges that your cat could chew on. Add Toys and Accessories: To make the tree house more engaging, consider adding hanging toys, a hammock, or even a small perch with a view of the room. These additions will encourage your cat to explore and play on the tree house. Secure the Structure: Once the tree house is assembled, double-check all connections to ensure the structure is stable and secure. Test each platform and level to make sure they can support your cat’s weight without wobbling or tipping. Make sure to use pet safe, non toxic glue, paint and materials! Purrr-fect!
0:25

Step-by-Step Instructions for Building a DIY Cat Tree House: Prepare the Pallets: Start by disassembling the pallets if necessary. Use a saw to cut the pallets into the desired sizes and shapes for your tree house. Sand all surfaces thoroughly to remove any rough edges or splinters that could harm your cat. Build the Base: The base of the tree house should be wide and stable to prevent tipping. Use a large pallet or combine smaller ones to create a solid foundation. Secure the pieces together with screws or nails, and reinforce the joints with wood glue for added stability. Create Platforms and Levels: Depending on your design, you may want to add multiple levels to the tree house. Use pallet pieces to create platforms at different heights, ensuring each one is securely attached to the structure. Consider adding ramps or ladders between levels to make it easier for your cat to navigate. Add Enclosed Spaces: Cats love cozy, enclosed spaces where they can hide and feel safe. Use pallet pieces to create small cubbies or boxes within the tree house. You can cover these spaces with carpet or felt to make them more comfortable. Incorporate Scratching Posts: To satisfy your cat’s natural scratching instincts, add scratching posts to the tree house. Wrap sisal rope around wooden posts or attach pre-made scratching posts to the structure. Place them in areas where your cat is likely to scratch, such as near the entrances to enclosed spaces. Cover Surfaces: Cover the platforms and other surfaces with carpet remnants or felt to provide a soft and comfortable surface for your cat to walk and lounge on. Use a staple gun to secure the fabric in place, making sure there are no loose edges that your cat could chew on. Add Toys and Accessories: To make the tree house more engaging, consider adding hanging toys, a hammock, or even a small perch with a view of the room. These additions will encourage your cat to explore and play on the tree house. Secure the Structure: Once the tree house is assembled, double-check all connections to ensure the structure is stable and secure. Test each platform and level to make sure they can support your cat’s weight without wobbling or tipping. Make sure to use pet safe, non toxic glue, paint and materials! Purrr-fect!

Sarah.love1y🕊

1,700,000 views • 1 year ago

I believe in a future where we’re not held hostage by catastrophic threats. It’s up to us to create it, and today you can take the first step with people around the world by folding and sharing a paper crane. Please join me! #CranesForOurFuture
1:16

I believe in a future where we’re not held hostage by catastrophic threats. It’s up to us to create it, and today you can take the first step with people around the world by folding and sharing a paper crane. Please join me! #CranesForOurFuture

Yoko Ono

88,976 views • 3 years ago

Step 1: Heat the Cream 1. Pour the heavy cream into a saucepan. 2. Heat it over medium-low heat until it reaches 85°C to 90°C (185°F to 194°F). – Stir often to prevent scorching. – If you don’t have a thermometer: Heat until you see tiny bubbles at the edges, but do not boil. Step 2: Add Acid 1. Once heated, reduce the heat to low and add the lemon juice. 2. Stir gently for about 3–5 minutes. – The cream will slightly thicken, but it won’t curdle like other cheeses. Step 3: Cool and Strain 1. Remove from heat and let it cool for 15–20 minutes. 2. Line a sieve or strainer with cheesecloth or a clean, thin kitchen towel. Step 4: Drain 1. Cover and refrigerate the whole setup for 8–12 hours or overnight. 2. After draining, transfer the mascarpone to a container. – It should be thick, creamy, and spreadable. #fypシ゚ #tiramisu #mascarpone #homemade #cake
0:36

Step 1: Heat the Cream 1. Pour the heavy cream into a saucepan. 2. Heat it over medium-low heat until it reaches 85°C to 90°C (185°F to 194°F). – Stir often to prevent scorching. – If you don’t have a thermometer: Heat until you see tiny bubbles at the edges, but do not boil. Step 2: Add Acid 1. Once heated, reduce the heat to low and add the lemon juice. 2. Stir gently for about 3–5 minutes. – The cream will slightly thicken, but it won’t curdle like other cheeses. Step 3: Cool and Strain 1. Remove from heat and let it cool for 15–20 minutes. 2. Line a sieve or strainer with cheesecloth or a clean, thin kitchen towel. Step 4: Drain 1. Cover and refrigerate the whole setup for 8–12 hours or overnight. 2. After draining, transfer the mascarpone to a container. – It should be thick, creamy, and spreadable. #fypシ゚ #tiramisu #mascarpone #homemade #cake

Mika@AlleyCafe

71,100 views • 1 year ago

Fish Cake Udon Soup is easy to make and so comforting, especially during chilly weather. Gochugaru and chili peppers are added for a kick, but feel free to omit for a milder version. Skewered fish cakes are available in the frozen section at Asian markets. Or you can buy the fish cake sheets and slice them to add without skewers. Fish Cake Udon Soup Ingredients 7-8 cups water plus broth coin or powder (or use any broth) 2 Tablespoons soy sauce 2 garlic cloves, minced 2 servings frozen udon (or regular) 5-6 fish cakes, sliced (skewered is optional) Optional garnish: green onions Seasoning (adjust as needed) Optional: 1 Tablespoon gochugaru 1 Tablespoon sugar 4 Tablespoons soy sauce 1-2 Tablespoons sesame oil Black pepper to taste Optional: 1 chili pepper, sliced 1 green onion, sliced 1 garlic clove, minced or grated Directions If using frozen udon noodles, soak them in cold water. In a small bowl, mix together the seasoning ingredients. Rinse the fish cake in hot water to remove the excess oil coating. Then, slice the fish cake sheets into strips (or use skewered). In a pot, add any broth (or water with broth coin or powder) and bring to a boil. Then, reduce the heat and add garlic and soy sauce. Rinse and drain the udon, then add to the pot. Add the fish cakes and simmer for about 10 minutes or until the fish cakes are soft. Spoon half of the seasoning into the broth and garnish with green onions. Add the remaining seasoning to the soup to taste or use it as a dipping sauce for the skewers. . . . . #soupseason #soup #comfortfood #easyrecipe
0:36

Fish Cake Udon Soup is easy to make and so comforting, especially during chilly weather. Gochugaru and chili peppers are added for a kick, but feel free to omit for a milder version. Skewered fish cakes are available in the frozen section at Asian markets. Or you can buy the fish cake sheets and slice them to add without skewers. Fish Cake Udon Soup Ingredients 7-8 cups water plus broth coin or powder (or use any broth) 2 Tablespoons soy sauce 2 garlic cloves, minced 2 servings frozen udon (or regular) 5-6 fish cakes, sliced (skewered is optional) Optional garnish: green onions Seasoning (adjust as needed) Optional: 1 Tablespoon gochugaru 1 Tablespoon sugar 4 Tablespoons soy sauce 1-2 Tablespoons sesame oil Black pepper to taste Optional: 1 chili pepper, sliced 1 green onion, sliced 1 garlic clove, minced or grated Directions If using frozen udon noodles, soak them in cold water. In a small bowl, mix together the seasoning ingredients. Rinse the fish cake in hot water to remove the excess oil coating. Then, slice the fish cake sheets into strips (or use skewered). In a pot, add any broth (or water with broth coin or powder) and bring to a boil. Then, reduce the heat and add garlic and soy sauce. Rinse and drain the udon, then add to the pot. Add the fish cakes and simmer for about 10 minutes or until the fish cakes are soft. Spoon half of the seasoning into the broth and garnish with green onions. Add the remaining seasoning to the soup to taste or use it as a dipping sauce for the skewers. . . . . #soupseason #soup #comfortfood #easyrecipe

MJ | Love Korean Food

21,200 views • 1 year ago

Socialist Republicans in Derry, including members of Lasair Dhearg, have scaled a crane to highlight the plight of #Palestine and show our support. A massive Palestinian flag now hangs from the crane, with flares to draw attention across the night sky, as the PSNI closes roads.
0:57

Socialist Republicans in Derry, including members of Lasair Dhearg, have scaled a crane to highlight the plight of #Palestine and show our support. A massive Palestinian flag now hangs from the crane, with flares to draw attention across the night sky, as the PSNI closes roads.

Lasair Dhearg

70,125 views • 2 years ago

footage shows the moments a crane collapsed at a construction site near One Plaza in Brickell after the crane's arm snapped. Miami Fire Rescue and Miami Police responded to the scene at 1818 SW 1st Ave. after receiving reports of a possible structure collapse. According to Miami Fire Rescue PIO Lt. Pete Sanchez, no one was injured and that the top part of the crane fell into a pool. Officials said it was a crane being assembled, but it had some sort of failure.
0:34

footage shows the moments a crane collapsed at a construction site near One Plaza in Brickell after the crane's arm snapped. Miami Fire Rescue and Miami Police responded to the scene at 1818 SW 1st Ave. after receiving reports of a possible structure collapse. According to Miami Fire Rescue PIO Lt. Pete Sanchez, no one was injured and that the top part of the crane fell into a pool. Officials said it was a crane being assembled, but it had some sort of failure.

LASHY BILLS

16,441 views • 3 months ago

Fold your way to serenity with intricate paper crane Explore Step by step tutorials, creative inspirations and elegant designs. Embrace the beauty of origami and let your imagination take flight!
0:58

Fold your way to serenity with intricate paper crane Explore Step by step tutorials, creative inspirations and elegant designs. Embrace the beauty of origami and let your imagination take flight!

Craft Gallery

50,248 views • 2 years ago

How to hook a washer dryer up in anywhere with a sink, Apartment washer hookup step by step. I’m setting up my GE all in one washer and dryer in an apartment using the kitchen sink. Step 1: Remove the aerator from the kitchen faucet. Step 2: Install a faucet to garden hose adapter. Step 3: Add a brass Y splitter so I can control the water flow. Step 4: Connect a braided washer hose from the splitter to the cold water inlet on the washer. Step 5: Cap off the hot water inlet since I’m only using cold water. Step 6: Run the drain hose into the kitchen sink. Step 7: Secure the drain hose with a zip tie or clamp so it does not jump out when the washer drains. Step 8: Slowly turn on the water and check every connection for leaks. Step 9: Run a test cycle while watching it the whole time. This is not permanent plumbing. This is a renter friendly setup so I can wash clothes without modifying the apartment. Always check your connections, use rubber washers, and do not leave it unattended the first time. #fyp #geallinonewasheranddryer #washer #apartment
0:32

How to hook a washer dryer up in anywhere with a sink, Apartment washer hookup step by step. I’m setting up my GE all in one washer and dryer in an apartment using the kitchen sink. Step 1: Remove the aerator from the kitchen faucet. Step 2: Install a faucet to garden hose adapter. Step 3: Add a brass Y splitter so I can control the water flow. Step 4: Connect a braided washer hose from the splitter to the cold water inlet on the washer. Step 5: Cap off the hot water inlet since I’m only using cold water. Step 6: Run the drain hose into the kitchen sink. Step 7: Secure the drain hose with a zip tie or clamp so it does not jump out when the washer drains. Step 8: Slowly turn on the water and check every connection for leaks. Step 9: Run a test cycle while watching it the whole time. This is not permanent plumbing. This is a renter friendly setup so I can wash clothes without modifying the apartment. Always check your connections, use rubber washers, and do not leave it unattended the first time. #fyp #geallinonewasheranddryer #washer #apartment

Computer Handyman

21,600 views • 6 months ago

Create cinematic transitions in Google Flow. Here’s the workflow: Step 1: Prompt a scene detailing your character, environment, and movement. Once you find your favorite, ask your agent to bulk-generate 4 to 6 new images from different angles, like close-ups or low ground angles. Step 2: Switch the model to Omni 1.1 Flash. Type a prompt describing the action, then add a second sentence specifically detailing your transition style (like a fade, light blur, glitch, or fast zoom). Jump into Google Flow, test out your favorite transition style, and tag us in your creations!
1:15

Create cinematic transitions in Google Flow. Here’s the workflow: Step 1: Prompt a scene detailing your character, environment, and movement. Once you find your favorite, ask your agent to bulk-generate 4 to 6 new images from different angles, like close-ups or low ground angles. Step 2: Switch the model to Omni 1.1 Flash. Type a prompt describing the action, then add a second sentence specifically detailing your transition style (like a fade, light blur, glitch, or fast zoom). Jump into Google Flow, test out your favorite transition style, and tag us in your creations!

Google Flow

17,467 views • 27 days ago

For the 1989 Bond film Licence to Kill, stuntman Simon Crane jumped from a low-flying plane onto a tanker doing 70 mph. He had no safety cable. On the first attempt, pilot Corkey Fornof touched one wheel of the plane onto the tanker, letting Crane step across. When the crew watched the footage back, they decided it looked too easy. They asked Crane to jump instead. Crane recalled hanging off the side of the plane as it rose and dipped in the heat. Behind the tanker, an ambulance, a fire engine and trucks carrying the camera crew were all racing along at the same speed.
0:53

For the 1989 Bond film Licence to Kill, stuntman Simon Crane jumped from a low-flying plane onto a tanker doing 70 mph. He had no safety cable. On the first attempt, pilot Corkey Fornof touched one wheel of the plane onto the tanker, letting Crane step across. When the crew watched the footage back, they decided it looked too easy. They asked Crane to jump instead. Crane recalled hanging off the side of the plane as it rose and dipped in the heat. Behind the tanker, an ambulance, a fire engine and trucks carrying the camera crew were all racing along at the same speed.

Morbid Knowledge

72,689 views • 5 days ago

Here's a step by step: 1. Open the in-app browser to select, scribble, and describe changes to any component in design mode. 2. Type /multitask or queue changes to run them in parallel — great for touching several unrelated components at once. 3. Get your steps in, grab a coffee, text mom to just say hi.
0:29

Here's a step by step: 1. Open the in-app browser to select, scribble, and describe changes to any component in design mode. 2. Type /multitask or queue changes to run them in parallel — great for touching several unrelated components at once. 3. Get your steps in, grab a coffee, text mom to just say hi.

John Bai

25,924 views • 5 months ago