A Wankel engine uses a triangular rotor (roughly Reuleaux-triangle shaped) that rotates inside an…
#autocad #solidbody #solidworks
A Wankel engine uses a triangular rotor (roughly Reuleaux-triangle shaped) that rotates inside an epitrochoidal housing (an oval / “figure-eight” shaped chamber).
As the rotor turns, its three faces create three separate moving chambers between the rotor and the housing wall.
The engine goes through the standard four-stroke cycle — intake → compression → ignition/power → exhaust — but differently than a piston engine: as the rotor spins, each chamber continuously passes through these stages, one after the other.
Intake: when a side of the rotor uncovers the intake port, the chamber volume expands and draws in the air-fuel mixture.
Compression: as the rotor continues, the chamber shrinks, compressing the mixture.
Power / Ignition: a spark plug ignites the mixture; the expanding gases push on the rotor face, causing the rotor to turn and producing torque.
Exhaust: as the rotor rotates more, the chamber opens to the exhaust port and the burned gases exit.
The rotor’s motion is transmitted to an eccentric output shaft (similar in function to a crankshaft) via gears; that shaft turns and delivers mechanical power to the transmission/wheels.
Because the rotor has three faces (and thus three chambers), a Wankel engine tends to produce power strokes more frequently than a single-cylinder piston engine: each rotor revolution yields three combustion events (one per chamber) — resulting in smoother power delivery.
.Our channel where mechanical engineers discuss, cooperate and chat is in the profile.📠
.@solidcam_cad Instagram 🤳
.@solidcam_cad YouTube 📲
.@solidcam_cad telegram 🔧
.
.
#autocad #solidbody #solidworks #3d #solidmodeling #catia #solidwork #3dmodeling #3dmodel #mechanical #engineering #mechanicalengineering #isometric #engineeringgraphics #instagram #additivemanufacturing #autocad3d #solidworksdesign #solid #isometric #3d #solidworks #solidbody #3dprinting #solidworkstutorial #tutorial #3dmodeling #frontview #topview #creo #proe #3dprinting #3dsmax #mechanicaldesign #cad #hydrolic
Comments
Comments from the original post on Instagram
No comments yet
