Загрузка видео...

Не удалось загрузить видео

Возникла проблема при загрузке этого видео. Это может быть связано с временными проблемами сети или видео может быть недоступно.

На главную

A WEB STUDIO CHARGES $35,000 FOR AN ANIMATED SITE. THE SAME BUILD NOW COSTS $12 - CLAUDE CODE WRITES, HIGGSFIELD RENDERS. Every agency billing $100-149/hr is just three departments. Here's each one, collapsed into a single agentic session. SYSTEM 1 - THE MOTION STUDIO (Higgsfield) Cinematic clips pulled from... 30+ generative models - hero shots, transitions, ambient loops. → This used to be a motion artist on retainer. Now it's a prompt. SYSTEM 2 - THE DEV TEAM (Claude Code) Scaffolds the site, writes the GSAP ScrollTrigger timelines and Lenis smooth-scroll, extracts frames, optimizes every asset. → A full scroll-driven build with zero hand-coded keyframes. SYSTEM 3 - THE DESIGN DEPT (baked-in cinematic layer) Six effects with no config: film grain, particles, vignette, glass cards, color tints, scroll pacing. → The polish that justified the invoice - now it ships by default. Three departments. One operator. One pass. What used to take a designer, a motion artist, and a developer through weeks of handoffs now runs in a single session - for a Claude subscription and a few dollars of Higgsfield credits. The studio was never the talent. It was the overhead. And the overhead just became three systems. Reply "web-site" to this post and I will send you the step-by-step Playbook 👇show more

ZEUS⚡️

31,057 subscribers

173,538 просмотров • 1 месяц назад •via X (Twitter)

Наука и технологии

Anya Rossi• Live Now

Private livecam show

Комментарии: 0

Нет доступных комментариев

Здесь появятся комментарии из оригинального поста

Похожие видео

THIS GUY JUST REBUILT A $35,000 ANIMATED SITE FOR $12. IF YOU RUN A WEB STUDIO, YOU SHOULD PROBABLY KEEP SCROLLING. Every agency billing $100-149/hr is selling you five departments wearing one invoice. Here’s each one - collapsed into a single agentic session. LAYER 1 - THE CONCEPT ROOM (Claude) Reads the brief, pulls references, and scripts the scroll: what the visitor feels at second 3, second 15, second 40. → Used to be a strategist and a wall of mood boards. Now it’s a conversation. LAYER 2 - THE MOTION STUDIO (Higgsfield) Cinematic clips from 30+ generative models - hero shots, transitions, ambient loops - all matched to the story from Layer 1. → Used to be a motion artist on retainer. Now it’s a prompt. LAYER 3 - THE DEV TEAM (Claude Code) Scaffolds the site, writes the GSAP ScrollTrigger timelines and Lenis smooth-scroll, extracts frames, optimizes every asset. → A full scroll-driven build with zero hand-coded keyframes. LAYER 4 - THE DESIGN DEPT (baked-in cinematic layer) Six effects, zero config: film grain, particles, vignette, glass cards, color tints, scroll pacing. → The polish that justified the invoice - now it ships by default. LAYER 5 - THE QA PASS (Claude) Checks load speed, mobile breakpoints, and whether the scroll actually lands - then rewrites whatever doesn’t. → Used to be a client call and a revision cycle. Now it’s one more turn in the same session. Five departments. One operator. One pass. A strategist, a motion artist, a developer, a designer, and a QA lead - weeks of handoffs - now run in a single session. For a Claude subscription and a few dollars of Higgsfield credits. The studio was never selling talent. It was selling overhead. And the overhead just became five layers. Follow me, reply “website” to this post and I will send you the step-by-step Playbook 👇

THIS GUY JUST REBUILT A $35,000 ANIMATED SITE FOR $12. IF YOU RUN A WEB STUDIO, YOU SHOULD PROBABLY KEEP SCROLLING. Every agency billing $100-149/hr is selling you five departments wearing one invoice. Here’s each one - collapsed into a single agentic session. LAYER 1 - THE CONCEPT ROOM (Claude) Reads the brief, pulls references, and scripts the scroll: what the visitor feels at second 3, second 15, second 40. → Used to be a strategist and a wall of mood boards. Now it’s a conversation. LAYER 2 - THE MOTION STUDIO (Higgsfield) Cinematic clips from 30+ generative models - hero shots, transitions, ambient loops - all matched to the story from Layer 1. → Used to be a motion artist on retainer. Now it’s a prompt. LAYER 3 - THE DEV TEAM (Claude Code) Scaffolds the site, writes the GSAP ScrollTrigger timelines and Lenis smooth-scroll, extracts frames, optimizes every asset. → A full scroll-driven build with zero hand-coded keyframes. LAYER 4 - THE DESIGN DEPT (baked-in cinematic layer) Six effects, zero config: film grain, particles, vignette, glass cards, color tints, scroll pacing. → The polish that justified the invoice - now it ships by default. LAYER 5 - THE QA PASS (Claude) Checks load speed, mobile breakpoints, and whether the scroll actually lands - then rewrites whatever doesn’t. → Used to be a client call and a revision cycle. Now it’s one more turn in the same session. Five departments. One operator. One pass. A strategist, a motion artist, a developer, a designer, and a QA lead - weeks of handoffs - now run in a single session. For a Claude subscription and a few dollars of Higgsfield credits. The studio was never selling talent. It was selling overhead. And the overhead just became five layers. Follow me, reply “website” to this post and I will send you the step-by-step Playbook 👇

ZEUS⚡️

141,226 просмотров • 1 месяц назад

STUDIOS QUOTE $35,000 FOR THIS WEBSITE. A FULLY ANIMATED, SCROLL-DRIVEN BUILD - CINEMATIC CLIPS, FILM GRAIN, GLASS CARDS - SHIPPED IN ONE SESSION FOR $12. Scroll it and one question won't leave: did an AI really assemble all of this in a single pass? For studios quoting $35,000 and billing $100-149/hr, that question lands like a verdict. Here's what the page actually runs: → Motion clips generated from 30+ models - not stock, not hand-shot → Scroll animations written automatically - zero hand-coded keyframes → Six cinematic effects baked in with no config: film grain, particles, vignette, glass cards, color tints, scroll pacing What that used to require: → A designer, a motion artist, and a developer → Weeks of handoffs → Six systems wired by hand - GSAP ScrollTrigger, Lenis, frame extraction, asset optimization, layout, copy That pipeline was the moat. It justified the invoice. It just collapsed into Claude Code + Higgsfield running in one pass. The gap nobody wants to say out loud: → Agency build: $6,000-$35,000+ → Real cost now: a Claude sub + a few dollars of credits → Timeline: weeks → a single session Follow me + reply "web-site" to this post and I will send you the step-by-step Playbook 👇

STUDIOS QUOTE $35,000 FOR THIS WEBSITE. A FULLY ANIMATED, SCROLL-DRIVEN BUILD - CINEMATIC CLIPS, FILM GRAIN, GLASS CARDS - SHIPPED IN ONE SESSION FOR $12. Scroll it and one question won't leave: did an AI really assemble all of this in a single pass? For studios quoting $35,000 and billing $100-149/hr, that question lands like a verdict. Here's what the page actually runs: → Motion clips generated from 30+ models - not stock, not hand-shot → Scroll animations written automatically - zero hand-coded keyframes → Six cinematic effects baked in with no config: film grain, particles, vignette, glass cards, color tints, scroll pacing What that used to require: → A designer, a motion artist, and a developer → Weeks of handoffs → Six systems wired by hand - GSAP ScrollTrigger, Lenis, frame extraction, asset optimization, layout, copy That pipeline was the moat. It justified the invoice. It just collapsed into Claude Code + Higgsfield running in one pass. The gap nobody wants to say out loud: → Agency build: $6,000-$35,000+ → Real cost now: a Claude sub + a few dollars of credits → Timeline: weeks → a single session Follow me + reply "web-site" to this post and I will send you the step-by-step Playbook 👇

ZEUS⚡️

56,961 просмотров • 1 месяц назад

FABLE 5 + HIGGSFIELD CAN BUILD A $35,000 ANIMATED WEBSITE. IN ONE AGENTIC SESSION. FOR ~$12 IN CREDITS. stop paying a web studio $6,000-$35,000. stop wiring GSAP, Lenis, and frame extraction by hand. Claude Code writes it. Higgsfield renders it. WHAT THE BUILD PRODUCES: → a fully animated, scroll-driven site → cinematic motion clips from 30+ generative models → GSAP ScrollTrigger timelines - zero hand-coded keyframes → Lenis smooth-scroll, tuned pacing → automated frame extraction + asset optimization → six cinematic effects baked in: film grain, particles, vignette, glass cards, color tints, scroll pacing → responsive layout + copy THE STACK: → Claude Code - concept, scaffolding, scroll code, QA → Higgsfield (MCP) - hero clips, transitions, ambient loops, thumbnails → GSAP + Lenis - the motion layer, written for you CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: mcp_servers: higgsfield: url: " one OAuth flow. done. now Claude can generate and pull clips directly - no manual exporting. WHAT TO PROMPT: concept + scroll: "read this brief, script the scroll - what the visitor feels at second 3, 15, 40. scaffold the site with GSAP ScrollTrigger + Lenis." motion assets: "generate the hero sting and one b-roll clip per section from the story. 3–5s, high-res." polish pass: "bake in film grain, particles, vignette, glass cards, color tints, scroll pacing. no config." QA: "check load speed, mobile breakpoints, and whether the scroll actually lands. rewrite whatever doesn't." WHAT THIS REPLACES: → web studio build: $6,000-$35,000+ → motion artist: $800-2,000/project → front-end dev: $2,000-10,000/project → weeks of handoffs: gone Fable 5 + Higgsfield: a subscription + a few dollars of credits. one session. SETUP IN 10 MINUTES: - install Claude Code - add the Higgsfield MCP + authenticate - drop your brief + references - let it scaffold, generate, and animate in one pass - preview, send fixes in plain English, ship the pipeline was the moat. it just became a prompt. Follow me, comment "WEB" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

FABLE 5 + HIGGSFIELD CAN BUILD A $35,000 ANIMATED WEBSITE. IN ONE AGENTIC SESSION. FOR ~$12 IN CREDITS. stop paying a web studio $6,000-$35,000. stop wiring GSAP, Lenis, and frame extraction by hand. Claude Code writes it. Higgsfield renders it. WHAT THE BUILD PRODUCES: → a fully animated, scroll-driven site → cinematic motion clips from 30+ generative models → GSAP ScrollTrigger timelines - zero hand-coded keyframes → Lenis smooth-scroll, tuned pacing → automated frame extraction + asset optimization → six cinematic effects baked in: film grain, particles, vignette, glass cards, color tints, scroll pacing → responsive layout + copy THE STACK: → Claude Code - concept, scaffolding, scroll code, QA → Higgsfield (MCP) - hero clips, transitions, ambient loops, thumbnails → GSAP + Lenis - the motion layer, written for you CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: mcp_servers: higgsfield: url: " one OAuth flow. done. now Claude can generate and pull clips directly - no manual exporting. WHAT TO PROMPT: concept + scroll: "read this brief, script the scroll - what the visitor feels at second 3, 15, 40. scaffold the site with GSAP ScrollTrigger + Lenis." motion assets: "generate the hero sting and one b-roll clip per section from the story. 3–5s, high-res." polish pass: "bake in film grain, particles, vignette, glass cards, color tints, scroll pacing. no config." QA: "check load speed, mobile breakpoints, and whether the scroll actually lands. rewrite whatever doesn't." WHAT THIS REPLACES: → web studio build: $6,000-$35,000+ → motion artist: $800-2,000/project → front-end dev: $2,000-10,000/project → weeks of handoffs: gone Fable 5 + Higgsfield: a subscription + a few dollars of credits. one session. SETUP IN 10 MINUTES: - install Claude Code - add the Higgsfield MCP + authenticate - drop your brief + references - let it scaffold, generate, and animate in one pass - preview, send fixes in plain English, ship the pipeline was the moat. it just became a prompt. Follow me, comment "WEB" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

ZEUS⚡️

562,257 просмотров • 1 месяц назад

A SOLO CREATOR JUST SHIPPED A $35,000-TIER ANIMATED SITE IN ONE WEEKEND - WITH CLAUDE CODE + HIGGSFIELD, FOR THE COST OF A SUBSCRIPTION. What you're looking at isn't a template. It's a fully animated, scroll-driven site, generated end to end in a single agentic session. What's actually on the page: → Cinematic motion clips pulled from 30+ generative models → Scroll animations written automatically - not a single hand-coded keyframe → 6 cinematic effects baked in with zero config: film grain, particles, vignette, glass cards, color tints, scroll pacing Scroll the demo and one question keeps surfacing: a person didn't build this by hand… did they? For studios billing $100-149/hr, that question lands like a verdict. What this normally takes: → A designer, a motion artist, and a developer → Weeks of handoffs between all three → 6 systems wired by hand - GSAP ScrollTrigger, Lenis smooth-scroll, frame extraction, asset optimization, layout, copy That pipeline was the moat. It's what justified the invoice. Here's the part the agency won't put in its pitch deck. The price gap: → Boutique agency build: $6,000-$35,000+ → Industry average project: ~$5,280 → Your cost: a Claude subscription + a few dollars of Higgsfield credits → Timeline: weeks of production → one session One operator now runs all six systems in a single pass and ships a working site - without opening a frame extractor or writing one CSS keyframe. Full breakdown of how it's built in the article below. Save it & read today 👇

A SOLO CREATOR JUST SHIPPED A $35,000-TIER ANIMATED SITE IN ONE WEEKEND - WITH CLAUDE CODE + HIGGSFIELD, FOR THE COST OF A SUBSCRIPTION. What you're looking at isn't a template. It's a fully animated, scroll-driven site, generated end to end in a single agentic session. What's actually on the page: → Cinematic motion clips pulled from 30+ generative models → Scroll animations written automatically - not a single hand-coded keyframe → 6 cinematic effects baked in with zero config: film grain, particles, vignette, glass cards, color tints, scroll pacing Scroll the demo and one question keeps surfacing: a person didn't build this by hand… did they? For studios billing $100-149/hr, that question lands like a verdict. What this normally takes: → A designer, a motion artist, and a developer → Weeks of handoffs between all three → 6 systems wired by hand - GSAP ScrollTrigger, Lenis smooth-scroll, frame extraction, asset optimization, layout, copy That pipeline was the moat. It's what justified the invoice. Here's the part the agency won't put in its pitch deck. The price gap: → Boutique agency build: $6,000-$35,000+ → Industry average project: ~$5,280 → Your cost: a Claude subscription + a few dollars of Higgsfield credits → Timeline: weeks of production → one session One operator now runs all six systems in a single pass and ships a working site - without opening a frame extractor or writing one CSS keyframe. Full breakdown of how it's built in the article below. Save it & read today 👇

ZEUS⚡️

21,598 просмотров • 1 месяц назад

A $35,000 WEBSITE IS SOLD ON 3 LIES. FABLE 5 + HIGGSFIELD JUST EXPOSED ALL THREE. every agency invoice rests on three things they'd rather you never question. here they are: → LIE 1: "custom animation takes weeks." it takes one prompt. Claude writes the GSAP ScrollTrigger + Lenis timelines - pinned sections, scrubbed video, reveals that land. zero hand-coded keyframes. → LIE 2: "cinematic visuals need a motion artist on retainer." they don't. Higgsfield pulls hero clips, transitions, and ambient loops from 30+ generative models, matched to your story - not stock everyone's seen. → LIE 3: "the polish is where your money goes." film grain, particles, vignette, glass cards, color tints - baked in, no config, no designer. the exact thing they bill a specialist for. strip the three lies and what's left is a Claude sub and a few dollars of credits. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. THE MATH: → what a studio charges: $6,000-$35,000+ → what it costs you: a Claude sub + a few dollars of Higgsfield credits → what it takes: 4 people + 3 weeks → 1 operator + 1 session the studio never sold you skill. it sold you three things it hoped you'd never check. Follow me, reply "GHOST" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

A $35,000 WEBSITE IS SOLD ON 3 LIES. FABLE 5 + HIGGSFIELD JUST EXPOSED ALL THREE. every agency invoice rests on three things they'd rather you never question. here they are: → LIE 1: "custom animation takes weeks." it takes one prompt. Claude writes the GSAP ScrollTrigger + Lenis timelines - pinned sections, scrubbed video, reveals that land. zero hand-coded keyframes. → LIE 2: "cinematic visuals need a motion artist on retainer." they don't. Higgsfield pulls hero clips, transitions, and ambient loops from 30+ generative models, matched to your story - not stock everyone's seen. → LIE 3: "the polish is where your money goes." film grain, particles, vignette, glass cards, color tints - baked in, no config, no designer. the exact thing they bill a specialist for. strip the three lies and what's left is a Claude sub and a few dollars of credits. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. THE MATH: → what a studio charges: $6,000-$35,000+ → what it costs you: a Claude sub + a few dollars of Higgsfield credits → what it takes: 4 people + 3 weeks → 1 operator + 1 session the studio never sold you skill. it sold you three things it hoped you'd never check. Follow me, reply "GHOST" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

ZEUS⚡️

32,378 просмотров • 23 дней назад

FABLE 5 + HIGGSFIELD JUST KILLED THE $35,000 WEB AGENCY. The same animated website that used to cost between $6,000 and $35,000 can now be built in a single session for around $12 in AI credits. Claude Code handles the website. Higgsfield creates the visuals. Together, they can build a complete scroll-driven website from a simple prompt. Claude writes the layout, GSAP ScrollTrigger animations, Lenis smooth scrolling, responsive pages, and checks everything before you ship. Higgsfield generates the hero videos, cinematic transitions, ambient loops, thumbnails, and every visual asset you need. By the end of one session, you have a fully animated website with cinematic motion, smooth scrolling, optimized assets, responsive layouts, and polished visual effects like film grain, particles, vignette, glass cards, and color tints. Getting started only takes a few minutes. Add Higgsfield as an MCP server inside Claude Code, complete the OAuth login once, and Claude can generate and pull videos directly into your project without manually exporting anything. The prompts are simple. Give Claude your project brief and ask it to script the entire scroll experience. Tell it to generate a hero video and supporting clips for every section. Ask it to add the finishing touches like film grain, particles, glass cards, and scroll pacing. Then let it review the site, improve loading speed, fix mobile layouts, and rewrite anything that doesn’t work. This replaces work that usually looks like this: A $6,000-$35,000 web agency. An $800-$2,000 motion designer. A $2,000-$10,000 front-end developer. And weeks of back-and-forth before launch. Now it’s Fable 5, Higgsfield, a subscription, a few dollars in AI credits, and one session. The pipeline used to be the advantage. Now it’s just a prompt. Full breakdown in the article below.

FABLE 5 + HIGGSFIELD JUST KILLED THE $35,000 WEB AGENCY. The same animated website that used to cost between $6,000 and $35,000 can now be built in a single session for around $12 in AI credits. Claude Code handles the website. Higgsfield creates the visuals. Together, they can build a complete scroll-driven website from a simple prompt. Claude writes the layout, GSAP ScrollTrigger animations, Lenis smooth scrolling, responsive pages, and checks everything before you ship. Higgsfield generates the hero videos, cinematic transitions, ambient loops, thumbnails, and every visual asset you need. By the end of one session, you have a fully animated website with cinematic motion, smooth scrolling, optimized assets, responsive layouts, and polished visual effects like film grain, particles, vignette, glass cards, and color tints. Getting started only takes a few minutes. Add Higgsfield as an MCP server inside Claude Code, complete the OAuth login once, and Claude can generate and pull videos directly into your project without manually exporting anything. The prompts are simple. Give Claude your project brief and ask it to script the entire scroll experience. Tell it to generate a hero video and supporting clips for every section. Ask it to add the finishing touches like film grain, particles, glass cards, and scroll pacing. Then let it review the site, improve loading speed, fix mobile layouts, and rewrite anything that doesn’t work. This replaces work that usually looks like this: A $6,000-$35,000 web agency. An $800-$2,000 motion designer. A $2,000-$10,000 front-end developer. And weeks of back-and-forth before launch. Now it’s Fable 5, Higgsfield, a subscription, a few dollars in AI credits, and one session. The pipeline used to be the advantage. Now it’s just a prompt. Full breakdown in the article below.

MIKE

140,288 просмотров • 28 дней назад

WHEN FABLE 5 + HIGGSFIELD FINISH A $35K SITE, HERE'S EVERYTHING THAT'S ACTUALLY IN THE FOLDER. no mockups, no "phase 2 next week." this is what ships - ready to hand a client: → the live site a scroll-driven build - GSAP ScrollTrigger + Lenis, pinned sections, scrubbed video, zero hand-coded keyframes. → the footage (yours to keep) a hero clip + one b-roll per section, generated in Higgsfield from 30+ models. not licensed stock - owned outright. → the optimized assets frames extracted, converted to WebP, lazy-loaded. loads instant, even on mobile. → the cinematic layer film grain, particles, vignette, glass cards, color tints - baked in, no plugins, no designer. → copy + responsive layout section copy drafted, breakpoints handled, mobile-tuned. that's the full studio deliverable. minus the studio, minus the month, minus the invoice. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. THE MATH: → what a studio charges: $6,000-$35,000+ → what it costs you: a Claude sub + a few dollars of Higgsfield credits → what it takes: 4 people + 3 weeks → 1 operator + 1 session agencies sold you the folder. they just took a month and $35k to fill it. Follow me, reply "FOLDER" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

WHEN FABLE 5 + HIGGSFIELD FINISH A $35K SITE, HERE'S EVERYTHING THAT'S ACTUALLY IN THE FOLDER. no mockups, no "phase 2 next week." this is what ships - ready to hand a client: → the live site a scroll-driven build - GSAP ScrollTrigger + Lenis, pinned sections, scrubbed video, zero hand-coded keyframes. → the footage (yours to keep) a hero clip + one b-roll per section, generated in Higgsfield from 30+ models. not licensed stock - owned outright. → the optimized assets frames extracted, converted to WebP, lazy-loaded. loads instant, even on mobile. → the cinematic layer film grain, particles, vignette, glass cards, color tints - baked in, no plugins, no designer. → copy + responsive layout section copy drafted, breakpoints handled, mobile-tuned. that's the full studio deliverable. minus the studio, minus the month, minus the invoice. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. THE MATH: → what a studio charges: $6,000-$35,000+ → what it costs you: a Claude sub + a few dollars of Higgsfield credits → what it takes: 4 people + 3 weeks → 1 operator + 1 session agencies sold you the folder. they just took a month and $35k to fill it. Follow me, reply "FOLDER" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

ZEUS⚡️

20,612 просмотров • 18 дней назад

HIGGSFIELD + FABLE 5 MADE A SITE THAT LOOKS LIKE A $35,000 STUDIO JOB FOR $12. NOBODY'S CLOCKED IT YET. the cheap giveaway of an AI-built site is always the same: stocky visuals, dead scroll, zero polish. this skips all three. what actually makes it read as $35k: → REAL MOTION, NOT STOCK the clips come from 30+ generative models, matched to your story - not the same three stock loops everyone's already seen. → SCROLL WITH WEIGHT GSAP ScrollTrigger + Lenis give it pacing and feel - pinned sections, scrubbed video, reveals that land. this is the thing that makes expensive sites feel expensive. → THE CINEMATIC LAYER film grain, particles, vignette, glass cards, color tints - baked in, no config. it's the polish agencies charge a designer for. → TASTE IS THE INPUT the AI executes; you direct. point real judgment at the stack and it ships premium. point lazy prompts at it and yeah - you get slop. that part's on you. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. THE MATH: → what a studio charges: $6,000-$35,000+ → what it costs you: a Claude sub + a few dollars of Higgsfield credits → what it takes: 4 people + 3 weeks → 1 operator + 1 session the tools were never the bottleneck. taste was. now taste is the only input left. Follow me, reply "LAUNCH" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

HIGGSFIELD + FABLE 5 MADE A SITE THAT LOOKS LIKE A $35,000 STUDIO JOB FOR $12. NOBODY'S CLOCKED IT YET. the cheap giveaway of an AI-built site is always the same: stocky visuals, dead scroll, zero polish. this skips all three. what actually makes it read as $35k: → REAL MOTION, NOT STOCK the clips come from 30+ generative models, matched to your story - not the same three stock loops everyone's already seen. → SCROLL WITH WEIGHT GSAP ScrollTrigger + Lenis give it pacing and feel - pinned sections, scrubbed video, reveals that land. this is the thing that makes expensive sites feel expensive. → THE CINEMATIC LAYER film grain, particles, vignette, glass cards, color tints - baked in, no config. it's the polish agencies charge a designer for. → TASTE IS THE INPUT the AI executes; you direct. point real judgment at the stack and it ships premium. point lazy prompts at it and yeah - you get slop. that part's on you. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. THE MATH: → what a studio charges: $6,000-$35,000+ → what it costs you: a Claude sub + a few dollars of Higgsfield credits → what it takes: 4 people + 3 weeks → 1 operator + 1 session the tools were never the bottleneck. taste was. now taste is the only input left. Follow me, reply "LAUNCH" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

ZEUS⚡️

80,328 просмотров • 25 дней назад

FABLE 5 + HIGGSFIELD BUILT A $35,000 ANIMATED SITE IN 50 MINUTES FOR $27 IN CREDITS. HERE'S THE ACTUAL RECEIPT. no theory. this is the play-by-play from the last one I shipped: → 0:00 - brief + scroll concept (Claude) 4 min. $0. it reads the brief and scripts what the visitor feels at second 3, 15, 40. → 0:04 - hero clip + b-roll (Higgsfield) 9 min. ~$27 in credits. cinematic footage from 30+ models, matched to the story. → 0:13 - the build (Claude Code) 20 min. $0. GSAP ScrollTrigger + Lenis, frame extraction, asset optimization. zero hand-coded keyframes. → 0:33 - cinematic layer 6 min. $0. film grain, particles, vignette, glass cards, color tints - baked in, no config. → 0:39 - QA + copy + mobile 12 min. $0. checks load speed, breakpoints, whether the scroll lands. rewrites what doesn't. TOTAL: ~51 minutes. ~$27 in credits. 1 operator. the same brief at a studio: 4 people, 3 weeks, $6,000-$35,000. same deliverable. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. the invoice was never the work. now you can literally time the work. Follow me, reply "RECEIPT" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

FABLE 5 + HIGGSFIELD BUILT A $35,000 ANIMATED SITE IN 50 MINUTES FOR $27 IN CREDITS. HERE'S THE ACTUAL RECEIPT. no theory. this is the play-by-play from the last one I shipped: → 0:00 - brief + scroll concept (Claude) 4 min. $0. it reads the brief and scripts what the visitor feels at second 3, 15, 40. → 0:04 - hero clip + b-roll (Higgsfield) 9 min. ~$27 in credits. cinematic footage from 30+ models, matched to the story. → 0:13 - the build (Claude Code) 20 min. $0. GSAP ScrollTrigger + Lenis, frame extraction, asset optimization. zero hand-coded keyframes. → 0:33 - cinematic layer 6 min. $0. film grain, particles, vignette, glass cards, color tints - baked in, no config. → 0:39 - QA + copy + mobile 12 min. $0. checks load speed, breakpoints, whether the scroll lands. rewrites what doesn't. TOTAL: ~51 minutes. ~$27 in credits. 1 operator. the same brief at a studio: 4 people, 3 weeks, $6,000-$35,000. same deliverable. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. the invoice was never the work. now you can literally time the work. Follow me, reply "RECEIPT" and I'll send you the full step-by-step Playbook. full breakdown in the article 👇

ZEUS⚡️

31,312 просмотров • 20 дней назад

HE BUILT A $10,000-TIER ANIMATED SITE WITH CLAUDE CODE - FOR THE COST OF A SUBSCRIPTION What's on screen isn't a landing page with a parallax background It's a fully interactive, scroll-driven site with real-time 3D rendered in the browser What's actually on the page: > 3D product models rotating and reacting to scroll in real time via WebGL > Smooth hover interactions and transitions - no hand-coded keyframes > Cinematic minimal aesthetic that got featured on Awwwards > Typography layering, editorial layouts, everything assembled in one session What it normally takes: > A 3D artist, a motion designer, and a frontend developer > Weeks of handoffs - modelling, exporting, wiring animations, layout, copy > Six separate systems integrated by hand That pipeline was the moat. It's what justified the invoice The price gap: > Studio build at this level: $5,000-10,000+ > Your cost: a Claude subscription Timeline: weeks of production -> a single session Full walkthrough in the article below

HE BUILT A $10,000-TIER ANIMATED SITE WITH CLAUDE CODE - FOR THE COST OF A SUBSCRIPTION What's on screen isn't a landing page with a parallax background It's a fully interactive, scroll-driven site with real-time 3D rendered in the browser What's actually on the page: > 3D product models rotating and reacting to scroll in real time via WebGL > Smooth hover interactions and transitions - no hand-coded keyframes > Cinematic minimal aesthetic that got featured on Awwwards > Typography layering, editorial layouts, everything assembled in one session What it normally takes: > A 3D artist, a motion designer, and a frontend developer > Weeks of handoffs - modelling, exporting, wiring animations, layout, copy > Six separate systems integrated by hand That pipeline was the moat. It's what justified the invoice The price gap: > Studio build at this level: $5,000-10,000+ > Your cost: a Claude subscription Timeline: weeks of production -> a single session Full walkthrough in the article below

monokern

701,142 просмотров • 1 месяц назад

HIGGSFIELD + FABLE 5 BUILT A FULL CLIENT WEBSITE. MY PART WAS 35 MINUTES. the old studio needed a designer, a dev, and someone for media. every hire ate the margin. now you personally touch exactly two stages - the models handle the heavy middle: → INTAKE (you · ~15 min) turn the client request into a tight spec: pages, brand, edge cases. judgment work - the part actually worth paying for. → DESIGN (Fable 5) brief in → design system out: layouts, components, responsive states. the week-in-Figma part, gone. → BUILD + MEDIA (in parallel) Claude Code writes the site - components, CSS, animations, CMS, deploy. Higgsfield MCP generates every visual - hero video, product shots, motion - from prompts, in the same chat. → QA + HANDOFF (you · ~20 min) review against the spec, deploy, notify. templated after your first few clients. two human stages, both fast. the slow, labor-heavy middle is the one you removed yourself from. you went from laborer to orchestrator. CONNECT HIGGSFIELD (MCP): add it as a custom connector in Claude Code: - mcp_servers: - higgsfield: - url: " one OAuth flow. Claude generates and pulls clips directly - no exporting by hand. THE MATH: → what you sell: a productized site + a monthly retainer → what it costs you to deliver: ~$750/month across every client → the margin isn't clever pricing - the cost of delivery fell through the floor while the value stayed the same. you pocket the spread. one operator, three tools, the whole studio. Follow me, reply "MCP" and I'll send you the full step-by-step playbook. full breakdown in the article 👇

ZEUS⚡️

27,534 просмотров • 16 дней назад

HE DESCRIBED A SITE TO CLAUDE CODE AND WALKED AWAY FOR 8 MINUTES What came back looked like a studio spent weeks on it. The setup that made it work: > Two design skills installed - Claude stops using safe boring defaults. > Visual references instead of text descriptions. > One detailed prompt with the concept, Claude asks clarifying questions before building. First version already solid -> review pass, one batch of fixes, done. What used to take a designer and a developer and several weeks of handoffs now takes a single session and no coding experience. Full walkthrough in the article below ↓

HE DESCRIBED A SITE TO CLAUDE CODE AND WALKED AWAY FOR 8 MINUTES What came back looked like a studio spent weeks on it. The setup that made it work: > Two design skills installed - Claude stops using safe boring defaults. > Visual references instead of text descriptions. > One detailed prompt with the concept, Claude asks clarifying questions before building. First version already solid -> review pass, one batch of fixes, done. What used to take a designer and a developer and several weeks of handoffs now takes a single session and no coding experience. Full walkthrough in the article below ↓

slash1s

52,905 просмотров • 1 месяц назад

Claude "Puzzling" while GPT 5.6 on GOD-MODE just bade a banger that's mindblowing. Here's the exact way to get a site like this, step by step: > open the desktop app, pick Sol, reasoning on High. taste work never goes to small models > drop it 3 sites with motion you love and one line: "reverse-engineer the art direction: mood, typography, pacing, and WHY each animation exists. save it as a style bible" > brief in one paragraph, goal not steps: "[your niche] site, cinematic scroll, every animation has a job. follow the bible" > house rules on top: no template hero, no stock gradients, nothing on the page moves without a reason > now the bar: "a motion designer can't tell this from an agency build." spin up a SECOND 5.6 with fresh context whose only job is to FAIL the build against that bar > /loop overnight: build, grade, close the biggest gap, again. you're asleep for all of it > when the verifier runs out of complaints: tag Sites. live URL, one click, zero hosting The deeper version of every step (the full contract, the house rules, the verifier trick, when Ultra is worth the bill) is in the article below. P.S. send the article to your GPT and tell it "we're doing this tonight".

Claude "Puzzling" while GPT 5.6 on GOD-MODE just bade a banger that's mindblowing. Here's the exact way to get a site like this, step by step: > open the desktop app, pick Sol, reasoning on High. taste work never goes to small models > drop it 3 sites with motion you love and one line: "reverse-engineer the art direction: mood, typography, pacing, and WHY each animation exists. save it as a style bible" > brief in one paragraph, goal not steps: "[your niche] site, cinematic scroll, every animation has a job. follow the bible" > house rules on top: no template hero, no stock gradients, nothing on the page moves without a reason > now the bar: "a motion designer can't tell this from an agency build." spin up a SECOND 5.6 with fresh context whose only job is to FAIL the build against that bar > /loop overnight: build, grade, close the biggest gap, again. you're asleep for all of it > when the verifier runs out of complaints: tag Sites. live URL, one click, zero hosting The deeper version of every step (the full contract, the house rules, the verifier trick, when Ultra is worth the bill) is in the article below. P.S. send the article to your GPT and tell it "we're doing this tonight".

Miraqle

206,109 просмотров • 26 дней назад

Claude Code + Higgsfield MCP is f*cking cracked 🤯 I built an entire DTC ad campaign inside Claude Code using the new Higgsfield MCP. One product URL → hero static, animated hero shot, 2 UGC clips with a creator wearing the product. 5 assets. One Claude conversation. 3 Higgsfield models. All inside Claude Code. Perfect for DTC brands and agencies who need full campaign packages without booking a shoot or briefing a designer. If you're spending hours every week generating statics in one tool, briefing a motion designer for the hero clip, then chasing a UGC creator for the talking-head shots — this MCP eliminates the entire pipeline: → Drop a product URL into Claude Code → Claude pulls the brand brief — voice, hero SKUs, visual style, target customer → Generates the hero static with ChatGPT Images 2.0 → Animates it into a 5-second cinematic opener with Seedance 2.0 → Generates a UGC creator with GPT Image 2 → Drops her in the product and generates 2 native UGC video clips with Seedance 2.0 No tab-switching between tools. No copy-pasting prompts between platforms. No briefing 3 different vendors for one campaign. What you get: → A complete campaign package — static, animation, UGC — from one product URL → Brand-specific outputs that pull from a real brief, not generic AI slop → Claude making creative decisions between every step (which variation wins, which creator fits the persona, which clip needs a re-spin) → A repeatable pipeline you can run for any product in your catalog Built 100% in Claude Code with the Higgsfield MCP. I recorded a full walkthrough showing exactly how this works: the MCP setup, every prompt, every model, the full campaign output. Want the full video walkthrough? > Like this post > Comment "MCP" And I'll send it over (must be following so I can DM)

Mike Futia

29,579 просмотров • 3 месяцев назад

You don't understand... Higgsfield MCP + Claude just automated AI film making. Every single step you used to grind through to make an AI movie, you can now do 10x faster. Drop the script into Claude Opus 4.8 and say: "Here's my script. Break it into a full shotlist. Shot number, scene, shot type, camera move and the action in each frame." Now the whole film is mapped, shot by shot. - Pull your assets. Ask Claude: "From this shotlist, list every character, every location and every prop across the whole film." That's your build list. The stuff you would need to generate and give as references in next steps. - Build the character sheets. Higgsfield MCP is connected, so Claude has hands now to do stuff directly. It generates the images itself. Have the full body, back view and close up in the character sheet. One per character. Each sheet becomes the locked reference for that face. Same move for locations, generate the empty plate for each one before anyone steps into it. - Generate the frames. Feed Claude the references plus the shot and have it write and fire the Seedance 2.0 prompt. "Using the lead's character sheet and the alley plate, generate shot 4 in Seedance 2.0. Low angle, slow push-in, rain." Claude builds the prompt, calls Seedance 2.0 and the frame lands back in chat. Use a Seedance 2.0 skill to teach Claude how to prompt it properly. Now, there are 3 ways to make the shots. Pick one per scene. - Pure prompting. Fastest one. You describe the action in words and let Seedance interpret it. For consistency across a sequence, feed it a frame from the previous shot so the look carries. - Storyboarding. You hand it a panel and it matches that composition exactly. Way more control over how the shot is framed. The tradeoff is that it can introduce more cuts than you actually want. - Path Control System This is the latest technique Seedance 2.0 technique. Generate a still base plate of the scene. Draw a red line across it to mark the exact path of the movement, then describe what's happening. Seedance follows that line for the action. Also ask Claude to remove the red line when animating. This is the one for anything where motion has to land precisely. The output reads like real live action. - Lastly, generate every clip you need, then cut them together. Get it to Capcut for editing and audio design. And that's it. The pipeline that used to need a full crew and a studio can now run from one Claude chat. 2026 is gonna be wild

You don't understand... Higgsfield MCP + Claude just automated AI film making. Every single step you used to grind through to make an AI movie, you can now do 10x faster. Drop the script into Claude Opus 4.8 and say: "Here's my script. Break it into a full shotlist. Shot number, scene, shot type, camera move and the action in each frame." Now the whole film is mapped, shot by shot. - Pull your assets. Ask Claude: "From this shotlist, list every character, every location and every prop across the whole film." That's your build list. The stuff you would need to generate and give as references in next steps. - Build the character sheets. Higgsfield MCP is connected, so Claude has hands now to do stuff directly. It generates the images itself. Have the full body, back view and close up in the character sheet. One per character. Each sheet becomes the locked reference for that face. Same move for locations, generate the empty plate for each one before anyone steps into it. - Generate the frames. Feed Claude the references plus the shot and have it write and fire the Seedance 2.0 prompt. "Using the lead's character sheet and the alley plate, generate shot 4 in Seedance 2.0. Low angle, slow push-in, rain." Claude builds the prompt, calls Seedance 2.0 and the frame lands back in chat. Use a Seedance 2.0 skill to teach Claude how to prompt it properly. Now, there are 3 ways to make the shots. Pick one per scene. - Pure prompting. Fastest one. You describe the action in words and let Seedance interpret it. For consistency across a sequence, feed it a frame from the previous shot so the look carries. - Storyboarding. You hand it a panel and it matches that composition exactly. Way more control over how the shot is framed. The tradeoff is that it can introduce more cuts than you actually want. - Path Control System This is the latest technique Seedance 2.0 technique. Generate a still base plate of the scene. Draw a red line across it to mark the exact path of the movement, then describe what's happening. Seedance follows that line for the action. Also ask Claude to remove the red line when animating. This is the one for anything where motion has to land precisely. The output reads like real live action. - Lastly, generate every clip you need, then cut them together. Get it to Capcut for editing and audio design. And that's it. The pipeline that used to need a full crew and a studio can now run from one Claude chat. 2026 is gonna be wild

Rez Karim

10,951 просмотров • 2 месяцев назад

Claude Design + Shopify is f*cking ridiculous 🤯 You can now publish pages from Claude Design → Claude Code → Shopify. Built 100% with Claude Design, Claude Code, and the Shopify CLI. Perfect for DTC brands and agencies who want to skip the design → dev handoff entirely. Here's how it works: → Design any landing page in Claude Design → Export as a zip and drop it into Claude Code → Install the Shopify + Shopify AI Toolkit plugins → Prompt Claude to convert the HTML into a Shopify page template + push to live theme → Claude uploads the images, deploys the files, and creates a published page No more handing designs off to a dev and waiting 2 weeks for a Shopify page. What you get: - A workflow that turns any Claude Design page into a real Shopify page template - Editable sections so your marketing team can swap copy, images, and CTAs without code - Images uploaded straight to Shopify Files automatically - A files-only deploy that only touches what's new in your live theme - A repeatable pipeline you can use every time you design a new landing page This is essentially the design-to-deploy pipeline brands have been waiting for. I put together a step-by-step playbook for going from Claude Design → published Shopify page. Every install, every plugin, every command, and the exact prompt that runs the whole thing. Want the playbook for free? > Like this post > Comment "SHOP" And I'll send it over (must be following so I can DM)

Claude Design + Shopify is f*cking ridiculous 🤯 You can now publish pages from Claude Design → Claude Code → Shopify. Built 100% with Claude Design, Claude Code, and the Shopify CLI. Perfect for DTC brands and agencies who want to skip the design → dev handoff entirely. Here's how it works: → Design any landing page in Claude Design → Export as a zip and drop it into Claude Code → Install the Shopify + Shopify AI Toolkit plugins → Prompt Claude to convert the HTML into a Shopify page template + push to live theme → Claude uploads the images, deploys the files, and creates a published page No more handing designs off to a dev and waiting 2 weeks for a Shopify page. What you get: - A workflow that turns any Claude Design page into a real Shopify page template - Editable sections so your marketing team can swap copy, images, and CTAs without code - Images uploaded straight to Shopify Files automatically - A files-only deploy that only touches what's new in your live theme - A repeatable pipeline you can use every time you design a new landing page This is essentially the design-to-deploy pipeline brands have been waiting for. I put together a step-by-step playbook for going from Claude Design → published Shopify page. Every install, every plugin, every command, and the exact prompt that runs the whole thing. Want the playbook for free? > Like this post > Comment "SHOP" And I'll send it over (must be following so I can DM)

Mike Futia

57,779 просмотров • 2 месяцев назад

19-year-old from china makes $9,000/month designing product sites and ships each one in an afternoon. here's his exact setup the whole thing runs on two tools that each do one job: > brief written by hand: 5 min > Moonchild builds the design system, then every screen from it: 20 min > MCP hands the design to Claude as real structure, not a screenshot: instant > Claude Code reads those exact tokens and builds the live app: 20 min > second Claude session reviews the build for drift: 10 min total: about an hour. screen five still matches screen one. no agency, no dev, no design team the trick is MCP. the design tool passes Claude the actual colors, components and layout, so it builds from the source instead of guessing from a picture. full pipeline, every prompt, in the article above.

19-year-old from china makes $9,000/month designing product sites and ships each one in an afternoon. here's his exact setup the whole thing runs on two tools that each do one job: > brief written by hand: 5 min > Moonchild builds the design system, then every screen from it: 20 min > MCP hands the design to Claude as real structure, not a screenshot: instant > Claude Code reads those exact tokens and builds the live app: 20 min > second Claude session reviews the build for drift: 10 min total: about an hour. screen five still matches screen one. no agency, no dev, no design team the trick is MCP. the design tool passes Claude the actual colors, components and layout, so it builds from the source instead of guessing from a picture. full pipeline, every prompt, in the article above.

Ridark

19,477 просмотров • 1 месяц назад

The next frontier in AI video isn't better motion - it's better perspective. What used to require a full production setup, camera rig, location scout, multi-shot choreography - now starts with a single image inside Comfy. Creator seungho__yeo ( IG ) used Hyper POV + Seedance 2 to build a complete cinematic space traversal from one still frame: → Aggressive first-person orbit through the full environment → Fly-through movement that inhabits the space, not just records it → Motion blur and single-take continuity that holds the cinematic feel end to end → No cuts. No rig. One image as the source of truth. This is what perspective design looks like at the new baseline.

The next frontier in AI video isn't better motion - it's better perspective. What used to require a full production setup, camera rig, location scout, multi-shot choreography - now starts with a single image inside Comfy. Creator seungho__yeo ( IG ) used Hyper POV + Seedance 2 to build a complete cinematic space traversal from one still frame: → Aggressive first-person orbit through the full environment → Fly-through movement that inhabits the space, not just records it → Motion blur and single-take continuity that holds the cinematic feel end to end → No cuts. No rig. One image as the source of truth. This is what perspective design looks like at the new baseline.

ComfyUI

33,964 просмотров • 1 месяц назад

Beauty ads just changed forever. Free Claude Opus 4.8 + GPT Image 2 + Seedance 2.0 workflow to spin up 100s of video ads. No studio, no model, no macro lens, no shoot day. Here's what nobody in beauty marketing wants to say out loud. That glossy lip shot. The droplet hitting the surface in slow motion. The whip-pan into the next scene. The crystalline product splash. All the stuff that used to need a real set, a real camera op, and a full shoot day. You can generate every frame of it from a text prompt now, and stitch it into a finished ad before your coffee goes cold. The workflow is almost stupidly simple: → Tell Claude Opus 4.8 the beauty shot you want (dewy skin macro, gloss-on-lips contact, ripple transition, the works) → Claude turns it into a shot-by-shot storyboard plus a prompt for every frame → GPT Image 2 generates the photoreal stills, frame by frame → Seedance 2.0 animates each one into a clip with that buttery slow-mo glide → You drop the clips into HeyOz and assemble the full ad in one place The real unlock is volume. This isn't one hero video. Once the workflow is dialed, you spin up hundreds of variations. Different shades, different models, different hooks, different transitions. The exact creative volume Meta rewards, minus the production cost that used to make it impossible. Old way: one shoot, one look, $10k+, weeks of waiting. New way: a hundred angles, any look, a few dollars each, same afternoon. I wrote up the entire workflow. The Claude storyboard prompt, the GPT Image 2 frame prompts, the Seedance motion settings, the full assembly flow. Completely free, no email gate. Want it? Comment "GLOSS" and I'll send it straight over. (make sure you're following so it can actually reach you)

Beauty ads just changed forever. Free Claude Opus 4.8 + GPT Image 2 + Seedance 2.0 workflow to spin up 100s of video ads. No studio, no model, no macro lens, no shoot day. Here's what nobody in beauty marketing wants to say out loud. That glossy lip shot. The droplet hitting the surface in slow motion. The whip-pan into the next scene. The crystalline product splash. All the stuff that used to need a real set, a real camera op, and a full shoot day. You can generate every frame of it from a text prompt now, and stitch it into a finished ad before your coffee goes cold. The workflow is almost stupidly simple: → Tell Claude Opus 4.8 the beauty shot you want (dewy skin macro, gloss-on-lips contact, ripple transition, the works) → Claude turns it into a shot-by-shot storyboard plus a prompt for every frame → GPT Image 2 generates the photoreal stills, frame by frame → Seedance 2.0 animates each one into a clip with that buttery slow-mo glide → You drop the clips into HeyOz and assemble the full ad in one place The real unlock is volume. This isn't one hero video. Once the workflow is dialed, you spin up hundreds of variations. Different shades, different models, different hooks, different transitions. The exact creative volume Meta rewards, minus the production cost that used to make it impossible. Old way: one shoot, one look, $10k+, weeks of waiting. New way: a hundred angles, any look, a few dollars each, same afternoon. I wrote up the entire workflow. The Claude storyboard prompt, the GPT Image 2 frame prompts, the Seedance motion settings, the full assembly flow. Completely free, no email gate. Want it? Comment "GLOSS" and I'll send it straight over. (make sure you're following so it can actually reach you)

Ahad Shams

11,126 просмотров • 2 месяцев назад

Fable 5 just dropped and someone already built a $10k-looking website with it. Here's the full workflow The smooth scrolling, the animations, the transitions, all built with Fable 5. Here's how to get the same result instead of a generic template. 1. Steal a direction first. Go to Mobbin or Godly and find a site whose feel you love. Screenshot it. Fable copies a vibe far better than it invents one. 2. Grab real components. Pull animation-ready blocks from Aceternity UI or Magic UI. These are built for exactly this look (scroll reveals, parallax, gradients). 3. Prompt Fable with all of it. Switch to Fable 5 in Claude Code, drop in your screenshots and the component references, and describe the sections and scroll behavior you want. Let it plan before it builds. 4. Animate with the right tools. Tell it to use GSAP with ScrollTrigger for scroll effects, or Framer Motion for React. This is what separates "nice" from "$10k." 5. Iterate on feel, not code. Preview it, then give Fable specific notes ("slower fade, more spacing on mobile") until it lands. Bookmark this

Fable 5 just dropped and someone already built a $10k-looking website with it. Here's the full workflow The smooth scrolling, the animations, the transitions, all built with Fable 5. Here's how to get the same result instead of a generic template. 1. Steal a direction first. Go to Mobbin or Godly and find a site whose feel you love. Screenshot it. Fable copies a vibe far better than it invents one. 2. Grab real components. Pull animation-ready blocks from Aceternity UI or Magic UI. These are built for exactly this look (scroll reveals, parallax, gradients). 3. Prompt Fable with all of it. Switch to Fable 5 in Claude Code, drop in your screenshots and the component references, and describe the sections and scroll behavior you want. Let it plan before it builds. 4. Animate with the right tools. Tell it to use GSAP with ScrollTrigger for scroll effects, or Framer Motion for React. This is what separates "nice" from "$10k." 5. Iterate on feel, not code. Preview it, then give Fable specific notes ("slower fade, more spacing on mobile") until it lands. Bookmark this

Fokki

72,175 просмотров • 1 месяц назад