Video wird geladen...

Video konnte nicht geladen werden

Zur Startseite

Claude Code tip: if Opus 5.5 is already your main model, Fable 5.1 has been sitting idle this whole time. wire it in with /advisor start it with /advisor fable Opus 5.5 writes every line. Fable 5.1 reads the whole session, every tool call, and says nothing until one...

imryven's profile picture

Ryven

1,355 subscribers

34,812 Aufrufe • vor 3 Tagen •via X (Twitter)

LIVE

Anya Rossi• Live Now

Private livecam show

0 Kommentare

Keine Kommentare verfügbar

Kommentare vom Original-Post werden hier angezeigt

Ähnliche Videos

This is f*cking insane. This tip saved me thousands of dollars. run Opus 5.5, Sonnet 5.5, and Fable 5.1 together, and stop burning Opus on work it was never needed for. the whole idea in one line: the strong model plans, the mid-tier model executes, Fable stays quiet until it's actually needed. roles, broken down: Opus 5.5, high effort, owns the plan and ships the final code Sonnet 5.5, medium effort, splits into explorer (reads the codebase), worker (edits files, runs tests), researcher (pulls docs) Fable 5.1, called through /advisor fable, reads everything happening in the session but stays silent unless something's actually wrong three moments where Fable speaks: → a plan goes out: is this actually the right call? → the same failure shows up again: is the search going nowhere? → the task gets marked finished: did something get skipped? Jev engineering does the same thing one level down. the forks that don't need real thought, which file, which tool, keep going or stop, go straight to Jev and come back in under half a second. the big models only ever see the forks that genuinely need a decision. anyone still running one model for everything is paying Opus prices to decide whether a file exists. drop this into Claude Code: "Rebuild my Claude Code setup around this structure: Look through ~/.claude/agents and .claude/agents for subagents already covering explorer, worker, and researcher. Only create new ones for roles that are missing. Set model: sonnet, effort: medium on each. If an existing subagent is locked to a different model, leave it as is and just list it. In ~/.claude/settings.json, set effortLevel to high and advisorModel to fable. Check for anything disabling the advisor, CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, or anything blocking feature-flag fetches, plus CLAUDE_CODE_EFFORT_LEVEL, which can override subagent effort settings. Report what you find. Don't change any of it yet. Add one line to ~/.claude/CLAUDE.md: check in with the advisor before a big plan, when the same error shows up twice, and before marking a long task done. Show every change as a diff first. Wait for my go-ahead before touching anything."
0:20

This is f*cking insane. This tip saved me thousands of dollars. run Opus 5.5, Sonnet 5.5, and Fable 5.1 together, and stop burning Opus on work it was never needed for. the whole idea in one line: the strong model plans, the mid-tier model executes, Fable stays quiet until it's actually needed. roles, broken down: Opus 5.5, high effort, owns the plan and ships the final code Sonnet 5.5, medium effort, splits into explorer (reads the codebase), worker (edits files, runs tests), researcher (pulls docs) Fable 5.1, called through /advisor fable, reads everything happening in the session but stays silent unless something's actually wrong three moments where Fable speaks: → a plan goes out: is this actually the right call? → the same failure shows up again: is the search going nowhere? → the task gets marked finished: did something get skipped? Jev engineering does the same thing one level down. the forks that don't need real thought, which file, which tool, keep going or stop, go straight to Jev and come back in under half a second. the big models only ever see the forks that genuinely need a decision. anyone still running one model for everything is paying Opus prices to decide whether a file exists. drop this into Claude Code: "Rebuild my Claude Code setup around this structure: Look through ~/.claude/agents and .claude/agents for subagents already covering explorer, worker, and researcher. Only create new ones for roles that are missing. Set model: sonnet, effort: medium on each. If an existing subagent is locked to a different model, leave it as is and just list it. In ~/.claude/settings.json, set effortLevel to high and advisorModel to fable. Check for anything disabling the advisor, CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, or anything blocking feature-flag fetches, plus CLAUDE_CODE_EFFORT_LEVEL, which can override subagent effort settings. Report what you find. Don't change any of it yet. Add one line to ~/.claude/CLAUDE.md: check in with the advisor before a big plan, when the same error shows up twice, and before marking a long task done. Show every change as a diff first. Wait for my go-ahead before touching anything."

rvaniaaa

242,307 Aufrufe • vor 2 Tagen

Jev + Opus 5.5 is the most underrated setup in AI right now, and i don't get why nobody's talking about it. I stopped letting Opus make every small decision in my agents. Jev makes them now. My Opus bill dropped ~500% on the same tasks, same results. Here's what Jev handles: - which files and notes to load before Opus sees anything - which effort level each task actually needs - what to do when a tool fails - which tests to run, and when to stop Opus only gets called for the hard reasoning. Every decision is a typed result the host checks before it runs. The exact prompt to set this up in your workflow is below.
0:20

Jev + Opus 5.5 is the most underrated setup in AI right now, and i don't get why nobody's talking about it. I stopped letting Opus make every small decision in my agents. Jev makes them now. My Opus bill dropped ~500% on the same tasks, same results. Here's what Jev handles: - which files and notes to load before Opus sees anything - which effort level each task actually needs - what to do when a tool fails - which tests to run, and when to stop Opus only gets called for the hard reasoning. Every decision is a typed result the host checks before it runs. The exact prompt to set this up in your workflow is below.

Anatoli Kopadze

74,966 Aufrufe • vor 7 Tagen

Sonnet 5 is here. It's worse than Opus 4.8 on nearly every benchmark... Does that mean it's useless? Absolutely not. Use it with Claude Code Dynamic Workflows! 1. /model set to Sonnet 5 2. /effort set to Ultracode 3. Any complex task will kick off a dynamic workflow This will only become more powerful when Fable is back. You'll use Fable 5 as the superintelligent advisor and Sonnet 5 as the fast and efficient implementer.
0:15

Sonnet 5 is here. It's worse than Opus 4.8 on nearly every benchmark... Does that mean it's useless? Absolutely not. Use it with Claude Code Dynamic Workflows! 1. /model set to Sonnet 5 2. /effort set to Ultracode 3. Any complex task will kick off a dynamic workflow This will only become more powerful when Fable is back. You'll use Fable 5 as the superintelligent advisor and Sonnet 5 as the fast and efficient implementer.

Dan McAteer

666,124 Aufrufe • vor 3 Monaten

Claude Fable 5 orchestrating Grok 4.5 is now my favorite real workflow. all you need is this free Claude Code plugin that makes Grok the default implementer. Fable writes the specs and reviews every diff, Grok 4.5 does the typing through the Grok CLI. - Grok handles the volume, Fable handles the judgment - Every diff gets cross-vendor review for free - Specs run as parallel agents when they're independent I've been testing it for a few days and the part that sold me is watching Fable refuse to write code. It sends specs down, judges what comes back, and that's it. setup: 1. claude plugin marketplace add DannyMac180/fable-advisor && claude plugin install fable-advisor 2. Install the Grok CLI from then grok login 3. /model fable It's open source, so you can read the agent files and tweak the routing however you want.
0:10

Claude Fable 5 orchestrating Grok 4.5 is now my favorite real workflow. all you need is this free Claude Code plugin that makes Grok the default implementer. Fable writes the specs and reviews every diff, Grok 4.5 does the typing through the Grok CLI. - Grok handles the volume, Fable handles the judgment - Every diff gets cross-vendor review for free - Specs run as parallel agents when they're independent I've been testing it for a few days and the part that sold me is watching Fable refuse to write code. It sends specs down, judges what comes back, and that's it. setup: 1. claude plugin marketplace add DannyMac180/fable-advisor && claude plugin install fable-advisor 2. Install the Grok CLI from then grok login 3. /model fable It's open source, so you can read the agent files and tweak the routing however you want.

Alvaro Cintas

100,804 Aufrufe • vor 2 Monaten

You can now use Jev right inside Claude Code 🤯 It's called jev-model-router, an early access mod built on Claude Code's new function hooks. Before every turn, it checks in with Jev and asks: > how mechanical the task is > how much reasoning it needs > whether it's risky Then it routes: → it'll move up to a stronger model on weak evidence, and only drops to a cheaper one when it's confident the task is simple → every decision gets logged in your transcript → if the call fails, your request runs untouched Setup: 1. copy the install command: npx claude-code-templates@latest --mod productivity/jev-model-router 2. paste it inside Claude Code 3. run claude with CLAUDE_CODE_ENABLE_FUNCTION_HOOKS=1 set 4. accept the trust prompt on first launch Link: Also works with no api key, it just falls back to a built-in classifier with no confidence score. For real jev routing, add your typesafeApiKey or gatewayApiKey to ~/.claude/settings.json. Follow me for more AI workflows and tutorials.
0:15

You can now use Jev right inside Claude Code 🤯 It's called jev-model-router, an early access mod built on Claude Code's new function hooks. Before every turn, it checks in with Jev and asks: > how mechanical the task is > how much reasoning it needs > whether it's risky Then it routes: → it'll move up to a stronger model on weak evidence, and only drops to a cheaper one when it's confident the task is simple → every decision gets logged in your transcript → if the call fails, your request runs untouched Setup: 1. copy the install command: npx claude-code-templates@latest --mod productivity/jev-model-router 2. paste it inside Claude Code 3. run claude with CLAUDE_CODE_ENABLE_FUNCTION_HOOKS=1 set 4. accept the trust prompt on first launch Link: Also works with no api key, it just falls back to a built-in classifier with no confidence score. For real jev routing, add your typesafeApiKey or gatewayApiKey to ~/.claude/settings.json. Follow me for more AI workflows and tutorials.

Alvaro Cintas

42,484 Aufrufe • vor 13 Tagen

Opus 5.5 + GrokBot + Jev... I can't believe that I build it I packed the best of AI into ONE agent - now 99% of people’s AI agents look dumb, slow, and expensive Try here (free): prompt → GrokBot → Jev chooses LLM → Claude / GPT working on GrokBot's computer 24/7 → result → Jev sends only the tasks Grok is weak at to Opus or GPT → Jev picks the best model for each task - for example, Claude for motion design and Codex for web design → runs on the ChatGPT and Claude subscriptions you already pay for (API also work) → works on GrokBot computer while you keep chatting → checks every result against the goal before you see it → GrokBot gets smarter and cheaper at the same time → And plenty more features in a bot everyone will call "obvious" by 2030 Try Jevopus, thank me later - then read the article on the full Jev architecture ↓
0:14

Opus 5.5 + GrokBot + Jev... I can't believe that I build it I packed the best of AI into ONE agent - now 99% of people’s AI agents look dumb, slow, and expensive Try here (free): prompt → GrokBot → Jev chooses LLM → Claude / GPT working on GrokBot's computer 24/7 → result → Jev sends only the tasks Grok is weak at to Opus or GPT → Jev picks the best model for each task - for example, Claude for motion design and Codex for web design → runs on the ChatGPT and Claude subscriptions you already pay for (API also work) → works on GrokBot computer while you keep chatting → checks every result against the goal before you see it → GrokBot gets smarter and cheaper at the same time → And plenty more features in a bot everyone will call "obvious" by 2030 Try Jevopus, thank me later - then read the article on the full Jev architecture ↓

codila

268,535 Aufrufe • vor 6 Tagen

$35 OF FREE CLAUDE OPUS 5 CREDITS FOR A WEEK, NO CARD ANYWHERE • the credit > Sign up with Google and the trial activates on its own, nothing to claim manually: > Opus 5 sits alongside Opus 4.8, Sonnet 4.6 and Haiku on the same key. > The window runs a week from activation. • wiring it up > base url: > model id: claude-opus-5 > In OpenCode Desktop hit Ctrl+, and add a custom provider with the id aerolink. > The same key drops into Codex, Cursor and Claude Code with nothing else changed. One key, not locked to one client -> every tool that takes a custom OpenAI-compatible endpoint reads it the same way. It routes through a third-party proxy rather than an official Anthropic channel, so keep client work off it ↓
0:16

$35 OF FREE CLAUDE OPUS 5 CREDITS FOR A WEEK, NO CARD ANYWHERE • the credit > Sign up with Google and the trial activates on its own, nothing to claim manually: > Opus 5 sits alongside Opus 4.8, Sonnet 4.6 and Haiku on the same key. > The window runs a week from activation. • wiring it up > base url: > model id: claude-opus-5 > In OpenCode Desktop hit Ctrl+, and add a custom provider with the id aerolink. > The same key drops into Codex, Cursor and Claude Code with nothing else changed. One key, not locked to one client -> every tool that takes a custom OpenAI-compatible endpoint reads it the same way. It routes through a third-party proxy rather than an official Anthropic channel, so keep client work off it ↓

slash1s

21,085 Aufrufe • vor 1 Monat

this is f**king dangerous someone figured out how to make Opus 4.8 run on Fable 5's brain with one prompt access to the best model is never guaranteed. It disappeared once already this year. but you can use it forever. here's how: 1. ask Fable 5: "write the operating manual your replacement will run on" (procedures, failure modes, a 5-question self-test) 2. save the output as one .md file and drop it into a new Claude Project as the project instructions 3. switch to Opus 4.8 and now your everyday model runs off the smart one's method, no top-tier price save and bookmark this no matter what full extraction prompt is in the article below: ↓
0:18

this is f**king dangerous someone figured out how to make Opus 4.8 run on Fable 5's brain with one prompt access to the best model is never guaranteed. It disappeared once already this year. but you can use it forever. here's how: 1. ask Fable 5: "write the operating manual your replacement will run on" (procedures, failure modes, a 5-question self-test) 2. save the output as one .md file and drop it into a new Claude Project as the project instructions 3. switch to Opus 4.8 and now your everyday model runs off the smart one's method, no top-tier price save and bookmark this no matter what full extraction prompt is in the article below: ↓

Hamza Khalid

32,581 Aufrufe • vor 2 Monaten

Routing for long-horizon coding agents is a big deal. Not Diamond just announced a model router that works natively with Claude Code. This is huge. It picks the model and reasoning effort before each turn in a session, runs through a privacy-preserving local proxy, and your requests still execute through your own gateway. In their benchmarks, it approximates Opus 4.8 Xhigh quality at 39 to 61 percent lower cost.
0:16

Routing for long-horizon coding agents is a big deal. Not Diamond just announced a model router that works natively with Claude Code. This is huge. It picks the model and reasoning effort before each turn in a session, runs through a privacy-preserving local proxy, and your requests still execute through your own gateway. In their benchmarks, it approximates Opus 4.8 Xhigh quality at 39 to 61 percent lower cost.

elvis

13,699 Aufrufe • vor 2 Monaten

You can now orchestrate Fable 5, Sol, and any model inside Codex with one plugin. It's called Codex-Orchestration. Assign Fable 5 as the advisor, Sol as the executor, or any model to any role. Then define the order they work in. Codex handles the routing. I ran Fable 5 High as planner with GPT-5.6 Sol Extra High as executor on a set of issues Opus and GPT-5.5 always struggled with. Done in 30 minutes. 40% fewer limit hits. 2x faster implementation. Install it by pasting this into Codex: "Install Codex Orchestration: codex plugin marketplace add Cjbuilds/Codex-Orchestration codex plugin add codex-orchestration@codex-orchestration Verify the installation, then tell me to start a new task." Then assign your models: @ codex-orchestration advisor: Claude Fable 5 High, Executor: GPT-5.6 Sol High Open source. Tweak the routing however you want.
0:14

You can now orchestrate Fable 5, Sol, and any model inside Codex with one plugin. It's called Codex-Orchestration. Assign Fable 5 as the advisor, Sol as the executor, or any model to any role. Then define the order they work in. Codex handles the routing. I ran Fable 5 High as planner with GPT-5.6 Sol Extra High as executor on a set of issues Opus and GPT-5.5 always struggled with. Done in 30 minutes. 40% fewer limit hits. 2x faster implementation. Install it by pasting this into Codex: "Install Codex Orchestration: codex plugin marketplace add Cjbuilds/Codex-Orchestration codex plugin add codex-orchestration@codex-orchestration Verify the installation, then tell me to start a new task." Then assign your models: @ codex-orchestration advisor: Claude Fable 5 High, Executor: GPT-5.6 Sol High Open source. Tweak the routing however you want.

Alvaro Cintas

92,518 Aufrufe • vor 2 Monaten

Fable 5 just dropped and someone already built a $10k-looking website with it. Here's the full workflow The smooth scrolling, the animations, the transitions, all built with Fable 5. Here's how to get the same result instead of a generic template. 1. Steal a direction first. Go to Mobbin or Godly and find a site whose feel you love. Screenshot it. Fable copies a vibe far better than it invents one. 2. Grab real components. Pull animation-ready blocks from Aceternity UI or Magic UI. These are built for exactly this look (scroll reveals, parallax, gradients). 3. Prompt Fable with all of it. Switch to Fable 5 in Claude Code, drop in your screenshots and the component references, and describe the sections and scroll behavior you want. Let it plan before it builds. 4. Animate with the right tools. Tell it to use GSAP with ScrollTrigger for scroll effects, or Framer Motion for React. This is what separates "nice" from "$10k." 5. Iterate on feel, not code. Preview it, then give Fable specific notes ("slower fade, more spacing on mobile") until it lands. Bookmark this
0:16

Fable 5 just dropped and someone already built a $10k-looking website with it. Here's the full workflow The smooth scrolling, the animations, the transitions, all built with Fable 5. Here's how to get the same result instead of a generic template. 1. Steal a direction first. Go to Mobbin or Godly and find a site whose feel you love. Screenshot it. Fable copies a vibe far better than it invents one. 2. Grab real components. Pull animation-ready blocks from Aceternity UI or Magic UI. These are built for exactly this look (scroll reveals, parallax, gradients). 3. Prompt Fable with all of it. Switch to Fable 5 in Claude Code, drop in your screenshots and the component references, and describe the sections and scroll behavior you want. Let it plan before it builds. 4. Animate with the right tools. Tell it to use GSAP with ScrollTrigger for scroll effects, or Framer Motion for React. This is what separates "nice" from "$10k." 5. Iterate on feel, not code. Preview it, then give Fable specific notes ("slower fade, more spacing on mobile") until it lands. Bookmark this

Fokki

72,175 Aufrufe • vor 3 Monaten

Fable 5 + Goose Ads is insane – literally a full ad-creative team right in Claude Code. 1. Install the skill: npx gooseworks install --all npx gooseworks login 2. Ask Claude Fable to make ads for your brand. /goose-ads create ads for my brand . Fable 5 pulls the ads already winning in your space and rebuilds them on-brand – your product, your palette, your copy – a whole batch, ready to test. It can ship a month of creative testing in a single prompt. This is also possible with Opus and Sonnet, but Fable's brand research is next level. Link below.
0:11

Fable 5 + Goose Ads is insane – literally a full ad-creative team right in Claude Code. 1. Install the skill: npx gooseworks install --all npx gooseworks login 2. Ask Claude Fable to make ads for your brand. /goose-ads create ads for my brand . Fable 5 pulls the ads already winning in your space and rebuilds them on-brand – your product, your palette, your copy – a whole batch, ready to test. It can ship a month of creative testing in a single prompt. This is also possible with Opus and Sonnet, but Fable's brand research is next level. Link below.

Shiv

223,176 Aufrufe • vor 3 Monaten

Claude Code's new dynamic workflow is the real deal. 🤖 Why it matters: It's not just a chain of prompts — it's an autonomous agent swarm. 1. Set model to Opus 4.8 + reasoning effort /ultracode 2. Claude detects complexity, writes orchestration script on the fly 3. Spawns a parallel fleet of coordinated subagents Operator takeaway: This is the first time I've seen an agent actually decompose and delegate autonomously without a rigid framework. Have you tried it yet? 🚀
0:13

Claude Code's new dynamic workflow is the real deal. 🤖 Why it matters: It's not just a chain of prompts — it's an autonomous agent swarm. 1. Set model to Opus 4.8 + reasoning effort /ultracode 2. Claude detects complexity, writes orchestration script on the fly 3. Spawns a parallel fleet of coordinated subagents Operator takeaway: This is the first time I've seen an agent actually decompose and delegate autonomously without a rigid framework. Have you tried it yet? 🚀

EK

197,752 Aufrufe • vor 4 Monaten

one of my favorite ways to use claude code skills right now - combining remotion with claude-in-chrome for motion video creation. the workflow is addictive. the clip you see here was produced with minimal prompting effort let me know if you would like me to write a full break down of this process. you describe to claude code what you want, claude code writes the remotion components, opens the remotion studio (via browser) with claude-in-chrome, sees the actual rendered output, and iterates on it in real time. need the arrows pointing to the center of the bubbles instead of the edge? just say it. need the layout shifted to the center? say it. claude sees the preview, adjusts the code, re-renders. then when you're happy you tell claude code to render the final video. but skills are what make this possible. remotion knowledge + browser automation + the taste to iterate visually. no copy pasting screenshots back and forth. no "can you try moving it 10px to the right" over chat. it just looks and fixes. this is the kind of workflow that makes you realize how much further claude code can go beyond just writing code in a terminal. i didn't touch any code while working on the clip you see if you haven't tried combining skills together like this - start experimenting. the skills combos is where the magic is at.
0:16

one of my favorite ways to use claude code skills right now - combining remotion with claude-in-chrome for motion video creation. the workflow is addictive. the clip you see here was produced with minimal prompting effort let me know if you would like me to write a full break down of this process. you describe to claude code what you want, claude code writes the remotion components, opens the remotion studio (via browser) with claude-in-chrome, sees the actual rendered output, and iterates on it in real time. need the arrows pointing to the center of the bubbles instead of the edge? just say it. need the layout shifted to the center? say it. claude sees the preview, adjusts the code, re-renders. then when you're happy you tell claude code to render the final video. but skills are what make this possible. remotion knowledge + browser automation + the taste to iterate visually. no copy pasting screenshots back and forth. no "can you try moving it 10px to the right" over chat. it just looks and fixes. this is the kind of workflow that makes you realize how much further claude code can go beyond just writing code in a terminal. i didn't touch any code while working on the clip you see if you haven't tried combining skills together like this - start experimenting. the skills combos is where the magic is at.

elvis

46,533 Aufrufe • vor 7 Monaten

JEV ENGINEERING JUST CUT A CLAUDE LOOP FROM $765/MONTH TO $3.02 the expensive part isn’t always writing code. a busy overnight loop can burn ~600 decisions just asking what to do next, whether a command is safe, or if the task is finished. trigger → Jev → allow / stop / wake → Claude only builds when needed at roughly 4,000 tokens per decision, those checks can cost ~$25.50 a night on Fable 5.1. Jev handles the same decision layer at $0.042 per 1M input tokens with output free. over 30 nights that moves the decision bill from ~$765 to $3.02. batch multiple questions into one call and it falls again to about $1.08/month. that’s the part i care about: Claude keeps the expensive work that actually needs intelligence, while Jev handles the hundreds of tiny judgment calls around it.
0:15

JEV ENGINEERING JUST CUT A CLAUDE LOOP FROM $765/MONTH TO $3.02 the expensive part isn’t always writing code. a busy overnight loop can burn ~600 decisions just asking what to do next, whether a command is safe, or if the task is finished. trigger → Jev → allow / stop / wake → Claude only builds when needed at roughly 4,000 tokens per decision, those checks can cost ~$25.50 a night on Fable 5.1. Jev handles the same decision layer at $0.042 per 1M input tokens with output free. over 30 nights that moves the decision bill from ~$765 to $3.02. batch multiple questions into one call and it falls again to about $1.08/month. that’s the part i care about: Claude keeps the expensive work that actually needs intelligence, while Jev handles the hundreds of tiny judgment calls around it.

Gipp 🦅

25,081 Aufrufe • vor 7 Tagen

ANTHROPIC JUST TURNED AI AGENTS INTO GIT REPOS Anthropic shipped "ant" - a CLI that runs every Claude API endpoint straight from your terminal. The headline isn't the terminal access. It's that you can now version-control an AI agent as YAML in Git and have CI sync it to the Claude Platform, the same way you ship code. - Every API resource is a subcommand: messages, models, files, agents, sessions - Define an agent in a YAML file, check it into your repo, and keep it in sync with one update command - Spin up a session, send it an event, then pull every event and tool call back from the same CLI - Claude Code knows how to drive ant out of the box - it shells out and reads the results with no glue code Agents just stopped being prompts you babysit and became infrastructure you deploy.
0:18

ANTHROPIC JUST TURNED AI AGENTS INTO GIT REPOS Anthropic shipped "ant" - a CLI that runs every Claude API endpoint straight from your terminal. The headline isn't the terminal access. It's that you can now version-control an AI agent as YAML in Git and have CI sync it to the Claude Platform, the same way you ship code. - Every API resource is a subcommand: messages, models, files, agents, sessions - Define an agent in a YAML file, check it into your repo, and keep it in sync with one update command - Spin up a session, send it an event, then pull every event and tool call back from the same CLI - Claude Code knows how to drive ant out of the box - it shells out and reads the results with no glue code Agents just stopped being prompts you babysit and became infrastructure you deploy.

BuBBliK

200,456 Aufrufe • vor 4 Monaten

Everyone is dunking on Sonnet 5 for losing to Opus 4.8 on benchmarks. They're all making the same mistake, judging a teammate by a solo test. Sonnet 5 was never built to win alone. Set the model to Sonnet 5, effort to Ultracode, and any complex task auto-kicks a dynamic workflow where it plans, spawns agents, executes and checks its own work, fast and cheap. When Fable 5 comes back, the setup gets stupid good. Fable 5 decides what to build, Sonnet 5 actually builds it. You stop paying flagship prices to do grunt work.
0:15

Everyone is dunking on Sonnet 5 for losing to Opus 4.8 on benchmarks. They're all making the same mistake, judging a teammate by a solo test. Sonnet 5 was never built to win alone. Set the model to Sonnet 5, effort to Ultracode, and any complex task auto-kicks a dynamic workflow where it plans, spawns agents, executes and checks its own work, fast and cheap. When Fable 5 comes back, the setup gets stupid good. Fable 5 decides what to build, Sonnet 5 actually builds it. You stop paying flagship prices to do grunt work.

0xMarioNawfal

98,313 Aufrufe • vor 3 Monaten

I just tried the new Gemini-4 Pro Preview and honestly, for 3D work it’s right up there with Fable 5.1 and GPT-6 Astra, all in a single shot, I genuinely didn’t expect it to be this good, It only used around 10% of my weekly limit on the $20 plan, I’m going to make a comparison video against Opus 5.2 or Fable and Astra if I can, I still can’t believe it, From what I’ve tested so far, this is easily top 1 or 2 for the best one shot execution I’ve seen
0:12

I just tried the new Gemini-4 Pro Preview and honestly, for 3D work it’s right up there with Fable 5.1 and GPT-6 Astra, all in a single shot, I genuinely didn’t expect it to be this good, It only used around 10% of my weekly limit on the $20 plan, I’m going to make a comparison video against Opus 5.2 or Fable and Astra if I can, I still can’t believe it, From what I’ve tested so far, this is easily top 1 or 2 for the best one shot execution I’ve seen

Iam_

27,952 Aufrufe • vor 16 Tagen

I still don't understand why everyone is not using this yet. Thanks to it, a year ago I increased my income to 17,000 dollars a month Andrey Karpathy, co-founder of OpenAI, published a simple idea that got 16 million views: stop using AI to write code, use it to build a second brain You point Claude Code to a folder, drop any source in there (an article, transcript, PDF) and Claude reads it, links it, and saves it into a living wiki of everything you know. It compounds like interest: the more you feed it, the smarter it gets Here is the gist: Install Obsidian, create a vault, open it in Claude Code Paste the file with Karpathy's wiki idea and tell Claude to build it Claude creates three folders: raw for sources, wiki for its pages, CLAUDE which runs everything Drop any source into raw and say "ingest this" Ask questions across everything, forever Five minutes to set up, and you never start with an empty chat again The full step-by-step guide is in the article. Save to bookmarks
0:10

I still don't understand why everyone is not using this yet. Thanks to it, a year ago I increased my income to 17,000 dollars a month Andrey Karpathy, co-founder of OpenAI, published a simple idea that got 16 million views: stop using AI to write code, use it to build a second brain You point Claude Code to a folder, drop any source in there (an article, transcript, PDF) and Claude reads it, links it, and saves it into a living wiki of everything you know. It compounds like interest: the more you feed it, the smarter it gets Here is the gist: Install Obsidian, create a vault, open it in Claude Code Paste the file with Karpathy's wiki idea and tell Claude to build it Claude creates three folders: raw for sources, wiki for its pages, CLAUDE which runs everything Drop any source into raw and say "ingest this" Ask questions across everything, forever Five minutes to set up, and you never start with an empty chat again The full step-by-step guide is in the article. Save to bookmarks

Bober_smart

2,876,475 Aufrufe • vor 1 Monat

I genuinely don't understand why everyone isn't using this yet Andrej Karpathy, a co-founder of OpenAI, posted a simple idea that hit 16 million views: stop using AI to write code, use it to build a second brain. You point Claude Code at a folder, drop in any source, an article, a transcript, a PDF, and Claude reads it, links it, and files it into a living wiki of everything you know. It compounds like interest, the more you feed it, the smarter it gets. Here's the whole thing: > Install Obsidian, create a vault, open it in Claude Code > Paste Karpathy's wiki idea file and tell Claude to build it > Claude makes three folders: raw for sources, wiki for its pages, a CLAUDE.md that runs it > Drop any source into raw and say "ingest this" > Ask questions across everything, forever Five minutes to set up, and you never start from a blank chat again. Full step-by-step guide with Claude and Obsidian, link below. Bookmark this
0:16

I genuinely don't understand why everyone isn't using this yet Andrej Karpathy, a co-founder of OpenAI, posted a simple idea that hit 16 million views: stop using AI to write code, use it to build a second brain. You point Claude Code at a folder, drop in any source, an article, a transcript, a PDF, and Claude reads it, links it, and files it into a living wiki of everything you know. It compounds like interest, the more you feed it, the smarter it gets. Here's the whole thing: > Install Obsidian, create a vault, open it in Claude Code > Paste Karpathy's wiki idea file and tell Claude to build it > Claude makes three folders: raw for sources, wiki for its pages, a CLAUDE.md that runs it > Drop any source into raw and say "ingest this" > Ask questions across everything, forever Five minutes to set up, and you never start from a blank chat again. Full step-by-step guide with Claude and Obsidian, link below. Bookmark this

Ridark

7,020,848 Aufrufe • vor 3 Monaten