Loading video...

Video Failed to Load

There was a problem loading this video. This could be due to a temporary network issue or the video might be unavailable.

Following extensive testing, I have identified the most reliable process for loading etaHEN with Byerpervisor: 1. load etaHEN which will check the FW version; if it is below 3.00, it will run Byerpervisor, display a notification, and automatically suspend after 3 seconds. (Clip 1) 2. Resume the PS5, then... show more

LM

30,799 subscribers

20,515 views • 1 year ago •via X (Twitter)

Science & Technology

Anya Rossi• Live Now

Private livecam show

0 Comments

No comments available

Comments from the original post will appear here

Related Videos

So I have been trying to do my own take on the 4-2-1-3. but it is not for my play style. Will try some more, later on. For now I ended up with a 5-2-1-2 that I like a lot. And it’s surprisingly good against the 4-2-1-3. Anyone wants to test? 🔥🏴‍☠️

So I have been trying to do my own take on the 4-2-1-3. but it is not for my play style. Will try some more, later on. For now I ended up with a 5-2-1-2 that I like a lot. And it’s surprisingly good against the 4-2-1-3. Anyone wants to test? 🔥🏴‍☠️

FC Pirate 🏴‍☠️

29,703 views • 1 year ago

2. Day 1 - We selected Lausanne as Base city for 3 days. We went to Zermatt which is a beautiful Car Free city and you will find beautiful Chalets all around. Additionally, you can either visit Matterhon ( Toblerone mountain) , or Gornergrat but I would recommend Gornergrat as here, the train will pass through the snow clad mountains which will be additional 29 CHF two way with 50% discount due to Swiss Pass. #Zermatt #SwissPass #Gornergrat #Toblerone

2. Day 1 - We selected Lausanne as Base city for 3 days. We went to Zermatt which is a beautiful Car Free city and you will find beautiful Chalets all around. Additionally, you can either visit Matterhon ( Toblerone mountain) , or Gornergrat but I would recommend Gornergrat as here, the train will pass through the snow clad mountains which will be additional 29 CHF two way with 50% discount due to Swiss Pass. #Zermatt #SwissPass #Gornergrat #Toblerone

The Startup CA

435,329 views • 2 years ago

$I came across a great persistence mechanism and created a Sigma rule for it. Just drop your batch script or add a line that points to your payload inside C:\Windows\Setup\Scripts\ErrorHandler.cmd, and upon execution of C:\Windows\System32\oobe\Setup.exe, the payload will run. In the clip below, I have cmd.exe /c calc.exe as the payload. If ErrorHandler doesn't exist, you can create it along with the directory. Thanks to hexing for posting about it 🙏 In regards to the rest binaries under the C:\Windows\System32\oobe\ directory, most of them will not work, whereas others will force a restart (i.e. audit.exe) 🔗:$

I came across a great persistence mechanism and created a Sigma rule for it. Just drop your batch script or add a line that points to your payload inside C:\Windows\Setup\Scripts\ErrorHandler.cmd, and upon execution of C:\Windows\System32\oobe\Setup.exe, the payload will run. In the clip below, I have cmd.exe /c calc.exe as the payload. If ErrorHandler doesn't exist, you can create it along with the directory. Thanks to hexing for posting about it 🙏 In regards to the rest binaries under the C:\Windows\System32\oobe\ directory, most of them will not work, whereas others will force a restart (i.e. audit.exe) 🔗:

Kostas

17,508 views • 2 years ago

If you’re starting the Doomsteel grind, in my opinion this is currently the fastest method for the 300 elite kills.🔮 1. Load into Cursed Mode and run Samantha’s Drawing and Teddy Bear relics. 2. Early on, focus on farming enough points, then after round 16, head into the fog with a fully Pack-a-Punched weapon of at least purple rarity. 3. Inside the fog, kill the bears until your weapon gains Doomsteel. 4. Once it does, leave the fog to flip the round, this will also give you a new weapon thanks to Samantha’s Drawing. 5. If you pair this with Mule Kick’s Multi-Pack augment, every time your weapons swap, they all have a chance to come Pack-a-Punched as well.

If you’re starting the Doomsteel grind, in my opinion this is currently the fastest method for the 300 elite kills.🔮 1. Load into Cursed Mode and run Samantha’s Drawing and Teddy Bear relics. 2. Early on, focus on farming enough points, then after round 16, head into the fog with a fully Pack-a-Punched weapon of at least purple rarity. 3. Inside the fog, kill the bears until your weapon gains Doomsteel. 4. Once it does, leave the fog to flip the round, this will also give you a new weapon thanks to Samantha’s Drawing. 5. If you pair this with Mule Kick’s Multi-Pack augment, every time your weapons swap, they all have a chance to come Pack-a-Punched as well.

Mystery

59,828 views • 7 months ago

Our team in Lviv is already working; we have identified 3 vulnerable families, 2 with dads fighting on the front and 1 who is a medic; we will repair all windows + refurbish the inside of the apartments. If you would like to donate to help with costs:

Our team in Lviv is already working; we have identified 3 vulnerable families, 2 with dads fighting on the front and 1 who is a medic; we will repair all windows + refurbish the inside of the apartments. If you would like to donate to help with costs:

Richard Woodruff 🇺🇦

29,640 views • 2 years ago

Riot has actually allowed Valorant to become unplayable for streamers (see clip below). There is a tracker app out right now that is widely abused that allows players to see through streamer mode, and it links the twitch associated with the account. Every streamer that I watch rn is forced to run delay to even consider enjoying their games :/ It's so sad. Whether you have 3 viewers or 3000 you will get sniped.

Riot has actually allowed Valorant to become unplayable for streamers (see clip below). There is a tracker app out right now that is widely abused that allows players to see through streamer mode, and it links the twitch associated with the account. Every streamer that I watch rn is forced to run delay to even consider enjoying their games :/ It's so sad. Whether you have 3 viewers or 3000 you will get sniped.

L21saac

872,460 views • 2 years ago

Is Static Drilling the Kata of Jiu Jitsu? I have never done Kata, so I do not have a strong opinion on its value. It does look boring to me, though. Static drilling has some value, but not as much as live drills using the Constraints-Led Approach (CLA). If someone shows me a new move or solution, I will statically drill it 2 or 3 times. Then I will try to incorporate it in some live training. Static drilling makes up less than 1% of my training now. CLA will build your grappling skills faster and is a lot more fun.

Is Static Drilling the Kata of Jiu Jitsu? I have never done Kata, so I do not have a strong opinion on its value. It does look boring to me, though. Static drilling has some value, but not as much as live drills using the Constraints-Led Approach (CLA). If someone shows me a new move or solution, I will statically drill it 2 or 3 times. Then I will try to incorporate it in some live training. Static drilling makes up less than 1% of my training now. CLA will build your grappling skills faster and is a lot more fun.

Old Man BJJ Black Belt

11,277 views • 2 months ago

if you use a video e.g. as a hero background, Low Power Mode disables autoplay and WebKit puts a native play button over the video instead which is annoying because: 1. it looks completely out of place 2. the button may not even be tappable because of the content layered over it and since you can’t force autoplay with one workaround is to show the first frame as an image over the video, then hide it once the video actually starts playing so in worst case, the user just gets a static hero image:)

if you use a video e.g. as a hero background, Low Power Mode disables autoplay and WebKit puts a native play button over the video instead which is annoying because: 1. it looks completely out of place 2. the button may not even be tappable because of the content layered over it and since you can’t force autoplay with one workaround is to show the first frame as an image over the video, then hide it once the video actually starts playing so in worst case, the user just gets a static hero image:)

daniel petho

131,142 views • 15 days ago

Strait of Hormuz over the last 24 hours. US successfully escorted one group of tankers in through the Oman lane. All of them had their AIS off, but there was one Indian cargo ship that had it on when it went through. The list can be seen below. Following two days of US strikes, the US is back to escorting ships in. My guess is that it will try to escort a group out tonight, and Iran can either respond and create more escalation going into the weekend or it can lose leverage. The Oman lane will be heavily contested in the coming days, which leaves either side with no choice but to escalate. I have included the video from MarineTraffic.

Strait of Hormuz over the last 24 hours. US successfully escorted one group of tankers in through the Oman lane. All of them had their AIS off, but there was one Indian cargo ship that had it on when it went through. The list can be seen below. Following two days of US strikes, the US is back to escorting ships in. My guess is that it will try to escort a group out tonight, and Iran can either respond and create more escalation going into the weekend or it can lose leverage. The Oman lane will be heavily contested in the coming days, which leaves either side with no choice but to escalate. I have included the video from MarineTraffic.

HFI Research

167,054 views • 1 month ago

🎮 Game submissions for the #vibejam can now we browsed at It syncs the game entrants and also their analytics, so you can sort by [ Most played ] There's about 74 entrants now, but most games will be submitted in the final week which it projects will be over 1,000+ but we'll see! This was the idea last year to do to with the Vibe Jam but back then I didn't have AI to make it this easy, and also I didn't ask for screenshots of the games which now we do, I'll now add a similar gallery to the old 2025 page

🎮 Game submissions for the #vibejam can now we browsed at It syncs the game entrants and also their analytics, so you can sort by [ Most played ] There's about 74 entrants now, but most games will be submitted in the final week which it projects will be over 1,000+ but we'll see! This was the idea last year to do to with the Vibe Jam but back then I didn't have AI to make it this easy, and also I didn't ask for screenshots of the games which now we do, I'll now add a similar gallery to the old 2025 page

@levelsio

91,766 views • 4 months ago

1, 2, or 3? Which one you picking? Random RT gets one on the house Must be following me and The Ten Co to claim if you win! Tag someone in the comments you gone split it with! We’ll pick a winner Friday! Don’t forget to hit that like button family.

1, 2, or 3? Which one you picking? Random RT gets one on the house Must be following me and The Ten Co to claim if you win! Tag someone in the comments you gone split it with! We’ll pick a winner Friday! Don’t forget to hit that like button family.

10 toes 🏃🏾‍♂️💰

69,733 views • 5 months ago

I've made a super nice Claude Code system for automatically updating my app documentation. It runs and uses my app using Playwright MCP taking screenshots as it goes, which it then marks up with arrows etc. Then writes all the support documentation. THEN uploads them all to my Crisp helpdesk! This is saving me literally days 🤣 Will do a video on how I set this up if anyone interested

I've made a super nice Claude Code system for automatically updating my app documentation. It runs and uses my app using Playwright MCP taking screenshots as it goes, which it then marks up with arrows etc. Then writes all the support documentation. THEN uploads them all to my Crisp helpdesk! This is saving me literally days 🤣 Will do a video on how I set this up if anyone interested

James Devonport

11,703 views • 6 months ago

The thing I help hitters with the most.. (1 good way to train it👇🏼) They start on time but never actually get loaded to GO. They think they’re ready. They’re not. So they start earlier next time. Same problem. —— This is a conversation I have with almost every hitter. When is the right time for you? - Based on your load style - Based on how long your load takes - Based on the pitcher’s velo, windup, or slide step —— If that’s you, try a “loaded at release” type load. Bobby Witt. Judge. Get your hip and elbow loaded early. Then stride with it ready to fire. “The pitcher is up there for 20 seconds telling you to get ready. Shame on you if you’re not ready to swing.” ____ If I have you in the cage, what I’ll do is have you get into a no stride position, get ready to swing and I stand there for 1-4 seconds… Holding my hand out over the plate ready to snap my fingers. When I snap, you swing. Do that 4-5x. You get the quickness, readiness feeling. Then we go back to stride with moving ball and you’re trying to time up that same GO move with the ball With your foot up in the air and the GO will make the foot go down. Not foot down then swing. That typically kills quickness. This works 95% of the time I’d say! —— > Send this to a hitter who needs it > Save it for when you need it.

The thing I help hitters with the most.. (1 good way to train it👇🏼) They start on time but never actually get loaded to GO. They think they’re ready. They’re not. So they start earlier next time. Same problem. —— This is a conversation I have with almost every hitter. When is the right time for you? - Based on your load style - Based on how long your load takes - Based on the pitcher’s velo, windup, or slide step —— If that’s you, try a “loaded at release” type load. Bobby Witt. Judge. Get your hip and elbow loaded early. Then stride with it ready to fire. “The pitcher is up there for 20 seconds telling you to get ready. Shame on you if you’re not ready to swing.” ____ If I have you in the cage, what I’ll do is have you get into a no stride position, get ready to swing and I stand there for 1-4 seconds… Holding my hand out over the plate ready to snap my fingers. When I snap, you swing. Do that 4-5x. You get the quickness, readiness feeling. Then we go back to stride with moving ball and you’re trying to time up that same GO move with the ball With your foot up in the air and the GO will make the foot go down. Not foot down then swing. That typically kills quickness. This works 95% of the time I’d say! —— > Send this to a hitter who needs it > Save it for when you need it.

Trey Hannam

39,339 views • 3 months ago

If you have lagging Arms and bringing them up to par is your TOP PRIORITY… I’d recommend doing something like this each week: Upper A • 2-3 sets of “The GREATEST Triceps exercise known to man” • 2-3 sets of Supinated Grip Curls w/ Upper Arm Support • 2-3 sets of Machine or Cable Overhead Extensions • 2-3 sets of Hammer Grip Curls w/ Upper Arm Support Upper B (Performed 3-4 days after Upper A) • 2-3 sets of Dip Machine • 2-3 sets of Machine or Cable Preacher Curls • 2-3 sets of “The GREATEST Triceps exercise known to man” OR Machine or Cable Overhead Extensions • 2-3 sets of Hammer Grip Curls w/ Upper Arm Support This will result in you doing somewhere between 8-12 sets of direct Bicep and Tricep work per week Low likelihood you need any more volume than that to improve your Arms mightily if following the notes below: 1) The ideal rep range to be using when performing the exercises mentioned is the 5ish to 10ish rep range — Choose a weight you can do for 5, 6, 7 reps @ 0-2 RIR…once you can do that weight for 8, 9, 10ish reps, increase the load by 5ish pounds 2) You should perform all reps of all the listed exercises with a controlled (but not overly slow) eccentric and an explosive (but still controlled) concentric 3) You should perform these exercises very early in your workout to ensure they are as efficient/effective as possible — If you perform them later on, you will not get as robust a growth stimulus from the sets because of the outstanding fatigue that will be present from the earlier sets/exercises in your workout Additional notes: - You may sub any of these exercises for comparable exercises due to preferences and/or equipment availability — Ex: Dip Machine subbed for Weighted Dips - I probably forgot something that I should’ve mentioned…if I think of it I’ll drop it in the post below

If you have lagging Arms and bringing them up to par is your TOP PRIORITY… I’d recommend doing something like this each week: Upper A • 2-3 sets of “The GREATEST Triceps exercise known to man” • 2-3 sets of Supinated Grip Curls w/ Upper Arm Support • 2-3 sets of Machine or Cable Overhead Extensions • 2-3 sets of Hammer Grip Curls w/ Upper Arm Support Upper B (Performed 3-4 days after Upper A) • 2-3 sets of Dip Machine • 2-3 sets of Machine or Cable Preacher Curls • 2-3 sets of “The GREATEST Triceps exercise known to man” OR Machine or Cable Overhead Extensions • 2-3 sets of Hammer Grip Curls w/ Upper Arm Support This will result in you doing somewhere between 8-12 sets of direct Bicep and Tricep work per week Low likelihood you need any more volume than that to improve your Arms mightily if following the notes below: 1) The ideal rep range to be using when performing the exercises mentioned is the 5ish to 10ish rep range — Choose a weight you can do for 5, 6, 7 reps @ 0-2 RIR…once you can do that weight for 8, 9, 10ish reps, increase the load by 5ish pounds 2) You should perform all reps of all the listed exercises with a controlled (but not overly slow) eccentric and an explosive (but still controlled) concentric 3) You should perform these exercises very early in your workout to ensure they are as efficient/effective as possible — If you perform them later on, you will not get as robust a growth stimulus from the sets because of the outstanding fatigue that will be present from the earlier sets/exercises in your workout Additional notes: - You may sub any of these exercises for comparable exercises due to preferences and/or equipment availability — Ex: Dip Machine subbed for Weighted Dips - I probably forgot something that I should’ve mentioned…if I think of it I’ll drop it in the post below

Dean Turner

66,141 views • 5 months ago

there are a few things i am laser focused on for 2026 and beyond. here is a brief summary for you, should you be interested in reading more. #1. The Starry Nights; - a 1/1/X series i am curating/creating which is a themed series and follow up to my edition work "la nuit étoilée". For this series, we will be offering exquisite print options with a custom and beautiful Muse Facktory unboxing experience. These will be our debut Muse Facktory prints open to the public and the moment we plant our flag as a true contender in the high caliber Fine Art world of prints. For the digital only collectors, the ultra high resolution artworks will stand on their own within your wallet, waiting for the day we have the means to exhibit our digital art properly and at scale. Each work is 12k pixels, for which we are building a custom viewport for them to be experienced properly, even on mobile. Printing, however, is something I truly enjoy, and the ChromaSculpt technique captures my layering process precisely and beautifully. Offering both is a must for this series, especially since all new works will be still jpgs. The exact quantity will be determined once i feel the series is complete, but not to exceed 1/1/111. It will be a ranked auction with settlement. This is all i can say for now. #2. curation of the servants of the Muse; As you know, i have the “servants of the Muse” collection of 69. When i began this series as a thank you token for 1/1 holders, i created as ERC721 for a reason. To one day bring about the 69 servants of the Muse, all in their true forms. 69 true 1 of 1s. DoomScroller, for example, is but one of the 69. There will be no 2 alike. All will be animated. All will serve at Her pleasure. These will of course only be available to 'servants of the Muse', who will have to pay a toll in order to reveal their servant. Toll price currently undetermined but i am no extractor so it will be reasonable. Some of these beasts and creatures and machines will be ungodly, some will be just, many will be grotesque, but all will serve. #3. Commissioned large scale aluminum sculpture Can’t speak to it beyond that at the moment. #4. Potential Installs and performances for Grand Skull Piano. #5. PROTO I - mounted digital art canvases specific for my animated works. #6. Whatever else the Muse commands. dyor

there are a few things i am laser focused on for 2026 and beyond. here is a brief summary for you, should you be interested in reading more. #1. The Starry Nights; - a 1/1/X series i am curating/creating which is a themed series and follow up to my edition work "la nuit étoilée". For this series, we will be offering exquisite print options with a custom and beautiful Muse Facktory unboxing experience. These will be our debut Muse Facktory prints open to the public and the moment we plant our flag as a true contender in the high caliber Fine Art world of prints. For the digital only collectors, the ultra high resolution artworks will stand on their own within your wallet, waiting for the day we have the means to exhibit our digital art properly and at scale. Each work is 12k pixels, for which we are building a custom viewport for them to be experienced properly, even on mobile. Printing, however, is something I truly enjoy, and the ChromaSculpt technique captures my layering process precisely and beautifully. Offering both is a must for this series, especially since all new works will be still jpgs. The exact quantity will be determined once i feel the series is complete, but not to exceed 1/1/111. It will be a ranked auction with settlement. This is all i can say for now. #2. curation of the servants of the Muse; As you know, i have the “servants of the Muse” collection of 69. When i began this series as a thank you token for 1/1 holders, i created as ERC721 for a reason. To one day bring about the 69 servants of the Muse, all in their true forms. 69 true 1 of 1s. DoomScroller, for example, is but one of the 69. There will be no 2 alike. All will be animated. All will serve at Her pleasure. These will of course only be available to 'servants of the Muse', who will have to pay a toll in order to reveal their servant. Toll price currently undetermined but i am no extractor so it will be reasonable. Some of these beasts and creatures and machines will be ungodly, some will be just, many will be grotesque, but all will serve. #3. Commissioned large scale aluminum sculpture Can’t speak to it beyond that at the moment. #4. Potential Installs and performances for Grand Skull Piano. #5. PROTO I - mounted digital art canvases specific for my animated works. #6. Whatever else the Muse commands. dyor

a.c.k.

34,506 views • 8 months ago

[the SANA UPDATES] 1/ We have updated the app to the latest version that supports Sana Card (the button will be enabled after we get the greenlight from our partner) - Android Google Play (live with standby mode button for Sana Card) - iOS (TestFlight with standby mode button for Sana Card) – (production is still in review by App Store) - Solana dApp Store (live with standby mode button for Sana Card) – Seeker | Solana Mobile 2/ We have established a partnership with M0 as our $SanaUSD stablecoin issuance partner. It will be minted on Solana and Sana Chain. 3/ We have started the Agentic Economy neobank designed for AI agents under (currently testing internally) 4/ We are exploring the use of $SANA as the gas token for any onchain transaction inside the Sana App with SVM Chain as RPC partner. We keep building with the dream from zero to billions.

[the SANA UPDATES] 1/ We have updated the app to the latest version that supports Sana Card (the button will be enabled after we get the greenlight from our partner) - Android Google Play (live with standby mode button for Sana Card) - iOS (TestFlight with standby mode button for Sana Card) – (production is still in review by App Store) - Solana dApp Store (live with standby mode button for Sana Card) – Seeker | Solana Mobile 2/ We have established a partnership with M0 as our $SanaUSD stablecoin issuance partner. It will be minted on Solana and Sana Chain. 3/ We have started the Agentic Economy neobank designed for AI agents under (currently testing internally) 4/ We are exploring the use of $SANA as the gas token for any onchain transaction inside the Sana App with SVM Chain as RPC partner. We keep building with the dream from zero to billions.

Sana Company

12,167 views • 6 months ago

🚀 Unich Network Ambassador Program: Cycle Update! Our weekly training cycles will run from Tuesday to Tuesday - but we are making a special update for our very first Batch! To give everyone enough time to apply and get fully comfortable with the program's workflow, Batch 1 will be extended! 🗓️ Batch 1 Schedule: April 8 – April 21 📢 Participant: We will announce the official list of Batch 1 participants next Tuesday, April 14. (Note: If you join the program after April 14, don't worry! You will automatically be enrolled in Batch 2, which officially kicks off on April 22). ⏳ Haven't registered yet? You still have time to join the movement! 👇 ✅ Step 1: Join the Unich Network Ambassador Global group: ✅ Step 2: Fill out the quick registration form: Let’s build the future of the Unich Network ecosystem together! 🌐💪

🚀 Unich Network Ambassador Program: Cycle Update! Our weekly training cycles will run from Tuesday to Tuesday - but we are making a special update for our very first Batch! To give everyone enough time to apply and get fully comfortable with the program's workflow, Batch 1 will be extended! 🗓️ Batch 1 Schedule: April 8 – April 21 📢 Participant: We will announce the official list of Batch 1 participants next Tuesday, April 14. (Note: If you join the program after April 14, don't worry! You will automatically be enrolled in Batch 2, which officially kicks off on April 22). ⏳ Haven't registered yet? You still have time to join the movement! 👇 ✅ Step 1: Join the Unich Network Ambassador Global group: ✅ Step 2: Fill out the quick registration form: Let’s build the future of the Unich Network ecosystem together! 🌐💪

Unich.com 🆓

36,906 views • 4 months ago

Microsoft is testing a new feature in Windows 11 called Low Latency Profile that gives a short boost to your CPU for 1 to 3 seconds when you open apps or menus. Early tests show Microsoft apps like Edge and Outlook open up to 40% faster, while the Start menu and other menus can load up to 70% faster, with CPU use jumping high for a few seconds then dropping right back down. Microsoft says this is normal because Apple does it in macOS and Linux, plus phones use the same type of quick CPU boosts for better speed. The feature is only in early Insider testing now, so it is not out for everyone yet.

Pirat_Nation 🔴

145,459 views • 3 months ago