Video yükleniyor...

Video Yüklenemedi

Ana Sayfaya Dön

I have done it ✅😎😂 The Engine has been fixed and it now runs on afterburner mode🔥, exactly like a fighter jet engine🚀. I repeat, in all humility, I am the first person in Nigeria 🇳🇬 & probably Africa to build a functional self sustaining & afterburning turbojet engine...

zikohercules's profile picture

Ziko Abara

25,141 subscribers

2,183,197 görüntüleme • 1 yıl önce •via X (Twitter)

Bilim & Teknoloji
LIVE

Anya Rossi• Live Now

Private livecam show

10 Yorum

Obinna profil fotoğrafı
Obinna1 yıl önce

Congrats. That guy no one hear stories that touch, it's better to observe from distance 😀

Ziko Abara profil fotoğrafı
Ziko Abara1 yıl önce

🤣🤣🤣

Morris Monye profil fotoğrafı
Morris Monye1 yıl önce

This is great. Well done. You have been consistent.

Ziko Abara profil fotoğrafı
Ziko Abara1 yıl önce

Thank you chief Morris 🙏🏻

servant of Allah profil fotoğrafı
servant of Allah1 yıl önce

Congratulations Rocketman. If you permit me and avail me your contact details, I'd like to link you up with the Defence Research And Developmemt Bureau (DRDB), your genius would serve the Fatherland and our Armed Forces. Congratulations once again, our very own #RocketMan 🫡🇳🇬🫡

Ziko Abara profil fotoğrafı
Ziko Abara1 yıl önce

DRDB✅...affiliated

Sucre Papito 01 profil fotoğrafı
Sucre Papito 011 yıl önce

Congratulations to you. This means someday Nigeria is going to have her own home built fighter jets.

Ziko Abara profil fotoğrafı
Ziko Abara1 yıl önce

Hopefully

Jeffrey Peterson profil fotoğrafı
Jeffrey Peterson1 yıl önce

This is truly amazing. Congrats to you!

Ziko Abara profil fotoğrafı
Ziko Abara1 yıl önce

Thank you 🙌🏻

Benzer Videolar

Impromptu test on the Mark3 turbojet engine😎😂: The Ear Muffs are arriving next week, but again, I couldn't hold back but to run the engine at mild power today😂. I am probably the first person in Nigeria 🇳🇬 & probably all of Africa to build a self sustaining turbojet engine 🔥🤔, please correct me if I am wrong tho🙏🏻, but I doubt. Incase u don't know what a turbojet engine is, it is the engine that powers most fighter jets🚀. The engine is self sustaining because once it gets to idle speed, it runs at about 35,000 RPM on its own without the starter motor & batteries, and can only be shut down if the fuel supply is shut off, as demonstrated by my assistant in the clips. We will do a full power test with the afterburner next week when the ear Muffs arrive😎, so we don't go deaf🤣😂. We built this beast in Ebonyi State, Nigeria 🛠️⚡️ #Zedora #madeinEbonyi #madeinNigeria 🇳🇬
2:09

Impromptu test on the Mark3 turbojet engine😎😂: The Ear Muffs are arriving next week, but again, I couldn't hold back but to run the engine at mild power today😂. I am probably the first person in Nigeria 🇳🇬 & probably all of Africa to build a self sustaining turbojet engine 🔥🤔, please correct me if I am wrong tho🙏🏻, but I doubt. Incase u don't know what a turbojet engine is, it is the engine that powers most fighter jets🚀. The engine is self sustaining because once it gets to idle speed, it runs at about 35,000 RPM on its own without the starter motor & batteries, and can only be shut down if the fuel supply is shut off, as demonstrated by my assistant in the clips. We will do a full power test with the afterburner next week when the ear Muffs arrive😎, so we don't go deaf🤣😂. We built this beast in Ebonyi State, Nigeria 🛠️⚡️ #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

626,591 görüntüleme • 1 yıl önce

I have compiled all footage from the development of our indigenous turbojet engine program so far, from the Mark1 & Mark2 models which failed❌, to the Mark3 model which has been a huge success✅🔥. I actually cried a bit watching this video to the end (yes I'm 'a war' 😤, but I'm not ashamed to admit). Join me in reminiscing on the journey so far. I failed twice, but I never stopped trying...Never give up🚀. To greater things 🥂 #Zedora #madeinEbonyi #madeinNigeria 🇳🇬
3:14

I have compiled all footage from the development of our indigenous turbojet engine program so far, from the Mark1 & Mark2 models which failed❌, to the Mark3 model which has been a huge success✅🔥. I actually cried a bit watching this video to the end (yes I'm 'a war' 😤, but I'm not ashamed to admit). Join me in reminiscing on the journey so far. I failed twice, but I never stopped trying...Never give up🚀. To greater things 🥂 #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

206,936 görüntüleme • 1 yıl önce

Jet engine Thrust test✅🔥🚀: Finally we have the data we need, at 100% throttle alone, the engine generated thrust of 7.2KG to 7.8KG (76.5 Newtons) At 100% throttle plus Afterburner it soared to 14KG to 16KG, I saw it peak at 18KG, but we'll take the average at 16KG thrust (157 Newtons) For this scale & build, I am a bit satisfied with the performance, although if I ditch the cooling design on the exhaust the thrust will increase significantly, but the exhaust will glow red hot, so we had to trade some thrust for better cooling for the engine. All the same, I am satisfied with the engine performance at this scale. I look forward to our runway tests⚡️ #Zedora #madeinEbonyi #madeinNigeria 🇳🇬
1:35

Jet engine Thrust test✅🔥🚀: Finally we have the data we need, at 100% throttle alone, the engine generated thrust of 7.2KG to 7.8KG (76.5 Newtons) At 100% throttle plus Afterburner it soared to 14KG to 16KG, I saw it peak at 18KG, but we'll take the average at 16KG thrust (157 Newtons) For this scale & build, I am a bit satisfied with the performance, although if I ditch the cooling design on the exhaust the thrust will increase significantly, but the exhaust will glow red hot, so we had to trade some thrust for better cooling for the engine. All the same, I am satisfied with the engine performance at this scale. I look forward to our runway tests⚡️ #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

32,518 görüntüleme • 1 yıl önce

Our little taxi test on the new build✅ I must admit I am very happy today, the acceleration was indeed a sight to behold, now imagine the top speed on the runway. we took data from the last runway tests & implemented many changes, the entire frame now weighs about 50kg It can be lighter, but I'm working with the resources & materials available to me The tyres are more balanced, aligned & stable The engine ran at 94,000 rpm at full throttle and still has extra 16,000rpm to deliver if I want, meaning more power, although it's danger limit is going above that. The wings currently have relatively flat aerofoil due to complexities in aluminum metal fabrication and weight management. I am still having issues with the Afterburner system, it's difficult to start and often gets blown off when the engine nears full throttle, I will review the sequence design again and make sure we harness the full power of the Afterburner. As u see, I'm also using the manual controls, the remote control unit is also undergoing upgrades Thanks for all the support and encouragement, may God bless us all #Zedora #madeinEbonyi #madeinNigeria 🇳🇬
1:58

Our little taxi test on the new build✅ I must admit I am very happy today, the acceleration was indeed a sight to behold, now imagine the top speed on the runway. we took data from the last runway tests & implemented many changes, the entire frame now weighs about 50kg It can be lighter, but I'm working with the resources & materials available to me The tyres are more balanced, aligned & stable The engine ran at 94,000 rpm at full throttle and still has extra 16,000rpm to deliver if I want, meaning more power, although it's danger limit is going above that. The wings currently have relatively flat aerofoil due to complexities in aluminum metal fabrication and weight management. I am still having issues with the Afterburner system, it's difficult to start and often gets blown off when the engine nears full throttle, I will review the sequence design again and make sure we harness the full power of the Afterburner. As u see, I'm also using the manual controls, the remote control unit is also undergoing upgrades Thanks for all the support and encouragement, may God bless us all #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

139,715 görüntüleme • 9 ay önce

Taxi test on the Jet engine ⚡️: The engine runs so cool❄️ (EGT 680-800*C) except on prolonged afterburner🔥 use which takes EGT to about 1000*C⚠️ We switched to testing Diesel as fuel & honestly I think I prefer Diesel to kerosene 🤔. Maybe I'll test actual Jet-A1 too Afterburner🔥 mode wanted to send the test bed flying, so we had to abort that and run the taxi test on normal mode at 40-50% throttle. Thrust levels are really excellent, I just wonder how fast this will be at full power plus full afterburner 🔥. We literally built an air breathing rocket engine 🤣. Honestly, I am happy again, the breakdown of this project for weeks took my joy away, I was always sad and down, but hell bent on solving the problems. Next is to build the remote control system so we can unleash the full power of the Jet engine in a long runway from a safe distance. #Zedora #madeinEbonyi #madeinNigeria 🇳🇬
2:20

Taxi test on the Jet engine ⚡️: The engine runs so cool❄️ (EGT 680-800*C) except on prolonged afterburner🔥 use which takes EGT to about 1000*C⚠️ We switched to testing Diesel as fuel & honestly I think I prefer Diesel to kerosene 🤔. Maybe I'll test actual Jet-A1 too Afterburner🔥 mode wanted to send the test bed flying, so we had to abort that and run the taxi test on normal mode at 40-50% throttle. Thrust levels are really excellent, I just wonder how fast this will be at full power plus full afterburner 🔥. We literally built an air breathing rocket engine 🤣. Honestly, I am happy again, the breakdown of this project for weeks took my joy away, I was always sad and down, but hell bent on solving the problems. Next is to build the remote control system so we can unleash the full power of the Jet engine in a long runway from a safe distance. #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

29,144 görüntüleme • 1 yıl önce

Good news on the jet engine project ✅: I redesigned the exhaust system again to prioritize cooling, thrust & the afterburner sequence all together, it now works better✅, no red hot situation on the exhaust at all✅ The new design also reduces pressure on the turbine on AB mode✅ This test was done with gas for the main engine running at 50% power, then liquid kerosene for the AB🔥. I wish to change the fuel nozzles on the main burner to a more powerful one next week, then we'll do this test again close to 100% power which will be louder & much more violent ⚡️ After that, we'll go straight to a runway & let this beast run🚀 #Zedora #madeinEbonyi 🇳🇬
2:45

Good news on the jet engine project ✅: I redesigned the exhaust system again to prioritize cooling, thrust & the afterburner sequence all together, it now works better✅, no red hot situation on the exhaust at all✅ The new design also reduces pressure on the turbine on AB mode✅ This test was done with gas for the main engine running at 50% power, then liquid kerosene for the AB🔥. I wish to change the fuel nozzles on the main burner to a more powerful one next week, then we'll do this test again close to 100% power which will be louder & much more violent ⚡️ After that, we'll go straight to a runway & let this beast run🚀 #Zedora #madeinEbonyi 🇳🇬

Ziko Abara

22,396 görüntüleme • 1 yıl önce

Some pple think we came here to play, lmao🤣 I am almost done with the system design for the first application of our turbojet engine prototype 🔥. 'Build in silence' advocates abeg make una no vex🥲, I like to build in public, so everyone learns & understands how challenging it is to do the things we do, also to prove the originality of our ingenuity & hard work✅. I can't just wake up to tell you I've built a starship🚀, u will follow the process from scratch 🛠 Stay tuned as we build great things..........together 🔥 #Zedora
2:13

Some pple think we came here to play, lmao🤣 I am almost done with the system design for the first application of our turbojet engine prototype 🔥. 'Build in silence' advocates abeg make una no vex🥲, I like to build in public, so everyone learns & understands how challenging it is to do the things we do, also to prove the originality of our ingenuity & hard work✅. I can't just wake up to tell you I've built a starship🚀, u will follow the process from scratch 🛠 Stay tuned as we build great things..........together 🔥 #Zedora

Ziko Abara

66,191 görüntüleme • 1 yıl önce

Good news and bad news 😖🤧: Hello guys, in the spirit of transparency, I have good news & bad news on the attempt on full power tests on the mark3 prototype. The bad news is, the driving motor shaft developed a critical fault & therefore we could not reach high speeds for the engine to self sustain to idle as before🤦🏻‍♂️, the shaft eventually broke off as shown in the video❌. The good news is, our afterburner sequence works✅✅ even below self sustaining speeds, I decided to activate it at this low power level & it worked 🔥, although at full power it would be more violent & streamlined in nature, the sun's glare also made the flames less visible. We will fix the motor damage & try full power testing again next week 🙌🏻. I am not giving up, we are not giving up ⚠️, we are almost there, full power or nothing 🚀 Thank you for the kindness and support, I appreciate you all, we will fix the anomaly & test again. I feel very sad but goodnight 🙏🏻 #Zedora
1:20

Good news and bad news 😖🤧: Hello guys, in the spirit of transparency, I have good news & bad news on the attempt on full power tests on the mark3 prototype. The bad news is, the driving motor shaft developed a critical fault & therefore we could not reach high speeds for the engine to self sustain to idle as before🤦🏻‍♂️, the shaft eventually broke off as shown in the video❌. The good news is, our afterburner sequence works✅✅ even below self sustaining speeds, I decided to activate it at this low power level & it worked 🔥, although at full power it would be more violent & streamlined in nature, the sun's glare also made the flames less visible. We will fix the motor damage & try full power testing again next week 🙌🏻. I am not giving up, we are not giving up ⚠️, we are almost there, full power or nothing 🚀 Thank you for the kindness and support, I appreciate you all, we will fix the anomaly & test again. I feel very sad but goodnight 🙏🏻 #Zedora

Ziko Abara

111,756 görüntüleme • 1 yıl önce

The greatest test video so far🔥: Guys Make sure you retweet this 🙏🏻 The engine sent the test bed flying & I had to stop it b4 it crashes into the fence😂, subsequently brushing me down, imagine the force it took to brush me, fully loaded with fuel, the test bed weighs about 48KG⚠️. The control systems are yet to arrive, soon we will control the test bed remotely 😅. This was not even full power, imagine I activated the afterburner, this thing might do up to 200+ km per hour o👀👀👀. We need a runway for a full power test🤧. I will be applying to the government of Ebonyi State for permission to use a runway at the state airport for full power tests on the project, it has grown beyond my compound 🙏🏻. I am going to get some pepper soup to celebrate this milestone🤧, thank you all for the endless support. We will keep making history, together ✊🏻 #Zedora #madeinEbonyi #madeinNigeria 🇳🇬
0:54

The greatest test video so far🔥: Guys Make sure you retweet this 🙏🏻 The engine sent the test bed flying & I had to stop it b4 it crashes into the fence😂, subsequently brushing me down, imagine the force it took to brush me, fully loaded with fuel, the test bed weighs about 48KG⚠️. The control systems are yet to arrive, soon we will control the test bed remotely 😅. This was not even full power, imagine I activated the afterburner, this thing might do up to 200+ km per hour o👀👀👀. We need a runway for a full power test🤧. I will be applying to the government of Ebonyi State for permission to use a runway at the state airport for full power tests on the project, it has grown beyond my compound 🙏🏻. I am going to get some pepper soup to celebrate this milestone🤧, thank you all for the endless support. We will keep making history, together ✊🏻 #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

106,550 görüntüleme • 1 yıl önce

Burn test on the Jet engine prototype 🔥 : ⚠️apologies for skipping my PPE🥲, I was just moved by heavy enthusiasm. My modifications have made the engine even more powerful, see the supersonic exhaust gas flow even without the AFTERBURNER 👀🔥, once it's starts to overcharge I ask my brother to shutdown fuel supply (Engr. Idam my assistant wasn't available), the increase in power also resulted in an increase in temperature, as u can see the materials used to build the engine are being stressed to their metallurgical limits quickly🛠. Equipment to measure all the metrics accurately are still on the way, I will still need to work on the design, especially to enhance cooling on the engine while I work on getting more advanced thermally stable materials to upgrade the system for long operating times. There's more to come ✊🏻 #Zedora 🇳🇬
1:19

Burn test on the Jet engine prototype 🔥 : ⚠️apologies for skipping my PPE🥲, I was just moved by heavy enthusiasm. My modifications have made the engine even more powerful, see the supersonic exhaust gas flow even without the AFTERBURNER 👀🔥, once it's starts to overcharge I ask my brother to shutdown fuel supply (Engr. Idam my assistant wasn't available), the increase in power also resulted in an increase in temperature, as u can see the materials used to build the engine are being stressed to their metallurgical limits quickly🛠. Equipment to measure all the metrics accurately are still on the way, I will still need to work on the design, especially to enhance cooling on the engine while I work on getting more advanced thermally stable materials to upgrade the system for long operating times. There's more to come ✊🏻 #Zedora 🇳🇬

Ziko Abara

36,123 görüntüleme • 1 yıl önce

A controlled taxi test on the jet engine test bed prototype. Giving u a glimpse of what the runway test may look like. Never forget, that Whatever the white man can do, we can do same, or even better, all we need, is willpower, and a war chest of resources ⚡️ The black man is NOT inferior to the white man ⚠️, we are capable of building great things too. This test was done at mild engine power, apologies for the lack of PPE, I didn't just have the strength to go upstairs and get em🤦🏻‍♂️, I'm still in recovery, not working at full capacity, plus it was impromptu, borne out of me missing the jet engine for so long #Zedora #madeinEbonyi #madeinNigeria 🇳🇬
1:39

A controlled taxi test on the jet engine test bed prototype. Giving u a glimpse of what the runway test may look like. Never forget, that Whatever the white man can do, we can do same, or even better, all we need, is willpower, and a war chest of resources ⚡️ The black man is NOT inferior to the white man ⚠️, we are capable of building great things too. This test was done at mild engine power, apologies for the lack of PPE, I didn't just have the strength to go upstairs and get em🤦🏻‍♂️, I'm still in recovery, not working at full capacity, plus it was impromptu, borne out of me missing the jet engine for so long #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

33,878 görüntüleme • 1 yıl önce

Grateful to the “Best Classmates of China” from CKGSB for their unwavering support to both FF and me. I also feel a deep sense of responsibility — and even guilt — because we have not yet achieved the success everyone hoped for. After more than a decade of entrepreneurship in the U.S., I am still on the journey. I will never give up. I will continue pushing forward with everything I have to make FF’s EAI Dual-Engine Strategy a success — to repay the trust of our C6 classmates and everyone who has supported us. #BestClassmatesOfChina
5:28

Grateful to the “Best Classmates of China” from CKGSB for their unwavering support to both FF and me. I also feel a deep sense of responsibility — and even guilt — because we have not yet achieved the success everyone hoped for. After more than a decade of entrepreneurship in the U.S., I am still on the journey. I will never give up. I will continue pushing forward with everything I have to make FF’s EAI Dual-Engine Strategy a success — to repay the trust of our C6 classmates and everyone who has supported us. #BestClassmatesOfChina

YT Jia 贾跃亭

14,847 görüntüleme • 5 ay önce

Honestly, We would have done more than 1hr of runtime, but we ran out of fuel (kerosene)🤣..... I wrestled with the jet just to show u it's raw power Exhaust Gas Temperature never exceeded 660 degrees Celsius Now, I can focus on rebuilding the control system/brainbox I dey try abeg🤧, I deserve to eat some goat meat pepper soup tonight🤣 Thank you my people, y'all keep me going on this project, I am grateful for u all I am just here to do my thing & make a difference, I do not really care about any recognition This is our project 🔥 #Zedora #madeinNigeria 🇳🇬
1:41

Honestly, We would have done more than 1hr of runtime, but we ran out of fuel (kerosene)🤣..... I wrestled with the jet just to show u it's raw power Exhaust Gas Temperature never exceeded 660 degrees Celsius Now, I can focus on rebuilding the control system/brainbox I dey try abeg🤧, I deserve to eat some goat meat pepper soup tonight🤣 Thank you my people, y'all keep me going on this project, I am grateful for u all I am just here to do my thing & make a difference, I do not really care about any recognition This is our project 🔥 #Zedora #madeinNigeria 🇳🇬

Ziko Abara

620,331 görüntüleme • 8 ay önce