I learned something useful!

That would take forever. How about just adjusting your miter saw to 45°, lock it and cut it?

Or you could just set your blade to 45° or use a mitre box

This right here is the part where it's not a "hack". You're eyeballing this angle, and it you get it even slightly wrong, they won't fit. Like someone else said, just use a 45º miter saw.

I'm sorry, markers don't cut through wood like that. this is fake and gay.

It's just showing that's where they cut. It's an interpretation. Don't think too hard!

But he didn't cut it, is he so strong that he was able to just pull it apart perfectly?

@lynnek2005 You seem bright

@lynnek2005 Brighter than Sagittarius A

Why are you putting skirting board on the outside of your house?

If you're joining the other ends of each piece you can't do this because now they are too short. Show me the other ends now?

🤣🤣🤣

This would work good when you corners aren't exactly ninety degrees.

This is not a method a carpenter would use. When you turn the pieces over and mark them with a straight edge across the corner, there's no guarantee both pieces are 45 degrees, in fact, one could easily be a different angle from the other,

Thank you!

Now it’s short in the other end. Awesome

thats long its 45o just use a protractor

Why not just cut a 45? You also aren’t going to be able to do this on a closed end

This is actually a pretty bad idea. Bricks are never straight, and most floors to walls are imperfect. The flipped cut is going to exaggerate imperfections and make a terrible mismatch.

I wanna see how homie cut that. By hand or by miter lol

These videos have legit been online since dial up.

@One_Way_Home

🤦‍♂️🤦‍♂️

Elles me dégoûtent ces vidéos mdrr

What in the wild world of bots is going on here?

Nope

keren banget sih

WOW !!!!!

Video would've been handy when I made a pigs ear of our skirting 💀

Put your chop saw at 45

I went to Lowes and asked for a red marker that replaces a saw but they just laughed at me. Do you have a link?

Just set the table saw to 45 degrees, and cut each end. Bunch of retards.

Wow great!

Thank you!.

Very good

@MAGA_X_Times Now on a cornice? Those 45 angels from wall to roof Did my head in.

Or just set your cut angle at 45 degrees

This only works if the initial line hits 45 degrees, and the guy just eyeballs it. Better use a proper trimming saw with adjustable angles.

learning is easy, turning it into something you ship weekly is hard