Загрузка видео...

Не удалось загрузить видео

На главную

Most robotics teams can make a robot move… very few can make it work every day in the real world! @roboforce_inc was just featured in Jensen Huang’s GTC keynote, not for a demo but for a robot they claim is already working in the field. Their system, TITAN, is...

IlirAliu_'s profile picture

Ilir Aliu

26,348 subscribers

27,741 просмотров • 8 месяцев назад •via X (Twitter)

Новости и политикаЗдоровье и велнесНаука и технологии
LIVE

Anya Rossi• Live Now

Private livecam show

Комментарии: 0

Нет доступных комментариев

Здесь появятся комментарии из оригинального поста

Похожие видео

Humanoid robots are cool. But most of them aren’t ready for real-world work. X-Humanoid just launched Embodied Tien Kung 3.0 - a full-size humanoid robot built to actually operate in industrial and commercial environments. What makes it different? • Strong, high-torque joints for heavy tasks • Can move dynamically and stay stable • Handles complex motions (even over obstacles) • Millimeter-level precision for detailed work It runs on the Wise KaiWu AI platform, which allows the robot to see, think, and act in a continuous loop with less human control and support for multi-robot collaboration. It also supports ROS2, MQTT, and TCP/IP, and offers more open hardware + software interfaces to make development easier for teams. The goal is simple: make humanoid robots practical, easier to build on, and ready for real-world use. Visit: Check out the official launch video below to see what it can do! 👇 #Robotics #HumanoidRobot #AI
2:18

Humanoid robots are cool. But most of them aren’t ready for real-world work. X-Humanoid just launched Embodied Tien Kung 3.0 - a full-size humanoid robot built to actually operate in industrial and commercial environments. What makes it different? • Strong, high-torque joints for heavy tasks • Can move dynamically and stay stable • Handles complex motions (even over obstacles) • Millimeter-level precision for detailed work It runs on the Wise KaiWu AI platform, which allows the robot to see, think, and act in a continuous loop with less human control and support for multi-robot collaboration. It also supports ROS2, MQTT, and TCP/IP, and offers more open hardware + software interfaces to make development easier for teams. The goal is simple: make humanoid robots practical, easier to build on, and ready for real-world use. Visit: Check out the official launch video below to see what it can do! 👇 #Robotics #HumanoidRobot #AI

Chidanand Tripathi

69,604 просмотров • 4 месяцев назад

Humanoid robots are taking over the largest robotics and AI show in America. Grady Trimble got an inside look at the robot family stealing the show and how they are being used in the real world. "AI is enabling robots to do all kinds of work, stuff like this, and hospitals, in factories, in warehouses... It's not just entertainment," President of the the Association for Advancing Automation Jeff Burnstein says.
1:58

Humanoid robots are taking over the largest robotics and AI show in America. Grady Trimble got an inside look at the robot family stealing the show and how they are being used in the real world. "AI is enabling robots to do all kinds of work, stuff like this, and hospitals, in factories, in warehouses... It's not just entertainment," President of the the Association for Advancing Automation Jeff Burnstein says.

FOX Business

15,003 просмотров • 24 дней назад

Meet Axol: a dual-arm robot designed for teams working with physical AI. Made in America. Axol is for builders who believe robots should work, in the real world, not just staged environments, and that the future of physical AI should be open not closed.
2:22

Meet Axol: a dual-arm robot designed for teams working with physical AI. Made in America. Axol is for builders who believe robots should work, in the real world, not just staged environments, and that the future of physical AI should be open not closed.

Saba Khalilnaji

57,015 просмотров • 1 месяц назад

Sundar Pichai on the robotics opportunity: ⦿ He's impressed by recent humanoid progress - so much so that he sometimes has to look closely to tell if a robot video is real or fake. ⦿ Google initially moved too early into the application layer, but now sees the combination of AI and robotics as the “sweet spot.” ⦿ He believes we’re 2–3 years away from a “magical moment” in robotics. ⦿ Google is working on playing a role similar to Android in robotics - one of its internal bets is already focused on supporting robotics manufacturers. ⦿ Gemini robotics models will work very well - how to productize them is still an open question at the company.
2:43

Sundar Pichai on the robotics opportunity: ⦿ He's impressed by recent humanoid progress - so much so that he sometimes has to look closely to tell if a robot video is real or fake. ⦿ Google initially moved too early into the application layer, but now sees the combination of AI and robotics as the “sweet spot.” ⦿ He believes we’re 2–3 years away from a “magical moment” in robotics. ⦿ Google is working on playing a role similar to Android in robotics - one of its internal bets is already focused on supporting robotics manufacturers. ⦿ Gemini robotics models will work very well - how to productize them is still an open question at the company.

The Humanoid Hub

87,088 просмотров • 1 год назад

Another win for open-source robotics! 🔥 Hugging Face just released a fully open-source humanoid robot, and you can build one for $2,500. I'm a huge advocate of open-source in robotics space. Why? Robotics is too hard to solve alone. So lowering the entry point is crucial. Also, ROS proved open ecosystems create lasting industry standards. So let's have a look at the new member of humanoids family! LeRobot Humanoid is a 3D-printed, bipedal humanoid platform designed for real robot learning experiments. It's a complete and, buildable robot Anddddd yes, it's a full stack release: → Hardware files, bill of materials and full assembly documentation → Simulation assets and training environments → Runtime tools for calibration and real-world control → Sim-to-real identification pipeline When a part breaks, reprint it. When a design choice doesn't work, modify it and test again. The whole point is fast iteration on real hardware, not treating the robot as a fixed artefact. The timing is not a coincidence. As foundation models for robotics mature, the field desperately needs open physical platforms to train, validate and deploy them on. clem 🤗 LET'S GO!!! Build it here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:20

Another win for open-source robotics! 🔥 Hugging Face just released a fully open-source humanoid robot, and you can build one for $2,500. I'm a huge advocate of open-source in robotics space. Why? Robotics is too hard to solve alone. So lowering the entry point is crucial. Also, ROS proved open ecosystems create lasting industry standards. So let's have a look at the new member of humanoids family! LeRobot Humanoid is a 3D-printed, bipedal humanoid platform designed for real robot learning experiments. It's a complete and, buildable robot Anddddd yes, it's a full stack release: → Hardware files, bill of materials and full assembly documentation → Simulation assets and training environments → Runtime tools for calibration and real-world control → Sim-to-real identification pipeline When a part breaks, reprint it. When a design choice doesn't work, modify it and test again. The whole point is fast iteration on real hardware, not treating the robot as a fixed artefact. The timing is not a coincidence. As foundation models for robotics mature, the field desperately needs open physical platforms to train, validate and deploy them on. clem 🤗 LET'S GO!!! Build it here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

20,361 просмотров • 1 месяц назад

China's humanoid robotics market is on fire. With orders expected to top 30,000 units this year—a tenfold jump from 2024's total of less than 3,000—2025 is officially shaping up to be the "Year of Mass Production." This surge, driven by an expansion into new sectors like industrial manufacturing, logistics, and elder care, is reflected in a wave of new deals across the industry. Here's a look at some of the key commercial progress: Astribot: A 1,000-unit order for industrial and logistics deployment over two years. TianTai Robotics: Signed a major 10,000-unit order for caregiving robots. Noetix Robotics : Received over 2,000 intent orders in one month, valued at over 100 million yuan, with a focus on education and commercial performances. AgiBot: Expects to ship thousands of units this year and tens of thousands in 2026. Unitree Robotics: Has orders for thousands of units and is one of the most visible products in the industry. UBTech: Aims to deliver 500 industrial humanoids in 2025, with educational robot orders already exceeding 300 units. Robot Era: Delivered over 300 units by July 2025 with 500 more on hand. TLIBOT: Has around 1,000 intent orders. Galbot: Secured orders for its supermarket security robot, Galbot, in 100 stores. AI² Robotics: Has nearly 500 orders for its general-purpose robots for industrial and public service scenarios. But here’s the crucial reality check. While the order boom is exciting, it doesn't automatically translate to fulfilled deliveries. Many companies lack the production capacity to keep up. A significant portion of these are "intent orders" or framework agreements, not guaranteed sales. Furthermore, the market is heavily B2B-focused, with consumer demand representing only about 5% of sales. Some orders are even symbolic, for public relations or strategic purposes. This “order frenzy” is a starting point, not the finish line. The true test for China's humanoid robot industry isn't who can secure the biggest order, but who can consistently deliver on it and build a stable market for the future.
2:44

China's humanoid robotics market is on fire. With orders expected to top 30,000 units this year—a tenfold jump from 2024's total of less than 3,000—2025 is officially shaping up to be the "Year of Mass Production." This surge, driven by an expansion into new sectors like industrial manufacturing, logistics, and elder care, is reflected in a wave of new deals across the industry. Here's a look at some of the key commercial progress: Astribot: A 1,000-unit order for industrial and logistics deployment over two years. TianTai Robotics: Signed a major 10,000-unit order for caregiving robots. Noetix Robotics : Received over 2,000 intent orders in one month, valued at over 100 million yuan, with a focus on education and commercial performances. AgiBot: Expects to ship thousands of units this year and tens of thousands in 2026. Unitree Robotics: Has orders for thousands of units and is one of the most visible products in the industry. UBTech: Aims to deliver 500 industrial humanoids in 2025, with educational robot orders already exceeding 300 units. Robot Era: Delivered over 300 units by July 2025 with 500 more on hand. TLIBOT: Has around 1,000 intent orders. Galbot: Secured orders for its supermarket security robot, Galbot, in 100 stores. AI² Robotics: Has nearly 500 orders for its general-purpose robots for industrial and public service scenarios. But here’s the crucial reality check. While the order boom is exciting, it doesn't automatically translate to fulfilled deliveries. Many companies lack the production capacity to keep up. A significant portion of these are "intent orders" or framework agreements, not guaranteed sales. Furthermore, the market is heavily B2B-focused, with consumer demand representing only about 5% of sales. Some orders are even symbolic, for public relations or strategic purposes. This “order frenzy” is a starting point, not the finish line. The true test for China's humanoid robot industry isn't who can secure the biggest order, but who can consistently deliver on it and build a stable market for the future.

RoboHub🤖

199,146 просмотров • 10 месяцев назад

NAVIAI-I3, a more robust humanoid robot, was launched by the Zhejiang Humanoid Robotics Innovation Center. Standing 1.8 meters tall, it can run like a human and walk on various terrains. This humanoid robot appears to be primarily designed for specialized industrial tasks, such as security patrols in underground parking lots. They previously launched the lightweight bipedal NVAI-2 and a wheeled humanoid robot. The bipedal robot is used in manufacturing operations, while the wheeled humanoid robot is used for unstructured, flexible tasks such as warehouse sorting, supermarket shelving, and office cleaning. We filmed this demonstration at the World Robot Conference; you can see it in the comments section.
1:00

NAVIAI-I3, a more robust humanoid robot, was launched by the Zhejiang Humanoid Robotics Innovation Center. Standing 1.8 meters tall, it can run like a human and walk on various terrains. This humanoid robot appears to be primarily designed for specialized industrial tasks, such as security patrols in underground parking lots. They previously launched the lightweight bipedal NVAI-2 and a wheeled humanoid robot. The bipedal robot is used in manufacturing operations, while the wheeled humanoid robot is used for unstructured, flexible tasks such as warehouse sorting, supermarket shelving, and office cleaning. We filmed this demonstration at the World Robot Conference; you can see it in the comments section.

CyberRobo

15,521 просмотров • 8 месяцев назад

2. NVIDIA is building the GPT of humanoid robots. They just launched Isaac GR00T N1.5 - a foundation model for general purpose robotics. Here’s how it works: → A human demos the task once → Cosmos (their physics AI model) generates 1,000s of variations → Omniverse simulates the motions in high fidelity → The robot trains entirely in simulation → Then fine-tunes itself in the real world Robots can now learn general skills across tasks, tools, even body types with just one human demo. AI isn’t just thinking in text anymore. It’s perceiving. Reasoning. Moving. Physical AI is here and it’s training itself.
2:21

2. NVIDIA is building the GPT of humanoid robots. They just launched Isaac GR00T N1.5 - a foundation model for general purpose robotics. Here’s how it works: → A human demos the task once → Cosmos (their physics AI model) generates 1,000s of variations → Omniverse simulates the motions in high fidelity → The robot trains entirely in simulation → Then fine-tunes itself in the real world Robots can now learn general skills across tasks, tools, even body types with just one human demo. AI isn’t just thinking in text anymore. It’s perceiving. Reasoning. Moving. Physical AI is here and it’s training itself.

Shruti

70,359 просмотров • 1 год назад

Jensen Huang on Elon’s vision for humanoid robots: Elon has said there could eventually be one humanoid robot for every person Jensen Huang’s response? “I’m hoping more” He believes even that estimate may be too conservative “There’s going to be a whole bunch of robots in factories working around the clock” “Almost everything will be robotic” Today, the world is already facing a massive labor shortage “We’re millions of people short in labor today. We are desperate for robotics so companies can grow” This isn’t just about replacing repetitive work It’s about enabling industries to scale beyond the limits of human labor The robot revolution won’t be measured in millions It will likely be measured in billions
1:06

Jensen Huang on Elon’s vision for humanoid robots: Elon has said there could eventually be one humanoid robot for every person Jensen Huang’s response? “I’m hoping more” He believes even that estimate may be too conservative “There’s going to be a whole bunch of robots in factories working around the clock” “Almost everything will be robotic” Today, the world is already facing a massive labor shortage “We’re millions of people short in labor today. We are desperate for robotics so companies can grow” This isn’t just about replacing repetitive work It’s about enabling industries to scale beyond the limits of human labor The robot revolution won’t be measured in millions It will likely be measured in billions

X Freeze

719,932 просмотров • 27 дней назад

An ultra compact, high precision industrial robot arm. This one stood out to me because it targets a part of automation that is usually glossed over. Extreme precision in very small spaces. According to Oleksandr Stepanenko, the arm is designed from the ground up with fully custom electronics, software, and calibration, paired with industrial components from Harmonic Drive and maxon. Reported specs are notable: • Repeatability better than 0.001 mm • Payload 250 g • Reach 250 mm • Total mass 1.5 kg This kind of form factor opens up use cases that traditional industrial arms struggle with. Think PCB assembly, micro soldering, precision pick and place of irregular parts, and medical or micro robotics components. ❗️What I find interesting is not just the numbers, but the direction… Smaller, lighter, highly precise systems could unlock automation in environments where space, inertia, and tolerance are the real constraints. Credit to Oleksandr Stepanenko for the original work and post. —- Weekly robotics and AI insights. Subscribe free:
0:43

An ultra compact, high precision industrial robot arm. This one stood out to me because it targets a part of automation that is usually glossed over. Extreme precision in very small spaces. According to Oleksandr Stepanenko, the arm is designed from the ground up with fully custom electronics, software, and calibration, paired with industrial components from Harmonic Drive and maxon. Reported specs are notable: • Repeatability better than 0.001 mm • Payload 250 g • Reach 250 mm • Total mass 1.5 kg This kind of form factor opens up use cases that traditional industrial arms struggle with. Think PCB assembly, micro soldering, precision pick and place of irregular parts, and medical or micro robotics components. ❗️What I find interesting is not just the numbers, but the direction… Smaller, lighter, highly precise systems could unlock automation in environments where space, inertia, and tolerance are the real constraints. Credit to Oleksandr Stepanenko for the original work and post. —- Weekly robotics and AI insights. Subscribe free:

Ilir Aliu

74,120 просмотров • 7 месяцев назад

Today I assembled the first batch of reBot DevArm in the U.S! First one on the planet! 🇺🇸⚙️ But this isn’t about a robot arm. This is about what happens when open source hits robotics. For years: •Hardware was locked •Robotics was expensive •Embodied AI was out of reach Now? Anyone can get their hands on: •6 DOF manipulation •Real precision (<0.2 mm repeatability) •Full stack access (ROS, Isaac Sim, LeRobot) This is how movements start. Not in labs. Not behind paywalls. But in the hands of builders. Massive respect to Seeed Studio for pushing true open-source robotics forward! We’re about to see: → Thousands of robot arms trained like athletes → Real-world datasets explode → Physical AI built in garages, not just research labs At SoloTech , this is the unlock we’ve been waiting for, training and deploying Physical AI skill models on real hardware, anywhere. No sims. No vaporware. No excuses. Production Grade Physical AI. Want to get access? Check out the Physical AI Gym in San Francisco or DM me.
0:20

Today I assembled the first batch of reBot DevArm in the U.S! First one on the planet! 🇺🇸⚙️ But this isn’t about a robot arm. This is about what happens when open source hits robotics. For years: •Hardware was locked •Robotics was expensive •Embodied AI was out of reach Now? Anyone can get their hands on: •6 DOF manipulation •Real precision (<0.2 mm repeatability) •Full stack access (ROS, Isaac Sim, LeRobot) This is how movements start. Not in labs. Not behind paywalls. But in the hands of builders. Massive respect to Seeed Studio for pushing true open-source robotics forward! We’re about to see: → Thousands of robot arms trained like athletes → Real-world datasets explode → Physical AI built in garages, not just research labs At SoloTech , this is the unlock we’ve been waiting for, training and deploying Physical AI skill models on real hardware, anywhere. No sims. No vaporware. No excuses. Production Grade Physical AI. Want to get access? Check out the Physical AI Gym in San Francisco or DM me.

Dhruv Diddi

31,214 просмотров • 3 месяцев назад

Robots from Humanoid passed real factory test at Siemens! 😮‍💨 Humanoid from the UK just completed a successful proof of concept with Siemens, deploying their HMND 01 wheeled humanoid robot in a real working factory. The task was simple but important: pick totes from a storage stack, transport them to a conveyor, and place them at the pickup point for human operators. Repeat until the stack is empty. The robot achieved 60 tote moves per hour, handled two different tote sizes, ran autonomously for more than 30 minutes at a time, stayed operational for over eight hours, and maintained over 90% success rate on pick and place tasks. This matters because it's not a demo video. It's a real deployment in Siemens' Electronics Factory in Erlangen, handling actual production work, measured against real operational metrics. The test ran in two phases. First, Humanoid built a physical twin in-house to test and optimize the system. Then they deployed on-site at Siemens for two weeks, where the robot operated in the real production environment. We can see a wheeled humanoid robot in action! So, now the ultimate question: wheels or legs? 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:26

Robots from Humanoid passed real factory test at Siemens! 😮‍💨 Humanoid from the UK just completed a successful proof of concept with Siemens, deploying their HMND 01 wheeled humanoid robot in a real working factory. The task was simple but important: pick totes from a storage stack, transport them to a conveyor, and place them at the pickup point for human operators. Repeat until the stack is empty. The robot achieved 60 tote moves per hour, handled two different tote sizes, ran autonomously for more than 30 minutes at a time, stayed operational for over eight hours, and maintained over 90% success rate on pick and place tasks. This matters because it's not a demo video. It's a real deployment in Siemens' Electronics Factory in Erlangen, handling actual production work, measured against real operational metrics. The test ran in two phases. First, Humanoid built a physical twin in-house to test and optimize the system. Then they deployed on-site at Siemens for two weeks, where the robot operated in the real production environment. We can see a wheeled humanoid robot in action! So, now the ultimate question: wheels or legs? 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

21,993 просмотров • 5 месяцев назад

Last night, China Central Television (CCTV) aired its 2026 Chinese New Year Gala celebrating the Year of the Horse. The show featured a wide range of performances, including Unitree Robotics humanoid robots performing martial arts in sync with human dancers. Just a year ago, Unitree’s robots appeared at the same gala, but their movements looked stiff and mechanical. This year, they were noticeably more fluid and coordinated — a remarkable improvement, even if they’re still likely operating under some level of remote supervision. When it comes to humanoid robotics, most of the visible momentum today seems to be coming from the U.S. and China. Companies like Tesla (with Optimus) and Boston Dynamics in the U.S., alongside rapidly advancing Chinese firms, dominate the headlines. So what happened to Europe and Japan? Japan was once seen as the global leader, especially with Honda’s ASIMO and SoftBank Robotics’ humanoid projects. However, ASIMO was retired, and much of Japan’s robotics focus shifted toward industrial automation and service robots rather than full-scale general-purpose humanoids. Europe, meanwhile, remains strong in industrial robotics, research, and precision engineering — with players like ABB and KUKA — but hasn’t pushed aggressively into commercial humanoid platforms at the same scale or speed as the U.S. and China. In short, it’s less that Europe and Japan disappeared, and more that the center of gravity in humanoid robotics — especially AI-driven, general-purpose humanoids — has shifted toward U.S.–China competition. Whether that gap widens or narrows will depend on breakthroughs in embodied AI, cost reduction, and real-world deployment over the next few years.
4:31

Last night, China Central Television (CCTV) aired its 2026 Chinese New Year Gala celebrating the Year of the Horse. The show featured a wide range of performances, including Unitree Robotics humanoid robots performing martial arts in sync with human dancers. Just a year ago, Unitree’s robots appeared at the same gala, but their movements looked stiff and mechanical. This year, they were noticeably more fluid and coordinated — a remarkable improvement, even if they’re still likely operating under some level of remote supervision. When it comes to humanoid robotics, most of the visible momentum today seems to be coming from the U.S. and China. Companies like Tesla (with Optimus) and Boston Dynamics in the U.S., alongside rapidly advancing Chinese firms, dominate the headlines. So what happened to Europe and Japan? Japan was once seen as the global leader, especially with Honda’s ASIMO and SoftBank Robotics’ humanoid projects. However, ASIMO was retired, and much of Japan’s robotics focus shifted toward industrial automation and service robots rather than full-scale general-purpose humanoids. Europe, meanwhile, remains strong in industrial robotics, research, and precision engineering — with players like ABB and KUKA — but hasn’t pushed aggressively into commercial humanoid platforms at the same scale or speed as the U.S. and China. In short, it’s less that Europe and Japan disappeared, and more that the center of gravity in humanoid robotics — especially AI-driven, general-purpose humanoids — has shifted toward U.S.–China competition. Whether that gap widens or narrows will depend on breakthroughs in embodied AI, cost reduction, and real-world deployment over the next few years.

Ray

23,439 просмотров • 5 месяцев назад

A Few Thoughts on Robotics The criticism that robotics can only be used in a rather one-sided way is, at the same time, the solution to the problem. What do I mean by that? Since the Industrial Revolution, humanity has increasingly made production methods more efficient. Fordism introduced assembly line work, but this comes at the expense of monotonous, repetitive tasks. On the one hand, immense wealth has been created; on the other hand, countless people suffer from repetitive tasks, which are a direct consequence of that industrial revolution and the division of labor- in other words, assembly line work. The debate about whether AI and robotics could impact the labor market is answered in different ways. I have a clear opinion on this: Up to now, technology has merely been an augmentation, an improvement of human labor to make it more effective. Robotics and AI, however, represent a qualitative break with this situation. For the first time in human history, it won't be humans who become more efficient, but rather replaceable, insofar as human augmentation becomes *less* efficient than replacing human labor with robotics. In just a few years, a human using technology will simply be less efficient than a robot that doesn't know an eight-hour day, weekends, or holidays, but can perform monotonous tasks 24/7 on an assembly line without breaking down due to physical ailments or needing medical attention. Wear and tear simply means replacing specific parts of the robot. To return to the initial question: production doesn't require general-purpose robots capable of performing a wide variety of tasks, but rather specialized robots that excel at the specific tasks for which they are needed. Figure02 vividly illustrates why this is only now possible: even the simplest assembly line work still requires delicate manual dexterity because the production line is designed for human hands. This breakthrough has now arrived, but AGI (Automated Generating Intelligence) isn't necessary for robots to be used in production processes. It's sufficient that they can perform monotonous tasks. And that's why I believe 2026 will be the year of the robots. (Clip: Figure02 in production chain at BMW Car-production)
1:24

A Few Thoughts on Robotics The criticism that robotics can only be used in a rather one-sided way is, at the same time, the solution to the problem. What do I mean by that? Since the Industrial Revolution, humanity has increasingly made production methods more efficient. Fordism introduced assembly line work, but this comes at the expense of monotonous, repetitive tasks. On the one hand, immense wealth has been created; on the other hand, countless people suffer from repetitive tasks, which are a direct consequence of that industrial revolution and the division of labor- in other words, assembly line work. The debate about whether AI and robotics could impact the labor market is answered in different ways. I have a clear opinion on this: Up to now, technology has merely been an augmentation, an improvement of human labor to make it more effective. Robotics and AI, however, represent a qualitative break with this situation. For the first time in human history, it won't be humans who become more efficient, but rather replaceable, insofar as human augmentation becomes *less* efficient than replacing human labor with robotics. In just a few years, a human using technology will simply be less efficient than a robot that doesn't know an eight-hour day, weekends, or holidays, but can perform monotonous tasks 24/7 on an assembly line without breaking down due to physical ailments or needing medical attention. Wear and tear simply means replacing specific parts of the robot. To return to the initial question: production doesn't require general-purpose robots capable of performing a wide variety of tasks, but rather specialized robots that excel at the specific tasks for which they are needed. Figure02 vividly illustrates why this is only now possible: even the simplest assembly line work still requires delicate manual dexterity because the production line is designed for human hands. This breakthrough has now arrived, but AGI (Automated Generating Intelligence) isn't necessary for robots to be used in production processes. It's sufficient that they can perform monotonous tasks. And that's why I believe 2026 will be the year of the robots. (Clip: Figure02 in production chain at BMW Car-production)

Chubby♨️

15,228 просмотров • 7 месяцев назад

XPeng's all-new generation humanoid robot, IRON, not only achieves an extreme level of anthropomorphism but also possesses a "brain" that can think like a human. This will be a significant competitor to $TSLA's Optimus v3 when both robots enter mass production in 2026. ✅ IRON is the humanoid robot with the highest computing power in the world, equipped with the second-generation VLA and 3 Turing AI chips, it builds a high-level combination of capabilities—VLT + VLA + VLM—for its "cerebrum" and "cerebellum." This allows it to achieve advanced intelligence like dialogue, walking, and interaction. ✅ It is the industry's first application of all-solid-state batteries, achieving extreme lightweighting, ultra-high energy density, and ultimate safety. ✅ XPeng also introduced robot active safety protection to maximize the safety of participants in the physical AI world, and expanded the "Fourth Law," ensuring privacy data never leaves the robot.
1:02

XPeng's all-new generation humanoid robot, IRON, not only achieves an extreme level of anthropomorphism but also possesses a "brain" that can think like a human. This will be a significant competitor to $TSLA's Optimus v3 when both robots enter mass production in 2026. ✅ IRON is the humanoid robot with the highest computing power in the world, equipped with the second-generation VLA and 3 Turing AI chips, it builds a high-level combination of capabilities—VLT + VLA + VLM—for its "cerebrum" and "cerebellum." This allows it to achieve advanced intelligence like dialogue, walking, and interaction. ✅ It is the industry's first application of all-solid-state batteries, achieving extreme lightweighting, ultra-high energy density, and ultimate safety. ✅ XPeng also introduced robot active safety protection to maximize the safety of participants in the physical AI world, and expanded the "Fourth Law," ensuring privacy data never leaves the robot.

Ming

63,141 просмотров • 8 месяцев назад

Japan Just Built a HouseBot You Control Without Speaking and It Changes Everything! Donut Robotics has officially unveiled its first bipedal humanoid, Cinnamon 1, and instead of focusing on louder voices or bigger motors, the company went in the opposite direction. Silence. Cinnamon 1 introduces what Donut Robotics calls Silent Gesture Control, a system that allows the humanoid to be guided using simple hand and finger movements rather than spoken commands. This approach feels especially well suited for real world environments where traditional voice control falls apart. Busy factory floors. Construction sites filled with constant noise. Even quiet indoor settings where voice commands feel awkward or intrusive. It also opens the door for far more accessible human robot interaction, particularly for users with impairments. While the current Cinnamon 1 hardware is built on an OEM platform, the intelligence driving it is where Donut Robotics is placing its long term bet. The team is actively developing custom Vision Language Action AI that allows the robot to interpret what it sees, understand intent, and respond with physical action. The goal is not just smarter robots, but robots that feel more natural. Even more ambitious is the company’s plan for full domestic production. Donut Robotics has stated its intention to localize both manufacturing and AI development in Japan, reinforcing the country’s reputation for precision engineering and thoughtful robotics design. If timelines hold, Cinnamon 1 units are expected to begin deployment in factories and construction environments by the end of 2026. That puts this humanoid squarely in the category of near term reality rather than distant concept. The takeaway is simple but important. As humanoid robots move out of labs and into daily work environments, the winners may not be the loudest or flashiest machines. They may be the ones that understand us without a word being spoken.
0:31

Japan Just Built a HouseBot You Control Without Speaking and It Changes Everything! Donut Robotics has officially unveiled its first bipedal humanoid, Cinnamon 1, and instead of focusing on louder voices or bigger motors, the company went in the opposite direction. Silence. Cinnamon 1 introduces what Donut Robotics calls Silent Gesture Control, a system that allows the humanoid to be guided using simple hand and finger movements rather than spoken commands. This approach feels especially well suited for real world environments where traditional voice control falls apart. Busy factory floors. Construction sites filled with constant noise. Even quiet indoor settings where voice commands feel awkward or intrusive. It also opens the door for far more accessible human robot interaction, particularly for users with impairments. While the current Cinnamon 1 hardware is built on an OEM platform, the intelligence driving it is where Donut Robotics is placing its long term bet. The team is actively developing custom Vision Language Action AI that allows the robot to interpret what it sees, understand intent, and respond with physical action. The goal is not just smarter robots, but robots that feel more natural. Even more ambitious is the company’s plan for full domestic production. Donut Robotics has stated its intention to localize both manufacturing and AI development in Japan, reinforcing the country’s reputation for precision engineering and thoughtful robotics design. If timelines hold, Cinnamon 1 units are expected to begin deployment in factories and construction environments by the end of 2026. That puts this humanoid squarely in the category of near term reality rather than distant concept. The takeaway is simple but important. As humanoid robots move out of labs and into daily work environments, the winners may not be the loudest or flashiest machines. They may be the ones that understand us without a word being spoken.

The AI Robot Guy on X

257,928 просмотров • 5 месяцев назад

A new member joins the European humanoid robot team. German company Agile Robotics has launched its first industrial humanoid robot, Agile One, featuring intuitive human-robot interaction, dexterous hands (for grasping small screws and touching the screen), and AI-driven operation trained in the real world. It performs tasks such as material collection, handling, picking and placing, loading and unloading machine tools, tool handling, and precision operations. The emergence of humanoid robots by industrial robot companies is a natural progression; they are designed for areas inaccessible to traditional robotic arms and industrial robots, extending operational systems and enhancing business collaboration capabilities. Agile One will be manufactured in Germany in early 2026 and deployed for on-site training at customers to enhance its AI model capabilities. Soon, Europe will enter its second wave of automation driven by intelligent technology.
1:32

A new member joins the European humanoid robot team. German company Agile Robotics has launched its first industrial humanoid robot, Agile One, featuring intuitive human-robot interaction, dexterous hands (for grasping small screws and touching the screen), and AI-driven operation trained in the real world. It performs tasks such as material collection, handling, picking and placing, loading and unloading machine tools, tool handling, and precision operations. The emergence of humanoid robots by industrial robot companies is a natural progression; they are designed for areas inaccessible to traditional robotic arms and industrial robots, extending operational systems and enhancing business collaboration capabilities. Agile One will be manufactured in Germany in early 2026 and deployed for on-site training at customers to enhance its AI model capabilities. Soon, Europe will enter its second wave of automation driven by intelligent technology.

CyberRobo

72,567 просмотров • 8 месяцев назад

Feeling what a robot feels is becoming real! 🫰 Fluid Reality just ran its first full end-to-end touch teleoperation system, and the demo shows why high-resolution haptics might be the missing piece in robot control. A 22 mm fingertip display with 32 independently actuated “bubbles” was mapped directly to tactile sensors on a robot hand. 🫧 Three fingers streamed real-time touch data robot → human, giving the operator actual contact feedback instead of waving their hands blind, like most teleop systems today. It’s still early, but this is a real step toward dexterous ops and high-quality data for training Physical AI systems. Companies involved: Samsung Electronics, Alt-Bionics, Inc. (the robot hand), MANUS™ (hand tracking), and Sensible Robotics (fingertip sensors) Touch isn’t a nice-to-have in robotics. It’s the difference between manipulation that works in the real world P.S. Guess how many touch receptors we humans, have in our hand! :) ~~ ♻ Join the weekly robotics newsletter, and never miss any news →
1:23

Feeling what a robot feels is becoming real! 🫰 Fluid Reality just ran its first full end-to-end touch teleoperation system, and the demo shows why high-resolution haptics might be the missing piece in robot control. A 22 mm fingertip display with 32 independently actuated “bubbles” was mapped directly to tactile sensors on a robot hand. 🫧 Three fingers streamed real-time touch data robot → human, giving the operator actual contact feedback instead of waving their hands blind, like most teleop systems today. It’s still early, but this is a real step toward dexterous ops and high-quality data for training Physical AI systems. Companies involved: Samsung Electronics, Alt-Bionics, Inc. (the robot hand), MANUS™ (hand tracking), and Sensible Robotics (fingertip sensors) Touch isn’t a nice-to-have in robotics. It’s the difference between manipulation that works in the real world P.S. Guess how many touch receptors we humans, have in our hand! :) ~~ ♻ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

46,829 просмотров • 7 месяцев назад

A simple CNC machine. Wood. A rotating tool. And yet the pattern shifts from circles to perfect hexagons with a level of accuracy most factories still struggle to hit. I worked five years in manufacturing at Siemens, and this is the part people often overlook. The real magic is not new or loud. It is stability. Repeatability. Tool paths that were tuned forever. Precision that just keeps working. Robotics is in a hype cycle right now, but manufacturing has delivered quiet perfection long before anyone talked about foundation models. Sometimes the most interesting engineering is the part that does not ask for attention. —- Weekly robotics and AI insights. Subscribe free:
0:26

A simple CNC machine. Wood. A rotating tool. And yet the pattern shifts from circles to perfect hexagons with a level of accuracy most factories still struggle to hit. I worked five years in manufacturing at Siemens, and this is the part people often overlook. The real magic is not new or loud. It is stability. Repeatability. Tool paths that were tuned forever. Precision that just keeps working. Robotics is in a hype cycle right now, but manufacturing has delivered quiet perfection long before anyone talked about foundation models. Sometimes the most interesting engineering is the part that does not ask for attention. —- Weekly robotics and AI insights. Subscribe free:

Ilir Aliu

164,829 просмотров • 7 месяцев назад