Загрузка видео...

Не удалось загрузить видео

Возникла проблема при загрузке этого видео. Это может быть связано с временными проблемами сети или видео может быть недоступно.

На главную

This tiny ESP32-S3 packs an impressive amount of hardware into 24mm. The M5Stack ATOMS3R is a tiny IoT controller built around a dual-core ESP32-S3 running at up to 240MHz, with 8MB Flash and 8MB PSRAM. It also has a 128×128 color display, BMI270 6-axis IMU, BMM150 magnetometer, programmable button... and IR transmitter, plus USB-C and expansion GPIO. At just 24 × 24 × 12.9mm and 6.8g, this is small enough to disappear inside the project you are building. You can program it with Arduino, ESP-IDF, PlatformIO or UiFlow2, so it is a pretty capable little platform for embedded and IoT experiments. At $17.50, it is the kind of board you can throw into a project just to see what you can build. Tiny board. Full ESP32-S3. Lots of possibilities.show more

Praveen Kumar Verma

9,041 subscribers

29,445 просмотров • 6 дней назад •via X (Twitter)

Anya Rossi• Live Now

Private livecam show

Комментарии: 0

Нет доступных комментариев

Здесь появятся комментарии из оригинального поста

Похожие видео

🎉 StackChan Quick Start StackChan is a super kawaii AI desktop robot co-created by M5Stack and the user community. It uses the M5Stack CoreS3 as its main controller, powered by an ESP32-S3 SoC featuring a 240 MHz dual-core processor, with 16MB Flash and 8MB PSRAM onboard, and supporting Wi-Fi and BLE. ✨Features ✅Based on the CoreS3 main unit ✅USB-C interface for power and data, 550 mAh battery ✅Two feedback servos (360-degree continuous rotation on the horizontal axis and 90-degree movement on the vertical axis) ✅Two rows totaling 12 RGB LEDs, Full-featured NFC ✅Infrared transmitter and receiver, Top-mounted three-zone touch panel * StackChan Remote Controller Kit has an additional remote controller (assembled from a Hat Mini JoyC and StickC-Plus) compared to StackChan. 🛒 Get Yours: Shopify: StackChan: StackChan Remote Controller Kit: AliExpress: #M5Stack #M5StackNew #StackChan #IoT #DesktopRobot #ESP32 #Makers #SmartDevice

🎉 StackChan Quick Start StackChan is a super kawaii AI desktop robot co-created by M5Stack and the user community. It uses the M5Stack CoreS3 as its main controller, powered by an ESP32-S3 SoC featuring a 240 MHz dual-core processor, with 16MB Flash and 8MB PSRAM onboard, and supporting Wi-Fi and BLE. ✨Features ✅Based on the CoreS3 main unit ✅USB-C interface for power and data, 550 mAh battery ✅Two feedback servos (360-degree continuous rotation on the horizontal axis and 90-degree movement on the vertical axis) ✅Two rows totaling 12 RGB LEDs, Full-featured NFC ✅Infrared transmitter and receiver, Top-mounted three-zone touch panel * StackChan Remote Controller Kit has an additional remote controller (assembled from a Hat Mini JoyC and StickC-Plus) compared to StackChan. 🛒 Get Yours: Shopify: StackChan: StackChan Remote Controller Kit: AliExpress: #M5Stack #M5StackNew #StackChan #IoT #DesktopRobot #ESP32 #Makers #SmartDevice

M5Stack

55,624 просмотров • 3 месяцев назад

#M5StackNew 🎉 StopWatch StopWatch is a portable AMOLED round touch development board designed for interactive and wearable scenarios, integrating display, touch, audio and motion sensing into one compact device. ✨Features ✅ ESP32-S3R8 core controller with 16MB Flash, 8MB PSRAM, and 2.4GHz Wi-Fi ✅ 1.75" AMOLED Touch Round Display, 2 x Programmable Buttons, 1 x Power Button ✅ Built-in Vibration Motor, 6-axis IMU BMI270, RX8130CE RTC ✅ ES8311 Audio Codec, MEMS MIC, AW8737A Amplifier for audio input and output ✅ HY2.0-4P Expansion Interface, M5PM1 Multi-level Power Management System, Built-in 450mAh Battery 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #ESP32S3 #AMOLED #WearableTech #Embedded #HMI #TouchDisplay #SmartDevices

#M5StackNew 🎉 StopWatch StopWatch is a portable AMOLED round touch development board designed for interactive and wearable scenarios, integrating display, touch, audio and motion sensing into one compact device. ✨Features ✅ ESP32-S3R8 core controller with 16MB Flash, 8MB PSRAM, and 2.4GHz Wi-Fi ✅ 1.75" AMOLED Touch Round Display, 2 x Programmable Buttons, 1 x Power Button ✅ Built-in Vibration Motor, 6-axis IMU BMI270, RX8130CE RTC ✅ ES8311 Audio Codec, MEMS MIC, AW8737A Amplifier for audio input and output ✅ HY2.0-4P Expansion Interface, M5PM1 Multi-level Power Management System, Built-in 450mAh Battery 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #ESP32S3 #AMOLED #WearableTech #Embedded #HMI #TouchDisplay #SmartDevices

M5Stack

36,617 просмотров • 3 месяцев назад

What If Your ESP32 Could Run Real 3D Graphics Without a GPU? 🤯 Jet is a tiny C++17 software 3D rasteriser built for constrained hardware like the ESP32 and STM32. - Runs entirely in software - Integer-only rendering - Native RGB565 - Flat, Gouraud and Phong shading - Affine and perspective-correct textures - Z-buffering and backface culling - Optional CRT, bloom and motion-blur effects - Designed for displays like ST7796 & ILI9488 On an ESP32-S3, Jet can render around 40,000 triangles/sec, with up to about 650 visible triangles at 60 FPS on a 480×320 display.

What If Your ESP32 Could Run Real 3D Graphics Without a GPU? 🤯 Jet is a tiny C++17 software 3D rasteriser built for constrained hardware like the ESP32 and STM32. - Runs entirely in software - Integer-only rendering - Native RGB565 - Flat, Gouraud and Phong shading - Affine and perspective-correct textures - Z-buffering and backface culling - Optional CRT, bloom and motion-blur effects - Designed for displays like ST7796 & ILI9488 On an ESP32-S3, Jet can render around 40,000 triangles/sec, with up to about 650 visible triangles at 60 FPS on a 480×320 display.

Praveen Kumar Verma

53,542 просмотров • 22 дней назад

ESP32-P4 booting up and running CircuitPython 🚀🐍 Core CircuitPython dev Scott has been chugging away at adding ESP32-P4 support to CircuitPython - and today tossed us a bin file that runs on the Eval board we got last week from Espressif. Native USB is still in progress, but we can connect to the REPL and save files using the USB-Serial converter. It's so fast at 400mhz, and with 16 or 32 MHz of PSRAM, it's going to be an awesome board for embedded Python! More soon! #espressif #esp32 #esp32p4 #python #adafruit #espfriends #circuitpython John Lee

ESP32-P4 booting up and running CircuitPython 🚀🐍 Core CircuitPython dev Scott has been chugging away at adding ESP32-P4 support to CircuitPython - and today tossed us a bin file that runs on the Eval board we got last week from Espressif. Native USB is still in progress, but we can connect to the REPL and save files using the USB-Serial converter. It's so fast at 400mhz, and with 16 or 32 MHz of PSRAM, it's going to be an awesome board for embedded Python! More soon! #espressif #esp32 #esp32p4 #python #adafruit #espfriends #circuitpython John Lee

adafruit industries

10,129 просмотров • 2 лет назад

Building a robot dog? This ESP32 board was made for it. Petoi Biboard is an ESP32-based development board designed for multi-joint robots, with up to 12 PWM servo outputs built right in. It also includes an onboard IMU for balance and motion sensing, wireless connectivity, expansion interfaces and audio features. The BiBoard V1 adds features such as a voice command module, speaker and Raspberry Pi support. What makes it especially interesting is the software ecosystem. The board works with Petoi's open-source OpenCat framework, giving developers a solid starting point for building quadruped robots instead of creating everything from scratch. An ESP32, 12 servos and open-source robotics software. That's a pretty good starting point for building your own robot dog.

Building a robot dog? This ESP32 board was made for it. Petoi Biboard is an ESP32-based development board designed for multi-joint robots, with up to 12 PWM servo outputs built right in. It also includes an onboard IMU for balance and motion sensing, wireless connectivity, expansion interfaces and audio features. The BiBoard V1 adds features such as a voice command module, speaker and Raspberry Pi support. What makes it especially interesting is the software ecosystem. The board works with Petoi's open-source OpenCat framework, giving developers a solid starting point for building quadruped robots instead of creating everything from scratch. An ESP32, 12 servos and open-source robotics software. That's a pretty good starting point for building your own robot dog.

Praveen Kumar Verma

75,013 просмотров • 7 дней назад

I built a bot on an ESP32 that can create full projects by itself. Ask it to generate images, videos, 3D, build a website and publish it, it does everything autonomously. Powered by Claude Opus 4.6 for code, visual content generated with fal, bot powered via OpenClaw🦞 The skills to generate project with fal are here All running on a tiny M5Stack Core2.

I built a bot on an ESP32 that can create full projects by itself. Ask it to generate images, videos, 3D, build a website and publish it, it does everything autonomously. Powered by Claude Opus 4.6 for code, visual content generated with fal, bot powered via OpenClaw🦞 The skills to generate project with fal are here All running on a tiny M5Stack Core2.

Lovis Odin

50,478 просмотров • 7 месяцев назад

🚀 Introducing COMET Air Mouse 🖱️ I’ve been working on a compact wireless air mouse built around the ESP32-C3 + MPU6050. Instead of moving a traditional mouse across a desk, COMET converts hand movements into real-time Bluetooth HID mouse controls. 🔹 ESP32-C3 🔹 MPU6050 gyroscope 🔹 BLE HID 🔹 Motion-controlled cursor 🔹 Left / right click 🔹 Gesture-based scrolling 🔹 Adjustable sensitivity & smoothing 🔹 Battery-powered design The firmware is now packaged as a ready-to-flash .bin release, making it possible to deploy the device without setting up the Arduino IDE or installing the required libraries. This project has been a great hands-on experience in embedded systems, Bluetooth HID, sensor processing, firmware development, and power management. And this is just V1.0. 🚀 🔥 Top 6 ESP32 eBooks #COMET #AirMouse #ESP32 #ESP32C3 #MPU6050 #Bluetooth #BLE #EmbeddedSystems #IoT #Electronics #Hardware #Arduino #Engineering #Maker

🚀 Introducing COMET Air Mouse 🖱️ I’ve been working on a compact wireless air mouse built around the ESP32-C3 + MPU6050. Instead of moving a traditional mouse across a desk, COMET converts hand movements into real-time Bluetooth HID mouse controls. 🔹 ESP32-C3 🔹 MPU6050 gyroscope 🔹 BLE HID 🔹 Motion-controlled cursor 🔹 Left / right click 🔹 Gesture-based scrolling 🔹 Adjustable sensitivity & smoothing 🔹 Battery-powered design The firmware is now packaged as a ready-to-flash .bin release, making it possible to deploy the device without setting up the Arduino IDE or installing the required libraries. This project has been a great hands-on experience in embedded systems, Bluetooth HID, sensor processing, firmware development, and power management. And this is just V1.0. 🚀 🔥 Top 6 ESP32 eBooks #COMET #AirMouse #ESP32 #ESP32C3 #MPU6050 #Bluetooth #BLE #EmbeddedSystems #IoT #Electronics #Hardware #Arduino #Engineering #Maker

Ebokify

26,486 просмотров • 22 дней назад

another example: a developer used the exact same $8 ESP32-S3 chip and local AI setup to build a real-time object recognition camera the fact that this is running entirely offline, on an eight-dollar microcontroller, without any cloud API calls, is wild... it captures the video feed, processes it locally through the model, and identifies objects in real-time. we are entering an era where you can just glue intelligence onto any physical object for less than $10. the hardware barrier is completely shattered.

another example: a developer used the exact same $8 ESP32-S3 chip and local AI setup to build a real-time object recognition camera the fact that this is running entirely offline, on an eight-dollar microcontroller, without any cloud API calls, is wild... it captures the video feed, processes it locally through the model, and identifies objects in real-time. we are entering an era where you can just glue intelligence onto any physical object for less than $10. the hardware barrier is completely shattered.

ard

224,965 просмотров • 1 месяц назад

#M5StackNew 🎉 PaperMono & PaperMono-Lite Released PaperMono is an e-paper development board designed for low-power display, near-field identification, and long-range communication applications. PaperMono-Lite is a streamlined version of PaperMono. ✨Features ✅ESP32-S3R8 core controller, 16MB Flash, 8MB PSRAM, 2.4 GHz Wi-Fi ✅3.97-inch 4-level grayscale black-and-white e-paper display with touch support ✅Integrated front-light system, RGB LED & built-in 1150mAh battery ✅PDM microphone (LMD4737T261-AC02) & built-in buzzer ✅BMI270 6-axis IMU, M5IOE1 IO expander, microSD card slot, RX8130CE RTC ✅NFC functionality & LoRa communication supporting 868MHz ~ 923MHz (PaperMono Only) 🛒 Get Yours: Official Store: PaperMono: PaperMono-Lite: AliExpress: #M5Stack #PaperMono #EInk #Dashboard #LowPower #IoT #Maker #NFC #LoRa

#M5StackNew 🎉 PaperMono & PaperMono-Lite Released PaperMono is an e-paper development board designed for low-power display, near-field identification, and long-range communication applications. PaperMono-Lite is a streamlined version of PaperMono. ✨Features ✅ESP32-S3R8 core controller, 16MB Flash, 8MB PSRAM, 2.4 GHz Wi-Fi ✅3.97-inch 4-level grayscale black-and-white e-paper display with touch support ✅Integrated front-light system, RGB LED & built-in 1150mAh battery ✅PDM microphone (LMD4737T261-AC02) & built-in buzzer ✅BMI270 6-axis IMU, M5IOE1 IO expander, microSD card slot, RX8130CE RTC ✅NFC functionality & LoRa communication supporting 868MHz ~ 923MHz (PaperMono Only) 🛒 Get Yours: Official Store: PaperMono: PaperMono-Lite: AliExpress: #M5Stack #PaperMono #EInk #Dashboard #LowPower #IoT #Maker #NFC #LoRa

M5Stack

56,740 просмотров • 19 дней назад

A 19-year-old student built a little robot that goes to lectures and takes notes so they can sleep in class It is a tiny screen with an animated smiley face, sitting on a 3D-printed stickman body You just tap its face at the start of class It listens through a built-in mic, records the professor, and as soon as class ends, turns the entire lecture into a structured summary right on the display Under the hood, it runs on an ESP32 microcontroller, an OLED screen, a small battery, and an SD card The best part - the student did not even code it line by line. The entire codebase was written using Cursor AI Audio goes in, gets transcribed, AI structures the notes, and it is ready before you even leave the room Most students are still struggling to take notes while half asleep. This little guy just sits on the desk and handles it all

A 19-year-old student built a little robot that goes to lectures and takes notes so they can sleep in class It is a tiny screen with an animated smiley face, sitting on a 3D-printed stickman body You just tap its face at the start of class It listens through a built-in mic, records the professor, and as soon as class ends, turns the entire lecture into a structured summary right on the display Under the hood, it runs on an ESP32 microcontroller, an OLED screen, a small battery, and an SD card The best part - the student did not even code it line by line. The entire codebase was written using Cursor AI Audio goes in, gets transcribed, AI structures the notes, and it is ready before you even leave the room Most students are still struggling to take notes while half asleep. This little guy just sits on the desk and handles it all

pulmencr

56,169 просмотров • 1 месяц назад

Culture is genetic because behavior is genetic. This beaver never saw a dam in its life. No beavers or anything else ever taught it to build a dam. It wants to build a dam because it is a beaver. Many beavers together build a big dam. That is beaver culture. Humans are not different. Nothing is different. This is what life is. This is how life works. Your body is your mind. A caterpillar wants to build a chrysalis. A bee wants to build a hive. A lion wants to build a pride. You are not special. You are not above your nature. you are INSIDE of it. The thoughts that we think are genetic thoughts. The crimes we commit are genetic crimes. The art we create is genetic art. Just like this beaver, you can give the animal different sticks and it will build a different dam, but it will always build a dam. And you can give humans different "education," but the human will always use it to do what its genes tell it to do. This is the first big answer that you need. This is the biggest piece of the puzzle. This is how to understand people 90% of the way. You just... notice what they do, and get out of the way, and watch them do it. And if they need sticks, you give them sticks. And if you don't like what they do, you have to get away from them. You cannot train dam-building into them or out of them any more than you can with a beaver. A beaver wants to build a dam because it is a beaver. Whatever you see people build, that's what they wanted to build from the sticks they got in the river they were in. Stop pretending you can change it.

Culture is genetic because behavior is genetic. This beaver never saw a dam in its life. No beavers or anything else ever taught it to build a dam. It wants to build a dam because it is a beaver. Many beavers together build a big dam. That is beaver culture. Humans are not different. Nothing is different. This is what life is. This is how life works. Your body is your mind. A caterpillar wants to build a chrysalis. A bee wants to build a hive. A lion wants to build a pride. You are not special. You are not above your nature. you are INSIDE of it. The thoughts that we think are genetic thoughts. The crimes we commit are genetic crimes. The art we create is genetic art. Just like this beaver, you can give the animal different sticks and it will build a different dam, but it will always build a dam. And you can give humans different "education," but the human will always use it to do what its genes tell it to do. This is the first big answer that you need. This is the biggest piece of the puzzle. This is how to understand people 90% of the way. You just... notice what they do, and get out of the way, and watch them do it. And if they need sticks, you give them sticks. And if you don't like what they do, you have to get away from them. You cannot train dam-building into them or out of them any more than you can with a beaver. A beaver wants to build a dam because it is a beaver. Whatever you see people build, that's what they wanted to build from the sticks they got in the river they were in. Stop pretending you can change it.

hoe_math = PsychoMath

1,190,914 просмотров • 1 год назад

✨ To inspire more people to go build something now that we have AI to help us (especially non-tech people, cause I still know so many who are scared of building something): I added a [ BUILD IT ] button to It's like a mini-Lovable/Replit/v0: Any idea you see you like, you can click [ BUILD IT ], and it will use Opus 4.6 to build a landing page for it And then you can download the code it generated It's not a full startup of course, but a nice preview of what it can be, to give you an idea and inspire you to build it out further The code is live streamed also so you can see it being built 😊 Ironically this itself took me 1 hour to build with AI too Completely free and I pay for the tokens (please don't abuse it :D)

✨ To inspire more people to go build something now that we have AI to help us (especially non-tech people, cause I still know so many who are scared of building something): I added a [ BUILD IT ] button to It's like a mini-Lovable/Replit/v0: Any idea you see you like, you can click [ BUILD IT ], and it will use Opus 4.6 to build a landing page for it And then you can download the code it generated It's not a full startup of course, but a nice preview of what it can be, to give you an idea and inspire you to build it out further The code is live streamed also so you can see it being built 😊 Ironically this itself took me 1 hour to build with AI too Completely free and I pay for the tokens (please don't abuse it :D)

@levelsio

277,411 просмотров • 5 месяцев назад

What If Your Desk Robot Could Learn Your Moves? Meet Quaddle, a tiny open-source quadruped built for tinkering. It has just 4 servos, but can run, glide sideways and spin in place. You can program it with Block coding, Python or C++. You can physically guide it through a movement, tap to record, and it can learn and replay the trick. There is also AI conversation, touch interaction, sensors and 3D-printable parts. A fun way to get hands-on with robotics, coding, AI and mechanical design.

What If Your Desk Robot Could Learn Your Moves? Meet Quaddle, a tiny open-source quadruped built for tinkering. It has just 4 servos, but can run, glide sideways and spin in place. You can program it with Block coding, Python or C++. You can physically guide it through a movement, tap to record, and it can learn and replay the trick. There is also AI conversation, touch interaction, sensors and 3D-printable parts. A fun way to get hands-on with robotics, coding, AI and mechanical design.

Praveen Kumar Verma

15,079 просмотров • 29 дней назад

Smart Doll Cortex can now run Windows XP! (Kinda) The ESP32-S3-based ATOM S3R by M5Stack is tiny enough, once removed from its case, to fit inside the upper bust of Smart Doll Cortex. We are preparing a dedicated ATOM S3R Bust together with a magnetic bracket that holds the ATOM unit in place. The STL files for both will be released for free. Windows XP is just for fun, but the ATOM S3R itself can be programmed in C++ using the Arduino IDE to do considerably more useful things. You could give your Smart Doll a voice through ChatGPT or Xiaozhi AI, attach sensors such as cameras and environmental detectors, or experiment with practical applications such as fall detection and sending alerts when an elderly person at home may need assistance. Or if you are on team no-AI, you could simply have the ATOM loop a video of Never Gonna Give You Up. What would you program your Smart Doll to do? #smartdoll #bjd

Smart Doll Cortex can now run Windows XP! (Kinda) The ESP32-S3-based ATOM S3R by M5Stack is tiny enough, once removed from its case, to fit inside the upper bust of Smart Doll Cortex. We are preparing a dedicated ATOM S3R Bust together with a magnetic bracket that holds the ATOM unit in place. The STL files for both will be released for free. Windows XP is just for fun, but the ATOM S3R itself can be programmed in C++ using the Arduino IDE to do considerably more useful things. You could give your Smart Doll a voice through ChatGPT or Xiaozhi AI, attach sensors such as cameras and environmental detectors, or experiment with practical applications such as fall detection and sending alerts when an elderly person at home may need assistance. Or if you are on team no-AI, you could simply have the ATOM loop a video of Never Gonna Give You Up. What would you program your Smart Doll to do? #smartdoll #bjd

Smartdoll Land

17,266 просмотров • 2 дней назад

New stuff you can do in Spline v2: Building a TSL material with texture atlases was surprisingly easy > A little 2D samurai running around. I gave Claude a 2D sprite sheet of a and asked it to generate the atlases, and the agent in Spline took care of writing a shader that runs the loop at the right speed and binds it all to the keyboard. An old-school game with the advantages of 3D. Super promising. This is really just the basics here (an Idle and a Run state) but you can add jumps and build on it.

New stuff you can do in Spline v2: Building a TSL material with texture atlases was surprisingly easy > A little 2D samurai running around. I gave Claude a 2D sprite sheet of a and asked it to generate the atlases, and the agent in Spline took care of writing a shader that runs the loop at the right speed and binds it all to the keyboard. An old-school game with the advantages of 3D. Super promising. This is really just the basics here (an Idle and a Run state) but you can add jumps and build on it.

Joseph Azar

14,532 просмотров • 16 дней назад

Limpopo Boy has just built a big house at his home, and honestly, this is exactly what we love to see. It shows that talent, consistency, and smart decisions can take you far even when you start with very little. This is the kind of mindset the young generation needs to embrace, building something meaningful and investing back at home. Big respect to him for leading by example this is how real impact is made and how communities are uplifted.

Limpopo Boy has just built a big house at his home, and honestly, this is exactly what we love to see. It shows that talent, consistency, and smart decisions can take you far even when you start with very little. This is the kind of mindset the young generation needs to embrace, building something meaningful and investing back at home. Big respect to him for leading by example this is how real impact is made and how communities are uplifted.

Bethuel Mathebula

58,247 просмотров • 3 месяцев назад

''The Penis is a muscle just like any other muscle, and you can build it.'' Guys, this information is wrong. The penis is not made up of a muscle that you can build and grow, like your chest, like your triceps, like your shoulders. The penis is made up of a spongy tissue. When you are getting hard, this spongy tissue gets filled up with blood. The more blood that flows in there, the harder you become, and you end up with an erection. There are no muscle fibers there that you can train so that they can become bigger and they can grow. Enough with this misunderstanding. At the end of the day, size and shape is determined by one thing, that is genes. The same way it determines size and the shape of your nose, your ears, the broadness of your shoulders, your height as a man, genes. There is little to nothing that you can do to impact and change that. And if you're thinking about doing surgery, please, don't. It is very risky, there is always disappointments, and honestly, it is not worth it. The solution is very simple: - Stop comparing yourself to others - Focus on yourself - Stop watching porn - And above all, stop touching yourself Simple. One percent.

''The Penis is a muscle just like any other muscle, and you can build it.'' Guys, this information is wrong. The penis is not made up of a muscle that you can build and grow, like your chest, like your triceps, like your shoulders. The penis is made up of a spongy tissue. When you are getting hard, this spongy tissue gets filled up with blood. The more blood that flows in there, the harder you become, and you end up with an erection. There are no muscle fibers there that you can train so that they can become bigger and they can grow. Enough with this misunderstanding. At the end of the day, size and shape is determined by one thing, that is genes. The same way it determines size and the shape of your nose, your ears, the broadness of your shoulders, your height as a man, genes. There is little to nothing that you can do to impact and change that. And if you're thinking about doing surgery, please, don't. It is very risky, there is always disappointments, and honestly, it is not worth it. The solution is very simple: - Stop comparing yourself to others - Focus on yourself - Stop watching porn - And above all, stop touching yourself Simple. One percent.

Franc: Day 1/30

58,183 просмотров • 1 день назад

Peter was inducted as a solo artist into the Rock & Roll Hall of Fame on this day 12 years ago. "Watch out for music. It should come with a health warning. It can be dangerous. It can make you feel so alive, so connected to the people all around you, and connected to what you really are inside, and it can make you think that the world should and could be a much better place. And just occasionally it can make you very, very happy."

Peter was inducted as a solo artist into the Rock & Roll Hall of Fame on this day 12 years ago. "Watch out for music. It should come with a health warning. It can be dangerous. It can make you feel so alive, so connected to the people all around you, and connected to what you really are inside, and it can make you think that the world should and could be a much better place. And just occasionally it can make you very, very happy."

Peter Gabriel

31,436 просмотров • 5 месяцев назад

How is the Web changing due to AI? This visit to TinyFish yesterday goes deeply into just how. TinyFish makes a new kind of web browser. One that is started virtually. It is like a Google Chrome in the cloud. But it is very smart, can read and use any website, and your AI agents can talk to it. Here we talk about what it all means for business and the future of robots, brain computer interfaces, and AI glasses. It lets you build systems that can look at MANY websites at the same time and build new kinds of apps to do all sorts of new things.

How is the Web changing due to AI? This visit to TinyFish yesterday goes deeply into just how. TinyFish makes a new kind of web browser. One that is started virtually. It is like a Google Chrome in the cloud. But it is very smart, can read and use any website, and your AI agents can talk to it. Here we talk about what it all means for business and the future of robots, brain computer interfaces, and AI glasses. It lets you build systems that can look at MANY websites at the same time and build new kinds of apps to do all sorts of new things.

Robert Scoble

16,341 просмотров • 8 месяцев назад