Woooow. ....only genius will understand it

This is the dumbest thing ever. It doesn’t matter if that’s lead or aluminum, that is shearing off upon startup. Now you have metal in the oil pan. That’s a woodruff key and they are made of high carbon steel. Don’t do this

Bullshit. Pot metal will not work as a cast Woodruff key.

It’s also going to shear off as soon as the spindle turns…good for getting a shape for a real shear pin made. If that’s lead…she isn’t gonna hold any load on the key way

Or you could just buy one for $.50

I guess I’m not a genius because I see that garbage woodruff key shearing right off the moment the shaft is turned. 😂

Making a new woodruff key, not sure I'd trust the soft metal used though.

🤣🤣🤣..Lead🤦 I fixed one last year, didn't want to drive all around to find one, it was missing, not much reference. I used a broken drill bit, the shank, cut, grinded, shaped, fit like a glove.

Aluminum key on a steel shaft ? Will last about 2 minutes

And you trusting something you cutted off with a sharp blade?

And I would fire that employee

What’s the shear strength on that flimsy thing?

It’s a joke not?

Shear looks like a bad idea🤣🤣🤣😊

Only a retard would do it 🙄🤠

That key is worthless.

Seriously?……. Good luck!

Give that two seconds .... soft woodruff key ??.... jeeeez .

You probably could have just used silly putty.

Less than a genius would have just purchased a woodruff key. Pays to be average

You can buy a box of various keyways for twenty bucks on Amazon.

Looks good doesnt´t work

Only genius will understand this

Firing up the crucible seems a bit much for a woodruff key but OK.

I should write down my ideas before I forget them.

A $100 fix for a .10 problem

Yeah to a soft key was made. It’s doubtful it will hold up for long!

They sell those cheap

That’s a woodruff key for a crank to advance timing

Why spend an hour on something that won't last a minute? When you can buy it for a few cents.

Come on now🤨A woodruff key made out of lead would shear right off🙄

The shaft is made of hardened steel, so how were they able to cut a keyway with a regular knife?🤔

No dura un suspiro ese apaño de chaveta