Wevolver
@WevolverApp • 62,996 subscribers
Wevolver is the platform that provides the knowledge and connections to develop better technology.
Shorts
Videos
These stainless-steel beads form a powder that is over six times finer than flour, meaning each particle is too small to see with the naked eye. Powders like this are the basic building material of a type of metal 3D printing called "laser powder bed fusion" or (PBF-LB). It works by spreading out a thin layer of metal powder and using a powerful laser to melt the powder together into a specific shape. Then the process continues by laying down a fresh layer of powder on top and repeating. Each layer is leveled off by a wiper. It’s like the way you might level off a cup of flour with the back of a knife. To make a good 3D-printed part, the powder must be spread in an even, consistent way. Now, thanks to NIST research, we can watch the powder spreading and study its behavior. This work will improve the consistency and quality of metal 3D printed parts. Video Credit: National Institute of Standards and Technology #engineering #technology #3dprinting #additivemanufacturing
Wevolver72,938 görüntüleme • 13 gün önce
Meta Develops Non-Invasive Neural Interface for Next-Generation Interaction Meta Reality Labs is advancing wrist-based neural interface technology designed to enable more natural and intuitive interaction with future computing platforms. The non-invasive device leverages finger-tracking to interpret user intent. Meta’s CEO has indicated that the technology could reach commercialization within the next few years. Video source: Meta #Meta #VR #AR #NeuralWristband #tech ----------------------- Wanna get your company on Wevolver too? Learn how:
Wevolver331,304 görüntüleme • 2 ay önce
LUYTEN 3D and researchers at the University of Wollongong have developed Australia’s first underwater 3D concrete printing system, alongside a “single-mix” concrete formulation that works underwater without chemical accelerators. The technology enables direct underwater construction and repair of marine and subsea infrastructure while reducing reliance on dry docking and large-scale marine works. Potential applications include ports, coastal infrastructure, offshore energy, and defence projects, including support for future submarine and floating wind farm infrastructure. Video Credit: LUYTEN® #engineering #technology #3dprinting #additivemanufacturing
Wevolver29,112 görüntüleme • 6 gün önce
This installation enables a live plant to control a machete. Plant machete has a control system that reads and utilizes the electrical noises found in a live philodendron. The system uses an open-source microcontroller connected to the plant to read varying resistance signals across the plant’s leaves. Using custom software, these signals are mapped in real-time to the movements of the joints of the industrial robot holding a machete. In this way, the movements of the machete are determined based on input from the plant. Essentially, the plant is the brain of the robot, controlling the machete, determining how it swings, jabs, slices, and interacts in space. Video Credit: David Bowen #engineering #technology
Wevolver48,134 görüntüleme • 17 gün önce
This system uses a KUKA robot to create intricate, 3D designs in cocktails. The robot "injects" microliter drops of edible liquid into a cocktail, instead of building up objects layer by layer, as with a normal 3D printer. Video Credit: KUKA #engineering #technology #3dprinting #additivemanufacturing ----------------------- Wanna get your company on Wevolver too? Learn how:
Wevolver353,664 görüntüleme • 8 ay önce
Ever tried 3D scanning a printed circuit board (PCB)? Capturing tiny solder joints, dense routing, and reflective surfaces is no easy task. In this demo, the AutoScan Inspec 2 takes on a highly complex electronic component to show what high-accuracy 3D metrology can achieve. Watch how it captures fine micro-details and converts them into a precise 3D model ready for reverse engineering, inspection, and quality control workflows. ---- From automotive body panels to aerospace components, precision inspection is becoming a critical part of modern manufacturing. This new whitepaper explores how high-accuracy 3D metrology is helping engineers capture full-field data, reduce inspection bottlenecks, and improve quality assurance workflows with micron-level precision. Get the whitepaper here: #3dscanning #engineering #technology Shining 3D, Inc.
Wevolver35,888 görüntüleme • 26 gün önce
Ever tried 3D scanning a printed circuit board (PCB)? Capturing tiny solder joints, dense routing, and reflective surfaces is no easy task. In this demo, the AutoScan Inspec 2 takes on a highly complex electronic component to show what high-accuracy 3D metrology can achieve. Watch how it captures fine micro-details and converts them into a precise 3D model ready for reverse engineering, inspection, and quality control workflows. ---- From automotive body panels to aerospace components, precision inspection is becoming a critical part of modern manufacturing. This new whitepaper explores how high-accuracy 3D metrology is helping engineers capture full-field data, reduce inspection bottlenecks, and improve quality assurance workflows with micron-level precision. Get the whitepaper here: #3dscanning #engineering #technology Shining 3D, Inc.
Wevolver11,991 görüntüleme • 10 gün önce
The Dronut X1 is a bi-rotor ducted drone powered by Cleo Robotics' patented thrust vectoring #technology. With no exposed propellers and a compact design that can fit in the palm of your hand, the Dronut can safely fly where no other drone has flown before. #drone #engineering
Wevolver621,502 görüntüleme • 2 yıl önce
A Taiwanese startup is rethinking what a SCARA robot can do. They developed a robot that outperforms typical SCARA models in speed, stability, and space efficiency. Unlike most conventional arms, it can also move smoothly through singularity positions, where many robots lose control or need complex workarounds. That matters more than it sounds. Singularity limits often prevent standard industrial robots from handling certain tasks. Solving it could unlock more advanced automation in tighter, more demanding spaces. Video Credit: Marc Theermann #robotics #robots
Wevolver30,432 görüntüleme • 1 ay önce
Unitree’s B2-W Industrial Wheel has been upgraded. The B2-W is a quadruped robot from Unitree equipped with wheels on its limbs. Built with industrial-grade protection, it can overcome obstacles and reach speeds of up to 20 km/h. It is designed for stable movement across a wide range of environments, adapting to stairs, flat surfaces, and uneven terrain such as stones, gravel, or sand. Video Credit: Unitree Robotics #robotics #robots #engineering #technology #unitree
Wevolver132,494 görüntüleme • 8 ay önce
Developing an oil-filled dilated pupil mech on Jurassic World Dominion. It was designed using compressed clear silicone oil to create a magnifying lens over a flexible membrane. Video credit: Karl Gallivan (Karl Gallivan) #props #animatronics #engineering #technology #jurassicworld #jurassicworlddominion
Wevolver277,321 görüntüleme • 1 yıl önce
Medivis’ technology transforms complex 2D imaging, like MRI and CT scans, into real-time 3D visualizations that can be superimposed onto the patient's body in real-time at the bedside. Video Credit: @Medivis_AR #engineering #technology #hologram #augmentedreality
Wevolver183,075 görüntüleme • 1 yıl önce
Making an artificial sun for Rogier Vanderzwaag by Daniel de Bruin. 10m of LED strip used, containing 4200 high-power SMD LEDs with a combined total of 18.000 lumen at 250W. The ball is also remotely dimmable. Video Credit: Daniel de Bruin #engineering #sun #technology
Wevolver10,767 görüntüleme • 20 gün önce
1:05
Sensitive content
This media may contain sensitive content.
Wheelbot: Conceptual Autonomous Tire System for Versatile Mobility The Wheelbot is a conceptual autonomous tire and wheel system designed to navigate a range of terrains, including urban settings. This concept explores the potential for future mobility solutions in which wheels can detach from vehicles and function independently as robotic units. Credit: Hankook Tire #hankook #tyres #formulaone #formula1 #engineering #techology -------------------------------- Stay ahead of the curve! Follow us now on our WhatsApp ( and Telegram ( channels and stay updated about the cutting edge.
Wevolver50,433 görüntüleme • 5 ay önce
TRUMPF has introduced the TruLaser Series 3000 Bevel Cut Edition to support integrated bevel and countersink cutting within a single setup. The system enables cutting at angles of up to ±50°, allowing complex edge geometries to be produced directly during the laser process. By incorporating bevel cutting into the primary machining stage, the platform reduces the need for secondary operations, contributing to fewer processing steps and more streamlined metal fabrication workflows. Video source: TRUMPF
Wevolver25,629 görüntüleme • 3 ay önce
Jeff Bezos tries the Tactile Telerobot. The Tactile Telerobot is a haptic telerobotic system capable of transmitting realistic touch feedback to an operator located anywhere in the world. Developed through a joint collaboration between Shadow Robot Company, HaptX, and SynTouch, the project’s initial research and development was funded by All Nippon Airways. -- Robotics teams are challenged to turn human-like dexterity from theory into real-world systems. While dexterous manipulation promises major impact across industries, a gap remains between capability and deployment. Shadow Robot helps close this gap through a dexterity-first, structured engagement model that transforms ideas into prototypes and scalable solutions. The "Trusted Hands: Engineering Collaboration with Shadow Robot" whitepaper highlights how collaboration and repeatable frameworks enable organizations to overcome barriers and advance dexterous robotics in new domains. Get it here: #robotics #robots #engineering #technology
Wevolver31,140 görüntüleme • 4 ay önce
Researchers at the Beihang University in Beijing have invented a 2-centimeter-long microbot with ultrafast untethered running speeds. The research results were published in a study titled "A Wireless Controlled Robotic Insect with Ultrafast Untethered Running Speeds" in journal Nature Communications. Resembling a bug, this innovative robot has the potential for future applications in emergency rescue and mechanical inspection. Video source: Beihang University / CGTN #microrobot #locomotion #biomimicry #robotics #technology #engineering #innovation -------------------------------- Stay ahead of the curve! Follow us now on our WhatsApp ( and Telegram ( channels and stay updated about the cutting edge.
Wevolver50,356 görüntüleme • 9 ay önce
Researchers at the Beihang University in Beijing have invented a 2-centimeter-long microbot with ultrafast untethered running speeds. The research results were published in a study titled "A Wireless Controlled Robotic Insect with Ultrafast Untethered Running Speeds" in journal Nature Communications. Resembling a bug, this innovative robot has the potential for future applications in emergency rescue and mechanical inspection. Video source: Beihang University / CGTN #microrobot #locomotion #biomimicry #robotics #technology #engineering #innovation -------------------------------- Stay ahead of the curve! Follow us now on our WhatsApp ( and Telegram ( channels and stay updated about the cutting edge.
Wevolver61,807 görüntüleme • 1 yıl önce
For the MassRobotics competition, this team addressed the challenge of combining safety with power. Their solution featured a robotic arm equipped with a uniquely torsionally rigid universal coupling. Powered by Maxon and Novanta, the arm safely interacts with its environment while performing tasks such as scrubbing and installing light bulbs. Video Credit: Northeastern University College of Engineering / Jakub Kowalewski and Ryo Takei #robotics #robots #engineering #technology -------------------------------- Stay ahead of the curve! Follow us now on our WhatsApp ( and Telegram ( channels and stay updated about the cutting edge.
Wevolver47,169 görüntüleme • 9 ay önce