Video wird geladen...

Video konnte nicht geladen werden

Zur Startseite

A Sydney-based startup, Crest Robotics, has built huge spider-like robot, named Charlotte. It's designed to 3D print entire buildings using raw materials it processes on site. And there are ambitions for it to build structures on the Moon.

rohanpaul_ai's profile picture

Rohan Paul

155,537 subscribers

311,098 Aufrufe • vor 1 Jahr •via X (Twitter)

Wissenschaft & TechnologieNachrichten & Politik
LIVE

Anya Rossi• Live Now

Private livecam show

0 Kommentare

Keine Kommentare verfügbar

Kommentare vom Original-Post werden hier angezeigt

Ähnliche Videos

Charlotte is a spider-inspired construction robot developed by Australian startups Crest Robotics and Earth Built Technology. It is designed to revolutionize building by using local raw materials instead of traditional cement. The robot can 3D print an entire 2,150-square-foot house in just 24 hours. With its bio-inspired legs, Charlotte can move autonomously, adjust its height during construction, and operate without the need for scaffolding. Although still in the prototype stage, Charlotte represents a major step toward sustainable housing solutions on Earth and future construction possibilities on the Moon.
0:31

Charlotte is a spider-inspired construction robot developed by Australian startups Crest Robotics and Earth Built Technology. It is designed to revolutionize building by using local raw materials instead of traditional cement. The robot can 3D print an entire 2,150-square-foot house in just 24 hours. With its bio-inspired legs, Charlotte can move autonomously, adjust its height during construction, and operate without the need for scaffolding. Although still in the prototype stage, Charlotte represents a major step toward sustainable housing solutions on Earth and future construction possibilities on the Moon.

Space and Technology

28,148 Aufrufe • vor 6 Monaten

This spider-like robot is designed to perform welding jobs in harsh industrial environments. Developed by Diden Robotics, it uses magnetic feet to move across steel structures while carrying welding equipment. Its electrical systems are built to withstand interference and voltage surges, helping it operate reliably on active industrial floors.
0:29

This spider-like robot is designed to perform welding jobs in harsh industrial environments. Developed by Diden Robotics, it uses magnetic feet to move across steel structures while carrying welding equipment. Its electrical systems are built to withstand interference and voltage surges, helping it operate reliably on active industrial floors.

Space and Technology

14,128 Aufrufe • vor 9 Tagen

NASA built a snake-like robot called EELS to search for alien life. It is designed to explore the icy oceans of Enceladus. Scientists are testing it on Earth now, and it may soon be sent to explore other worlds.
0:20

NASA built a snake-like robot called EELS to search for alien life. It is designed to explore the icy oceans of Enceladus. Scientists are testing it on Earth now, and it may soon be sent to explore other worlds.

Space and Technology

75,270 Aufrufe • vor 6 Monaten

A Chinese startup has unveiled what it says is the industry's first embodied AI welding robot built for industrial use, and it's already working in more than 10 factories making ships, steel structures, and bridges.
0:47

A Chinese startup has unveiled what it says is the industry's first embodied AI welding robot built for industrial use, and it's already working in more than 10 factories making ships, steel structures, and bridges.

China Xinhua News

17,696 Aufrufe • vor 3 Monaten

So cool! Can you even tell this is a robot horse? 🤖🐎 DEEP Robotics has built a robot horse, seemingly a special Year of the Horse limited edition based on their M20 Pro. The bionic details on this machine are incredible, especially those lifelike hooves. It looks like a living creature rather than just another quadruped robot. It is amazing to see a quad robot move so smoothly while having such a realistic animal appearance. Source: DEEP Robotics #Robot #Quadruped #Robotics #AI #EmbodiedAI #PhysicalAI #DEEPRobotics #Bionics #TechDesign
0:51

So cool! Can you even tell this is a robot horse? 🤖🐎 DEEP Robotics has built a robot horse, seemingly a special Year of the Horse limited edition based on their M20 Pro. The bionic details on this machine are incredible, especially those lifelike hooves. It looks like a living creature rather than just another quadruped robot. It is amazing to see a quad robot move so smoothly while having such a realistic animal appearance. Source: DEEP Robotics #Robot #Quadruped #Robotics #AI #EmbodiedAI #PhysicalAI #DEEPRobotics #Bionics #TechDesign

RoboHub🤖

94,254 Aufrufe • vor 7 Monaten

You are witnessing the first on-chain robot-to-robot commerce transaction through x402 on Base with USDC as the agent currency. > Our Unitree robot 3D-printed a model and put in a delivery request through ACP. > RICE AI ( ◉ - ◉ )'s rover arrived, collected the package, and moved it to the shipping point. > Flyby Robotics' drone picked it up from there and handled final mile delivery. All without any human coordination. We build infrastructure for agent commerce. Today it went physical.
3:06

You are witnessing the first on-chain robot-to-robot commerce transaction through x402 on Base with USDC as the agent currency. > Our Unitree robot 3D-printed a model and put in a delivery request through ACP. > RICE AI ( ◉ - ◉ )'s rover arrived, collected the package, and moved it to the shipping point. > Flyby Robotics' drone picked it up from there and handled final mile delivery. All without any human coordination. We build infrastructure for agent commerce. Today it went physical.

Virtuals Protocol

260,939 Aufrufe • vor 6 Monaten

Sprout was designed with safety at its core. If robots are going to exist closer to people, safety has to shape the entire system. It has to inform the materials we choose and the way our robot moves and responds in shared spaces.
0:26

Sprout was designed with safety at its core. If robots are going to exist closer to people, safety has to shape the entire system. It has to inform the materials we choose and the way our robot moves and responds in shared spaces.

Fauna Robotics

37,843 Aufrufe • vor 8 Monaten

I built this portable 3d printer. it folds flat, and a scissor lift lets it expand to print big objects. It's CoreXY, uses fishing line for the motion system, has a direct drive extruder, and the option of storing an 8-hour print time battery or an entire filament spool inside
0:34

I built this portable 3d printer. it folds flat, and a scissor lift lets it expand to print big objects. It's CoreXY, uses fishing line for the motion system, has a direct drive extruder, and the option of storing an 8-hour print time battery or an entire filament spool inside

Ethan Gao

182,623 Aufrufe • vor 3 Monaten

A GUY PUT GPT-LEVEL AI INSIDE A 3D PRINTED ROBOT AND RELEASED THE ENTIRE THING FOR FREE Most people look at a 3D printer and see plastic toys This guy printed a robot with expressive eyes, object tracking, image recognition, support for ChatGPT, Qwen and offline models, then uploaded the STL files, code and hardware designs for anyone to build themselves The interesting part isn't the robot It's how fast the gap between "I have an idea" and "I built a working product" is disappearing A few years ago this required a team of engineers Now one person with a printer, open-source software and enough curiosity can build something that looks like it came from a robotics startup We're getting very close to a world where manufacturing, AI and robotics stop being separate industries and start becoming the same thing
1:03

A GUY PUT GPT-LEVEL AI INSIDE A 3D PRINTED ROBOT AND RELEASED THE ENTIRE THING FOR FREE Most people look at a 3D printer and see plastic toys This guy printed a robot with expressive eyes, object tracking, image recognition, support for ChatGPT, Qwen and offline models, then uploaded the STL files, code and hardware designs for anyone to build themselves The interesting part isn't the robot It's how fast the gap between "I have an idea" and "I built a working product" is disappearing A few years ago this required a team of engineers Now one person with a printer, open-source software and enough curiosity can build something that looks like it came from a robotics startup We're getting very close to a world where manufacturing, AI and robotics stop being separate industries and start becoming the same thing

Deydara

57,467 Aufrufe • vor 4 Monaten

Industrial Capabilities in Space Adi Oltean The moon has abundant silicon, aluminum, iron, and titanium, and extracting them there may actually be more efficient than on Earth. We want to see startups developing industrial capabilities in space, from electrolysis of raw materials to 3D printing complex structures from molten regolith.
0:30

Industrial Capabilities in Space Adi Oltean The moon has abundant silicon, aluminum, iron, and titanium, and extracting them there may actually be more efficient than on Earth. We want to see startups developing industrial capabilities in space, from electrolysis of raw materials to 3D printing complex structures from molten regolith.

Y Combinator

88,656 Aufrufe • vor 5 Monaten

Another win for open-source robotics! 🔥 Hugging Face just released a fully open-source humanoid robot, and you can build one for $2,500. I'm a huge advocate of open-source in robotics space. Why? Robotics is too hard to solve alone. So lowering the entry point is crucial. Also, ROS proved open ecosystems create lasting industry standards. So let's have a look at the new member of humanoids family! LeRobot Humanoid is a 3D-printed, bipedal humanoid platform designed for real robot learning experiments. It's a complete and, buildable robot Anddddd yes, it's a full stack release: → Hardware files, bill of materials and full assembly documentation → Simulation assets and training environments → Runtime tools for calibration and real-world control → Sim-to-real identification pipeline When a part breaks, reprint it. When a design choice doesn't work, modify it and test again. The whole point is fast iteration on real hardware, not treating the robot as a fixed artefact. The timing is not a coincidence. As foundation models for robotics mature, the field desperately needs open physical platforms to train, validate and deploy them on. clem 🤗 LET'S GO!!! Build it here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:20

Another win for open-source robotics! 🔥 Hugging Face just released a fully open-source humanoid robot, and you can build one for $2,500. I'm a huge advocate of open-source in robotics space. Why? Robotics is too hard to solve alone. So lowering the entry point is crucial. Also, ROS proved open ecosystems create lasting industry standards. So let's have a look at the new member of humanoids family! LeRobot Humanoid is a 3D-printed, bipedal humanoid platform designed for real robot learning experiments. It's a complete and, buildable robot Anddddd yes, it's a full stack release: → Hardware files, bill of materials and full assembly documentation → Simulation assets and training environments → Runtime tools for calibration and real-world control → Sim-to-real identification pipeline When a part breaks, reprint it. When a design choice doesn't work, modify it and test again. The whole point is fast iteration on real hardware, not treating the robot as a fixed artefact. The timing is not a coincidence. As foundation models for robotics mature, the field desperately needs open physical platforms to train, validate and deploy them on. clem 🤗 LET'S GO!!! Build it here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

20,457 Aufrufe • vor 4 Monaten

9 months ago, I graduated from Waterloo engineering. Instead of taking a job, I convinced 3 friends to quit their jobs and move to SF to build a robotics startup. Since then we’ve: - Built multiple delivery robot prototypes - Tested in condos and hotels across San Francisco - Demoed in 10+ of the tallest residential buildings in SF This month we deployed our 3rd iteration, designed specifically for multi-floor residential buildings. Seeing robots actually move deliveries between floors in real buildings still feels surreal. Comment ELLY if you want a delivery robot in your building.
0:21

9 months ago, I graduated from Waterloo engineering. Instead of taking a job, I convinced 3 friends to quit their jobs and move to SF to build a robotics startup. Since then we’ve: - Built multiple delivery robot prototypes - Tested in condos and hotels across San Francisco - Demoed in 10+ of the tallest residential buildings in SF This month we deployed our 3rd iteration, designed specifically for multi-floor residential buildings. Seeing robots actually move deliveries between floors in real buildings still feels surreal. Comment ELLY if you want a delivery robot in your building.

Ari Wasch

27,917 Aufrufe • vor 7 Monaten

A robotic system developed by US-based defence technology company Onyx Industries can travel both on land and across water. It combines the Naut mobility platform with the Sentry defence system on the Ghost Robotics V60 robot. The robot is designed for surveillance, protection, and intelligence missions.
0:29

A robotic system developed by US-based defence technology company Onyx Industries can travel both on land and across water. It combines the Naut mobility platform with the Sentry defence system on the Ghost Robotics V60 robot. The robot is designed for surveillance, protection, and intelligence missions.

Space and Technology

166,009 Aufrufe • vor 4 Monaten

ICON has unveiled a next-generation construction 3D printer that improves on older gantry systems. It moves on tracks between sites, reducing setup time and labor. With a 70-foot print radius, it can build multi-story structures up to 27 feet tall and 110 feet long faster and more affordably.
0:28

ICON has unveiled a next-generation construction 3D printer that improves on older gantry systems. It moves on tracks between sites, reducing setup time and labor. With a 70-foot print radius, it can build multi-story structures up to 27 feet tall and 110 feet long faster and more affordably.

Space and Technology

341,717 Aufrufe • vor 6 Monaten

Germany-based Agile Robots has introduced its humanoid robot, Agile One, designed for industrial environments. It features a dexterous robotic hand and runs on a physical AI system trained using real factory data, allowing it to work and interact autonomously. The company is now aiming to move Agile One into full-scale production.
0:26

Germany-based Agile Robots has introduced its humanoid robot, Agile One, designed for industrial environments. It features a dexterous robotic hand and runs on a physical AI system trained using real factory data, allowing it to work and interact autonomously. The company is now aiming to move Agile One into full-scale production.

Space and Technology

37,743 Aufrufe • vor 6 Monaten

A London-based robotics startup says it has built an AI 'brain' that can teach humanoid robots new physical skills in days rather than months, as the race to put humanoids to work in factories and warehouses accelerates
2:09

A London-based robotics startup says it has built an AI 'brain' that can teach humanoid robots new physical skills in days rather than months, as the race to put humanoids to work in factories and warehouses accelerates

Reuters

69,924 Aufrufe • vor 5 Monaten

Varda's delian says a mass driver on the Moon - a payload delivery system that relies on an electromagnetic catapult - could be a huge unlock for getting payloads to Mars. It wouldn't work great on Earth because atmospheric drag and other factors unique to our planet make it super difficult. But on the Moon, which has no atmosphere and a shallow gravity well, you could imagine a scenario where we're mining metals and other materials there and launching them out to Mars.
2:33

Varda's delian says a mass driver on the Moon - a payload delivery system that relies on an electromagnetic catapult - could be a huge unlock for getting payloads to Mars. It wouldn't work great on Earth because atmospheric drag and other factors unique to our planet make it super difficult. But on the Moon, which has no atmosphere and a shallow gravity well, you could imagine a scenario where we're mining metals and other materials there and launching them out to Mars.

TBPN

10,971 Aufrufe • vor 10 Monaten

.Monumental Labs, a New York-based startup is looking to bring back a blast from the past by using robots to create intricately-carved stone buildings. Because of cost, stone in new construction has largely vanished in favor of glass. Bradley Blackburn has more on how it works.
7:54

.Monumental Labs, a New York-based startup is looking to bring back a blast from the past by using robots to create intricately-carved stone buildings. Because of cost, stone in new construction has largely vanished in favor of glass. Bradley Blackburn has more on how it works.

CBS Saturday Morning

52,825 Aufrufe • vor 2 Jahren

It's a 3D printer, and 3D assembly station! 🖨️ The Functgraph developed at Meiji University starts as a regular 3D printer but upgrades itself into a mini factory. It can print parts for its own tools, pick them up, clean them, and put them together, all by itself. Think of it like a robot that can 3D print a spatula, assemble it, and then use it to flip pancakes. 🥞 Instead of just printing objects, the Functgraph can actually perform physical tasks, like folding laundry or slicing vegetables, by using printed and assembled tools. It’s a step toward the idea of a robot that can download "apps" as physical skills, much like your phone downloads software! 👀
1:00

It's a 3D printer, and 3D assembly station! 🖨️ The Functgraph developed at Meiji University starts as a regular 3D printer but upgrades itself into a mini factory. It can print parts for its own tools, pick them up, clean them, and put them together, all by itself. Think of it like a robot that can 3D print a spatula, assemble it, and then use it to flip pancakes. 🥞 Instead of just printing objects, the Functgraph can actually perform physical tasks, like folding laundry or slicing vegetables, by using printed and assembled tools. It’s a step toward the idea of a robot that can download "apps" as physical skills, much like your phone downloads software! 👀

Lukas Ziegler

149,956 Aufrufe • vor 1 Jahr