Video wird geladen...

Video konnte nicht geladen werden

Zur Startseite

Humanoid robotics has officially entered its pole dancing phase. This prototype performs a choreographed full body sequence while gripping a fixed support pole and moving on a rotating platform. The hip knee and torso coordination is interesting. But the rig also means this is not proof of unsupported balance...

techniahqrobot's profile picture

TechniaHQ | humanoid robots

15,414 subscribers

59,500 Aufrufe • vor 1 Monat •via X (Twitter)

LIVE

Anya Rossi• Live Now

Private livecam show

0 Kommentare

Keine Kommentare verfügbar

Kommentare vom Original-Post werden hier angezeigt

Ähnliche Videos

If you watch the latest Optimus dancing video in slow motion, you’ll notice that it’s not just dancing, but it’s hopping and balancing on one foot. Also, the string in the back isn’t even holding Tesla Bot up! This level of dynamic balance and control is EXTREMELY difficult to achieve for a humanoid robot. What Tesla is doing right now with Optimus is years ahead of what people realize.
0:15

If you watch the latest Optimus dancing video in slow motion, you’ll notice that it’s not just dancing, but it’s hopping and balancing on one foot. Also, the string in the back isn’t even holding Tesla Bot up! This level of dynamic balance and control is EXTREMELY difficult to achieve for a humanoid robot. What Tesla is doing right now with Optimus is years ahead of what people realize.

Teslaconomics

117,068 Aufrufe • vor 1 Jahr

Who are you drafting for your robotic starting eleven? ⚽️🤖 Both Booster Robotics and Boston Dynamics are showing off serious capabilities ahead of the World Cup. While Booster’s new T2 is building on a championship-winning RoboCup pedigree, Hyundai is proving the electric Atlas can handle complex full-body coordination and dynamic balance in real time.
0:17

Who are you drafting for your robotic starting eleven? ⚽️🤖 Both Booster Robotics and Boston Dynamics are showing off serious capabilities ahead of the World Cup. While Booster’s new T2 is building on a championship-winning RoboCup pedigree, Hyundai is proving the electric Atlas can handle complex full-body coordination and dynamic balance in real time.

Humanoids daily

14,928 Aufrufe • vor 2 Monaten

No this is not a tornado...This video captures a scud cloud interacting with a slow-moving updraft along the leading edge of a storm's outflow boundary. While local terrain can sometimes generate minor, localized circulations or "gustnadoes" in these areas, the rising motion here is far too slow to be tornadic. This visually intimidating feature is just a normal part of storm dynamics and is not a tornado.
0:19

No this is not a tornado...This video captures a scud cloud interacting with a slow-moving updraft along the leading edge of a storm's outflow boundary. While local terrain can sometimes generate minor, localized circulations or "gustnadoes" in these areas, the rising motion here is far too slow to be tornadic. This visually intimidating feature is just a normal part of storm dynamics and is not a tornado.

The Weather Channel

50,552 Aufrufe • vor 1 Monat

Engineers: “This is a breakthrough in soft robotics.” Twitter: “Bro built an AI vibrator.” 🤦‍♂️ Researchers at the University of Southern Denmark created a soft robot that moves by inflating and contracting its body like a worm. Jokes aside… robots like this could actually be useful for rescue missions and environments where traditional robots fail. But let’s be honest: you already know what most comment sections are going to talk about 💀 🎥 Media: SDU Soft Robotics ⚠️ This content is shared for informational purposes only. CTO Robotics Media is a media platform and does not own or develop the technology shown. Credit belongs to the original creators.
0:12

Engineers: “This is a breakthrough in soft robotics.” Twitter: “Bro built an AI vibrator.” 🤦‍♂️ Researchers at the University of Southern Denmark created a soft robot that moves by inflating and contracting its body like a worm. Jokes aside… robots like this could actually be useful for rescue missions and environments where traditional robots fail. But let’s be honest: you already know what most comment sections are going to talk about 💀 🎥 Media: SDU Soft Robotics ⚠️ This content is shared for informational purposes only. CTO Robotics Media is a media platform and does not own or develop the technology shown. Credit belongs to the original creators.

CTO ROBOTICS Media

419,719 Aufrufe • vor 2 Monaten

A new wheeled humanoid robot DARWIN-01 From Shenzhen Standard Robotics. This is a humanoid robot for industrial manufacturing and warehouses. The foldable body can adapt to a variety of spatial operations, and the end effector can also be switched to adapt to personalized business goals. The maximum load is 10kg. The universal wheels can shuttle between shelves, workshops and assembly lines at will, with a speed greater than 2m/s. Automatic charging or battery replacement, with a battery life of 12 hours.
0:18

A new wheeled humanoid robot DARWIN-01 From Shenzhen Standard Robotics. This is a humanoid robot for industrial manufacturing and warehouses. The foldable body can adapt to a variety of spatial operations, and the end effector can also be switched to adapt to personalized business goals. The maximum load is 10kg. The universal wheels can shuttle between shelves, workshops and assembly lines at will, with a speed greater than 2m/s. Automatic charging or battery replacement, with a battery life of 12 hours.

CyberRobo

39,350 Aufrufe • vor 1 Jahr

Beijing Innovation Center of Humanoid Robotics(X-Humanoid) just closed a massive 700M RMB ($97M) funding round. 💰🤖 They’re also teasing the "TienKung" 3.0, coming off the back of some wild performance milestones from their current fleet. ➤ The Funding: Backed by big names like Baidu and Beijing’s AI Industry Fund, this round shifts the center from R&D into serious commercial scaling. ➤ Proven Track Record: Their "TienKung Ultra" already bagged the first-ever humanoid half-marathon and holds a 21.5s 100m sprint record. ➤ Industry Ready: Their TianYi 2.0 platform is already hitting the floor in factories and warehouses through partnerships with companies like Cummins and Bayer. ➤ What’s Next: This cash is going straight into making their "TienKung" and "HuiSi" platforms fully autonomous and ready for real-world labor. It’s clear they aren't just building lab projects anymore—these bots are headed for the assembly line. Source: Beijing Innovation Center of Humanoid Robotics(X-Humanoid) #Robotics #Humanoid #AI #EmbodiedAI #PhysicalAI #TienKung #XHumanoid
0:14

Beijing Innovation Center of Humanoid Robotics(X-Humanoid) just closed a massive 700M RMB ($97M) funding round. 💰🤖 They’re also teasing the "TienKung" 3.0, coming off the back of some wild performance milestones from their current fleet. ➤ The Funding: Backed by big names like Baidu and Beijing’s AI Industry Fund, this round shifts the center from R&D into serious commercial scaling. ➤ Proven Track Record: Their "TienKung Ultra" already bagged the first-ever humanoid half-marathon and holds a 21.5s 100m sprint record. ➤ Industry Ready: Their TianYi 2.0 platform is already hitting the floor in factories and warehouses through partnerships with companies like Cummins and Bayer. ➤ What’s Next: This cash is going straight into making their "TienKung" and "HuiSi" platforms fully autonomous and ready for real-world labor. It’s clear they aren't just building lab projects anymore—these bots are headed for the assembly line. Source: Beijing Innovation Center of Humanoid Robotics(X-Humanoid) #Robotics #Humanoid #AI #EmbodiedAI #PhysicalAI #TienKung #XHumanoid

RoboHub🤖

17,147 Aufrufe • vor 6 Monaten

Halo: Combat Evolved VR Mod Out Now! This is a big one... livingfray has released a VR mod for Halo: Combat Evolved (the original, not the MCC) His mod includes full 6DOF, synced eye rendering, motion control support and more!
0:17

Halo: Combat Evolved VR Mod Out Now! This is a big one... livingfray has released a VR mod for Halo: Combat Evolved (the original, not the MCC) His mod includes full 6DOF, synced eye rendering, motion control support and more!

Flat2VR Modding

87,760 Aufrufe • vor 1 Jahr

Huawei's new 3D lock screen wallpaper is actually pretty interesting. Unlike iPhone's Spatial Photo, which creates a fixed stereoscopic depth effect from a photo, this lets you scan an object 360°, generate a full 3D Gaussian Splatting asset, and use that as your lock screen. Tilt the phone and you're moving through a reconstructed 3D scene, not a fixed stereo image. The part worth paying attention to: 3D capture moving out of creative pipelines and into everyday phone personalization. That's a different kind of adoption curve.
0:16

Huawei's new 3D lock screen wallpaper is actually pretty interesting. Unlike iPhone's Spatial Photo, which creates a fixed stereoscopic depth effect from a photo, this lets you scan an object 360°, generate a full 3D Gaussian Splatting asset, and use that as your lock screen. Tilt the phone and you're moving through a reconstructed 3D scene, not a fixed stereo image. The part worth paying attention to: 3D capture moving out of creative pipelines and into everyday phone personalization. That's a different kind of adoption curve.

KIRI Engine - 3D Scanner App

185,665 Aufrufe • vor 2 Monaten

This is a baby at 10 weeks. He or she is moving around, full of life. Not a “clump of cells,” but a human child with unique DNA and a right to life. The abortion pill kills babies like this one. They are starved to death and flushed like trash. Ban this deadly drug now.
0:16

This is a baby at 10 weeks. He or she is moving around, full of life. Not a “clump of cells,” but a human child with unique DNA and a right to life. The abortion pill kills babies like this one. They are starved to death and flushed like trash. Ban this deadly drug now.

Live Action

11,299 Aufrufe • vor 1 Monat

Such interesting flight paths and a lot of tight turns 😉 This is not normal, this is geoengineering! But I'm sure all the aviators and meteorologists will have something to say in the comments, explaining why this is completely normal and how we all failed physics or science..
0:17

Such interesting flight paths and a lot of tight turns 😉 This is not normal, this is geoengineering! But I'm sure all the aviators and meteorologists will have something to say in the comments, explaining why this is completely normal and how we all failed physics or science..

nogps

14,238 Aufrufe • vor 1 Monat

The most interesting part of this robot is not the arm. It is the gripper. Instead of pushing the whole robot faster, this setup adds speed at the end effector. The gripper itself becomes a moving axis that can accelerate independently of the arm. That changes the physics of the system. • Faster cycle times without stressing the robot structure • Less inertia to fight against • Motion where it actually matters, at the tool center point It is a reminder that many performance limits in robotics are not solved by bigger motors, but by smarter mechanics. ——- Weekly robotics and AI insights. Subscribe free:
0:14

The most interesting part of this robot is not the arm. It is the gripper. Instead of pushing the whole robot faster, this setup adds speed at the end effector. The gripper itself becomes a moving axis that can accelerate independently of the arm. That changes the physics of the system. • Faster cycle times without stressing the robot structure • Less inertia to fight against • Motion where it actually matters, at the tool center point It is a reminder that many performance limits in robotics are not solved by bigger motors, but by smarter mechanics. ——- Weekly robotics and AI insights. Subscribe free:

Ilir Aliu

46,508 Aufrufe • vor 6 Tagen

🚨 JUST IN: New footage has been released of a United 767 CLIPPING a light pole and a delivery trucks while landing at Newark Airport This could’ve been SO much worse. Thank God it wasn’t. The delivery driver has also been discharged from the hospital after suffering minor cuts from the incident. Runway 29, which is the runway flight 169 was landing on, is infrequently used and is on the short-side for a 767, per reports.
0:15

🚨 JUST IN: New footage has been released of a United 767 CLIPPING a light pole and a delivery trucks while landing at Newark Airport This could’ve been SO much worse. Thank God it wasn’t. The delivery driver has also been discharged from the hospital after suffering minor cuts from the incident. Runway 29, which is the runway flight 169 was landing on, is infrequently used and is on the short-side for a 767, per reports.

Nick Sortor

262,401 Aufrufe • vor 3 Monaten

If you like River City / Kunio Kun, you should check this. This is a project I've been following for a while, and helping with technical support, and finally a demo has been released. The combat is frantic – which is good – but the difficulty is quite high. The possibility of mounting a fallen enemy and punching him is a lot of fun, haha. Full video and download
0:15

If you like River City / Kunio Kun, you should check this. This is a project I've been following for a while, and helping with technical support, and finally a demo has been released. The combat is frantic – which is good – but the difficulty is quite high. The possibility of mounting a fallen enemy and punching him is a lot of fun, haha. Full video and download

O Ilusionista - Commissions OPEN ⬇️ ↘️ ➡️

16,114 Aufrufe • vor 7 Monaten

China is scaling humanoid robotics at an insane speed. Super realistic robots from Ex-Robots are now reportedly entering mass production 🤖 - Not prototypes. - Not lab experiments. - Actual production. The biggest shift happening in robotics isn’t just intelligence anymore. It’s making robots look and behave socially acceptable around humans. And honestly… we’re reaching the point where some people may not immediately realize they’re talking to a robot. Exciting future or uncomfortable future? Media : Ex-Robots ⚠️ This content is shared for informational purposes only. CTO Robotics Media is a media platform and does not own or develop the technology shown. Credit belongs to the original creators.
0:14

China is scaling humanoid robotics at an insane speed. Super realistic robots from Ex-Robots are now reportedly entering mass production 🤖 - Not prototypes. - Not lab experiments. - Actual production. The biggest shift happening in robotics isn’t just intelligence anymore. It’s making robots look and behave socially acceptable around humans. And honestly… we’re reaching the point where some people may not immediately realize they’re talking to a robot. Exciting future or uncomfortable future? Media : Ex-Robots ⚠️ This content is shared for informational purposes only. CTO Robotics Media is a media platform and does not own or develop the technology shown. Credit belongs to the original creators.

CTO ROBOTICS Media

13,386 Aufrufe • vor 2 Monaten

**Traditional Engine Order Telegraphs:** The bridge unit and the engine-room unit are connected by two chains (or wire cables) that run through conduits over sprockets, forming a continuous loop. When the bridge officer moves the handle, it turns a sprocket that pulls the chain, which in turn turns the corresponding sprocket and pointer in the engine room. This classic system does not require electricity; it relies on a direct physical linkage, ensuring that both dials always mirror each other. Here’s a typical sequence of operations: The bridge officer grabs the handle and swings it to the command position, for example, "Half Ahead." This movement not only moves the engine-room pointer but also rings a bell or gong to alert the engineers. The engineers then adjust their own handle to match the position indicated by the bridge officer; this movement serves as an acknowledgment and rings the bell back on the bridge, confirming that the order has been received and understood. Only after this acknowledgment do the engineers work the throttle and reversing gear to carry out the order. It is common practice to first execute a full sweep of the handle, moving it all the way to one extreme and back before settling on the actual command position. This exaggerated motion serves two purposes: it rings the gong loudly and unmistakably, ensuring everyone is aware that a new order is coming, and it checks that the mechanism and chains are not stuck or slack. On some ships, this full sweep also signifies an important or urgent change (such as switching from ahead to astern), emphasizing to the crew that they need to pay attention because the situation is critical. After completing this sweep, the handle is adjusted to the desired position. This telegraph is from the Steamship Shieldhall (video credit as well). Go check her out on
0:10

**Traditional Engine Order Telegraphs:** The bridge unit and the engine-room unit are connected by two chains (or wire cables) that run through conduits over sprockets, forming a continuous loop. When the bridge officer moves the handle, it turns a sprocket that pulls the chain, which in turn turns the corresponding sprocket and pointer in the engine room. This classic system does not require electricity; it relies on a direct physical linkage, ensuring that both dials always mirror each other. Here’s a typical sequence of operations: The bridge officer grabs the handle and swings it to the command position, for example, "Half Ahead." This movement not only moves the engine-room pointer but also rings a bell or gong to alert the engineers. The engineers then adjust their own handle to match the position indicated by the bridge officer; this movement serves as an acknowledgment and rings the bell back on the bridge, confirming that the order has been received and understood. Only after this acknowledgment do the engineers work the throttle and reversing gear to carry out the order. It is common practice to first execute a full sweep of the handle, moving it all the way to one extreme and back before settling on the actual command position. This exaggerated motion serves two purposes: it rings the gong loudly and unmistakably, ensuring everyone is aware that a new order is coming, and it checks that the mechanism and chains are not stuck or slack. On some ships, this full sweep also signifies an important or urgent change (such as switching from ahead to astern), emphasizing to the crew that they need to pay attention because the situation is critical. After completing this sweep, the handle is adjusted to the desired position. This telegraph is from the Steamship Shieldhall (video credit as well). Go check her out on

Bart 🌊⚓️

107,192 Aufrufe • vor 11 Tagen

The Pelvic Whip👇 A Big League pitcher’s pelvis can rotates faster that 900 Degrees per second To maximize that speed with proper timing, many of our athletes and coaches like the feeling of keeping the pelvis closed THEN Exploding! BUT, if the front side groin is tight, the lead leg will just drag the pelvis open which is a much slower version of pelvic rotation To get around this, some guys land in a valgus position (Knee Caved in) on the front leg since you don’t need full Adductor Range of Motion to do this. And Some step across body which can also work around this. This Test / Exercise To see how your groin affects your pelvis, hold your knee out while performing this exercise. You will know immediately if this affects you or not! 👊
0:17

The Pelvic Whip👇 A Big League pitcher’s pelvis can rotates faster that 900 Degrees per second To maximize that speed with proper timing, many of our athletes and coaches like the feeling of keeping the pelvis closed THEN Exploding! BUT, if the front side groin is tight, the lead leg will just drag the pelvis open which is a much slower version of pelvic rotation To get around this, some guys land in a valgus position (Knee Caved in) on the front leg since you don’t need full Adductor Range of Motion to do this. And Some step across body which can also work around this. This Test / Exercise To see how your groin affects your pelvis, hold your knee out while performing this exercise. You will know immediately if this affects you or not! 👊

Armored Heat

14,598 Aufrufe • vor 3 Monaten

Am I dreaming or is this actually Vancouver?! After 10pm on a Monday, and people are having … fun? OUTSIDE? Hosting the World Cup has this city realizing its full potential.
0:12

Am I dreaming or is this actually Vancouver?! After 10pm on a Monday, and people are having … fun? OUTSIDE? Hosting the World Cup has this city realizing its full potential.

Jarryd Jäger

120,159 Aufrufe • vor 2 Monaten

LEONARDO, also called LEO, was built by researchers at Caltech’s Center for Autonomous Systems and Technologies. Its full name means LEgs ONboARD drOne. The idea is simple but unusual: • Build a small biped robot • Give it drone-style thrust • Use the legs for ground contact • Use the propellers for balance and lift • Combine walking, hopping and flying in one system LEO is basically a hybrid between a walking robot and a flying drone. How it was built: • Two lightweight legs • Three actuated joints in each leg • Four propeller thrusters near the shoulders • A lightweight body • Leg motors for ground movement • Propellers for balance, lift and aerial control • Real-time control software that synchronizes the legs and propellers How it walks: • The legs move the robot forward • The feet touch the ground like a normal biped • The propellers constantly correct balance from above • The robot can stay upright even in unstable situations • The thrust reduces the risk of falling during difficult motions How it flies: • The legs stop being the main locomotion system • The four propellers generate lift • The robot behaves more like a drone • It can take off, fly over obstacles and land back on its legs What makes it different: • It does not walk like a normal humanoid • It does not fly like a normal drone • It blends both systems • The legs handle contact with the ground • The propellers act like fast stabilizers • The control system decides how much help comes from the legs and how much comes from thrust That is why LEO can: • Walk • Hop • Fly over obstacles • Ride a skateboard • Balance on a slackline The key idea is walking with aerial stabilization.
0:12

LEONARDO, also called LEO, was built by researchers at Caltech’s Center for Autonomous Systems and Technologies. Its full name means LEgs ONboARD drOne. The idea is simple but unusual: • Build a small biped robot • Give it drone-style thrust • Use the legs for ground contact • Use the propellers for balance and lift • Combine walking, hopping and flying in one system LEO is basically a hybrid between a walking robot and a flying drone. How it was built: • Two lightweight legs • Three actuated joints in each leg • Four propeller thrusters near the shoulders • A lightweight body • Leg motors for ground movement • Propellers for balance, lift and aerial control • Real-time control software that synchronizes the legs and propellers How it walks: • The legs move the robot forward • The feet touch the ground like a normal biped • The propellers constantly correct balance from above • The robot can stay upright even in unstable situations • The thrust reduces the risk of falling during difficult motions How it flies: • The legs stop being the main locomotion system • The four propellers generate lift • The robot behaves more like a drone • It can take off, fly over obstacles and land back on its legs What makes it different: • It does not walk like a normal humanoid • It does not fly like a normal drone • It blends both systems • The legs handle contact with the ground • The propellers act like fast stabilizers • The control system decides how much help comes from the legs and how much comes from thrust That is why LEO can: • Walk • Hop • Fly over obstacles • Ride a skateboard • Balance on a slackline The key idea is walking with aerial stabilization.

Techniahqrobot | humanoid robots

135,515 Aufrufe • vor 1 Monat