Загрузка видео...

Не удалось загрузить видео

На главную

Introducing the Maker Arm the most capable 6 axis robot arm under $1000 Fully 3D printed structure plus QDD actuators

Ryan_Resolution's profile picture

Ryan Chan

2,617 subscribers

66,847 просмотров • 27 дней назад •via X (Twitter)

Наука и технологииОбразование
LIVE

Anya Rossi• Live Now

Private livecam show

Комментарии: 0

Нет доступных комментариев

Здесь появятся комментарии из оригинального поста

Похожие видео

introducing lattice a low-cost robot arm with a modular, detachable gripper so the robot can swap its own tools the adapter is $14 if you already have an so101 arm, and about $140 to build the full system from scratch it’s now fully open source
0:27

introducing lattice a low-cost robot arm with a modular, detachable gripper so the robot can swap its own tools the adapter is $14 if you already have an so101 arm, and about $140 to build the full system from scratch it’s now fully open source

ahad

40,451 просмотров • 3 месяцев назад

Introducing AutoFAB: an AI engineer in a robot body. 3D printers only print when someone's standing there to pull the part off the bed. So most machines sit idle most of the time. With AutoFAB, a robot arm keeps your printer farm running 24/7. Link ->
1:15

Introducing AutoFAB: an AI engineer in a robot body. 3D printers only print when someone's standing there to pull the part off the bed. So most machines sit idle most of the time. With AutoFAB, a robot arm keeps your printer farm running 24/7. Link ->

Ansel Dias

14,322 просмотров • 28 дней назад

After the gimbal, the next thing I now want is a 6-axis industrial robotic arm
0:41

After the gimbal, the next thing I now want is a 6-axis industrial robotic arm

Vishakh Ranotra

11,588 просмотров • 8 месяцев назад

The $600 Open-Source Home Robot🤖 Meet AlohaMini, the new dual-arm mobile robot designed to make real-world manipulation and embodied AI research accessible. This bot is fully 3D-printable and aimed at home builders and research labs. Key Features: 💰 Cost: The Bill of Materials (BOM) totals around $600 (USD) for self-printed parts, making it highly accessible. 🦾 Hardware: Dual-arm mobile base with a motorized vertical lift (0–60 cm travel). 💻 Software: Completely open-source hardware and software, compatible out-of-the-box with the LeRobot framework. The platform supports a fully 3D-printed Mini and a stiffer Pro model (hybrid materials). It assembles in approximately 60 minutes. 🔗 GitHub Open-Source Code & Files:
0:53

The $600 Open-Source Home Robot🤖 Meet AlohaMini, the new dual-arm mobile robot designed to make real-world manipulation and embodied AI research accessible. This bot is fully 3D-printable and aimed at home builders and research labs. Key Features: 💰 Cost: The Bill of Materials (BOM) totals around $600 (USD) for self-printed parts, making it highly accessible. 🦾 Hardware: Dual-arm mobile base with a motorized vertical lift (0–60 cm travel). 💻 Software: Completely open-source hardware and software, compatible out-of-the-box with the LeRobot framework. The platform supports a fully 3D-printed Mini and a stiffer Pro model (hybrid materials). It assembles in approximately 60 minutes. 🔗 GitHub Open-Source Code & Files:

RoboHub🤖

41,670 просмотров • 10 месяцев назад

The quadruped you can assemble yourself. Stella is an educational quadruped robot developed by Ahead. Designed for hands-on learning and self-assembly, the robot uses durable 3D-printed components. Ideal for all education levels, it is easy to repair, infinitely extendable, and equipped with advanced hardware and software. Despite its compact design, Stella is versatile, capable of operating in various environments and even carrying payloads like an optional robotic arm. A powerful tool for exploring robotics.
0:32

The quadruped you can assemble yourself. Stella is an educational quadruped robot developed by Ahead. Designed for hands-on learning and self-assembly, the robot uses durable 3D-printed components. Ideal for all education levels, it is easy to repair, infinitely extendable, and equipped with advanced hardware and software. Despite its compact design, Stella is versatile, capable of operating in various environments and even carrying payloads like an optional robotic arm. A powerful tool for exploring robotics.

Circuit

23,215 просмотров • 1 год назад

Trump’s crypto arm invested in MOVE. Now the token has been suspended, the market maker is banned, and insiders are under scrutiny. What does this say about political protection in crypto?
1:09

Trump’s crypto arm invested in MOVE. Now the token has been suspended, the market maker is banned, and insiders are under scrutiny. What does this say about political protection in crypto?

Laura Shin

18,535 просмотров • 1 год назад

btw, for anyone that needs to hear it the 3D printed 6+1DoF arm files are open source now. you can literally print this stiff beast on your bambu p1s, zero milling involved!! super stiff and smooth for precise teleoperation and deploying policies.
0:39

btw, for anyone that needs to hear it the 3D printed 6+1DoF arm files are open source now. you can literally print this stiff beast on your bambu p1s, zero milling involved!! super stiff and smooth for precise teleoperation and deploying policies.

Roberto

124,421 просмотров • 6 месяцев назад

ASTORINO is a 6-axis robot built for education not industry -3D printed -easy to repair -programmable in AS-language designed so students can learn by breaking it without consequence most educational robots are -expensive -fragile -dumbeddown toys this one assumes students will make mistakes and builds around that reality Kawasaki Robotics
1:53

ASTORINO is a 6-axis robot built for education not industry -3D printed -easy to repair -programmable in AS-language designed so students can learn by breaking it without consequence most educational robots are -expensive -fragile -dumbeddown toys this one assumes students will make mistakes and builds around that reality Kawasaki Robotics

Saint Nomad

22,154 просмотров • 5 месяцев назад

A miniature 6-axis robotic arm prototype was tested to evaluate its 6-DOF (Degrees of Freedom) performance. Colored markers attached to the end effector represent the X, Y, and Z axes of its reference frame, providing a clear visualization of the motion. The arm demonstrated relatively smooth movement for an early-stage prototype, though some wobbling in the reference frame was observed during rotations. These variations are likely due to part tolerances and assembly imperfections. Video credits: Oleksandr Stepanenko #robot #robotics #engineering #automation #robotarm #roboticarm #actuator
0:43

A miniature 6-axis robotic arm prototype was tested to evaluate its 6-DOF (Degrees of Freedom) performance. Colored markers attached to the end effector represent the X, Y, and Z axes of its reference frame, providing a clear visualization of the motion. The arm demonstrated relatively smooth movement for an early-stage prototype, though some wobbling in the reference frame was observed during rotations. These variations are likely due to part tolerances and assembly imperfections. Video credits: Oleksandr Stepanenko #robot #robotics #engineering #automation #robotarm #roboticarm #actuator

Wevolver

25,612 просмотров • 1 год назад

Picking up laundry with a 3D printed robot arm and LeRobot. It operates using SO-ARM101 arm mounted on a mobile base, relying on just a wrist and base camera. The base is controlled with an Xbox controller by a human operator. The arm is fully autonomous thanks to the ACT model. The robot can generalize to previously unseen environments. The technical stack: - Model: Action Chunking Transformer (ACT) with Temporal Ensemble - Data: Learned via teleoperation including negative examples and failure recoveries - Framework: Built and trained locally using LeRobot on a single consumer GPU in 3.5h This is a perfect example that real-world robotics isn't about perfect lab conditions - it's about messy living rooms, confusing shadows, and learning to recover from mistakes. And with open tools, anyone can tackle these edge cases right from their desk.
1:55

Picking up laundry with a 3D printed robot arm and LeRobot. It operates using SO-ARM101 arm mounted on a mobile base, relying on just a wrist and base camera. The base is controlled with an Xbox controller by a human operator. The arm is fully autonomous thanks to the ACT model. The robot can generalize to previously unseen environments. The technical stack: - Model: Action Chunking Transformer (ACT) with Temporal Ensemble - Data: Learned via teleoperation including negative examples and failure recoveries - Framework: Built and trained locally using LeRobot on a single consumer GPU in 3.5h This is a perfect example that real-world robotics isn't about perfect lab conditions - it's about messy living rooms, confusing shadows, and learning to recover from mistakes. And with open tools, anyone can tackle these edge cases right from their desk.

LeRobot

69,053 просмотров • 1 месяц назад

Introducing my very second head, Cinna 2.0 for #fursuit Friday! Shes built with a 3d printed base, fully padded and fitted to my head. She's fully lined, has different Velcro eyelids and has inserts for LEDs in the eyes!
0:38

Introducing my very second head, Cinna 2.0 for #fursuit Friday! Shes built with a 3d printed base, fully padded and fitted to my head. She's fully lined, has different Velcro eyelids and has inserts for LEDs in the eyes!

Strawberry Short Mutt🍓🍰

54,998 просмотров • 1 год назад

Hidden genius from the masses! A talented Chinese DIY maker has 3D-printed an incredible all-terrain robot that conquers land, water, and air with ease. Netizens in China are buzzing about its massive military potential. It could be the future of tech.
1:37

Hidden genius from the masses! A talented Chinese DIY maker has 3D-printed an incredible all-terrain robot that conquers land, water, and air with ease. Netizens in China are buzzing about its massive military potential. It could be the future of tech.

Li Zexin 李泽欣

1,051,297 просмотров • 1 год назад

Google's Genie 3 is capable of generating full 3D worlds. But not only that, they are FULLY INTERACTIVE. Here are the most incredible demos they shared:
0:56

Google's Genie 3 is capable of generating full 3D worlds. But not only that, they are FULLY INTERACTIVE. Here are the most incredible demos they shared:

Matthew Berman

893,940 просмотров • 1 год назад

I used GPT-6 Astra to create a 3D website that pulls apart the humanoid anatomy into 1,168 CAD components! zoom into actuators, electronics, CNC structure and all inspired by ashe and based on Menlo Research 's Asimov 1
0:36

I used GPT-6 Astra to create a 3D website that pulls apart the humanoid anatomy into 1,168 CAD components! zoom into actuators, electronics, CNC structure and all inspired by ashe and based on Menlo Research 's Asimov 1

Michelle Sun

26,552 просмотров • 9 дней назад

LSU transfer QB Landen Clark from Elon has the sneakiest arm strength I've ever seen You expect someone built like LaNorris Sellers to have a cannon, but Clark is 6-foot and under 200 pounds with a top-3 arm in college football
0:39

LSU transfer QB Landen Clark from Elon has the sneakiest arm strength I've ever seen You expect someone built like LaNorris Sellers to have a cannon, but Clark is 6-foot and under 200 pounds with a top-3 arm in college football

Mike Renner

65,862 просмотров • 15 дней назад

Astra’s spatial understanding is mindblowing to watch. three uncalibrated cameras. no intrinsics, no extrinsics. it nudged the robot arm, learned how each camera sees motion, worked out the brush tip’s 3d offset, and verified it at new angles -- all from one prompt and a tiny follow up. final result was under 0.2 mm of camera-measured tip movement!
1:12

Astra’s spatial understanding is mindblowing to watch. three uncalibrated cameras. no intrinsics, no extrinsics. it nudged the robot arm, learned how each camera sees motion, worked out the brush tip’s 3d offset, and verified it at new angles -- all from one prompt and a tiny follow up. final result was under 0.2 mm of camera-measured tip movement!

nil

19,403 просмотров • 9 дней назад

Will Cogley designed a highly bionic robotic head for a humanoid robot called the Stewart Platform Neck, demonstrating the ultimate pursuit of fine facial expressions and head posture control, which is inspiring for more realistic human-computer interaction in the future. The Stewart Platform consists of six linear actuators connecting two plates to achieve six degrees of freedom, simulating the complex structure of human neck muscles. It is controlled by Python programming and inverse kinematics algorithms, and supplemented by a 3D printed flexible spine to provide support and flexibility.
0:20

Will Cogley designed a highly bionic robotic head for a humanoid robot called the Stewart Platform Neck, demonstrating the ultimate pursuit of fine facial expressions and head posture control, which is inspiring for more realistic human-computer interaction in the future. The Stewart Platform consists of six linear actuators connecting two plates to achieve six degrees of freedom, simulating the complex structure of human neck muscles. It is controlled by Python programming and inverse kinematics algorithms, and supplemented by a 3D printed flexible spine to provide support and flexibility.

CyberRobo

32,437 просмотров • 1 год назад