Загрузка видео...

Не удалось загрузить видео

Возникла проблема при загрузке этого видео. Это может быть связано с временными проблемами сети или видео может быть недоступно.

На главную

XPeng has launched an automated production line designed to mass-produce its general-purpose humanoid robots, with over 80% of core processes automated. The company plans to start full-scale production by the end of 2026, with deliveries expected in 2027. As its IRON humanoid robot came off the line, it was... show more

Space and Technology

38,148 subscribers

17,785 просмотров • 22 дней назад •via X (Twitter)

Anya Rossi• Live Now

Private livecam show

Комментарии: 8

Фото профиля Marcus

Marcus21 дней назад

80% means there is still room for improvement! 🇨🇳💪

Фото профиля Gerrit van Veen

Gerrit van Veen21 дней назад

It never ceases to amaze how robots are evolving

Фото профиля Frame

Frame21 дней назад

80% automated and they still put it through orientation

Фото профиля ZONE 30

ZONE 3022 дней назад

J'ai hâte de ken un robot chinois ! 🤣

Фото профиля Mirrorworld AI

Mirrorworld AI22 дней назад

XPeng moving to 80% automated production for humanoids tells us the hardware bottleneck is cracking. For us this means simulation load shifts. From proving single-unit control to validating line-rate consistency across thousands of synthetic IRON units before the real floor spins up. 🤖⚙️

Фото профиля Patriota Volta

Patriota Volta22 дней назад

Automating the line that builds the humanoids. Full circle factory energy.

Фото профиля Velkorti

Velkorti22 дней назад

80% automated means the remaining 20% is the job nobody wants to describe

Фото профиля Michael Chao e/acc🇸🇬🇺🇲🇮🇱

Michael Chao e/acc🇸🇬🇺🇲🇮🇱22 дней назад

Basically it does not have ai! It is remote controlled or programmed! Nothing about it is new

Похожие видео

We made it! XPENG launches the world’s first automated production line for advanced general‑purpose humanoid robots. The world’s first advanced general‑purpose humanoid robot has completed automated production and autonomously walks off the line. $XPEV

We made it! XPENG launches the world’s first automated production line for advanced general‑purpose humanoid robots. The world’s first advanced general‑purpose humanoid robot has completed automated production and autonomously walks off the line. $XPEV

XPENG

2,247,210 просмотров • 29 дней назад

This is the first IRON robot coming off XPENG Robotics’ new production line. XPENG just started building humanoid robots like cars. And yes—it walked off by itself. The line automates 80%+ of core processes and uses automotive-grade quality control. Mass production is set for year-end, with stores and campuses first. China and overseas deliveries follow in 2027. $900M+ raised at a $6.3B+ valuation just two weeks ago. Now the production line is running. XPENG’s humanoid push suddenly looks a lot less like a side project.

This is the first IRON robot coming off XPENG Robotics’ new production line. XPENG just started building humanoid robots like cars. And yes—it walked off by itself. The line automates 80%+ of core processes and uses automotive-grade quality control. Mass production is set for year-end, with stores and campuses first. China and overseas deliveries follow in 2027. $900M+ raised at a $6.3B+ valuation just two weeks ago. Now the production line is running. XPENG’s humanoid push suddenly looks a lot less like a side project.

RoboHub🤖

1,002,402 просмотров • 29 дней назад

Chinese EV maker XPeng unveiled its humanoid robot Iron last year. The robot stands 178 cm tall, weighs about 70 kg, and has over 62 active joints for flexible movement. It features a bionic body with a flexible spine and synthetic muscles, and the company plans to start mass production in 2026.

Chinese EV maker XPeng unveiled its humanoid robot Iron last year. The robot stands 178 cm tall, weighs about 70 kg, and has over 62 active joints for flexible movement. It features a bionic body with a flexible spine and synthetic muscles, and the company plans to start mass production in 2026.

Space and Technology

20,198 просмотров • 5 месяцев назад

The first humanoid robot to walk itself off a production line XPENG’s IRON just came off its first mass-production line. And its first stop?-> An XPENG 4S store. it's born to work. Greeting customers. Guiding people around. Moving things. Taking on the repetitive tasks that make up everyday work. IRON is a highly human-like humanoid:full-body flexible skin, lattice bionic muscles, a human-like spine, with natural-language interaction and, apparently, the first humanoid robot proven to be non-human. So,IRON will start withstart with the jobs that are dangerous, repetitive, or simply no one wants to do, then move into more parts of everyday life. But getting a humanoid into the real world requires more than building the robot itself. XPENG had to build its humanoid production line from scratch. Automakers have decades of manufacturing experience to learn from. Humanoid robotics has no comparable playbook. XPENG’s 110,000㎡ humanoid robot production base in Guangzhou is built to support a target of 1,000 IRON units per month by year-end, with capacity ready to scale as market demand grows. From building the factory from zero to putting the robots to work in 4S stores. Soon, we’ll see the IRON fleet enter the real world.

The first humanoid robot to walk itself off a production line XPENG’s IRON just came off its first mass-production line. And its first stop?-> An XPENG 4S store. it's born to work. Greeting customers. Guiding people around. Moving things. Taking on the repetitive tasks that make up everyday work. IRON is a highly human-like humanoid:full-body flexible skin, lattice bionic muscles, a human-like spine, with natural-language interaction and, apparently, the first humanoid robot proven to be non-human. So,IRON will start withstart with the jobs that are dangerous, repetitive, or simply no one wants to do, then move into more parts of everyday life. But getting a humanoid into the real world requires more than building the robot itself. XPENG had to build its humanoid production line from scratch. Automakers have decades of manufacturing experience to learn from. Humanoid robotics has no comparable playbook. XPENG’s 110,000㎡ humanoid robot production base in Guangzhou is built to support a target of 1,000 IRON units per month by year-end, with capacity ready to scale as market demand grows. From building the factory from zero to putting the robots to work in 4S stores. Soon, we’ll see the IRON fleet enter the real world.

CyberRobo

15,185 просмотров • 29 дней назад

The First Manufacturer to Mass-Produce 5,000 Humanoid Robots AgiBOT rolled off its 5,000th humanoid robot (a Lingxi X2) today, marking a milestone for both the company and the humanoid robot industry as a whole: a significant step towards large-scale deployment in the real world. AgiBOT co-founder and CTO Peng Zhihui stated in a live said that these 5,000 units include the Yuanzheng series (1742), the Lingxi series (1846), and the Genie series (1412). These humanoid robots will be deployed in various settings, including scientific research, entertainment, shopping malls, factories, and warehouses. This also signals that AgiBOT has the capacity for mass production and is ready to meet future surges in customer demand. Its production partner, LingyiTech, was the main force behind the assembly of AgiBOT's 5,000 humanoid robots this year, and they are planning an automated production line with an annual capacity of 500,000 units. Next year will be a milestone year for humanoid robots, reaching 10,000 units annually. Including Tesla, 1X, UBTECH…

The First Manufacturer to Mass-Produce 5,000 Humanoid Robots AgiBOT rolled off its 5,000th humanoid robot (a Lingxi X2) today, marking a milestone for both the company and the humanoid robot industry as a whole: a significant step towards large-scale deployment in the real world. AgiBOT co-founder and CTO Peng Zhihui stated in a live said that these 5,000 units include the Yuanzheng series (1742), the Lingxi series (1846), and the Genie series (1412). These humanoid robots will be deployed in various settings, including scientific research, entertainment, shopping malls, factories, and warehouses. This also signals that AgiBOT has the capacity for mass production and is ready to meet future surges in customer demand. Its production partner, LingyiTech, was the main force behind the assembly of AgiBOT's 5,000 humanoid robots this year, and they are planning an automated production line with an annual capacity of 500,000 units. Next year will be a milestone year for humanoid robots, reaching 10,000 units annually. Including Tesla, 1X, UBTECH…

CyberRobo

47,095 просмотров • 10 месяцев назад

Today, we launched the world’s first automated production line for advanced general‑purpose humanoid robots, using robots to mass‑produce robots, autonomously. This was uncharted territory, and we solved it from scratch. The commissioning of our production line means humanoid robots are now ready to scale up and step into the real world. What touched my heartstrings most was watching our very first advanced general‑purpose humanoid robot complete assembly and walk off the line on its own. To me, this is not just about a smarter tool or a commodity. I hope it gains true generalization ability to take on dangerous, repetitive, or undesirable tasks, and ultimately make life better. Perhaps one day, robots may become our companions, friends, or part of family. Grateful to every colleague on this momumental mission. And a warm welcome to IRON!

Today, we launched the world’s first automated production line for advanced general‑purpose humanoid robots, using robots to mass‑produce robots, autonomously. This was uncharted territory, and we solved it from scratch. The commissioning of our production line means humanoid robots are now ready to scale up and step into the real world. What touched my heartstrings most was watching our very first advanced general‑purpose humanoid robot complete assembly and walk off the line on its own. To me, this is not just about a smarter tool or a commodity. I hope it gains true generalization ability to take on dangerous, repetitive, or undesirable tasks, and ultimately make life better. Perhaps one day, robots may become our companions, friends, or part of family. Grateful to every colleague on this momumental mission. And a warm welcome to IRON!

Xiaopeng He

3,548,613 просмотров • 29 дней назад

IRON walks like a human. XPENG has just held a supplier conference, bringing together major suppliers across actuators, dexterous hands, sensors, AI chips and other key components. It has completed supplier audits and finalized key component suppliers. Around 85% of its suppliers overlap with XPENG’s automotive supply chain, and production scheduling is now underway. IRON’s production line started operating on September 8,Guangzhou, with more than 80% of core processes automated.

IRON walks like a human. XPENG has just held a supplier conference, bringing together major suppliers across actuators, dexterous hands, sensors, AI chips and other key components. It has completed supplier audits and finalized key component suppliers. Around 85% of its suppliers overlap with XPENG’s automotive supply chain, and production scheduling is now underway. IRON’s production line started operating on September 8,Guangzhou, with more than 80% of core processes automated.

CyberRobo

43,128 просмотров • 12 дней назад

Humanoid robots are starting to build humanoid robots. UBTECH just put a 14,000㎡ humanoid robot factory into operation in Liuzhou, China, with a designed takt time of one humanoid every 10 minutes and planned annual capacity in the tens of thousands. What’s interesting is that humanoid robots are already part of the production process. Cruzr Y1 and Y2 handle depalletizing, palletizing, material feeding and transport, using 3D vision to adapt to shifted boxes and changing pallet patterns. On the assembly side, Walker S2 and Cruzr are produced on the same line alongside cobots, autonomous logistics vehicles and assistive manipulators. The factory also has a 65㎡ automated warehouse capable of storing 112 humanoids, with AGVs, industrial robots and stacker cranes coordinated as one system. Before production, the factory was modeled 1:1 in Siemens Plant Simulation, covering workstations, racks and AGVs. Each robot gets its own SN, with components, batches, assembly parameters and inspection data tracked all the way to delivery. Humanoid robots are now entering automated manufacturing at the 10,000-unit scale. The next milestone may be when they can take part in enough of the assembly, testing and production process to truly build robots themselves.

Humanoid robots are starting to build humanoid robots. UBTECH just put a 14,000㎡ humanoid robot factory into operation in Liuzhou, China, with a designed takt time of one humanoid every 10 minutes and planned annual capacity in the tens of thousands. What’s interesting is that humanoid robots are already part of the production process. Cruzr Y1 and Y2 handle depalletizing, palletizing, material feeding and transport, using 3D vision to adapt to shifted boxes and changing pallet patterns. On the assembly side, Walker S2 and Cruzr are produced on the same line alongside cobots, autonomous logistics vehicles and assistive manipulators. The factory also has a 65㎡ automated warehouse capable of storing 112 humanoids, with AGVs, industrial robots and stacker cranes coordinated as one system. Before production, the factory was modeled 1:1 in Siemens Plant Simulation, covering workstations, racks and AGVs. Each robot gets its own SN, with components, batches, assembly parameters and inspection data tracked all the way to delivery. Humanoid robots are now entering automated manufacturing at the 10,000-unit scale. The next milestone may be when they can take part in enough of the assembly, testing and production process to truly build robots themselves.

CyberRobo

17,883 просмотров • 24 дней назад

🤖 China has launched a factory where robots build robots UBTECH Robotics has opened a “smart” factory in Liuzhou for the mass production of humanoid robots. Robots are already being used on the production line to help assemble other robots. The facility is designed to produce more than 10,000 humanoids a year, with a target rate of roughly one finished robot every 10 minutes. For now, it all looks like industrial automation. Skynet, please take a number and wait your turn.

🤖 China has launched a factory where robots build robots UBTECH Robotics has opened a “smart” factory in Liuzhou for the mass production of humanoid robots. Robots are already being used on the production line to help assemble other robots. The facility is designed to produce more than 10,000 humanoids a year, with a target rate of roughly one finished robot every 10 minutes. For now, it all looks like industrial automation. Skynet, please take a number and wait your turn.

NEXTA

45,616 просмотров • 20 дней назад

✈️UBTECH Walker S2 humanoid robot will be deployed to aircraft manufacturing plants. UBTECH and European aerospace giant Airbus have signed a service agreement for humanoid robots. Airbus has purchased UBTECH's latest industrial humanoid robot, the Walker S2, for use in its manufacturing plants. Following the purchase of the Walker S2 by American semiconductor giant Texas Instruments, UBTECH is expanding the application of this industrial humanoid robot, which can autonomously change its battery, to aerospace manufacturing, automotive manufacturing, 3C electronics manufacturing, smart logistics, and semiconductor manufacturing. UBTECH secured orders exceeding 1.4 billion RMB in 2025 and delivered 500 units. The 1000th Walker S2 rolled off the production line last December, and the company plans to mass-produce 10,000 units this year, accelerating the commercial application of humanoid robots.

✈️UBTECH Walker S2 humanoid robot will be deployed to aircraft manufacturing plants. UBTECH and European aerospace giant Airbus have signed a service agreement for humanoid robots. Airbus has purchased UBTECH's latest industrial humanoid robot, the Walker S2, for use in its manufacturing plants. Following the purchase of the Walker S2 by American semiconductor giant Texas Instruments, UBTECH is expanding the application of this industrial humanoid robot, which can autonomously change its battery, to aerospace manufacturing, automotive manufacturing, 3C electronics manufacturing, smart logistics, and semiconductor manufacturing. UBTECH secured orders exceeding 1.4 billion RMB in 2025 and delivered 500 units. The 1000th Walker S2 rolled off the production line last December, and the company plans to mass-produce 10,000 units this year, accelerating the commercial application of humanoid robots.

CyberRobo

47,542 просмотров • 8 месяцев назад

Humanoid Robots on a Real Production Line: AGIBOT Livestream From June 23–28, AGIBOT will host a livestream from a tablet mass-production line, showcasing humanoid robots operating across a full quality-inspection section in a real factory environment alongside human operators. Over six days, viewers will get a live look at real production workflows, human-robot collaboration, multi-robot coordination, and long-duration operations under actual industrial conditions. As humanoid robotics moves from demonstrations to real-world deployment, the livestream offers a rare opportunity to see how humanoid robots perform on an active production line. 📅 June 23–28, 2026 📍 Longcheer Technology, Nanchang Factory ▶ Watch live on AGIBOT Official X（ Youtube ( Channel.

Humanoid Robots on a Real Production Line: AGIBOT Livestream From June 23–28, AGIBOT will host a livestream from a tablet mass-production line, showcasing humanoid robots operating across a full quality-inspection section in a real factory environment alongside human operators. Over six days, viewers will get a live look at real production workflows, human-robot collaboration, multi-robot coordination, and long-duration operations under actual industrial conditions. As humanoid robotics moves from demonstrations to real-world deployment, the livestream offers a rare opportunity to see how humanoid robots perform on an active production line. 📅 June 23–28, 2026 📍 Longcheer Technology, Nanchang Factory ▶ Watch live on AGIBOT Official X（ Youtube ( Channel.

AGIBOT

84,194 просмотров • 3 месяцев назад

1X Technologies has started mass production of its NEO humanoid robot at a factory in California. The factory can build up to 10,000 robots each year and aims to exceed 100,000 units annually by 2027. Some NEO robots are already working in the factory, helping with tasks like moving parts and handling logistics.

1X Technologies has started mass production of its NEO humanoid robot at a factory in California. The factory can build up to 10,000 robots each year and aims to exceed 100,000 units annually by 2027. Some NEO robots are already working in the factory, helping with tasks like moving parts and handling logistics.

Space and Technology

95,742 просмотров • 4 месяцев назад

China’s PrimeBOT has formally launched its Q1 and T1 personal robots for sale, both starting at RMB19,999 (~$2.8k) T1 is the stranger of the two, switching between an upright wheeled "humanoid" form and a quadruped configuration for indoor and outdoor use Q1 is an 88 cm personal humanoid focused more on interaction, programmability and customization Shipments scheduled to begin October 1st in order sequence PrimeBOT also says its production line is running at a 2.5 minute takt time It has partnered with Lens Technology’s robotics unit on an initial 10,000 unit scale production line covering precision parts, joint modules and final assembly

China’s PrimeBOT has formally launched its Q1 and T1 personal robots for sale, both starting at RMB19,999 (~$2.8k) T1 is the stranger of the two, switching between an upright wheeled "humanoid" form and a quadruped configuration for indoor and outdoor use Q1 is an 88 cm personal humanoid focused more on interaction, programmability and customization Shipments scheduled to begin October 1st in order sequence PrimeBOT also says its production line is running at a 2.5 minute takt time It has partnered with Lens Technology’s robotics unit on an initial 10,000 unit scale production line covering precision parts, joint modules and final assembly

𝐀𝐆

28,649 просмотров • 14 дней назад

⚡️ JUST IN: Korean robotics startup WIRobotics raised ~$63 million in Series B funding and plans to launch its ALLEX humanoid robot in Q4, targeting 300+ units of production capacity by the end of 2027.

⚡️ JUST IN: Korean robotics startup WIRobotics raised ~$63 million in Series B funding and plans to launch its ALLEX humanoid robot in Q4, targeting 300+ units of production capacity by the end of 2027.

Cointelegraph

31,794 просмотров • 4 месяцев назад