Загрузка видео...

Не удалось загрузить видео

На главную

A cool cable robot from Germany! 🧶 CARGOLin, the newest cable-driven system from the ISW University of Stuttgart was showcased at SPS for the first time. The control stack runs on TwinCAT 3 from Beckhoff Automation, computing kinematics in under 200 microseconds, enabling hybrid control at high speed. Eight...

lukas_m_ziegler's profile picture

Lukas Ziegler

19,561 subscribers

65,190 просмотров • 8 месяцев назад •via X (Twitter)

LIVE

Anya Rossi• Live Now

Private livecam show

Комментарии: 0

Нет доступных комментариев

Здесь появятся комментарии из оригинального поста

Похожие видео

Robots from Humanoid passed real factory test at Siemens! 😮‍💨 Humanoid from the UK just completed a successful proof of concept with Siemens, deploying their HMND 01 wheeled humanoid robot in a real working factory. The task was simple but important: pick totes from a storage stack, transport them to a conveyor, and place them at the pickup point for human operators. Repeat until the stack is empty. The robot achieved 60 tote moves per hour, handled two different tote sizes, ran autonomously for more than 30 minutes at a time, stayed operational for over eight hours, and maintained over 90% success rate on pick and place tasks. This matters because it's not a demo video. It's a real deployment in Siemens' Electronics Factory in Erlangen, handling actual production work, measured against real operational metrics. The test ran in two phases. First, Humanoid built a physical twin in-house to test and optimize the system. Then they deployed on-site at Siemens for two weeks, where the robot operated in the real production environment. We can see a wheeled humanoid robot in action! So, now the ultimate question: wheels or legs? 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:26

Robots from Humanoid passed real factory test at Siemens! 😮‍💨 Humanoid from the UK just completed a successful proof of concept with Siemens, deploying their HMND 01 wheeled humanoid robot in a real working factory. The task was simple but important: pick totes from a storage stack, transport them to a conveyor, and place them at the pickup point for human operators. Repeat until the stack is empty. The robot achieved 60 tote moves per hour, handled two different tote sizes, ran autonomously for more than 30 minutes at a time, stayed operational for over eight hours, and maintained over 90% success rate on pick and place tasks. This matters because it's not a demo video. It's a real deployment in Siemens' Electronics Factory in Erlangen, handling actual production work, measured against real operational metrics. The test ran in two phases. First, Humanoid built a physical twin in-house to test and optimize the system. Then they deployed on-site at Siemens for two weeks, where the robot operated in the real production environment. We can see a wheeled humanoid robot in action! So, now the ultimate question: wheels or legs? 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

21,993 просмотров • 5 месяцев назад

The robot is used to inspect the walls of ships. 🚢 The Magnet Crawler introduced by the University of Bremen is a lightweight and compact climbing robot for magnetic surfaces. The robot has two magnetic wheels driven by geared motors and an elastic tail to improve stability. In the front part of the robot, there is a miniature wireless camera. The robot is remotely teleoperated & the video signal from the camera is displayed to the operator on a portable screen. Let's wait and perhaps the robot will become more autonomous over time. Big fan of robots that make the world a safer place for humans. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:51

The robot is used to inspect the walls of ships. 🚢 The Magnet Crawler introduced by the University of Bremen is a lightweight and compact climbing robot for magnetic surfaces. The robot has two magnetic wheels driven by geared motors and an elastic tail to improve stability. In the front part of the robot, there is a miniature wireless camera. The robot is remotely teleoperated & the video signal from the camera is displayed to the operator on a portable screen. Let's wait and perhaps the robot will become more autonomous over time. Big fan of robots that make the world a safer place for humans. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

21,587 просмотров • 1 месяц назад

A versatile robot helping out airports! 🛩️ Meet a two-wheeled robot from Fraunhofer IML! 🦿 This balancing robot with gripping arms successfully completed its initial practical tests at the cargo terminal of Munich Airport a while ago. It transported goods, supported loading and unloading, and assisted with physically demanding logistics tasks. This robot can carry loads of up to 100 kg and reach speeds of around 60 km/h. That’s far beyond what most AMRs can handle, yet it still has arms and a form of mobility that lets it work in spaces designed for people. P.S. What other applications would you use this robot for?! 🦾 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:49

A versatile robot helping out airports! 🛩️ Meet a two-wheeled robot from Fraunhofer IML! 🦿 This balancing robot with gripping arms successfully completed its initial practical tests at the cargo terminal of Munich Airport a while ago. It transported goods, supported loading and unloading, and assisted with physically demanding logistics tasks. This robot can carry loads of up to 100 kg and reach speeds of around 60 km/h. That’s far beyond what most AMRs can handle, yet it still has arms and a form of mobility that lets it work in spaces designed for people. P.S. What other applications would you use this robot for?! 🦾 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

29,688 просмотров • 6 месяцев назад

Unloading trucks with robots! 📦 Bastian Solutions has developed a mobile robot system that automates high-volume, floor-level unloading of trailers. Let's have a closer look at how it actually works! The robot seamlessly drives itself in and out of trailers and docks without any fixed infrastructure. This system picks up cases via an extendable conveyor, lifts them using a retractable mast, and accurately places them inside the trailer using a dedicated gripper. In the video you can see the reversed process, unloading of a truck. 🚛 It's guided by LiDAR-based navigation and an omnidirectional base, enabling fast, precise, and infrastructure-free operation. Integrates smoothly with existing systems like conveyors, scanners, sorters, and depalletizers. Every time I see a robot loading and unloading a truck, I'm like: we are getting there :) ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:23

Unloading trucks with robots! 📦 Bastian Solutions has developed a mobile robot system that automates high-volume, floor-level unloading of trailers. Let's have a closer look at how it actually works! The robot seamlessly drives itself in and out of trailers and docks without any fixed infrastructure. This system picks up cases via an extendable conveyor, lifts them using a retractable mast, and accurately places them inside the trailer using a dedicated gripper. In the video you can see the reversed process, unloading of a truck. 🚛 It's guided by LiDAR-based navigation and an omnidirectional base, enabling fast, precise, and infrastructure-free operation. Integrates smoothly with existing systems like conveyors, scanners, sorters, and depalletizers. Every time I see a robot loading and unloading a truck, I'm like: we are getting there :) ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

64,540 просмотров • 19 дней назад

Another win for open-source robotics! 🔥 Hugging Face just released a fully open-source humanoid robot, and you can build one for $2,500. I'm a huge advocate of open-source in robotics space. Why? Robotics is too hard to solve alone. So lowering the entry point is crucial. Also, ROS proved open ecosystems create lasting industry standards. So let's have a look at the new member of humanoids family! LeRobot Humanoid is a 3D-printed, bipedal humanoid platform designed for real robot learning experiments. It's a complete and, buildable robot Anddddd yes, it's a full stack release: → Hardware files, bill of materials and full assembly documentation → Simulation assets and training environments → Runtime tools for calibration and real-world control → Sim-to-real identification pipeline When a part breaks, reprint it. When a design choice doesn't work, modify it and test again. The whole point is fast iteration on real hardware, not treating the robot as a fixed artefact. The timing is not a coincidence. As foundation models for robotics mature, the field desperately needs open physical platforms to train, validate and deploy them on. clem 🤗 LET'S GO!!! Build it here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:20

Another win for open-source robotics! 🔥 Hugging Face just released a fully open-source humanoid robot, and you can build one for $2,500. I'm a huge advocate of open-source in robotics space. Why? Robotics is too hard to solve alone. So lowering the entry point is crucial. Also, ROS proved open ecosystems create lasting industry standards. So let's have a look at the new member of humanoids family! LeRobot Humanoid is a 3D-printed, bipedal humanoid platform designed for real robot learning experiments. It's a complete and, buildable robot Anddddd yes, it's a full stack release: → Hardware files, bill of materials and full assembly documentation → Simulation assets and training environments → Runtime tools for calibration and real-world control → Sim-to-real identification pipeline When a part breaks, reprint it. When a design choice doesn't work, modify it and test again. The whole point is fast iteration on real hardware, not treating the robot as a fixed artefact. The timing is not a coincidence. As foundation models for robotics mature, the field desperately needs open physical platforms to train, validate and deploy them on. clem 🤗 LET'S GO!!! Build it here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

20,361 просмотров • 2 месяцев назад

A 40-year-old patent has finally been brought to life. That's the Y-zipper. A 3D-printed three-sided fastener that transitions any object from flexible to rigid and back again. The robotics application is the one that caught my attention. A quadruped robot that adjusts its leg stiffness depending on terrain, switching between rigid and flexible in real time without additional motors or complex mechanical systems. But this goes way beyond robotics. A wrist cast that loosens during the day and stiffens at night. A tent that pops into shape in 90 seconds instead of six minutes. The idea sat in a patent filing for four decades. It took 3D printing to finally make it real. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
3:58

A 40-year-old patent has finally been brought to life. That's the Y-zipper. A 3D-printed three-sided fastener that transitions any object from flexible to rigid and back again. The robotics application is the one that caught my attention. A quadruped robot that adjusts its leg stiffness depending on terrain, switching between rigid and flexible in real time without additional motors or complex mechanical systems. But this goes way beyond robotics. A wrist cast that loosens during the day and stiffens at night. A tent that pops into shape in 90 seconds instead of six minutes. The idea sat in a patent filing for four decades. It took 3D printing to finally make it real. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

1,803,349 просмотров • 2 месяцев назад

What happens when mobile manipulators go on a grid❓ This week Brightpick announced Gridpicker, its new robotic system for high-throughput applications. Combining AI-powered mobile manipulation with a high-density grid design, Gridpicker achieves up to 2x the throughput of shuttle systems at 40% lower cost and using 5x less labor. Most fascinating: The cost of Gridpicker DECREASES as automation increases 🤯 Traditional systems separate storage and picking. If you want more robotic picking, you add expensive robotic cells, more infrastructure, and more complexity. Gridpicker was designed differently: Each robot both retrieves items and picks them. The greater the share of robotically pickable items: The more productive each robot becomes The fewer robots are needed The lower the cost per order That means progress in AI and VLAs directly translate into better system economics over time. Hats off to Jan Zizka that! 👏 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:30

What happens when mobile manipulators go on a grid❓ This week Brightpick announced Gridpicker, its new robotic system for high-throughput applications. Combining AI-powered mobile manipulation with a high-density grid design, Gridpicker achieves up to 2x the throughput of shuttle systems at 40% lower cost and using 5x less labor. Most fascinating: The cost of Gridpicker DECREASES as automation increases 🤯 Traditional systems separate storage and picking. If you want more robotic picking, you add expensive robotic cells, more infrastructure, and more complexity. Gridpicker was designed differently: Each robot both retrieves items and picks them. The greater the share of robotically pickable items: The more productive each robot becomes The fewer robots are needed The lower the cost per order That means progress in AI and VLAs directly translate into better system economics over time. Hats off to Jan Zizka that! 👏 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

29,457 просмотров • 4 месяцев назад

Magnetic levitation for surgical robots! 🧲 A research team working on minimally invasive surgery just introduced a remote magnetic levitation to move things inside our bodies. Their main goal is to control guidewires and catheters inside the body using magnetic fields. But levitation is unstable and extreme, it forces them to solve fundamental control problems they can't avoid. They have to handle strong magnetic field nonlinearities, develop real-time invertible models, and create control methods that work on any eMNS (electroMagnetic Navigation System) and any object. The real challenge is the position and orientation feedback. You can control a magnet outside the body, but once a catheter or drug-delivery robot is inside a patient, you can't see it. There's no vision, but just magnetic fields and current measurements. That's huge news coming out of ETH Zurich! Here's the paper: Mentioned all authors on Li, but coulnd't find them here! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:20

Magnetic levitation for surgical robots! 🧲 A research team working on minimally invasive surgery just introduced a remote magnetic levitation to move things inside our bodies. Their main goal is to control guidewires and catheters inside the body using magnetic fields. But levitation is unstable and extreme, it forces them to solve fundamental control problems they can't avoid. They have to handle strong magnetic field nonlinearities, develop real-time invertible models, and create control methods that work on any eMNS (electroMagnetic Navigation System) and any object. The real challenge is the position and orientation feedback. You can control a magnet outside the body, but once a catheter or drug-delivery robot is inside a patient, you can't see it. There's no vision, but just magnetic fields and current measurements. That's huge news coming out of ETH Zurich! Here's the paper: Mentioned all authors on Li, but coulnd't find them here! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

120,803 просмотров • 1 месяц назад

Robots might learn better from video than from language! 📼 Most Vision-Language-Action (VLA) models learn what to do from text, but still struggle with how things move in the real world. That makes them data-hungry and slow to train. mimic video takes a different route. Instead of grounding robot control in text, it grounds it in video, using large pre-trained video models that already capture physical motion and dynamics. The idea is straightforward: let the video model handle “what will happen next,” and let a smaller control model focus only on turning that visual plan into robot actions. The result is big gains in practice. Robots trained this way need 10× less data, converge twice as fast, and perform better on both simulated benchmarks and real bimanual manipulation tasks. If robots can “imagine” motion using video, control becomes a much simpler problem. Shoutout to Jonas Pai, Liam Achenbach, Oier Mees, Elvis Nava and the rest of the team! Here's the project page: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:47

Robots might learn better from video than from language! 📼 Most Vision-Language-Action (VLA) models learn what to do from text, but still struggle with how things move in the real world. That makes them data-hungry and slow to train. mimic video takes a different route. Instead of grounding robot control in text, it grounds it in video, using large pre-trained video models that already capture physical motion and dynamics. The idea is straightforward: let the video model handle “what will happen next,” and let a smaller control model focus only on turning that visual plan into robot actions. The result is big gains in practice. Robots trained this way need 10× less data, converge twice as fast, and perform better on both simulated benchmarks and real bimanual manipulation tasks. If robots can “imagine” motion using video, control becomes a much simpler problem. Shoutout to Jonas Pai, Liam Achenbach, Oier Mees, Elvis Nava and the rest of the team! Here's the project page: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

49,920 просмотров • 7 месяцев назад

🚨 Apple joins the robotics race! Researchers from Carnegie Mellon University and Apple have developed a robot collision avoidance system. They called it ARMOR and they implemented it on the Fourier GR-1 robot. What is ARMOR? 👘 ARMOR is a system that helps humanoid robots "see" their surroundings better by using small, smart depth sensors placed on their arms. It solves the problem of blind spots and occlusions in traditional robot perception, making robots much safer and more efficient. It uses Time-of-Flight (ToF) sensors to detect obstacles, providing a near-complete view of the robot’s environment. 🔭 A smart software powered by transformer-based AI learns from human movements to help robots plan their actions dynamically. ARMOR reduces collisions by an impressive 63.7%, making robots significantly better at navigating crowded or complex spaces. The system is fast as well! 💨 ARMOR-Policy cuts computational time by 26× compared to traditional planning methods, ensuring robots can act quickly. P.S. Thoughts on this? The research paper is in the comments! ~~~ ♻️ RT to help 1 robot find a new workplace.
1:31

🚨 Apple joins the robotics race! Researchers from Carnegie Mellon University and Apple have developed a robot collision avoidance system. They called it ARMOR and they implemented it on the Fourier GR-1 robot. What is ARMOR? 👘 ARMOR is a system that helps humanoid robots "see" their surroundings better by using small, smart depth sensors placed on their arms. It solves the problem of blind spots and occlusions in traditional robot perception, making robots much safer and more efficient. It uses Time-of-Flight (ToF) sensors to detect obstacles, providing a near-complete view of the robot’s environment. 🔭 A smart software powered by transformer-based AI learns from human movements to help robots plan their actions dynamically. ARMOR reduces collisions by an impressive 63.7%, making robots significantly better at navigating crowded or complex spaces. The system is fast as well! 💨 ARMOR-Policy cuts computational time by 26× compared to traditional planning methods, ensuring robots can act quickly. P.S. Thoughts on this? The research paper is in the comments! ~~~ ♻️ RT to help 1 robot find a new workplace.

Lukas Ziegler

169,472 просмотров • 1 год назад

This robot is playing Tetris! 🧊 AGILOX dropped something exciting at LogiMAT. One of the most requested robot use cases finally automated: Manual truck loading. What I'm really impressed of is the high precision positioning of pallets directly next to the truck or container wall. It's 2026 and I love that fact that AMR companies are not just moving goods from A to B anymore, but they innovate and look for more value-adding tasks across logistics sites and manufacturing plants! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:28

This robot is playing Tetris! 🧊 AGILOX dropped something exciting at LogiMAT. One of the most requested robot use cases finally automated: Manual truck loading. What I'm really impressed of is the high precision positioning of pallets directly next to the truck or container wall. It's 2026 and I love that fact that AMR companies are not just moving goods from A to B anymore, but they innovate and look for more value-adding tasks across logistics sites and manufacturing plants! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

11,998 просмотров • 3 месяцев назад

Robots moving railcars! 🚃 Did you know that KUKA is also in the mobile robots business? Yes, you heard that right. And not just any robots. Robots that carry up to 56 tons! 🏋🏼 The railcar production process is highly complex, particularly when moving massive cars sideways within a plant. This challenge has been addressed at the Siemens facility in Germany using the OmniMove system from KUKA. The system allows for precise positioning, enabling the units to lift, move, and lower railcars with remarkable accuracy. With Mecanum wheels, the OmniMove units can move seamlessly in any direction, making the process incredibly efficient. Together, these units are capable of lifting up to 56 tons, streamlining heavy railcar production. This one is clearly tele-operated, but just looking at it makes me feel safer when I see a human in the loop. What a great use case for mobile robots! 😮‍💨 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:38

Robots moving railcars! 🚃 Did you know that KUKA is also in the mobile robots business? Yes, you heard that right. And not just any robots. Robots that carry up to 56 tons! 🏋🏼 The railcar production process is highly complex, particularly when moving massive cars sideways within a plant. This challenge has been addressed at the Siemens facility in Germany using the OmniMove system from KUKA. The system allows for precise positioning, enabling the units to lift, move, and lower railcars with remarkable accuracy. With Mecanum wheels, the OmniMove units can move seamlessly in any direction, making the process incredibly efficient. Together, these units are capable of lifting up to 56 tons, streamlining heavy railcar production. This one is clearly tele-operated, but just looking at it makes me feel safer when I see a human in the loop. What a great use case for mobile robots! 😮‍💨 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

19,148 просмотров • 21 дней назад

A high-quality haptic control for robots as a weekend project? All for under $600. [📍 Save Github & arXiv for later] A team built DOGlove, an open-source haptic glove for robot teleoperation that you can assemble yourself for under $600. It is built for real control, not demos. • Tracks 21 degrees of freedom with a custom joint design • Provides cable-driven force feedback plus fingertip haptics • Can be used to collect data for imitation learning Affordable haptics could make teleoperation more reliable and improve the quality of data we use to train physical AI. Project link: Credit: DOGlove team, shared by Han Zhang —- Weekly robotics and AI insights. Subscribe free:
2:39

A high-quality haptic control for robots as a weekend project? All for under $600. [📍 Save Github & arXiv for later] A team built DOGlove, an open-source haptic glove for robot teleoperation that you can assemble yourself for under $600. It is built for real control, not demos. • Tracks 21 degrees of freedom with a custom joint design • Provides cable-driven force feedback plus fingertip haptics • Can be used to collect data for imitation learning Affordable haptics could make teleoperation more reliable and improve the quality of data we use to train physical AI. Project link: Credit: DOGlove team, shared by Han Zhang —- Weekly robotics and AI insights. Subscribe free:

Ilir Aliu

18,290 просмотров • 6 месяцев назад

Modern AI is confined to the digital world. At Skild AI, we are building towards AGI for the real world, unconstrained by robot type or task — a single, omni-bodied brain. Today, we are sharing our journey, starting with early milestones, with more to come in the weeks ahead. Our Mission: Artificial General Intelligence grounded in the physical world. We believe AGI that can truly understand and reason in the real world can only be built through grounding in the physical world. Our Vision: Any robot, Any task, One brain. We tackle robotics in its full generality – building a continually improving, omni-bodied brain that can control any hardware for any task. Who are we? A passionate group of scientists & engineers driven by our shared vision. We have been researching AI and robotics for more than a decade. Our team includes pioneers of self-supervised learning, curiosity-driven exploration, end-to-end sim2real for visual locomotion, dexterous manipulation, learning from human videos, robot parkour, and many more. Many of these works have won awards at top-tier AI and Robotics conferences. Our team has also built production-ready systems at Anduril, Tesla, Nvidia, Meta, Kitty Hawk, Google, Everyday Robotics, and Amazon. Join us in our mission to build the robot brains of tomorrow.
2:48

Modern AI is confined to the digital world. At Skild AI, we are building towards AGI for the real world, unconstrained by robot type or task — a single, omni-bodied brain. Today, we are sharing our journey, starting with early milestones, with more to come in the weeks ahead. Our Mission: Artificial General Intelligence grounded in the physical world. We believe AGI that can truly understand and reason in the real world can only be built through grounding in the physical world. Our Vision: Any robot, Any task, One brain. We tackle robotics in its full generality – building a continually improving, omni-bodied brain that can control any hardware for any task. Who are we? A passionate group of scientists & engineers driven by our shared vision. We have been researching AI and robotics for more than a decade. Our team includes pioneers of self-supervised learning, curiosity-driven exploration, end-to-end sim2real for visual locomotion, dexterous manipulation, learning from human videos, robot parkour, and many more. Many of these works have won awards at top-tier AI and Robotics conferences. Our team has also built production-ready systems at Anduril, Tesla, Nvidia, Meta, Kitty Hawk, Google, Everyday Robotics, and Amazon. Join us in our mission to build the robot brains of tomorrow.

Skild AI

382,738 просмотров • 11 месяцев назад

It's a 3D printer, and 3D assembly station! 🖨️ The Functgraph developed at Meiji University starts as a regular 3D printer but upgrades itself into a mini factory. It can print parts for its own tools, pick them up, clean them, and put them together, all by itself. Think of it like a robot that can 3D print a spatula, assemble it, and then use it to flip pancakes. 🥞 Instead of just printing objects, the Functgraph can actually perform physical tasks, like folding laundry or slicing vegetables, by using printed and assembled tools. It’s a step toward the idea of a robot that can download "apps" as physical skills, much like your phone downloads software! 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
1:00

It's a 3D printer, and 3D assembly station! 🖨️ The Functgraph developed at Meiji University starts as a regular 3D printer but upgrades itself into a mini factory. It can print parts for its own tools, pick them up, clean them, and put them together, all by itself. Think of it like a robot that can 3D print a spatula, assemble it, and then use it to flip pancakes. 🥞 Instead of just printing objects, the Functgraph can actually perform physical tasks, like folding laundry or slicing vegetables, by using printed and assembled tools. It’s a step toward the idea of a robot that can download "apps" as physical skills, much like your phone downloads software! 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

139,612 просмотров • 2 месяцев назад

This robot explores the world like a mouse! 🐁 That's an OG project, guess the year ;) A mouse-inspired bot called WhiskEye travels the world with 24 artificial whiskers and spiking neurons that mimic a nervous system. Recognizing familiar places is essential for engineering applications like robot navigation, where interactions with the real world are key. Combining information from multiple senses helps to make better accuracy and robustness, but challenges like mismatched data and sensor errors complicate this process. Inspired by how animals navigate seamlessly, researchers developed predictive coding, a self-supervised learning method based on the brain's visual cortex model. It combines visual and tactile cues from a robot, outperforming existing methods in recognizing places, even when some sensors fail. What a great project from BristolRoboticsLab and Sheffield Robotics! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:34

This robot explores the world like a mouse! 🐁 That's an OG project, guess the year ;) A mouse-inspired bot called WhiskEye travels the world with 24 artificial whiskers and spiking neurons that mimic a nervous system. Recognizing familiar places is essential for engineering applications like robot navigation, where interactions with the real world are key. Combining information from multiple senses helps to make better accuracy and robustness, but challenges like mismatched data and sensor errors complicate this process. Inspired by how animals navigate seamlessly, researchers developed predictive coding, a self-supervised learning method based on the brain's visual cortex model. It combines visual and tactile cues from a robot, outperforming existing methods in recognizing places, even when some sensors fail. What a great project from BristolRoboticsLab and Sheffield Robotics! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

36,775 просмотров • 6 месяцев назад

A new humanoid robot Spirit AI from China releases a new generation of wheeled humanoid robot Moz1 It is the first embodied intelligent robot with high-precision force control of the whole body, with 26 degrees of freedom, built based on the world's highest power density integrated force control joint. It takes speed, precision and safety to a higher level. It is worth mentioning that Moz1 is driven by SpiritAI's latest OneTwoVLA. It only needs one model to think and operate at the same time, and correct errors autonomously, just like humans, without separating the two systems of "thinking planning" and "coordinated execution". One system is seamlessly connected, which is conducive to dealing with complex, personalized, and immediate tasks, especially in home and care applications.
1:00

A new humanoid robot Spirit AI from China releases a new generation of wheeled humanoid robot Moz1 It is the first embodied intelligent robot with high-precision force control of the whole body, with 26 degrees of freedom, built based on the world's highest power density integrated force control joint. It takes speed, precision and safety to a higher level. It is worth mentioning that Moz1 is driven by SpiritAI's latest OneTwoVLA. It only needs one model to think and operate at the same time, and correct errors autonomously, just like humans, without separating the two systems of "thinking planning" and "coordinated execution". One system is seamlessly connected, which is conducive to dealing with complex, personalized, and immediate tasks, especially in home and care applications.

CyberRobo

26,755 просмотров • 1 год назад

Teaching robots to work smoothly with humans! 👀 Soon enough, a robot will be standing in the garage holding a flashlight for your dad, and doing a better job of it than you ever did. 🔦 Carnegie Mellon University and The University of Texas at Arlington researchers introduced HALO, a new method for robots to collaborate better with humans. When robots work with humans, they face unpredictable behavior. Every person moves differently, makes different decisions, and reacts differently to the robot. Traditional learning approaches struggle because the robot and human are fundamentally different, they think and move in completely different ways. This mismatch causes the robot's learning to become unstable, like trying to balance on a wobbly chair. Mentioned research solves this by mathematically guaranteeing the robot's learning stays stable. Pushing objects together in sync, transporting items through tight spaces, and handling super-long objects that require coordination. Real humanoid-robot experiments show HALO handles tricky collaborative situations much better. How it works? It basically has 3 layers. Vision layer understands what needs to happen by looking at the scene. Coordination layer figures out how the robot and human should work together tactically. Control layer executes the movements with fast, stable whole-body control. 📜 Paper website: Congrats Ding Zhao + all co-authors! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
1:28

Teaching robots to work smoothly with humans! 👀 Soon enough, a robot will be standing in the garage holding a flashlight for your dad, and doing a better job of it than you ever did. 🔦 Carnegie Mellon University and The University of Texas at Arlington researchers introduced HALO, a new method for robots to collaborate better with humans. When robots work with humans, they face unpredictable behavior. Every person moves differently, makes different decisions, and reacts differently to the robot. Traditional learning approaches struggle because the robot and human are fundamentally different, they think and move in completely different ways. This mismatch causes the robot's learning to become unstable, like trying to balance on a wobbly chair. Mentioned research solves this by mathematically guaranteeing the robot's learning stays stable. Pushing objects together in sync, transporting items through tight spaces, and handling super-long objects that require coordination. Real humanoid-robot experiments show HALO handles tricky collaborative situations much better. How it works? It basically has 3 layers. Vision layer understands what needs to happen by looking at the scene. Coordination layer figures out how the robot and human should work together tactically. Control layer executes the movements with fast, stable whole-body control. 📜 Paper website: Congrats Ding Zhao + all co-authors! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

28,192 просмотров • 2 месяцев назад

Feeling what a robot feels is becoming real! 🫰 Fluid Reality just ran its first full end-to-end touch teleoperation system, and the demo shows why high-resolution haptics might be the missing piece in robot control. A 22 mm fingertip display with 32 independently actuated “bubbles” was mapped directly to tactile sensors on a robot hand. 🫧 Three fingers streamed real-time touch data robot → human, giving the operator actual contact feedback instead of waving their hands blind, like most teleop systems today. It’s still early, but this is a real step toward dexterous ops and high-quality data for training Physical AI systems. Companies involved: Samsung Electronics, Alt-Bionics, Inc. (the robot hand), MANUS™ (hand tracking), and Sensible Robotics (fingertip sensors) Touch isn’t a nice-to-have in robotics. It’s the difference between manipulation that works in the real world P.S. Guess how many touch receptors we humans, have in our hand! :) ~~ ♻ Join the weekly robotics newsletter, and never miss any news →
1:23

Feeling what a robot feels is becoming real! 🫰 Fluid Reality just ran its first full end-to-end touch teleoperation system, and the demo shows why high-resolution haptics might be the missing piece in robot control. A 22 mm fingertip display with 32 independently actuated “bubbles” was mapped directly to tactile sensors on a robot hand. 🫧 Three fingers streamed real-time touch data robot → human, giving the operator actual contact feedback instead of waving their hands blind, like most teleop systems today. It’s still early, but this is a real step toward dexterous ops and high-quality data for training Physical AI systems. Companies involved: Samsung Electronics, Alt-Bionics, Inc. (the robot hand), MANUS™ (hand tracking), and Sensible Robotics (fingertip sensors) Touch isn’t a nice-to-have in robotics. It’s the difference between manipulation that works in the real world P.S. Guess how many touch receptors we humans, have in our hand! :) ~~ ♻ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

46,829 просмотров • 7 месяцев назад