Video wird geladen...

Video konnte nicht geladen werden

Beim Laden dieses Videos ist ein Problem aufgetreten. Dies könnte an einem vorübergehenden Netzwerkproblem liegen oder das Video ist möglicherweise nicht verfügbar.

Check out Robuild's autonomous construction robots They recently completed a 500 ft² LVP flooring installation, with 600 install planned by 2026. A few tech details: • Labour shortages & cost savings are driving developers to look at robotics • The system works in busy, varied houses and uses onboard... show more

Jack 🤖

12,376 subscribers

223,954 Aufrufe • vor 1 Jahr •via X (Twitter)

Gesundheit & Wellness Wissenschaft & Technologie Nachrichten & Politik

Anya Rossi• Live Now

Private livecam show

11 Kommentare

Profilbild von ICanAutomateThat

ICanAutomateThatvor 1 Jahr

Wait they are putting that plastic shit OVER REAL HARDWOOD?!

Profilbild von Jack 🤖

Jack 🤖vor 1 Jahr

Plastic chique

Profilbild von Wonderchat

Wonderchatvor 2 Jahren

Automate up to 70% of your customer support today. Save time and help your users find answers quickly. Try now at

Profilbild von Gary Basin

Gary Basinvor 1 Jahr

Why did they put the fake wood on the real wood though

Profilbild von johnson

johnsonvor 1 Jahr

How to make a nice floor ugly - automated edition.

Profilbild von Jack 🤖

Jack 🤖vor 1 Jahr

Hey now its a demo 😅

Profilbild von sierra catalina

sierra catalinavor 1 Jahr

listen I love the bot. but fuck the humans that covered that beautiful natural hardwood with laminate bs.

Profilbild von CWConstruction

CWConstructionvor 1 Jahr

Bro went for a ciggy break at 23 seconds

Profilbild von Jack 🤖

Jack 🤖vor 1 Jahr

He is a tradey after all

Profilbild von Unix

Unixvor 1 Jahr

I like the way that they conveniently cut the video any time they need to add a cut down end piece. I'm a fan of robotics but "look at this robot place flat objects on the flat ground" is not a good advertisement. A Roomba is more impressive.

Profilbild von SpaceBob

SpaceBobvor 1 Jahr

Can it cut door jams and install under the jam?

Ähnliche Videos

Mushroom picking robots! 🍄‍🟫 A Canadian ag-tech startup, Mycionics, has built a robotic system that aims to bring more innovation into mushroom harvesting. 🇨🇦 Their setup uses dual-arm gantry robots, machine vision, and soft-grip tools to pick mushrooms. The system doesn't replace humans entirely, but works collaboratively, handling repetitive tasks like picking, packing, and sorting, while also scanning each mushroom for real-time analytics. It integrates with existing farm setups and scales easily. Already rolling out in North America, with European expansion underway. By improving consistency and boosting yields up to 8%, Mycionics tackles labor shortages and food safety—showing how robotics can elevate even the most delicate, niche farming tasks. Mushrooms, be ready, robots are coming for ya! 🍄

Mushroom picking robots! 🍄‍🟫 A Canadian ag-tech startup, Mycionics, has built a robotic system that aims to bring more innovation into mushroom harvesting. 🇨🇦 Their setup uses dual-arm gantry robots, machine vision, and soft-grip tools to pick mushrooms. The system doesn't replace humans entirely, but works collaboratively, handling repetitive tasks like picking, packing, and sorting, while also scanning each mushroom for real-time analytics. It integrates with existing farm setups and scales easily. Already rolling out in North America, with European expansion underway. By improving consistency and boosting yields up to 8%, Mycionics tackles labor shortages and food safety—showing how robotics can elevate even the most delicate, niche farming tasks. Mushrooms, be ready, robots are coming for ya! 🍄

Lukas Ziegler

25,367 Aufrufe • vor 1 Jahr

Check out this drone: Joshua Bird built this drone ($20) in his dorm! [open-source motion capture system⬇️] Built at low cost, a motion capture system for tracking & and flying drones autonomously, with millimeter-level precision at room-scale. The student used $1 PS3 Eye cameras with 150fps capability. The challenge? PID tuning! It took him 4 days of crashes to get the drone to hover, but it's still wobbly. Used a 3x nested PID loop for precise control. This project led to his dissertation on visual SLAM! Full details - Algorithms for camera positioning & obstacle triangulation, in his YouTube video: Code & 3D files on GitHub: More projects at

Check out this drone: Joshua Bird built this drone ($20) in his dorm! [open-source motion capture system⬇️] Built at low cost, a motion capture system for tracking & and flying drones autonomously, with millimeter-level precision at room-scale. The student used $1 PS3 Eye cameras with 150fps capability. The challenge? PID tuning! It took him 4 days of crashes to get the drone to hover, but it's still wobbly. Used a 3x nested PID loop for precise control. This project led to his dissertation on visual SLAM! Full details - Algorithms for camera positioning & obstacle triangulation, in his YouTube video: Code & 3D files on GitHub: More projects at

Ilir Aliu

101,689 Aufrufe • vor 1 Jahr

🚨 BREAKING: ABB Robotics + NVIDIA close the sim-to-real gap with 99% accuracy! 👾 ABB Robotics is integrating NVIDIA Omniverse libraries into RobotStudio to deliver physical AI for industry, closing the gap from virtual training to real-world deployment with up to 99% accuracy. RobotStudio HyperReality, available second half of 2026, will fundamentally change how quickly manufacturers can scale production: reducing costs by up to 40%, accelerating time-to-market by 50%, and cutting setup and commissioning times by up to 80%. For decades, the deficit between simulation accuracy and real-world lighting, materials, and environments has limited manufacturers' ability to design advanced manufacturing processes in the virtual world. The only robot manufacturer with a virtual controller running the same firmware as the hardware, ensuring near-perfect correlation between simulation and real-world performance. The system uses physically accurate simulations and foundation models endlessly optimized with real-world data feedback. These models can train any number of ABB robots anywhere in the world with industrial-grade reliability. Foxconn is using RobotStudio HyperReality for consumer electronics assembly. Assembly robots are trained virtually using synthetic data to perfect multiple production processes across various scenarios, then moved to production lines with 99% accuracy. This eliminates physical training and tests, reducing setup times and costs. Workr is demonstrating AI-powered robotic systems at NVIDIA GTC 2026. Built on ABB technology, trained with synthetic data using NVIDIA Omniverse, deployed without operators needing programming knowledge . 🚨 I’ll be onsite in San Jose during GTC 2026, and will be showing all the cool stuff that ABB Robotics prepared this year! Can’t wait! 🫡 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

🚨 BREAKING: ABB Robotics + NVIDIA close the sim-to-real gap with 99% accuracy! 👾 ABB Robotics is integrating NVIDIA Omniverse libraries into RobotStudio to deliver physical AI for industry, closing the gap from virtual training to real-world deployment with up to 99% accuracy. RobotStudio HyperReality, available second half of 2026, will fundamentally change how quickly manufacturers can scale production: reducing costs by up to 40%, accelerating time-to-market by 50%, and cutting setup and commissioning times by up to 80%. For decades, the deficit between simulation accuracy and real-world lighting, materials, and environments has limited manufacturers' ability to design advanced manufacturing processes in the virtual world. The only robot manufacturer with a virtual controller running the same firmware as the hardware, ensuring near-perfect correlation between simulation and real-world performance. The system uses physically accurate simulations and foundation models endlessly optimized with real-world data feedback. These models can train any number of ABB robots anywhere in the world with industrial-grade reliability. Foxconn is using RobotStudio HyperReality for consumer electronics assembly. Assembly robots are trained virtually using synthetic data to perfect multiple production processes across various scenarios, then moved to production lines with 99% accuracy. This eliminates physical training and tests, reducing setup times and costs. Workr is demonstrating AI-powered robotic systems at NVIDIA GTC 2026. Built on ABB technology, trained with synthetic data using NVIDIA Omniverse, deployed without operators needing programming knowledge . 🚨 I’ll be onsite in San Jose during GTC 2026, and will be showing all the cool stuff that ABB Robotics prepared this year! Can’t wait! 🫡 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

22,482 Aufrufe • vor 4 Monaten

Physics AI 🌊 Jensen just unveiled the NVIDIA Isaac GR00T Reference Humanoid Robot at GTC Taipei--the world’s first open-source humanoid robot reference design Built on Jetson Thor edge computing and the Isaac GR00T open platform, it features a Unitree H2 Plus body with Sharpa five-finger dexterous hands and 75 degrees of freedom. Even before Physical AI truly explodes, NVIDIA has built a complete end-to-end full-stack infrastructure: >chips (Jetson Thor + Blackwell), >synthetic data (GR00T-Dreams), >world models (Cosmos), >foundation models (GR00T N-series VLA), >high-fidelity simulation platforms (Isaac Sim + Isaac Lab + Omniverse). Dozens of humanoid robot companies ,including Agility Robotics, Aglie robotics,Boston Dynamics, Figure, 1X, NEURA Robotics, XPENG Robotics, and more are already running large-scale daily simulation training on this platform, rapidly iterating perception, reasoning, and actions in virtual environments, speeding up the jump from lab prototypes to real factory deployment. By providing an open reference design and full-stack tools, NVIDIA has dramatically lowered the barrier, letting every robotics team join the Physical AI wave with low cost and high efficiency.

Physics AI 🌊 Jensen just unveiled the NVIDIA Isaac GR00T Reference Humanoid Robot at GTC Taipei--the world’s first open-source humanoid robot reference design Built on Jetson Thor edge computing and the Isaac GR00T open platform, it features a Unitree H2 Plus body with Sharpa five-finger dexterous hands and 75 degrees of freedom. Even before Physical AI truly explodes, NVIDIA has built a complete end-to-end full-stack infrastructure: >chips (Jetson Thor + Blackwell), >synthetic data (GR00T-Dreams), >world models (Cosmos), >foundation models (GR00T N-series VLA), >high-fidelity simulation platforms (Isaac Sim + Isaac Lab + Omniverse). Dozens of humanoid robot companies ,including Agility Robotics, Aglie robotics,Boston Dynamics, Figure, 1X, NEURA Robotics, XPENG Robotics, and more are already running large-scale daily simulation training on this platform, rapidly iterating perception, reasoning, and actions in virtual environments, speeding up the jump from lab prototypes to real factory deployment. By providing an open reference design and full-stack tools, NVIDIA has dramatically lowered the barrier, letting every robotics team join the Physical AI wave with low cost and high efficiency.

CyberRobo

17,092 Aufrufe • vor 2 Monaten

Another awesome robotics company raised funds in Europe. 🇪🇺 This time a company that is shipping robots that build! Monumental has raised $32M Series B led by Khosla Ventures, and its fleet of autonomous bricklaying robots has already built more than 100 real structures across Europe. Houses. A school. A community centre. A hotel. Canal walls. Founded by Salar al Khafaji al Khafaji and Sebastiaan Visser, the co-founders of data visualisation firm Silk, acquired by Palantir in 2016, this is a team that knows how to build and sell a company. The technology is serious: → Fleet of 100+ electric autonomous robots operating on live job sites today → Advanced sensors, computer vision and small cranes laying brick to millimetre precision → All driven by Atrium, their proprietary AI software platform → Nearly half of all homes built in the last three months alone, pace is compounding fast The business model is also worth taking a look at. Contractors don't buy the robots. They hire Monumental as an autonomous subcontractor and pay for finished wall. So in the end you only pay for the output. This is the same forward-deployed engineering model Palantir pioneered in software. Monumental brought it to physical robotics years before anyone else in the industry caught on. The backdrop makes this urgent. US construction is short 200,000-400,000 workers every month. Since 1945, US manufacturing productivity rose eightfold. Construction gained just 10%, and has actually declined since the 1960s. LET'S MAKE CONSTRUCTION BUSINESSES SEXY AGAIN! 🧱 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Another awesome robotics company raised funds in Europe. 🇪🇺 This time a company that is shipping robots that build! Monumental has raised $32M Series B led by Khosla Ventures, and its fleet of autonomous bricklaying robots has already built more than 100 real structures across Europe. Houses. A school. A community centre. A hotel. Canal walls. Founded by Salar al Khafaji al Khafaji and Sebastiaan Visser, the co-founders of data visualisation firm Silk, acquired by Palantir in 2016, this is a team that knows how to build and sell a company. The technology is serious: → Fleet of 100+ electric autonomous robots operating on live job sites today → Advanced sensors, computer vision and small cranes laying brick to millimetre precision → All driven by Atrium, their proprietary AI software platform → Nearly half of all homes built in the last three months alone, pace is compounding fast The business model is also worth taking a look at. Contractors don't buy the robots. They hire Monumental as an autonomous subcontractor and pay for finished wall. So in the end you only pay for the output. This is the same forward-deployed engineering model Palantir pioneered in software. Monumental brought it to physical robotics years before anyone else in the industry caught on. The backdrop makes this urgent. US construction is short 200,000-400,000 workers every month. Since 1945, US manufacturing productivity rose eightfold. Construction gained just 10%, and has actually declined since the 1960s. LET'S MAKE CONSTRUCTION BUSINESSES SEXY AGAIN! 🧱 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

72,767 Aufrufe • vor 13 Tagen

Japan Just Built a HouseBot You Control Without Speaking and It Changes Everything! Donut Robotics has officially unveiled its first bipedal humanoid, Cinnamon 1, and instead of focusing on louder voices or bigger motors, the company went in the opposite direction. Silence. Cinnamon 1 introduces what Donut Robotics calls Silent Gesture Control, a system that allows the humanoid to be guided using simple hand and finger movements rather than spoken commands. This approach feels especially well suited for real world environments where traditional voice control falls apart. Busy factory floors. Construction sites filled with constant noise. Even quiet indoor settings where voice commands feel awkward or intrusive. It also opens the door for far more accessible human robot interaction, particularly for users with impairments. While the current Cinnamon 1 hardware is built on an OEM platform, the intelligence driving it is where Donut Robotics is placing its long term bet. The team is actively developing custom Vision Language Action AI that allows the robot to interpret what it sees, understand intent, and respond with physical action. The goal is not just smarter robots, but robots that feel more natural. Even more ambitious is the company’s plan for full domestic production. Donut Robotics has stated its intention to localize both manufacturing and AI development in Japan, reinforcing the country’s reputation for precision engineering and thoughtful robotics design. If timelines hold, Cinnamon 1 units are expected to begin deployment in factories and construction environments by the end of 2026. That puts this humanoid squarely in the category of near term reality rather than distant concept. The takeaway is simple but important. As humanoid robots move out of labs and into daily work environments, the winners may not be the loudest or flashiest machines. They may be the ones that understand us without a word being spoken.

Japan Just Built a HouseBot You Control Without Speaking and It Changes Everything! Donut Robotics has officially unveiled its first bipedal humanoid, Cinnamon 1, and instead of focusing on louder voices or bigger motors, the company went in the opposite direction. Silence. Cinnamon 1 introduces what Donut Robotics calls Silent Gesture Control, a system that allows the humanoid to be guided using simple hand and finger movements rather than spoken commands. This approach feels especially well suited for real world environments where traditional voice control falls apart. Busy factory floors. Construction sites filled with constant noise. Even quiet indoor settings where voice commands feel awkward or intrusive. It also opens the door for far more accessible human robot interaction, particularly for users with impairments. While the current Cinnamon 1 hardware is built on an OEM platform, the intelligence driving it is where Donut Robotics is placing its long term bet. The team is actively developing custom Vision Language Action AI that allows the robot to interpret what it sees, understand intent, and respond with physical action. The goal is not just smarter robots, but robots that feel more natural. Even more ambitious is the company’s plan for full domestic production. Donut Robotics has stated its intention to localize both manufacturing and AI development in Japan, reinforcing the country’s reputation for precision engineering and thoughtful robotics design. If timelines hold, Cinnamon 1 units are expected to begin deployment in factories and construction environments by the end of 2026. That puts this humanoid squarely in the category of near term reality rather than distant concept. The takeaway is simple but important. As humanoid robots move out of labs and into daily work environments, the winners may not be the loudest or flashiest machines. They may be the ones that understand us without a word being spoken.

The AI Robot Guy on X

257,928 Aufrufe • vor 6 Monaten

Been looking into RICE AI ( ◉ - ◉ ) lately, and it’s one of the few projects actually tackling a real challenge in robotics and AGI: the lack of high-quality training data. Robots can’t get truly intelligent without it. They building a decentralized way to collect and share robotics data, using a DePIN network to train physical AI foundation models. The project was even hand-picked by CZ as a winner of the Dubai BNB Chain Demo Day, and it’s backed by Floki while also being part of the NVIDIA Inception Program. They also launched FLOKI Minibot M1 - a small AI companion that doubles as a data node. Every interaction with it feeds the RICE AI Foundry, the first decentralized platform for Robotics Foundation Models, and contributors earn $RICE tokens in return. And it’s working: – 800 minibots sold in 24h – 33,000% oversubscribed Binance IDO – 500+ robots already deployed worldwide Feels like a project with real long-term potential. Worth keeping an eye on. RICE AI ( ◉ - ◉ )

Been looking into RICE AI ( ◉ - ◉ ) lately, and it’s one of the few projects actually tackling a real challenge in robotics and AGI: the lack of high-quality training data. Robots can’t get truly intelligent without it. They building a decentralized way to collect and share robotics data, using a DePIN network to train physical AI foundation models. The project was even hand-picked by CZ as a winner of the Dubai BNB Chain Demo Day, and it’s backed by Floki while also being part of the NVIDIA Inception Program. They also launched FLOKI Minibot M1 - a small AI companion that doubles as a data node. Every interaction with it feeds the RICE AI Foundry, the first decentralized platform for Robotics Foundation Models, and contributors earn $RICE tokens in return. And it’s working: – 800 minibots sold in 24h – 33,000% oversubscribed Binance IDO – 500+ robots already deployed worldwide Feels like a project with real long-term potential. Worth keeping an eye on. RICE AI ( ◉ - ◉ )

Christiaan

12,696 Aufrufe • vor 11 Monaten

Robots working arm in arm in labs! 🧪 I know that nowadays (all the humanoids, quadrupeds and fancy mobile manipualtors) such applications no longer generate as much excitement as they used to. However, they are still great applications in a very demanding market, where they serve as a SUPER VALUABLE tool for people from the first day of installation. From chemical plants to biotech labs, much of today’s research still depends on manual labor, often with staff working long hours around hazardous substances. LabBotics and Flexiv Robotics are working to change that with new lab automation platforms. By combining adaptive robots, smart grippers, and advanced vision these systems can take on the work of a lab assistant: performing tasks with consistent precision, and keeping people out of harm’s way. The result is safer labs, higher throughput, and fewer errors. ⛔️

Robots working arm in arm in labs! 🧪 I know that nowadays (all the humanoids, quadrupeds and fancy mobile manipualtors) such applications no longer generate as much excitement as they used to. However, they are still great applications in a very demanding market, where they serve as a SUPER VALUABLE tool for people from the first day of installation. From chemical plants to biotech labs, much of today’s research still depends on manual labor, often with staff working long hours around hazardous substances. LabBotics and Flexiv Robotics are working to change that with new lab automation platforms. By combining adaptive robots, smart grippers, and advanced vision these systems can take on the work of a lab assistant: performing tasks with consistent precision, and keeping people out of harm’s way. The result is safer labs, higher throughput, and fewer errors. ⛔️

Lukas Ziegler

20,413 Aufrufe • vor 10 Monaten

Simulation-first approach to robotic production lines! 👾 At Hannover Messe, Amazon Web Services (AWS) and SoftServe are demonstrating a fully autonomous, AI-powered manufacturing workflow. Design a product using generative AI, then watch it move through the entire process: engraving, inspection, and delivery, handled by a mix of robots working together powered by physical AI on AWS. The interesting part is how the system is built. Getting robots into production is usually where things fall apart. SoftServe takes a simulation-first approach using AWS. They build and test the entire system virtually: robot behavior, production flow, before deploying anything physically. This enables faster iteration, safe edge case testing, and significantly reduced sim-to-real gap. Their demo includes AMRs handling transport, cobots doing precise manipulation, AI-driven quality inspection, and humanoid interaction at the end. All connected through a unified, software-defined layer powered by AWS. It's about building a system where robots can adapt, coordinate, and scale without rebuilding everything from scratch every time. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Simulation-first approach to robotic production lines! 👾 At Hannover Messe, Amazon Web Services (AWS) and SoftServe are demonstrating a fully autonomous, AI-powered manufacturing workflow. Design a product using generative AI, then watch it move through the entire process: engraving, inspection, and delivery, handled by a mix of robots working together powered by physical AI on AWS. The interesting part is how the system is built. Getting robots into production is usually where things fall apart. SoftServe takes a simulation-first approach using AWS. They build and test the entire system virtually: robot behavior, production flow, before deploying anything physically. This enables faster iteration, safe edge case testing, and significantly reduced sim-to-real gap. Their demo includes AMRs handling transport, cobots doing precise manipulation, AI-driven quality inspection, and humanoid interaction at the end. All connected through a unified, software-defined layer powered by AWS. It's about building a system where robots can adapt, coordinate, and scale without rebuilding everything from scratch every time. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

17,709 Aufrufe • vor 3 Monaten

Video: World’s first humanoid robot labor that swaps its own batteries to work endlessly | Jijo Malayil, Interesting Engineering Walker S2 uses dual-battery balancing and standardized modules to boost efficiency and ensure uninterrupted, optimized performance. In a leap for robotics, China’s UBTech has unveiled the Walker S2, the world’s first humanoid robot capable of fully autonomous battery swapping. Designed for non-stop industrial operations, the Walker S2 can replace its own power pack in just three minutes—no human intervention required. Equipped with advanced anthropomorphic bipedal locomotion and a hot-swappable battery system, Walker S2 is built to operate 24/7 across dynamic industrial environments. According to UBTech, the next-generation humanoid robot marks a major milestone in automation, bringing continuous, hands-free performance to the factory floor. In May 2025, UBTech Robotics and Huawei Technologies inked a significant partnership to accelerate the adoption of humanoid robots across China’s factories and households. Uninterrupted robot operations A video posted by the robotics firm opens with the sleek UBTech Walker S2 humanoid robot working in an industrial setting. The highlight, however, is its autonomous battery swap. Walker S2 approaches the charging station, carefully detaches its depleted power pack, and seamlessly installs a fresh one—all within about three minutes—without any human assistance, according to CGTN. The camera captures close-ups of the robot’s articulated limbs and the intelligent battery-handling mechanism, conveying precision and reliability. As the swap completes, Walker S2 resumes its duties, reinforcing the promise of uninterrupted, 24/7 operations in dynamic factory environments. UBTech’s Walker S2 humanoid robot is equipped with advanced dual-battery power balancing technology and uses standardized battery modules to optimize performance, reports CNEVPOST. This dual-battery system allows the robot to automatically switch to a backup battery in case of a main battery failure, ensuring that critical tasks are carried out without interruption. In addition to battery swapping, the robot can intelligently choose between charging and swapping based on task urgency, allowing it to manage energy dynamically and adapt to real-time operational demands. UBTech highlights these features as a step forward in deploying humanoid robots for industrial and domestic applications, combining flexibility, reliability, and autonomy in one intelligent platform. Factory intelligence upgrade Earlier in the year, UBTech unveiled a major advancement in humanoid robot collaboration, claiming the world’s first deployment of multiple humanoids working together across varied industrial tasks. Demonstrated at Zeekr’s 5G-enabled smart factory, the breakthrough centers on UBTech’s “BrainNet” framework, which orchestrates cooperative behavior through a cloud-device intelligence system. BrainNet integrates a “super brain” for high-level decision-making with an “intelligent sub-brain” for distributed multi-robot control. The super brain, powered by a proprietary large-scale multimodal reasoning model, handles complex production-line scheduling and decision-making. Meanwhile, the sub-brain coordinates real-time tasks using cross-field perception and Transformer-based control for dynamic adaptability. Together, they enable the Walker S1 humanoid robots to move beyond isolated operations and perform coordinated tasks with high precision and speed. The system is built on DeepSeek-R1 reasoning technology and trained on real-world data from automotive factory settings. Leveraging Retrieval-Augmented Generation (RAG), the model adapts to specific job functions and improves scalability across workstations. At Zeekr’s facility, dozens of Walker S1s now collaborate on tasks like assembly, inspection, and part handling. Using semantic VSLAM and shared mapping, they coordinate seamlessly via vision-based navigation and agile manipulation. UBTech says this marks a transition to “Practical Training 2.0,” where humanoid robots operate as a swarm, maximizing efficiency and setting the stage for next-generation intelligent manufacturing.

Video: World’s first humanoid robot labor that swaps its own batteries to work endlessly | Jijo Malayil, Interesting Engineering Walker S2 uses dual-battery balancing and standardized modules to boost efficiency and ensure uninterrupted, optimized performance. In a leap for robotics, China’s UBTech has unveiled the Walker S2, the world’s first humanoid robot capable of fully autonomous battery swapping. Designed for non-stop industrial operations, the Walker S2 can replace its own power pack in just three minutes—no human intervention required. Equipped with advanced anthropomorphic bipedal locomotion and a hot-swappable battery system, Walker S2 is built to operate 24/7 across dynamic industrial environments. According to UBTech, the next-generation humanoid robot marks a major milestone in automation, bringing continuous, hands-free performance to the factory floor. In May 2025, UBTech Robotics and Huawei Technologies inked a significant partnership to accelerate the adoption of humanoid robots across China’s factories and households. Uninterrupted robot operations A video posted by the robotics firm opens with the sleek UBTech Walker S2 humanoid robot working in an industrial setting. The highlight, however, is its autonomous battery swap. Walker S2 approaches the charging station, carefully detaches its depleted power pack, and seamlessly installs a fresh one—all within about three minutes—without any human assistance, according to CGTN. The camera captures close-ups of the robot’s articulated limbs and the intelligent battery-handling mechanism, conveying precision and reliability. As the swap completes, Walker S2 resumes its duties, reinforcing the promise of uninterrupted, 24/7 operations in dynamic factory environments. UBTech’s Walker S2 humanoid robot is equipped with advanced dual-battery power balancing technology and uses standardized battery modules to optimize performance, reports CNEVPOST. This dual-battery system allows the robot to automatically switch to a backup battery in case of a main battery failure, ensuring that critical tasks are carried out without interruption. In addition to battery swapping, the robot can intelligently choose between charging and swapping based on task urgency, allowing it to manage energy dynamically and adapt to real-time operational demands. UBTech highlights these features as a step forward in deploying humanoid robots for industrial and domestic applications, combining flexibility, reliability, and autonomy in one intelligent platform. Factory intelligence upgrade Earlier in the year, UBTech unveiled a major advancement in humanoid robot collaboration, claiming the world’s first deployment of multiple humanoids working together across varied industrial tasks. Demonstrated at Zeekr’s 5G-enabled smart factory, the breakthrough centers on UBTech’s “BrainNet” framework, which orchestrates cooperative behavior through a cloud-device intelligence system. BrainNet integrates a “super brain” for high-level decision-making with an “intelligent sub-brain” for distributed multi-robot control. The super brain, powered by a proprietary large-scale multimodal reasoning model, handles complex production-line scheduling and decision-making. Meanwhile, the sub-brain coordinates real-time tasks using cross-field perception and Transformer-based control for dynamic adaptability. Together, they enable the Walker S1 humanoid robots to move beyond isolated operations and perform coordinated tasks with high precision and speed. The system is built on DeepSeek-R1 reasoning technology and trained on real-world data from automotive factory settings. Leveraging Retrieval-Augmented Generation (RAG), the model adapts to specific job functions and improves scalability across workstations. At Zeekr’s facility, dozens of Walker S1s now collaborate on tasks like assembly, inspection, and part handling. Using semantic VSLAM and shared mapping, they coordinate seamlessly via vision-based navigation and agile manipulation. UBTech says this marks a transition to “Practical Training 2.0,” where humanoid robots operate as a swarm, maximizing efficiency and setting the stage for next-generation intelligent manufacturing.

Owen Gregorian

35,637 Aufrufe • vor 1 Jahr

Enabling autonomous vehicles perceive their environment using only off-the-shelf cameras has been a long term research objective at Swaayatt Robots. This demo highlights the capabilities of our on-road perception system which is able to detect obstacles, road boundaries, lane markers in images, as well as compute depth of the complex scenes in the environment. The output shown in this video is end-to-end raw output from our deep learning system, without any post processing. The current system, with joint computation of obstacles, lane/road boundaries, and depth, works at 30 FPS on an embedded GPU in our autonomous vehicle, and can achieve higher FPS with further optimization -- which is currently a research in progress. This system is being scaled up for both the day and night operations, and we will showcase its strength towards enabling autonomous driving on a mountainous environment with unpaved roads, in the absence of any delimiters. #deeplearning #autonomousdriving #autonomousvehicles #machinelearning

Enabling autonomous vehicles perceive their environment using only off-the-shelf cameras has been a long term research objective at Swaayatt Robots. This demo highlights the capabilities of our on-road perception system which is able to detect obstacles, road boundaries, lane markers in images, as well as compute depth of the complex scenes in the environment. The output shown in this video is end-to-end raw output from our deep learning system, without any post processing. The current system, with joint computation of obstacles, lane/road boundaries, and depth, works at 30 FPS on an embedded GPU in our autonomous vehicle, and can achieve higher FPS with further optimization -- which is currently a research in progress. This system is being scaled up for both the day and night operations, and we will showcase its strength towards enabling autonomous driving on a mountainous environment with unpaved roads, in the absence of any delimiters. #deeplearning #autonomousdriving #autonomousvehicles #machinelearning

Sanjeev Sharma

18,478 Aufrufe • vor 1 Jahr

🚨 BREAKING: Big news in the computer vision world! 🎥 Luxonis | Robotic Vision just dropped its new OAK 4 line, and it’s a big upgrade for edge computer vision. Instead of being “just a stereo camera,” OAK 4 is a fully standalone vision computer with 52 TOPS of on-device AI. Models run locally, depth is computed locally, and no external PC or cloud pipeline is required. This is why robotics teams love it: lower latency, lower cost, fewer failure points in the field. The hardware is built for the real-world. IP67, shock-resistant, wide-FOV RGB + stereo pair, IR projection, IMU, audio, and a patent-pending calibration system that keeps depth accurate even when conditions change. But the real move is the platform. With Luxonis Hub, you can deploy models, grab telemetry, push OTA updates, or collect data when performance drifts, all from a unified interface. It turns a single device into an end-to-end edge CV system. Most customers today in robotics are groups who just want something that works: AMRs, bin-picking systems, trailer-loading robots, and ag-tech. 🤖 And they all say the same thing, the appeal isn’t raw TOPS, it’s the all-in-one simplicity that lets them scale without building custom infrastructure. Feels like the direction edge vision has been waiting for: rugged hardware + high-throughput on-device compute + a real management layer. A next step toward “plug-and-deploy” perception for robots. 🔗 Find out more here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

🚨 BREAKING: Big news in the computer vision world! 🎥 Luxonis | Robotic Vision just dropped its new OAK 4 line, and it’s a big upgrade for edge computer vision. Instead of being “just a stereo camera,” OAK 4 is a fully standalone vision computer with 52 TOPS of on-device AI. Models run locally, depth is computed locally, and no external PC or cloud pipeline is required. This is why robotics teams love it: lower latency, lower cost, fewer failure points in the field. The hardware is built for the real-world. IP67, shock-resistant, wide-FOV RGB + stereo pair, IR projection, IMU, audio, and a patent-pending calibration system that keeps depth accurate even when conditions change. But the real move is the platform. With Luxonis Hub, you can deploy models, grab telemetry, push OTA updates, or collect data when performance drifts, all from a unified interface. It turns a single device into an end-to-end edge CV system. Most customers today in robotics are groups who just want something that works: AMRs, bin-picking systems, trailer-loading robots, and ag-tech. 🤖 And they all say the same thing, the appeal isn’t raw TOPS, it’s the all-in-one simplicity that lets them scale without building custom infrastructure. Feels like the direction edge vision has been waiting for: rugged hardware + high-throughput on-device compute + a real management layer. A next step toward “plug-and-deploy” perception for robots. 🔗 Find out more here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

41,955 Aufrufe • vor 7 Monaten

RICE ROBOTICS TO LAUNCH A CUSTOM FLOKI AI-POWERED ROBOT AND THE $RICE TOKEN AI robotics startup RICE AI ( ◉ - ◉ ) will launch a custom Floki AI-powered companion robot. The AI-powered companion robot, named the FLOKI minibot M1, will be natively integrated with the RICE AI decentralized protocol. It can be your daily task assistant, helping with tasks that include reminding you of your grocery list, scheduling household activities, and searching online for information. It can also be your friend, adapting to your personality and building emotional connections through fun interactions such as telling bed time stories, giving friendship advice, and dancing with your favorite music. In addition, Rice AI will launch the $RICE token as the main utility token of the RICE AI decentralized protocol with support from Floki and TokenFi: - The $RICE token will launch mainly through TokenFi Launchpad, where $TOKEN stakers will be able to participate in the token sale event through TokenFi Launchpad. - FLOKI minibot M1 users will earn $RICE tokens by using and engaging with their Floki minibot M1–transforming everyday interactions into valuable robotics training data. - Floki and TokenFi users will be airdropped a portion of the $RICE token supply simply by holding and staking their tokens. We will be announcing more details about the $RICE token and how $FLOKI and $TOKEN holders can participate soon. Stay tuned for more information! Rice Robotics, the company behind RICE AI, is one of the most promising AI robotics startups, with high-profile clients and partners that include Nvidia, Softbank, Dubai Future Foundation, Mitsui Fudosan, NTT Japan, and 7-Eleven. - Softbank, which leads the $500 billion Stargate initiative recently introduced by President Trump to grow artificial intelligence infrastructure in the United States, is one of Rice Robotics' major customers, with RICE robots powering office delivery at SoftBank Headquarters. - RICE robots provide delivery services at Tokyo Midtown Yaesu for Mitsui Fudosan, one of the largest property developers in Japan. - RICE has integrated with the 7-Now mobile app and its robots are used by 7-Eleven Japan in scaling unmanned indoor delivery in Japan. - Rice Robotics is a partner of the Nvidia Inception Program. Check out what Floki Minibot M1 can do in this video 👇

FLOKI

723,167 Aufrufe • vor 1 Jahr

Do you think you could train a robot to fold clothes better than any other robotics team? Now is your chance to prove it...and win actual cash prizes! The 2026 LeHome Challenge is live! Here is the details: Phase 1: Train your best clothes folding policy in simulation with 4 garment types, each presenting unique manipulation challenges. The types of garments include long-sleeved tops, short-sleeved tops, long pants, and shorts. The simulation environment uses Lightwheel's physics accurate deformable assets and built on NVIDIA Omniverse's Isaac Sim/Lab. Submit your code by April 5th for a chance to win up to $2,000 and a SO-101 Arm Kit. Phase 2: The top 8 teams will compete in person at ICRA on June 4th to see who's policy performs best with real clothes. The top place team will take home $20,000! Learn more and sign up for the LeHome Challenge here: Robert Scoble Chris Paxton The Humanoid Hub Harrison Kinsley #Robotics

Do you think you could train a robot to fold clothes better than any other robotics team? Now is your chance to prove it...and win actual cash prizes! The 2026 LeHome Challenge is live! Here is the details: Phase 1: Train your best clothes folding policy in simulation with 4 garment types, each presenting unique manipulation challenges. The types of garments include long-sleeved tops, short-sleeved tops, long pants, and shorts. The simulation environment uses Lightwheel's physics accurate deformable assets and built on NVIDIA Omniverse's Isaac Sim/Lab. Submit your code by April 5th for a chance to win up to $2,000 and a SO-101 Arm Kit. Phase 2: The top 8 teams will compete in person at ICRA on June 4th to see who's policy performs best with real clothes. The top place team will take home $20,000! Learn more and sign up for the LeHome Challenge here: Robert Scoble Chris Paxton The Humanoid Hub Harrison Kinsley #Robotics

Jonathan Stephens

24,003 Aufrufe • vor 5 Monaten

China’s construction tech is on another level! If you still picture construction sites with tones of workers swinging hammers, you’re officially stuck in the 90s. In China they’re out here building skyscrapers like it’s a speedrun challenge, with a tech stack that would make Silicon Valley jealous. AI-Powered Smart Sites Drones, IoT sensors, and AI are managing construction sites better than some human managers. Real-time safety alerts, automated progress tracking, and even predictive maintenance are standard tools, not fancy bonuses. Green Building Technologies Solar panels built into facades. Rainwater harvesting embedded into skyscrapers. Buildings that regulate their own temperature to save energy, not future dreams, but today’s standards. Robotics in Construction From brick-laying robots to rebar-tying machines, construction crews in China now have mechanical teammates with no lunch breaks, no grumbling. Welcome to Construction 2.0 (China Edition) Humans supervising, robots building! Gone are the days when a construction site meant a hundred+ guys with shovels. In China’s construction sites today, the machines are the real MVPs, humans mostly sip coffee and supervise. Bricklaying Human hands? Please. Robotic arms now lay bricks faster, straighter, and neater than your uncle’s weekend DIY projects. Some can lay 1,000+ bricks an hour and never ask for overtime. Excavation Remember digging trenches with shovels? That’s adorable. Now AI-guided autonomous excavators carve the earth with GPS-level precision while operators chill in air-conditioned control rooms. Concrete Pouring Giant robotic nozzles squeezing out entire building frames like they’re icing a wedding cake. Layers and layers, no sweat, no mess, no “oops, we need to redo that wall.” Welding You think shaky human hands are still melting steel together? Nah. Robot welders buzz and spark with perfect, tireless accuracy, even in places that are too risky for humans to reach. Inspection Sending humans to climb scaffolding 50 stories up? Very 2002. Now drones buzz around construction sites like paparazzi, scanning every beam, bolt, and brick, spotting defects before a human eye would even blink. Material Transport Why carry things manually when you can have self-driving forklifts and delivery bots moving steel, concrete, and pipes faster than an Amazon Prime truck? Site Monitoring Forget some guy in a neon vest wandering around with a clipboard. Today it’s AI-driven command centers tracking thousands of data points: worker safety, machinery health, material delivery schedules all from one giant screen. Project Planning Old: Paper blueprints and arguing architects. New: AI and BIM (Building Information Modeling) simulate the entire building in virtual reality before the first brick is even printed. This video shows how construction sites in China are now using robots to handle tasks like rebar placement, concrete pouring, and polishing, which has led to a 50% reduction in the workforce at some projects. The robots are proving to be more efficient, with one project's furnace robot achieving a 20% efficiency increase in just 5 days, saving 5% on labor costs. The construction company is developing even more advanced robots for future use as they work to improve smart construction technology for widespread real-time application. At China’s next-gen construction sites, humans don’t sweat, they strategize. Machines are not seen as luxury, they are seen as a necessity. Why does it matter? China is using 5G, AI, IoT, and robotics to build entire smart cities. And when the world comes looking for fast, sustainable, and scalable construction models… guess who’s already handing out the blueprints? Next time you hear: ‘Made in China,’ think bigger, it is: ‘Engineered for the future in China.’

China’s construction tech is on another level! If you still picture construction sites with tones of workers swinging hammers, you’re officially stuck in the 90s. In China they’re out here building skyscrapers like it’s a speedrun challenge, with a tech stack that would make Silicon Valley jealous. AI-Powered Smart Sites Drones, IoT sensors, and AI are managing construction sites better than some human managers. Real-time safety alerts, automated progress tracking, and even predictive maintenance are standard tools, not fancy bonuses. Green Building Technologies Solar panels built into facades. Rainwater harvesting embedded into skyscrapers. Buildings that regulate their own temperature to save energy, not future dreams, but today’s standards. Robotics in Construction From brick-laying robots to rebar-tying machines, construction crews in China now have mechanical teammates with no lunch breaks, no grumbling. Welcome to Construction 2.0 (China Edition) Humans supervising, robots building! Gone are the days when a construction site meant a hundred+ guys with shovels. In China’s construction sites today, the machines are the real MVPs, humans mostly sip coffee and supervise. Bricklaying Human hands? Please. Robotic arms now lay bricks faster, straighter, and neater than your uncle’s weekend DIY projects. Some can lay 1,000+ bricks an hour and never ask for overtime. Excavation Remember digging trenches with shovels? That’s adorable. Now AI-guided autonomous excavators carve the earth with GPS-level precision while operators chill in air-conditioned control rooms. Concrete Pouring Giant robotic nozzles squeezing out entire building frames like they’re icing a wedding cake. Layers and layers, no sweat, no mess, no “oops, we need to redo that wall.” Welding You think shaky human hands are still melting steel together? Nah. Robot welders buzz and spark with perfect, tireless accuracy, even in places that are too risky for humans to reach. Inspection Sending humans to climb scaffolding 50 stories up? Very 2002. Now drones buzz around construction sites like paparazzi, scanning every beam, bolt, and brick, spotting defects before a human eye would even blink. Material Transport Why carry things manually when you can have self-driving forklifts and delivery bots moving steel, concrete, and pipes faster than an Amazon Prime truck? Site Monitoring Forget some guy in a neon vest wandering around with a clipboard. Today it’s AI-driven command centers tracking thousands of data points: worker safety, machinery health, material delivery schedules all from one giant screen. Project Planning Old: Paper blueprints and arguing architects. New: AI and BIM (Building Information Modeling) simulate the entire building in virtual reality before the first brick is even printed. This video shows how construction sites in China are now using robots to handle tasks like rebar placement, concrete pouring, and polishing, which has led to a 50% reduction in the workforce at some projects. The robots are proving to be more efficient, with one project's furnace robot achieving a 20% efficiency increase in just 5 days, saving 5% on labor costs. The construction company is developing even more advanced robots for future use as they work to improve smart construction technology for widespread real-time application. At China’s next-gen construction sites, humans don’t sweat, they strategize. Machines are not seen as luxury, they are seen as a necessity. Why does it matter? China is using 5G, AI, IoT, and robotics to build entire smart cities. And when the world comes looking for fast, sustainable, and scalable construction models… guess who’s already handing out the blueprints? Next time you hear: ‘Made in China,’ think bigger, it is: ‘Engineered for the future in China.’

Evrim Kanbur

71,826 Aufrufe • vor 1 Jahr

Robots still fail at the simplest job: picking stuff up. 🫴🏼 Robots are good at repetition, but most still fail at grasping varied objects. In warehouses and grocery fulfillment, that’s the bottleneck: items aren’t uniform, and rigid grippers break or drop them. Nexera-Robotics built NeuraGrasp to address this. The system combines a compliant surface that mimics human fingertips with an AI controller that adjusts grip in real time. It doesn’t need reprogramming for each SKU and can handle fragile, irregular items as well as standard packages. This matters because if grasping is solved, robots stop being limited to narrow workflows. They can finally automate the “last meter” of logistics and retail, where most of the labor costs remain today. It's oddly satisfying to see a gripper that can pick up (almost) anything! 🫶🏼

Robots still fail at the simplest job: picking stuff up. 🫴🏼 Robots are good at repetition, but most still fail at grasping varied objects. In warehouses and grocery fulfillment, that’s the bottleneck: items aren’t uniform, and rigid grippers break or drop them. Nexera-Robotics built NeuraGrasp to address this. The system combines a compliant surface that mimics human fingertips with an AI controller that adjusts grip in real time. It doesn’t need reprogramming for each SKU and can handle fragile, irregular items as well as standard packages. This matters because if grasping is solved, robots stop being limited to narrow workflows. They can finally automate the “last meter” of logistics and retail, where most of the labor costs remain today. It's oddly satisfying to see a gripper that can pick up (almost) anything! 🫶🏼

Lukas Ziegler

24,055 Aufrufe • vor 11 Monaten

☂️ A YouTuber built an umbrella you don’t have to hold — it flies above its owner in the rain A Canadian DIY enthusiast, John Tse, has created a device that follows a person and shields them from rain. Instead of a handle, it uses a drone with a canopy and a tracking system that locks onto the owner. The project began in 2024 as a simple manually controlled version. By January 2026, the creator had upgraded it to autonomous mode, allowing the umbrella to fly on its own without a remote. The device still struggles to keep up with its owner at times, but further improvements are already in the works. Looks like walking in the rain hands-free may soon be possible.

☂️ A YouTuber built an umbrella you don’t have to hold — it flies above its owner in the rain A Canadian DIY enthusiast, John Tse, has created a device that follows a person and shields them from rain. Instead of a handle, it uses a drone with a canopy and a tracking system that locks onto the owner. The project began in 2024 as a simple manually controlled version. By January 2026, the creator had upgraded it to autonomous mode, allowing the umbrella to fly on its own without a remote. The device still struggles to keep up with its owner at times, but further improvements are already in the works. Looks like walking in the rain hands-free may soon be possible.

NEXTA

46,804 Aufrufe • vor 6 Monaten

Baroness Jones of Moulsecoomb, "If we want more houses built we should go after the property developers that are land banking" "They say they'll build 100 houses and then they'll build 5. It's better profit for them to build a few and keep the price up, build another few the next year" "One of the problems of this Labour government is that it's got this mantra that growth is good, but you have to measure growth the right way" "Prosperity is not about making the rich richer" "Prosperity is about fewer people using the NHS, and fewer people being homeless, and fewer kids going to school hungry" "The response to Labour's policy has been enormous. My inbox is full of people. One saying: I've been waiting ten years for an allotment" "And if there a few allotments not being used, I would say its down to the council to encourage residents to use them" "The bigger problem is, councils are cash strapped which is why they are selling off their assets, and that's something Labour should tackle" "Labour is going at this in all the wrong ways"

Baroness Jones of Moulsecoomb, "If we want more houses built we should go after the property developers that are land banking" "They say they'll build 100 houses and then they'll build 5. It's better profit for them to build a few and keep the price up, build another few the next year" "One of the problems of this Labour government is that it's got this mantra that growth is good, but you have to measure growth the right way" "Prosperity is not about making the rich richer" "Prosperity is about fewer people using the NHS, and fewer people being homeless, and fewer kids going to school hungry" "The response to Labour's policy has been enormous. My inbox is full of people. One saying: I've been waiting ten years for an allotment" "And if there a few allotments not being used, I would say its down to the council to encourage residents to use them" "The bigger problem is, councils are cash strapped which is why they are selling off their assets, and that's something Labour should tackle" "Labour is going at this in all the wrong ways"

Farrukh

130,234 Aufrufe • vor 1 Jahr

TerraNova CEO Laurence Allen on how his tank-sized robots quietly lift entire cities out of flood zones without demolishing anything: "Our robots are about the weirdest robots you've heard of. They're the size of a car. They look like a tank. They're basically a giant pump on tracks." "You have this big injection pump, and you park it right next to a well you've drilled to 30 to 60 feet. That pump is fed by a big lay-flat hose that runs from a parking lot 1,000 feet away with a slurry of wood." "What you get is you can very rapidly provide a ton of volume underground. You use that volume to lift land at acre scale, city scale. It's the first way you can lift land from the subsurface." "It's very similar to what you'd see with autonomous excavator robots, except you're lifting all the infrastructure and everything currently in place, instead of demolishing it, filling it, and rebuilding it." Laurence Allen

TerraNova CEO Laurence Allen on how his tank-sized robots quietly lift entire cities out of flood zones without demolishing anything: "Our robots are about the weirdest robots you've heard of. They're the size of a car. They look like a tank. They're basically a giant pump on tracks." "You have this big injection pump, and you park it right next to a well you've drilled to 30 to 60 feet. That pump is fed by a big lay-flat hose that runs from a parking lot 1,000 feet away with a slurry of wood." "What you get is you can very rapidly provide a ton of volume underground. You use that volume to lift land at acre scale, city scale. It's the first way you can lift land from the subsurface." "It's very similar to what you'd see with autonomous excavator robots, except you're lifting all the infrastructure and everything currently in place, instead of demolishing it, filling it, and rebuilding it." Laurence Allen

MTS

17,356 Aufrufe • vor 17 Tagen

JENSEN HUANG TOLD STANFORD THAT CLOUD AI WILL NEED 1,000 TIMES MORE ENERGY. THE $249 BOX HE BUILT FOR YOUR DESK USES 25 WATTS AND REPLACES A $200/MONTH AI STACK someone posted a 26 year old imac in airplane mode running a modern ai model with no internet. 1.7 million views in 24 hours. the same thing runs on a $249 box from nvidia the jetson orin nano super pulls 7-25 watts and does 67 trillion ai operations per second. llama 3, mistral and deepseek run locally with no api fees and no data leaving your machine most developers pay $2,400 a year across chatgpt, openai api, claude pro and cursor. the jetson costs $314 in year one and $60 a year after. 2 year savings hit $4,431 install ollama with one command, change one line of code to point at localhost, and every tool built for openai works identically. zero rewrites, zero rate limits cloud subscriptions keep getting more expensive and rate limits keep getting tighter. the people who own the box in 2026 are going to look very far ahead in 2028 bookmark this and read the article below

JENSEN HUANG TOLD STANFORD THAT CLOUD AI WILL NEED 1,000 TIMES MORE ENERGY. THE $249 BOX HE BUILT FOR YOUR DESK USES 25 WATTS AND REPLACES A $200/MONTH AI STACK someone posted a 26 year old imac in airplane mode running a modern ai model with no internet. 1.7 million views in 24 hours. the same thing runs on a $249 box from nvidia the jetson orin nano super pulls 7-25 watts and does 67 trillion ai operations per second. llama 3, mistral and deepseek run locally with no api fees and no data leaving your machine most developers pay $2,400 a year across chatgpt, openai api, claude pro and cursor. the jetson costs $314 in year one and $60 a year after. 2 year savings hit $4,431 install ollama with one command, change one line of code to point at localhost, and every tool built for openai works identically. zero rewrites, zero rate limits cloud subscriptions keep getting more expensive and rate limits keep getting tighter. the people who own the box in 2026 are going to look very far ahead in 2028 bookmark this and read the article below

starmex

15,822 Aufrufe • vor 2 Monaten