Video wird geladen...

Video konnte nicht geladen werden

Zur Startseite

Great power demands precise control! ⚡️ The Composite Nozzle and Flex Nozzle Control System of Vikram-1's Stage 1 (Kalam-1200) just aced their pre-flight tests. ✅ This "steering system" to thrust vector the rocket is now ready for integration with the motor for the upcoming static fire test. 🔥 #rocketscience #space

SkyrootA's profile picture

Skyroot Aerospace

118,800 subscribers

21,757 Aufrufe • vor 1 Jahr •via X (Twitter)

BildungWissenschaft & Technologie
LIVE

Anya Rossi• Live Now

Private livecam show

12 Kommentare

Profilbild von Gareeb Scientist
Gareeb Scientistvor 1 Jahr

Ohh looks like we nrsing stage 1 static fire, nice nice

Profilbild von UNPLUGGED PERFORMANCE
UNPLUGGED PERFORMANCEvor 2 Jahren

Every aspect of the UP-05 is designed to take your Tesla to new heights. Shop now from $3,595 per set.

Profilbild von SRI SAIDATTA
SRI SAIDATTAvor 1 Jahr

🔥 S1 test fire soon ?

Profilbild von Anshuman (TitaniumSV5)
Anshuman (TitaniumSV5)vor 1 Jahr

Lessssss go!

Profilbild von Twin Turbo
Twin Turbovor 1 Jahr

Hype for s1 static fire📈

Profilbild von Arnav Singh
Arnav Singhvor 1 Jahr

On the way...🚀🚀🚀

Profilbild von Pramochan Yaan
Pramochan Yaanvor 1 Jahr

@FrontlinerUV 🔥 🚀

Profilbild von pranav13
pranav13vor 1 Jahr

Repeat mode

Profilbild von Global News 🚨|| Current Affairs🌐
Global News 🚨|| Current Affairs🌐vor 1 Jahr

Congrats

Profilbild von PulsPay
PulsPayvor 1 Jahr

🔥

Profilbild von Beyond Sun
Beyond Sunvor 1 Jahr

when you launch the vikram-1 , pleaseeeee try to stream the launch like spacex and rocketlab. Don't do it like isro. My humble request.

Profilbild von interstellar travel.
interstellar travel.vor 1 Jahr

So nice! A little worried about the jittering transmission leads.

Ähnliche Videos

🔥 Skyroot's Vikram-1 Mission Milestone: Kalam-100 Static Fire Test A Success! 🚀 The third stage of our Vikram-1 launch vehicle, Kalam-100 roared to life for over 102-seconds – equipped with an advanced flex nozzle for precise thrust vector control. The latest test builds on the success of the previous fixed-nozzle static fire test. Kalam-100 generates a peak vacuum thrust of 100kN at an operating area ratio of 60 in flight. This is a success engineered by many – people and computers: * Our passionate teams at Skyroot * In-house developed Automatic Launch Computer and a suite of Vikram-1 flight avionics, including our Mission Computer, to emulate flight conditions and test as we fly * Cutting-edge sensors to capture 150+ data channels * And invaluable partners at Solar Group who provided both casting and test bed support One giant leap toward orbit!
2:17

🔥 Skyroot's Vikram-1 Mission Milestone: Kalam-100 Static Fire Test A Success! 🚀 The third stage of our Vikram-1 launch vehicle, Kalam-100 roared to life for over 102-seconds – equipped with an advanced flex nozzle for precise thrust vector control. The latest test builds on the success of the previous fixed-nozzle static fire test. Kalam-100 generates a peak vacuum thrust of 100kN at an operating area ratio of 60 in flight. This is a success engineered by many – people and computers: * Our passionate teams at Skyroot * In-house developed Automatic Launch Computer and a suite of Vikram-1 flight avionics, including our Mission Computer, to emulate flight conditions and test as we fly * Cutting-edge sensors to capture 150+ data channels * And invaluable partners at Solar Group who provided both casting and test bed support One giant leap toward orbit!

Skyroot Aerospace

27,985 Aufrufe • vor 1 Jahr

Solar Defence and Aerospace Limited (SDAL), a Solar Group company, successfully developed and test-fired the third stage Rocket Motor with flex nozzle-based Thrust Vector Control for the VIKRAM-1 Satellite Launch Vehicle. With 2400 kg propellant mass and 75,000 N thrust, the motor passed all quality checks and was fired at SDAL’s in-house test facility. This marks a major milestone in SDAL’s growing role in India’s space and defence ecosystem.
0:34

Solar Defence and Aerospace Limited (SDAL), a Solar Group company, successfully developed and test-fired the third stage Rocket Motor with flex nozzle-based Thrust Vector Control for the VIKRAM-1 Satellite Launch Vehicle. With 2400 kg propellant mass and 75,000 N thrust, the motor passed all quality checks and was fired at SDAL’s in-house test facility. This marks a major milestone in SDAL’s growing role in India’s space and defence ecosystem.

Alpha Defense™🇮🇳

33,416 Aufrufe • vor 1 Jahr

Before Vikram-1 could leave for Sriharikota, every major system had to qualify on the ground. This episode goes inside that campaign — the Kalam-1200 static fire, stage separation, payload fairing jettison, full OAM qualification, and more. Test after test, Vikram-1 passed. #JourneyToOrbit #Vikram1
5:55

Before Vikram-1 could leave for Sriharikota, every major system had to qualify on the ground. This episode goes inside that campaign — the Kalam-1200 static fire, stage separation, payload fairing jettison, full OAM qualification, and more. Test after test, Vikram-1 passed. #JourneyToOrbit #Vikram1

Skyroot Aerospace

48,082 Aufrufe • vor 9 Tagen

The Stage 2, Kalam-250, has arrived at Sriharikota for pre-flight checks and integration ahead of Vikram-1's maiden flight.⠀⠀ ⠀⠀ #Vikram1 #SkyrootAerospace ⠀
0:51

The Stage 2, Kalam-250, has arrived at Sriharikota for pre-flight checks and integration ahead of Vikram-1's maiden flight.⠀⠀ ⠀⠀ #Vikram1 #SkyrootAerospace ⠀

Skyroot Aerospace

18,608 Aufrufe • vor 5 Monaten

🚨 BREAKING NEWS 🇮🇳 ISRO confirms SUCCESSFUL static test of Skyroot Aerospace’s KALAM-1200 solid rocket motor — the first stage of Vikram-1 — at SDSC, Sriharikota on Aug 8, 2025 🚀 — This brings India’s 1st private orbital launch CLOSER than ever.
1:59

🚨 BREAKING NEWS 🇮🇳 ISRO confirms SUCCESSFUL static test of Skyroot Aerospace’s KALAM-1200 solid rocket motor — the first stage of Vikram-1 — at SDSC, Sriharikota on Aug 8, 2025 🚀 — This brings India’s 1st private orbital launch CLOSER than ever.

Megh Updates 🚨™

58,825 Aufrufe • vor 11 Monaten

Roscosmos shows full-duration static fire of the RD-0124MS engine for the second stage of Soyuz-5/Sunkar rocket. The first flight-worthy RD-0124MS engine was delivered and installed on the second stage last year. With that, the engine is now ready for flight tests.
6:29

Roscosmos shows full-duration static fire of the RD-0124MS engine for the second stage of Soyuz-5/Sunkar rocket. The first flight-worthy RD-0124MS engine was delivered and installed on the second stage last year. With that, the engine is now ready for flight tests.

afec7032 🇷🇺

20,833 Aufrufe • vor 6 Monaten

The third stage of Vikram-1 has reached spaceport. 🚛🚀 With this all three stages moved to pre-flight checks and integration. #Vikram1 #SkyrootAerospace
1:03

The third stage of Vikram-1 has reached spaceport. 🚛🚀 With this all three stages moved to pre-flight checks and integration. #Vikram1 #SkyrootAerospace

Skyroot Aerospace

12,939 Aufrufe • vor 4 Monaten

How to Seal the Deal in Rocket Engineering 🚀 Before our Kalam-1200 rocket stage can unleash its full, fiery thrust, it starts off sealed shut. This special cap — called a nozzle closure — locks in the gases to build just the right chamber pressure to initiate uniform and stable combustion. Then, in a split-second precision, it’s blasted away, clearing the path for the booster to roar to life. 🔥 Watch the breathtaking moment of closure ejection in 1500 fps and see how our team sealed the deal to fire India's largest private rocket stage!
0:28

How to Seal the Deal in Rocket Engineering 🚀 Before our Kalam-1200 rocket stage can unleash its full, fiery thrust, it starts off sealed shut. This special cap — called a nozzle closure — locks in the gases to build just the right chamber pressure to initiate uniform and stable combustion. Then, in a split-second precision, it’s blasted away, clearing the path for the booster to roar to life. 🔥 Watch the breathtaking moment of closure ejection in 1500 fps and see how our team sealed the deal to fire India's largest private rocket stage!

Skyroot Aerospace

39,662 Aufrufe • vor 11 Monaten

Archimedes second stage engine full duration burn - complete ✅ (and what a thing of beauty). The AVac (Archimedes Vacuum) engine produces 1.2x lbf of its Stage 1 variant and stands ~2.5m taller thanks to its extended nozzle optimized for the vacuum conditions of space. Recent AVac testing included a stub skirt for the nozzle. Since full length vacuum nozzles at ground level risk flow separation and instability, stub skirts are used to anchor our engineers' analysis for how the engine will perform with the full nozzle in vacuum conditions - all critical preparation for Neutron's first flight.
5:40

Archimedes second stage engine full duration burn - complete ✅ (and what a thing of beauty). The AVac (Archimedes Vacuum) engine produces 1.2x lbf of its Stage 1 variant and stands ~2.5m taller thanks to its extended nozzle optimized for the vacuum conditions of space. Recent AVac testing included a stub skirt for the nozzle. Since full length vacuum nozzles at ground level risk flow separation and instability, stub skirts are used to anchor our engineers' analysis for how the engine will perform with the full nozzle in vacuum conditions - all critical preparation for Neutron's first flight.

Rocket Lab

413,690 Aufrufe • vor 1 Tag

This is the story of building Vikram-1 and the preparations for its maiden flight. Every system built, every test run, every major decision until the final countdown at the launchpad, documented. #SkyrootAerospace #Vikram1 #JourneyToOrbit
1:13

This is the story of building Vikram-1 and the preparations for its maiden flight. Every system built, every test run, every major decision until the final countdown at the launchpad, documented. #SkyrootAerospace #Vikram1 #JourneyToOrbit

Skyroot Aerospace

21,700 Aufrufe • vor 1 Monat

i-Space recently completed a hot fire test of Hyperbola-3's Second Stage Auxiliary Power System. It features a bi-propellant design with 16 thrusters to handle everything from attitude control to orbit trimming and propellant management for engine restarts to deorbit passivation
1:28

i-Space recently completed a hot fire test of Hyperbola-3's Second Stage Auxiliary Power System. It features a bi-propellant design with 16 thrusters to handle everything from attitude control to orbit trimming and propellant management for engine restarts to deorbit passivation

China 'N Asia Spaceflight 🚀𝕏 🛰️

59,999 Aufrufe • vor 7 Monaten

🔥 Vikram-1's retro motors successfully completed the developmental tests! The smallest solid motors on the vehicle they're vital for clean separation of Stage 1. Six firings confirm they are hitting all target thrust and differential delay specs for a smooth jettison. 🚀
0:57

🔥 Vikram-1's retro motors successfully completed the developmental tests! The smallest solid motors on the vehicle they're vital for clean separation of Stage 1. Six firings confirm they are hitting all target thrust and differential delay specs for a smooth jettison. 🚀

Skyroot Aerospace

21,930 Aufrufe • vor 1 Jahr

Taking mini to the max! 🚀 Raman Mini thrusters for Vikram-1 came out all chambers blazing during the flight qualification. With the performance now proven, these 50N thrusters are ready to be integrated into the vehicle’s Orbital Adjustment Module, and provide pitch/yaw control during flight. 🔥
0:49

Taking mini to the max! 🚀 Raman Mini thrusters for Vikram-1 came out all chambers blazing during the flight qualification. With the performance now proven, these 50N thrusters are ready to be integrated into the vehicle’s Orbital Adjustment Module, and provide pitch/yaw control during flight. 🔥

Skyroot Aerospace

20,061 Aufrufe • vor 1 Jahr

Almost no one talks about height control. This clip shows why it matters. A capacitive sensor on the cutting head keeps the nozzle only fractions of a millimeter above the metal sheet, even when the sheet is warped or vibrating. That tiny distance is everything for a clean cut. The setup here: ✅ Kimla laser system ✅ Precitec cutting head ✅ Capacitive sensing for real-time height control ✅ Stable gap over uneven or bent sheets If the nozzle drifts even slightly, you lose cut quality, speed, and consistency. This is the part of laser systems that most people never think about, but it is what makes the difference between “it works” and “this is production ready.” Have you ever had to keep the nozzle as close as possible without risking a crash? Credit: Daltons Wadkin —- Weekly robotics and AI insights. Subscribe free:
0:20

Almost no one talks about height control. This clip shows why it matters. A capacitive sensor on the cutting head keeps the nozzle only fractions of a millimeter above the metal sheet, even when the sheet is warped or vibrating. That tiny distance is everything for a clean cut. The setup here: ✅ Kimla laser system ✅ Precitec cutting head ✅ Capacitive sensing for real-time height control ✅ Stable gap over uneven or bent sheets If the nozzle drifts even slightly, you lose cut quality, speed, and consistency. This is the part of laser systems that most people never think about, but it is what makes the difference between “it works” and “this is production ready.” Have you ever had to keep the nozzle as close as possible without risking a crash? Credit: Daltons Wadkin —- Weekly robotics and AI insights. Subscribe free:

Ilir Aliu

224,579 Aufrufe • vor 7 Monaten

Alpha Flight 7's first stage shipped out from our Rocket Ranch in Texas and arrived safely at Vandenberg Space Force Base! Up next, we'll integrate the two stages in preparation for a static fire test ahead of launch in the coming weeks. Stay tuned for more.
0:41

Alpha Flight 7's first stage shipped out from our Rocket Ranch in Texas and arrived safely at Vandenberg Space Force Base! Up next, we'll integrate the two stages in preparation for a static fire test ahead of launch in the coming weeks. Stay tuned for more.

Firefly Aerospace

52,049 Aufrufe • vor 6 Monaten

🇷🇺 Russia’s Yakovlev makes another fully domestic passenger plane, a Yakovlev MC-21. These planes were developed with many Russian parts pre 2022, but now Yak reworked the model and swapped everything for Russian parts. The aircraft had its imported components and systems replaced with Russian ones. The procedure of swapping every part of a plane for domestic components is extremely complex, as this has not been done before. Usually you iterate on a plane part by part, not doing such a big bang change. This procedure includes replacement of the cockpit controls, control system drives, wing mechanization movement system and stabilizer adjustment mechanism, avionics complex, integrated air conditioning system, integrated system for collecting, monitoring, processing, and recording flight information, wheel braking system, main and auxiliary power units, fuel system, wheels, tires, and more. The plant workers, together with specialists from the flight test and refinement complex of PJSC "Yakovlev," are checking the fuel system, start-up and operation of the auxiliary power unit and main engines, as well as testing of the aircraft's systems and equipment with the engines running. Frequency tests of the landing gear systems and integrated control system were also carried out on the aircraft. 1/
0:54

🇷🇺 Russia’s Yakovlev makes another fully domestic passenger plane, a Yakovlev MC-21. These planes were developed with many Russian parts pre 2022, but now Yak reworked the model and swapped everything for Russian parts. The aircraft had its imported components and systems replaced with Russian ones. The procedure of swapping every part of a plane for domestic components is extremely complex, as this has not been done before. Usually you iterate on a plane part by part, not doing such a big bang change. This procedure includes replacement of the cockpit controls, control system drives, wing mechanization movement system and stabilizer adjustment mechanism, avionics complex, integrated air conditioning system, integrated system for collecting, monitoring, processing, and recording flight information, wheel braking system, main and auxiliary power units, fuel system, wheels, tires, and more. The plant workers, together with specialists from the flight test and refinement complex of PJSC "Yakovlev," are checking the fuel system, start-up and operation of the auxiliary power unit and main engines, as well as testing of the aircraft's systems and equipment with the engines running. Frequency tests of the landing gear systems and integrated control system were also carried out on the aircraft. 1/

Lord Bebo

161,686 Aufrufe • vor 9 Monaten

When Vikram-1 reaches space, the payload fairing needs to split apart and fall away cleanly, protecting the satellite on the way up, then getting out of the way when its job is done. The final pre-flight separation test on flight hardware confirms the pneumatic separation system is a stable, proven design. Next stop: Sriharikota. 🚀 #Vikram1 #SkyrootAerospace #SpaceTech
0:27

When Vikram-1 reaches space, the payload fairing needs to split apart and fall away cleanly, protecting the satellite on the way up, then getting out of the way when its job is done. The final pre-flight separation test on flight hardware confirms the pneumatic separation system is a stable, proven design. Next stop: Sriharikota. 🚀 #Vikram1 #SkyrootAerospace #SpaceTech

Skyroot Aerospace

42,433 Aufrufe • vor 3 Monaten

Terran R Build Progress – The past 2 months have been packed with rapid advancements across design, manufacturing, and testing. From welded barrels to hot fires, checkout some of the highlights on the path to first flight. 🚀 In Long Beach: Completed the first circumferential friction stir weld for flight hardware, joining the stage 2 common dome to the stage 2 LOX barrel. 🔥 Over at Stennis Space Center hot fire testing continues with thrust vector control (TVC) motion up to 5.5 degrees, the maximum range of the stand! 🏗️ At LC-16 in Cape Canaveral, Florida, the first steel columns for Terran R’s horizontal integration facility were erected. 👉
3:24

Terran R Build Progress – The past 2 months have been packed with rapid advancements across design, manufacturing, and testing. From welded barrels to hot fires, checkout some of the highlights on the path to first flight. 🚀 In Long Beach: Completed the first circumferential friction stir weld for flight hardware, joining the stage 2 common dome to the stage 2 LOX barrel. 🔥 Over at Stennis Space Center hot fire testing continues with thrust vector control (TVC) motion up to 5.5 degrees, the maximum range of the stand! 🏗️ At LC-16 in Cape Canaveral, Florida, the first steel columns for Terran R’s horizontal integration facility were erected. 👉

Relativity Space

60,464 Aufrufe • vor 1 Jahr