Video wird geladen...

Video konnte nicht geladen werden

Beim Laden dieses Videos ist ein Problem aufgetreten. Dies könnte an einem vorübergehenden Netzwerkproblem liegen oder das Video ist möglicherweise nicht verfügbar.

install these before your next long Claude Code session if your Opus 5.5 bill hurts and you don’t know where to start, copy this: claude-code-router: sits in front of Claude Code and sends each request to the cheapest model that can do it. Haiku does the grep, Opus only... gets the hard part. 37k stars rtk: shrinks test, build and git output before the model sees it. one binary, up to 90% less bash output in your context. 83k stars claude-mem: remembers what happened in your past sessions and feeds back only the relevant part, so you stop paying to re-explain your project every morning. 100k stars context-mode: a huge tool output goes into a local database instead of your context window, and Claude pulls out only the lines it needs. 18k stars caveman: makes Claude answer in short telegraphic sentences. code stays identical, and output is the expensive side on Opus 5.5 ($20 per million). 51k stars token-optimizer: a local dashboard that shows where your tokens actually went, and keeps your work alive across compactions. 1.9k stars token-savior: replaces whole-file reads with symbol lookups, so Claude reads the function and not the 2,000 lines around it code-review-graph: maps your repo as a graph and gives Claude only the code connected to the change you’re reviewing jev-ultrafast: a browser agent where Jev picks every click, and a text model wakes up only when something has to be typed. 16,758 stars none of them makes Opus smarter. every one stops it from paying for work it never needed to do the full setup with scripts is in the article. do the measuring step first, so you know what you actually savedshow more

rvaniaaa

3,911 subscribers

17,873 Aufrufe • vor 20 Stunden •via X (Twitter)

Bildung Wissenschaft & Technologie

Anya Rossi• Live Now

Private livecam show

12 Kommentare

Profilbild von Yarchi

Yarchivor 20 Stunden

these repos are so good, nice list

Profilbild von rvaniaaa

rvaniaaavor 20 Stunden

Appreciate it

Profilbild von 安叫兽|Bird🕊️ 🔶 BNB

安叫兽|Bird🕊️ 🔶 BNBvor 18 Stunden

杂活分给小模型没毛病，难的是别把难题也分过去了

Profilbild von Patrick

Patrickvor 12 Stunden

Same logic as rake: send volume to cheap tables, save the big buy-ins.

Profilbild von Corbenic · Galahad (beta)

Corbenic · Galahad (beta)vor 17 Stunden

Good list. Sending small tasks to a cheaper model is an easy win. Prompt caching also helps a lot in long sessions, the same prefix comes back every turn.

Profilbild von Noam Naumovsky

Noam Naumovskyvor 19 Stunden

I run rtk and context-mode together and they help, but watch the overlap: two tools both rewriting bash output can fight over the same call. Measure each one alone first. Which pair gave you the biggest drop without stepping on each other?

Profilbild von Henrique

Henriquevor 15 Stunden

👀

Profilbild von Thomas

Thomasvor 20 Stunden

whole lot of setup just to save a few bucks. we had it sorted before with basic checks and balances. figure that

Profilbild von 𝓔𝓼𝓶𝓮𝔂𝓲🌸

𝓔𝓼𝓶𝓮𝔂𝓲🌸vor 18 Stunden

Facts! 💅🏻

Profilbild von Timothy

Timothyvor 12 Stunden

Same math as match play conversion. Always route to cheapest edge first. - Dimes

Profilbild von AGTP

AGTPvor 16 Stunden

Managing that context and cost is exactly why people are moving to Opus 5.5:

Profilbild von Abdul Builds

Abdul Buildsvor 20 Stunden

worth checking your cache hit rate before and after. each routed call sends the whole context to a model that has none of it cached, so on a long session the cheap call can cost close to a cached opus turn. routing pays most on short, fresh requests.

Ähnliche Videos

If you're hitting Claude Code's context limit, check your terminal output before blaming your project size. Every command Claude runs dumps raw output into your context window. git status : 76% of it is noise. A failed cargo test : 155 lines becomes 3. A grep across your codebase : same story You're not running out of context because your code is too big. You're running out because the commands are bleeding you dry before you get anywhere. RTK intercepts that output, compresses it, and hands Claude a clean version instead. 60–90% fewer tokens. Same information. Runs in the background after a one-command setup. Real numbers from 2,900+ commands: average 89% compression across the board. MIT license. Free. 39k GitHub stars. rtk init -g That's it. Restart Claude Code and every command is compressed automatically.

If you're hitting Claude Code's context limit, check your terminal output before blaming your project size. Every command Claude runs dumps raw output into your context window. git status : 76% of it is noise. A failed cargo test : 155 lines becomes 3. A grep across your codebase : same story You're not running out of context because your code is too big. You're running out because the commands are bleeding you dry before you get anywhere. RTK intercepts that output, compresses it, and hands Claude a clean version instead. 60–90% fewer tokens. Same information. Runs in the background after a one-command setup. Real numbers from 2,900+ commands: average 89% compression across the board. MIT license. Free. 39k GitHub stars. rtk init -g That's it. Restart Claude Code and every command is compressed automatically.

Charlie Hills

16,692 Aufrufe • vor 5 Monaten

$THIS MIGHT BE THE #1 OPEN-SOURCE REPO FOR CLAUDE CODE RIGHT NOW. IT GIVES CLAUDE A MEMORY AND SLASHES YOUR TOKEN COST ON EVERY QUESTION The repo is safishamsi/graphify, a free open-source skill that turns any codebase into a knowledge graph Claude Code can read instantly. Instead of grepping through your files every session, Claude gets a map of how everything connects The problem it fixes: Every time you ask Claude Code about a big repo, it does the same thing, greps through dozens of files like a brute-force Ctrl+F, blows through your context window, and sometimes still misses the answer hiding in a file nobody searched. Claude Code has no memory of how your project is structured. Every session starts from zero What it does: It maps your entire codebase into a knowledge graph, capturing not just which files exist, but which functions depend on which, which modules are central, and which files cluster around the same concern. Claude queries the map instead of scanning files How it works, three passes: 1. Code structure, free and local. Tree-sitter parses your files and pulls out classes, functions, imports and call graphs. No LLM, no tokens, just your actual code mapped deterministically 2. Audio and video, if you have them. Transcribed locally and folded into the graph 3. Docs, papers, images. Here an LLM does semantic analysis, figuring out what each document means and where it fits. Only the meaning gets sent up, never your raw source It saves you money: Normally a question about a big repo makes Claude spawn explore agents that scan file after file, eating your context window and your token budget before you get an answer. With the graph already built, Claude queries the map instead of re-reading the codebase every time. Same answer, a fraction of the tokens. The graph only gets built once, then a hook rebuilds it after each commit for free, so you never pay that scanning cost again. The bigger the repo, the bigger the gap The best parts: it's a skill, so once installed Claude knows when to use it without you memorizing commands. It works on non-code folders too, point it at docs or notes and it can spin up an Obsidian vault How to add it to your Claude: 1. Install Claude Code if you haven't: npm install -g Paul Jankura-ai/claude-code 2. Add the skill: claude skill add safishamsi/graphify 3. Open your project folder and run /graphify . to build the graph 4. Optional, make it automatic: graphify hook install so the graph rebuilds after every commit That's it. Ask Claude about your repo and it reads the map instead of burning tokens on a file hunt Bookmark this$

THIS MIGHT BE THE #1 OPEN-SOURCE REPO FOR CLAUDE CODE RIGHT NOW. IT GIVES CLAUDE A MEMORY AND SLASHES YOUR TOKEN COST ON EVERY QUESTION The repo is safishamsi/graphify, a free open-source skill that turns any codebase into a knowledge graph Claude Code can read instantly. Instead of grepping through your files every session, Claude gets a map of how everything connects The problem it fixes: Every time you ask Claude Code about a big repo, it does the same thing, greps through dozens of files like a brute-force Ctrl+F, blows through your context window, and sometimes still misses the answer hiding in a file nobody searched. Claude Code has no memory of how your project is structured. Every session starts from zero What it does: It maps your entire codebase into a knowledge graph, capturing not just which files exist, but which functions depend on which, which modules are central, and which files cluster around the same concern. Claude queries the map instead of scanning files How it works, three passes: 1. Code structure, free and local. Tree-sitter parses your files and pulls out classes, functions, imports and call graphs. No LLM, no tokens, just your actual code mapped deterministically 2. Audio and video, if you have them. Transcribed locally and folded into the graph 3. Docs, papers, images. Here an LLM does semantic analysis, figuring out what each document means and where it fits. Only the meaning gets sent up, never your raw source It saves you money: Normally a question about a big repo makes Claude spawn explore agents that scan file after file, eating your context window and your token budget before you get an answer. With the graph already built, Claude queries the map instead of re-reading the codebase every time. Same answer, a fraction of the tokens. The graph only gets built once, then a hook rebuilds it after each commit for free, so you never pay that scanning cost again. The bigger the repo, the bigger the gap The best parts: it's a skill, so once installed Claude knows when to use it without you memorizing commands. It works on non-code folders too, point it at docs or notes and it can spin up an Obsidian vault How to add it to your Claude: 1. Install Claude Code if you haven't: npm install -g Paul Jankura-ai/claude-code 2. Add the skill: claude skill add safishamsi/graphify 3. Open your project folder and run /graphify . to build the graph 4. Optional, make it automatic: graphify hook install so the graph rebuilds after every commit That's it. Ask Claude about your repo and it reads the map instead of burning tokens on a file hunt Bookmark this

Yarchi

56,568 Aufrufe • vor 4 Monaten

THIS IS PURE F*CKING GOLD Anthropic just shared one of the best tricks for Claude Code. The idea: run Sonnet, Haiku and Opus 5.5 at the same time, each one doing only what it's best at. Better results and way fewer tokens, because every task lands on the right model. You just start Claude Code like this: claude --model sonnet --advisor opus here's how it splits: → Sonnet 5 runs the session and writes the code → Haiku 5.5 explores files and docs in parallel → Opus 5.5 stays on call as advisor for the big decisions → you stop burning Opus context on tasks that don't need it Opus only steps in at three moments: → before a plan locks → when the same error hits twice → before calling it done Sonnet builds. Haiku explores. Opus reviews. JEV engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to JEV in milliseconds, and the big models only see the ones that split the full tree > Sonnet 5 runs the main session and edits code > search maps the repo on Haiku 5.5 > grep finds call sites on Haiku 5.5 > docs pulls the API reference on Haiku 5.5 > Opus 5.5 on call as advisor, reads the full transcript when consulted > JEV routes micro-forks in milliseconds paste the tree and this prompt into Claude Code ↓ "Reconfigure my Claude Code setup around this tree: 1. Run the main session on Sonnet 5 with Opus 5.5 as advisor. 2. Create three read-only Haiku 5.5 subagents: search (maps the repo), grep (finds call sites), docs (pulls the API reference). 3. Add one rule to CLAUDE.md: consult the advisor before locking a plan, after the same error twice, and before calling a task done. 4. Route fast deterministic forks (tool choice, path selection, retries) through JEV. Show me every change as a diff first. No edits until I say go." ↳ save it, it'll come in handy.

THIS IS PURE F*CKING GOLD Anthropic just shared one of the best tricks for Claude Code. The idea: run Sonnet, Haiku and Opus 5.5 at the same time, each one doing only what it's best at. Better results and way fewer tokens, because every task lands on the right model. You just start Claude Code like this: claude --model sonnet --advisor opus here's how it splits: → Sonnet 5 runs the session and writes the code → Haiku 5.5 explores files and docs in parallel → Opus 5.5 stays on call as advisor for the big decisions → you stop burning Opus context on tasks that don't need it Opus only steps in at three moments: → before a plan locks → when the same error hits twice → before calling it done Sonnet builds. Haiku explores. Opus reviews. JEV engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to JEV in milliseconds, and the big models only see the ones that split the full tree > Sonnet 5 runs the main session and edits code > search maps the repo on Haiku 5.5 > grep finds call sites on Haiku 5.5 > docs pulls the API reference on Haiku 5.5 > Opus 5.5 on call as advisor, reads the full transcript when consulted > JEV routes micro-forks in milliseconds paste the tree and this prompt into Claude Code ↓ "Reconfigure my Claude Code setup around this tree: 1. Run the main session on Sonnet 5 with Opus 5.5 as advisor. 2. Create three read-only Haiku 5.5 subagents: search (maps the repo), grep (finds call sites), docs (pulls the API reference). 3. Add one rule to CLAUDE.md: consult the advisor before locking a plan, after the same error twice, and before calling a task done. 4. Route fast deterministic forks (tool choice, path selection, retries) through JEV. Show me every change as a diff first. No edits until I say go." ↳ save it, it'll come in handy.

delost

300,852 Aufrufe • vor 2 Tagen

Boris Cherny gave Claude Code a memory that has no database, no indexing, no setup, and 80% of Anthropic runs on it a CLAUDE.md "gets automatically read into context at the start of every session" 12:48 - CLAUDE.md loads into memory every session 13:15 - Keep memory short or it burns your context 15:48 - Memory stacks from you to your whole company 17:30 - The memory command shows what Claude remembers 19:33 - Hit pound and Claude remembers it forever the whole memory layer is files → drop a CLAUDE.md in your repo and Claude reads it in on every session → nest more in subfolders and it pulls them only where it works → stack them personal to project to enterprise so one config serves the whole team → hit the pound key mid task and Claude writes the new fact into memory itself the best coding agent's memory was never a database, it was markdown you can open and edit

Boris Cherny gave Claude Code a memory that has no database, no indexing, no setup, and 80% of Anthropic runs on it a CLAUDE.md "gets automatically read into context at the start of every session" 12:48 - CLAUDE.md loads into memory every session 13:15 - Keep memory short or it burns your context 15:48 - Memory stacks from you to your whole company 17:30 - The memory command shows what Claude remembers 19:33 - Hit pound and Claude remembers it forever the whole memory layer is files → drop a CLAUDE.md in your repo and Claude reads it in on every session → nest more in subfolders and it pulls them only where it works → stack them personal to project to enterprise so one config serves the whole team → hit the pound key mid task and Claude writes the new fact into memory itself the best coding agent's memory was never a database, it was markdown you can open and edit

NO1ennn

13,015 Aufrufe • vor 2 Monaten

this is pure f*cking treasure Anthropic devs just posted 20 GitHub repos that turn your Claude Code into a f*cking engineering team: Exposed for Opus 5.5 1. rtk: squeezes command output before it hits your context. the authors claim 60-90% fewer tokens 2. claude-mem: memory across sessions. records what the agent did and brings back what matters 3. ccusage: shows where your tokens and money went. one command, npx ccusage 4. Serena: search and edit code by meaning, not by text 5. Context7: up-to-date library docs, so Claude stops writing for last year's API 6. claude-context: your whole codebase searchable through MCP 7. Repomix: packs an entire repo into one AI-friendly file skills and method 8. superpowers: a skills framework and a full development methodology. the one almost everyone installs 9. skills: the official Agent Skills repo from Anthropic 10. spec-kit: spec-driven development, from GitHub itself 11. agents: a plugin marketplace for Claude Code and six other harnesses 12. claude-code-templates: ready configs and monitoring from one CLI 13. claude-code-hooks-mastery: hooks explained with working examples 14. awesome-claude-code: the hand-picked map of everything else running more than one agent 15. container-use: a separate container for every agent, so they stop breaking each other 16. claude-squad: several terminal agents in one window 17. Happy: control your agents from your phone, iOS and Android 18. claude-code-router: route requests across different models 19. ccstatusline: a status line that shows what your session is doing 20. tweakcc: edit Claude Code's own system prompts, toolsets and themes the stack in one line: memory keeps the context, skills set the method, containers let you run five agents instead of one. check each repo before you install. save this.

this is pure fcking treasure Anthropic devs just posted 20 GitHub repos that turn your Claude Code into a fcking engineering team: Exposed for Opus 5.5 1. rtk: squeezes command output before it hits your context. the authors claim 60-90% fewer tokens 2. claude-mem: memory across sessions. records what the agent did and brings back what matters 3. ccusage: shows where your tokens and money went. one command, npx ccusage 4. Serena: search and edit code by meaning, not by text 5. Context7: up-to-date library docs, so Claude stops writing for last year's API 6. claude-context: your whole codebase searchable through MCP 7. Repomix: packs an entire repo into one AI-friendly file skills and method 8. superpowers: a skills framework and a full development methodology. the one almost everyone installs 9. skills: the official Agent Skills repo from Anthropic 10. spec-kit: spec-driven development, from GitHub itself 11. agents: a plugin marketplace for Claude Code and six other harnesses 12. claude-code-templates: ready configs and monitoring from one CLI 13. claude-code-hooks-mastery: hooks explained with working examples 14. awesome-claude-code: the hand-picked map of everything else running more than one agent 15. container-use: a separate container for every agent, so they stop breaking each other 16. claude-squad: several terminal agents in one window 17. Happy: control your agents from your phone, iOS and Android 18. claude-code-router: route requests across different models 19. ccstatusline: a status line that shows what your session is doing 20. tweakcc: edit Claude Code's own system prompts, toolsets and themes the stack in one line: memory keeps the context, skills set the method, containers let you run five agents instead of one. check each repo before you install. save this.

kiosa

55,680 Aufrufe • vor 5 Tagen

This workflow will save you thousands with Claude. Run Opus 5.5, Sonnet 5.5, Haiku 5.5, and Fable 5.1 together, and stop spending Opus tokens on work that doesn't need Opus. The entire idea in one line: Opus plans, Sonnet edits, Haiku reads, Fable reviews at decision points. Roles, broken down: - Opus 5.5, high effort, owns the plan and reviews the final code - Sonnet 5.5, medium effort, is the worker: edits files, runs tests - Haiku 5.5, low effort, splits into explorer (searches and reads the codebase) and researcher (pulls docs). it's the first Haiku with an effort setting - Fable 5.1, set with /advisor fable. Opus calls it at decision points, and it gets the full transcript each time Three moments Opus tends to call it: → before committing to a plan: is this the right approach? → the same error shows up again: is this going nowhere? → before marking the task done: did something get skipped? Why Haiku only reads: Anthropic's launch post says Sonnet 5.5 and Opus 5.5 are still the better choice for complex agentic coding (Terminal-Bench 4.0: 39.2% for Haiku 5.5, 70.6% for Sonnet 5.5) and that Haiku 5.5 fits narrowly scoped subagent work. so it gets the lookups, not the edits. Anyone still running one model for everything is paying $4 per million input tokens to check whether a file exists. Haiku 5.5 does it for $0.10. Drop this into Claude Code 👇 "Rebuild my Claude Code setup around this structure: Confirm Claude Code is v2.1.293 or later, so the haiku alias resolves to Haiku 5.5. If it isn't, stop and tell me to run claude update. Look through ~/.claude/agents and .claude/agents for subagents already covering explorer, worker, and researcher. Only create new ones for roles that are missing. Set model: haiku, effort: low on explorer and researcher, with no Edit or Write tools. Set model: sonnet, effort: medium on worker. If an existing subagent is locked to a different model, leave it as is and just list it. Name the explorer subagent Explore so it overrides the built-in one, which otherwise runs on my main model. In ~/.claude/settings.json, set advisorModel to fable, and set effortLevel to high for claude-opus-5-5 under modelSettings. A top-level effortLevel in user settings doesn't apply to Opus 5.5. Check for anything disabling the advisor: CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, or anything blocking feature-flag fetches. Also check CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort settings, and CLAUDE_CODE_SUBAGENT_MODEL_FORCE, which makes Claude Code ignore subagent model fields. Report what you find. Don't change any of it yet. Add one line to ~/.claude/CLAUDE.md: consult the advisor before a big plan, when the same error shows up twice, and before marking a long task done. Show every change as a diff first. Wait for my go-ahead before touching anything."

This workflow will save you thousands with Claude. Run Opus 5.5, Sonnet 5.5, Haiku 5.5, and Fable 5.1 together, and stop spending Opus tokens on work that doesn't need Opus. The entire idea in one line: Opus plans, Sonnet edits, Haiku reads, Fable reviews at decision points. Roles, broken down: - Opus 5.5, high effort, owns the plan and reviews the final code - Sonnet 5.5, medium effort, is the worker: edits files, runs tests - Haiku 5.5, low effort, splits into explorer (searches and reads the codebase) and researcher (pulls docs). it's the first Haiku with an effort setting - Fable 5.1, set with /advisor fable. Opus calls it at decision points, and it gets the full transcript each time Three moments Opus tends to call it: → before committing to a plan: is this the right approach? → the same error shows up again: is this going nowhere? → before marking the task done: did something get skipped? Why Haiku only reads: Anthropic's launch post says Sonnet 5.5 and Opus 5.5 are still the better choice for complex agentic coding (Terminal-Bench 4.0: 39.2% for Haiku 5.5, 70.6% for Sonnet 5.5) and that Haiku 5.5 fits narrowly scoped subagent work. so it gets the lookups, not the edits. Anyone still running one model for everything is paying $4 per million input tokens to check whether a file exists. Haiku 5.5 does it for $0.10. Drop this into Claude Code 👇 "Rebuild my Claude Code setup around this structure: Confirm Claude Code is v2.1.293 or later, so the haiku alias resolves to Haiku 5.5. If it isn't, stop and tell me to run claude update. Look through ~/.claude/agents and .claude/agents for subagents already covering explorer, worker, and researcher. Only create new ones for roles that are missing. Set model: haiku, effort: low on explorer and researcher, with no Edit or Write tools. Set model: sonnet, effort: medium on worker. If an existing subagent is locked to a different model, leave it as is and just list it. Name the explorer subagent Explore so it overrides the built-in one, which otherwise runs on my main model. In ~/.claude/settings.json, set advisorModel to fable, and set effortLevel to high for claude-opus-5-5 under modelSettings. A top-level effortLevel in user settings doesn't apply to Opus 5.5. Check for anything disabling the advisor: CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, or anything blocking feature-flag fetches. Also check CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort settings, and CLAUDE_CODE_SUBAGENT_MODEL_FORCE, which makes Claude Code ignore subagent model fields. Report what you find. Don't change any of it yet. Add one line to ~/.claude/CLAUDE.md: consult the advisor before a big plan, when the same error shows up twice, and before marking a long task done. Show every change as a diff first. Wait for my go-ahead before touching anything."

Alvaro Cintas

55,249 Aufrufe • vor 6 Tagen

Claude Code tip: once Opus 5.5 is your main model, stop leaving Fable 5.1 sitting idle put it on call with /advisor run /advisor fable Opus 5.5 keeps writing the code Fable 5.1 reads the full session, every tool call included, and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Fable 5.1 reviews. Opus 5.5 ships Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big model only sees the ones that split - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on medium > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: opus, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

Claude Code tip: once Opus 5.5 is your main model, stop leaving Fable 5.1 sitting idle put it on call with /advisor run /advisor fable Opus 5.5 keeps writing the code Fable 5.1 reads the full session, every tool call included, and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Fable 5.1 reviews. Opus 5.5 ships Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big model only sees the ones that split - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on medium > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: opus, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

delost

698,269 Aufrufe • vor 15 Tagen

Claude Code tip: once Opus 5.5 runs your main session, stop leaving Fable 5.1 on the bench put it on call with /advisor run /advisor fable Opus 5.5 keeps writing the code Fable 5.1 reads the whole session, every tool call included, and only speaks up at three moments: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Fable 5.1 reviews. Opus 5.5 ships jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to jev in under half a second, and the big model only sees the ones that split - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on medium > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: opus, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

Claude Code tip: once Opus 5.5 runs your main session, stop leaving Fable 5.1 on the bench put it on call with /advisor run /advisor fable Opus 5.5 keeps writing the code Fable 5.1 reads the whole session, every tool call included, and only speaks up at three moments: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Fable 5.1 reviews. Opus 5.5 ships jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to jev in under half a second, and the big model only sees the ones that split - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on medium > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: opus, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

Hanako

52,065 Aufrufe • vor 13 Tagen

I just found a way to use Claude Code completely free. Claude Code is Anthropic’s terminal coding agent that usually needs a paid API key to run. But a viral GitHub project called Free Claude Code, now sitting at 37k stars, lets you skip the billing entirely. It works as a tiny proxy that sits between Claude Code and free model providers like NVIDIA NIM, OpenRouter, DeepSeek, and Gemini. Every request Claude Code would send to Anthropic gets quietly rerouted to a free model on the other side. The interface stays the same. What’s actually thinking behind it changes. Setup takes a couple of quick commands and a free API key from NVIDIA NIM or OpenRouter. Paste it into the local dashboard, pick a model, and you’re building. The catch is you’re not really using Claude anymore. But when the code ships, does the model badge matter? -- I have shared the Github Link in my free Whatsapp Community ↓

I just found a way to use Claude Code completely free. Claude Code is Anthropic’s terminal coding agent that usually needs a paid API key to run. But a viral GitHub project called Free Claude Code, now sitting at 37k stars, lets you skip the billing entirely. It works as a tiny proxy that sits between Claude Code and free model providers like NVIDIA NIM, OpenRouter, DeepSeek, and Gemini. Every request Claude Code would send to Anthropic gets quietly rerouted to a free model on the other side. The interface stays the same. What’s actually thinking behind it changes. Setup takes a couple of quick commands and a free API key from NVIDIA NIM or OpenRouter. Paste it into the local dashboard, pick a model, and you’re building. The catch is you’re not really using Claude anymore. But when the code ships, does the model badge matter? -- I have shared the Github Link in my free Whatsapp Community ↓

Vaibhav Sisinty

37,255 Aufrufe • vor 3 Monaten

There's a built-in agent inside Claude Code you can invoke just by telling Claude to use the claude-code-guide agent Save this... you'll need it It's not a local file in your project. It's a built-in subagent defined in Claude Code's system itself. It answers questions about Claude Code CLI, the Agent SDK, and the Claude API. It uses Glob, Grep, Read, WebFetch, and WebSearch, but can't edit or write files. Its only job is to answer questions.

There's a built-in agent inside Claude Code you can invoke just by telling Claude to use the claude-code-guide agent Save this... you'll need it It's not a local file in your project. It's a built-in subagent defined in Claude Code's system itself. It answers questions about Claude Code CLI, the Agent SDK, and the Claude API. It uses Glob, Grep, Read, WebFetch, and WebSearch, but can't edit or write files. Its only job is to answer questions.

Daniel San

57,445 Aufrufe • vor 7 Monaten

someone just rebuilt claude code in pure python and made it 230x cheaper to run it's called clawcodex. a full from-scratch port of the claude code agent loop. 230k+ lines of python, MIT licensed it keeps your request prefix byte-stable, so DeepSeek's prompt cache covers your entire system + tools + history on every turn cache-hit input then bills at ~$0.0435 per 1M tokens the same 1M tokens on Claude Fable 5 runs you $10 so the longer you code, the more the cache pays off what you actually get: → 25 LLM providers (Claude, GPT, DeepSeek, GLM, local ollama) → 1M token context window → real agent loop: tools, skills, REPL, session history → one-line install, mac/linux/wsl and it's sitting at 860 stars. basically nobody is looking yet bookmark this before it gone

someone just rebuilt claude code in pure python and made it 230x cheaper to run it's called clawcodex. a full from-scratch port of the claude code agent loop. 230k+ lines of python, MIT licensed it keeps your request prefix byte-stable, so DeepSeek's prompt cache covers your entire system + tools + history on every turn cache-hit input then bills at ~$0.0435 per 1M tokens the same 1M tokens on Claude Fable 5 runs you $10 so the longer you code, the more the cache pays off what you actually get: → 25 LLM providers (Claude, GPT, DeepSeek, GLM, local ollama) → 1M token context window → real agent loop: tools, skills, REPL, session history → one-line install, mac/linux/wsl and it's sitting at 860 stars. basically nobody is looking yet bookmark this before it gone

alex

14,212 Aufrufe • vor 1 Monat

someone just rebuilt claude code in pure python and made it ~230x cheaper to run it's called clawcodex. a full from-scratch port of the claude code agent loop. 230k+ lines of python, MIT licensed it keeps your request prefix byte-stable, so DeepSeek's prompt cache covers your entire system + tools + history on every turn cache-hit input then bills at ~$0.0435 per 1M tokens the same 1M tokens on Claude Fable 5 runs you $10 so the longer you code, the more the cache pays off what you actually get: → 25 LLM providers (Claude, GPT, DeepSeek, GLM, local ollama) → 1M token context window → real agent loop: tools, skills, REPL, session history → one-line install, mac/linux/wsl and it's sitting at 677 stars. basically nobody is looking yet bookmark this before it gone

someone just rebuilt claude code in pure python and made it ~230x cheaper to run it's called clawcodex. a full from-scratch port of the claude code agent loop. 230k+ lines of python, MIT licensed it keeps your request prefix byte-stable, so DeepSeek's prompt cache covers your entire system + tools + history on every turn cache-hit input then bills at ~$0.0435 per 1M tokens the same 1M tokens on Claude Fable 5 runs you $10 so the longer you code, the more the cache pays off what you actually get: → 25 LLM providers (Claude, GPT, DeepSeek, GLM, local ollama) → 1M token context window → real agent loop: tools, skills, REPL, session history → one-line install, mac/linux/wsl and it's sitting at 677 stars. basically nobody is looking yet bookmark this before it gone

Argona

51,369 Aufrufe • vor 3 Monaten

Your Claude has a tell, and almost nobody uses it. Make it start every reply with your name. One line in custom instructions, no code. The moment it stops saying your name, its context window is full. That is the exact point the output starts drifting, and you do not notice. Name stops? Start a fresh chat. It has killed about 90% of my “why has Claude gone weird” moments. Miners sent a canary down the pit to catch the gas they could not see. Same trick, for your context. Comment GUIDE and I’ll send you the exact canary setup.

Your Claude has a tell, and almost nobody uses it. Make it start every reply with your name. One line in custom instructions, no code. The moment it stops saying your name, its context window is full. That is the exact point the output starts drifting, and you do not notice. Name stops? Start a fresh chat. It has killed about 90% of my “why has Claude gone weird” moments. Miners sent a canary down the pit to catch the gas they could not see. Same trick, for your context. Comment GUIDE and I’ll send you the exact canary setup.

Charlie Hills

24,185 Aufrufe • vor 3 Monaten

Cat Wu, head of product for Claude Code at Anthropic: "you can build almost anything with Claude from a single prompt now" one prompt gets you a working screen, not YOUR product Claude Code has never seen your design system, so it guesses the look fresh every time. how to hand Claude Code that system is in the article. better than the $300 design course in your tabs, and this one's free.

Cat Wu, head of product for Claude Code at Anthropic: "you can build almost anything with Claude from a single prompt now" one prompt gets you a working screen, not YOUR product Claude Code has never seen your design system, so it guesses the look fresh every time. how to hand Claude Code that system is in the article. better than the $300 design course in your tabs, and this one's free.

Mnimiy

114,229 Aufrufe • vor 4 Monaten

someone just rebuilt claude code in pure python and made it 230x cheaper to run it's called clawcodex. a full from-scratch port of the claude code agent loop. 230k+ lines of python, MIT licensed it keeps your request prefix byte-stable, so DeepSeek's prompt cache covers your entire system + tools + history on every turn cache-hit input then bills at ~$0.0435 per 1M tokens the same 1M tokens on Claude Fable 5 runs you $10 so the longer you code, the more the cache pays off what you actually get: → 25 LLM providers (Claude, GPT, DeepSeek, GLM, local ollama) → 1M token context window → real agent loop: tools, skills, REPL, session history → one-line install, mac/linux/wsl and it's sitting at 677 stars. basically nobody is looking yet bookmark this before it gone

someone just rebuilt claude code in pure python and made it 230x cheaper to run it's called clawcodex. a full from-scratch port of the claude code agent loop. 230k+ lines of python, MIT licensed it keeps your request prefix byte-stable, so DeepSeek's prompt cache covers your entire system + tools + history on every turn cache-hit input then bills at ~$0.0435 per 1M tokens the same 1M tokens on Claude Fable 5 runs you $10 so the longer you code, the more the cache pays off what you actually get: → 25 LLM providers (Claude, GPT, DeepSeek, GLM, local ollama) → 1M token context window → real agent loop: tools, skills, REPL, session history → one-line install, mac/linux/wsl and it's sitting at 677 stars. basically nobody is looking yet bookmark this before it gone

alex

158,896 Aufrufe • vor 2 Monaten

Introducing Jev Skill Suggestion for Claude Code Now you can keep your skills completely out of the context window until they’re actually needed Set your skills as user invocable only, and the Mod sends the available skill list to Jev For every request, Jev classifies which skill best matches the task, then injects only that skill into Claude’s context Works with both the TypeSafe AI API and Vercel AI Gateway Install it with one command: npx claude-code-templates@latest --mod productivity/jev-skill-suggestion Full implementation details on the Mod page at

Introducing Jev Skill Suggestion for Claude Code Now you can keep your skills completely out of the context window until they’re actually needed Set your skills as user invocable only, and the Mod sends the available skill list to Jev For every request, Jev classifies which skill best matches the task, then injects only that skill into Claude’s context Works with both the TypeSafe AI API and Vercel AI Gateway Install it with one command: npx claude-code-templates@latest --mod productivity/jev-skill-suggestion Full implementation details on the Mod page at

Daniel San

81,168 Aufrufe • vor 23 Tagen

Claude Code tip: once Opus 5.5 is your main model, stop leaving Fable 5.1 sitting idle and stop burning Opus tokens on tasks Sonnet 5.5 can swarm put it on call with /advisor run /advisor fable Opus 5.5 plans and ships the code Sonnet 5.5 swarms the routine work at medium effort Fable 5.1 reads the full session, every tool call included, and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Fable 5.1 reviews. Sonnet 5.5 executes. Opus 5.5 ships Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big model only sees the ones that split Plan on high. Delegate on medium. Keep Fable on call. - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on Sonnet 5.5 at medium effort > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: sonnet, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

Claude Code tip: once Opus 5.5 is your main model, stop leaving Fable 5.1 sitting idle and stop burning Opus tokens on tasks Sonnet 5.5 can swarm put it on call with /advisor run /advisor fable Opus 5.5 plans and ships the code Sonnet 5.5 swarms the routine work at medium effort Fable 5.1 reads the full session, every tool call included, and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Fable 5.1 reviews. Sonnet 5.5 executes. Opus 5.5 ships Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big model only sees the ones that split Plan on high. Delegate on medium. Keep Fable on call. - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on Sonnet 5.5 at medium effort > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: sonnet, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

mirku

421,711 Aufrufe • vor 14 Tagen

Anthropic just gave OpenClaw the green light Anthropic staff confirmed that CLI-based usage is sanctioned. We’ve successfully bridged the Claude Code CLI directly into the OpenClaw gateway, letting you run your entire agent fleet on your Pro/Max plan and no additional API tokens required. The Implementation: - Auth: Log in to Claude Code locally: claude auth login - Path: Grab your binary location: which claude - Bridge: Drop the path into your openclaw.json under agents.defaults: "cliBackends": { "claude-cli": { "args": [ "-p", "--output-format", "json" ], "command": " ", "input": "arg", "output": "json", "serialize": true, "sessionArg": "--session-id", "sessionMode": "existing" } }, "model": { "primary": "claude-cli/claude-opus-4-6" }, "models": { "claude-cli/claude-opus-4-6": {}, "claude-cli/claude-opus-4-7": {}, "claude-cli/claude-sonnet-4-6": {} }, The Result: OpenClaw reuses your local session IDs and subscription limits. You get the full power of Opus and Sonnet without the restricted OAuth endpoints or the API tax. They sanctioned the path. We built the bridge. Here is a video how I done it step by step:

Anthropic just gave OpenClaw the green light Anthropic staff confirmed that CLI-based usage is sanctioned. We’ve successfully bridged the Claude Code CLI directly into the OpenClaw gateway, letting you run your entire agent fleet on your Pro/Max plan and no additional API tokens required. The Implementation: - Auth: Log in to Claude Code locally: claude auth login - Path: Grab your binary location: which claude - Bridge: Drop the path into your openclaw.json under agents.defaults: "cliBackends": { "claude-cli": { "args": [ "-p", "--output-format", "json" ], "command": " ", "input": "arg", "output": "json", "serialize": true, "sessionArg": "--session-id", "sessionMode": "existing" } }, "model": { "primary": "claude-cli/claude-opus-4-6" }, "models": { "claude-cli/claude-opus-4-6": {}, "claude-cli/claude-opus-4-7": {}, "claude-cli/claude-sonnet-4-6": {} }, The Result: OpenClaw reuses your local session IDs and subscription limits. You get the full power of Opus and Sonnet without the restricted OAuth endpoints or the API tax. They sanctioned the path. We built the bridge. Here is a video how I done it step by step:

Ziwen

184,291 Aufrufe • vor 5 Monaten

This is f*cking insane. This Claude Code tip saved me thousands of dollars. once Opus 5.5 is your main model, stop burning it on work Sonnet 5.5 can do, while Fable 5.1 sits idle hand the grunt work to Sonnet 5.5 subagents and put Fable 5.1 on call run /advisor fable Opus 5.5 plans and ships the final code Sonnet 5.5 subagents read, edit and run the tests Fable 5.1 reads the full session, every tool call included, and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Sonnet 5.5 builds. Fable 5.1 reviews. Opus 5.5 ships Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big models only see the ones that split anyone still running one model for everything is paying Opus prices to decide whether a file exists - the full tree > Opus 5.5 on high runs the main session > explorer reads the code on Sonnet 5.5 > worker edits and runs tests on Sonnet 5.5 > researcher pulls the docs on Sonnet 5.5 > all three on medium > Fable 5.1 on call for main and every subagent paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: sonnet, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

This is f*cking insane. This Claude Code tip saved me thousands of dollars. once Opus 5.5 is your main model, stop burning it on work Sonnet 5.5 can do, while Fable 5.1 sits idle hand the grunt work to Sonnet 5.5 subagents and put Fable 5.1 on call run /advisor fable Opus 5.5 plans and ships the final code Sonnet 5.5 subagents read, edit and run the tests Fable 5.1 reads the full session, every tool call included, and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Sonnet 5.5 builds. Fable 5.1 reviews. Opus 5.5 ships Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big models only see the ones that split anyone still running one model for everything is paying Opus prices to decide whether a file exists - the full tree > Opus 5.5 on high runs the main session > explorer reads the code on Sonnet 5.5 > worker edits and runs tests on Sonnet 5.5 > researcher pulls the docs on Sonnet 5.5 > all three on medium > Fable 5.1 on call for main and every subagent paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: sonnet, effort: medium > Skip any that pin a different model and list them 2. Set the main session to high via effortLevel in ~/.claude/settings.json, and set advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

delost

48,494 Aufrufe • vor 10 Tagen

Claude Code tip: keep Opus 5.5 as your main model, but stop paying Opus prices for your subagents move them to Sonnet 5.5 Opus 5.5 plans and decides Sonnet 5.5 subagents do the heavy reading, editing and testing at half the price ($2 / $10 vs $4 / $20 per 1M tokens) Fable 5.1 stays on call with /advisor and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Opus thinks. Sonnet does. Fable checks Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big models only see the ones that split - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on Sonnet 5.5, medium > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: claude-sonnet-5-5, effort: medium > List any that pin a different model before changing them 2. Keep the main session on Opus, set effortLevel to high in ~/.claude/settings.json and advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

Claude Code tip: keep Opus 5.5 as your main model, but stop paying Opus prices for your subagents move them to Sonnet 5.5 Opus 5.5 plans and decides Sonnet 5.5 subagents do the heavy reading, editing and testing at half the price ($2 / $10 vs $4 / $20 per 1M tokens) Fable 5.1 stays on call with /advisor and only speaks up at three points: → before a plan: is this the right approach? → when the same error comes back: am I digging in the wrong place? → before "done": what did I miss? Opus thinks. Sonnet does. Fable checks Jev engineering is the same move one layer down: the forks that need no thinker (which file, which tool, retry or stop) go to Jev in under half a second, and the big models only see the ones that split - the full tree > Opus 5.5 on high runs the main session > explorer reads the code > worker edits and runs tests > researcher pulls the docs > all three on Sonnet 5.5, medium > Fable 5.1 on call as the advisor paste the tree and this prompt into Claude Code ↓ "Rebuild my Claude Code setup around this tree: 1. Check ~/.claude/agents and .claude/agents for subagents that already fit explorer, worker and researcher. > Draft new ones only for missing roles > Give each model: claude-sonnet-5-5, effort: medium > List any that pin a different model before changing them 2. Keep the main session on Opus, set effortLevel to high in ~/.claude/settings.json and advisorModel to fable 3. Find anything that keeps the advisor off (CLAUDE_CODE_DISABLE_ADVISOR_TOOL, DISABLE_TELEMETRY, any variable that stops feature-flag fetching) plus CLAUDE_CODE_EFFORT_LEVEL, which overrides subagent effort. Report them, change nothing 4. Add one rule to ~/.claude/CLAUDE.md: consult the advisor before a large plan, when an error repeats, and before calling a long task done Show me every change as a diff first. No edits until I say go." ↳

delost

27,459 Aufrufe • vor 12 Tagen