Video yükleniyor...

Video Yüklenemedi

Bu video yüklenirken bir sorun oluştu. Bu geçici bir ağ sorunundan kaynaklanıyor olabilir veya video kullanılamıyor olabilir.

Ana Sayfaya Dön

Robotic endoscopy in action! Mounted over the scope, the robot has an arm that is controlled externally, with the ability to rotate, flex and grasp tissue. This enables countertraction to assist with complex resection of neoplastic GI lesions.

Keith Siau

215,677 subscribers

32,563 görüntüleme • 3 ay önce •via X (Twitter)

Anya Rossi• Live Now

Private livecam show

0 Yorum

Yorum bulunmuyor

Orijinal gönderinin yorumları burada görünecek

Benzer Videolar

This robodog aims to remove humans from hazardous work environments The Robot Teleoperativo 2 project out of the Dynamic Legged Systems lab has developed an advanced teleoperation system designed to operate in high-risk environments, minimizing dangers to human workers. By integrating cutting-edge technologies in tele-locomotion, tele-manipulation, and remote human-robot interaction, the system enables precise, dual-arm control for complex tasks in hazardous conditions.

This robodog aims to remove humans from hazardous work environments The Robot Teleoperativo 2 project out of the Dynamic Legged Systems lab has developed an advanced teleoperation system designed to operate in high-risk environments, minimizing dangers to human workers. By integrating cutting-edge technologies in tele-locomotion, tele-manipulation, and remote human-robot interaction, the system enables precise, dual-arm control for complex tasks in hazardous conditions.

Circuit

22,831 görüntüleme • 1 yıl önce

Ukrainian manufacturer of ground robotic systems NUMO at an exhibition in Paris demonstrates to visitors the remote control of a robotic platform, which is physically located 2,500 km away at a training ground in western Ukraine. The robot is controlled via Starlink and works from anywhere in the world. Visitors are allowed to try to control a real NRC directly from the Paris stand with minimal delay.

Ukrainian manufacturer of ground robotic systems NUMO at an exhibition in Paris demonstrates to visitors the remote control of a robotic platform, which is physically located 2,500 km away at a training ground in western Ukraine. The robot is controlled via Starlink and works from anywhere in the world. Visitors are allowed to try to control a real NRC directly from the Paris stand with minimal delay.

Devana 🇺🇦

11,545 görüntüleme • 2 ay önce

This poop-looking robot could one day perform tasks inside the human body. The robot is made of magnetic slime that can be controlled by external magnets to move, rotate, and form shapes. #gigadgets #medical #robootics #slime #research

This poop-looking robot could one day perform tasks inside the human body. The robot is made of magnetic slime that can be controlled by external magnets to move, rotate, and form shapes. #gigadgets #medical #robootics #slime #research

GiGadgets

54,883 görüntüleme • 3 yıl önce

The world’s first robot phone is here—and it’s made in China. It’s not just a phone. It has a robotic arm that moves, follows, and interacts with the user. It can even offer hairstyle advice. Hi,GBA

The world’s first robot phone is here—and it’s made in China. It’s not just a phone. It has a robotic arm that moves, follows, and interacts with the user. It can even offer hairstyle advice. Hi,GBA

Mao Ning 毛宁

23,372 görüntüleme • 6 ay önce

Picking up laundry with a 3D printed robot arm and LeRobot. It operates using SO-ARM101 arm mounted on a mobile base, relying on just a wrist and base camera. The base is controlled with an Xbox controller by a human operator. The arm is fully autonomous thanks to the ACT model. The robot can generalize to previously unseen environments. The technical stack: - Model: Action Chunking Transformer (ACT) with Temporal Ensemble - Data: Learned via teleoperation including negative examples and failure recoveries - Framework: Built and trained locally using LeRobot on a single consumer GPU in 3.5h This is a perfect example that real-world robotics isn't about perfect lab conditions - it's about messy living rooms, confusing shadows, and learning to recover from mistakes. And with open tools, anyone can tackle these edge cases right from their desk.

Picking up laundry with a 3D printed robot arm and LeRobot. It operates using SO-ARM101 arm mounted on a mobile base, relying on just a wrist and base camera. The base is controlled with an Xbox controller by a human operator. The arm is fully autonomous thanks to the ACT model. The robot can generalize to previously unseen environments. The technical stack: - Model: Action Chunking Transformer (ACT) with Temporal Ensemble - Data: Learned via teleoperation including negative examples and failure recoveries - Framework: Built and trained locally using LeRobot on a single consumer GPU in 3.5h This is a perfect example that real-world robotics isn't about perfect lab conditions - it's about messy living rooms, confusing shadows, and learning to recover from mistakes. And with open tools, anyone can tackle these edge cases right from their desk.

LeRobot

68,814 görüntüleme • 1 ay önce

NEWS: Tesla has built an automated cleaning robot into its Austin Robotaxi Hub, a state permit shows Texas permit TABS2025022006 lists a cleaning robot directly in its scope of work. It sits alongside Supercharger cabinets and an equipment inspection system. The hub finished construction in March. The permit is now closed. Tesla teased this system in early 2025. It is a robotic arm with swappable attachments that vacuums seats and floors, wipes the touchscreen and even grabs items riders leave behind. This solves a real robotaxi problem. A driverless fleet has no driver to clean the car between rides. The cleaning robot is one piece of a fully automated hub. Cars return, get inspected, recharge and get cleaned without a person involved. The car drives itself. Now the hub cleans itself.

NEWS: Tesla has built an automated cleaning robot into its Austin Robotaxi Hub, a state permit shows Texas permit TABS2025022006 lists a cleaning robot directly in its scope of work. It sits alongside Supercharger cabinets and an equipment inspection system. The hub finished construction in March. The permit is now closed. Tesla teased this system in early 2025. It is a robotic arm with swappable attachments that vacuums seats and floors, wipes the touchscreen and even grabs items riders leave behind. This solves a real robotaxi problem. A driverless fleet has no driver to clean the car between rides. The cleaning robot is one piece of a fully automated hub. Cars return, get inspected, recharge and get cleaned without a person involved. The car drives itself. Now the hub cleans itself.

Muskonomy

91,464 görüntüleme • 2 ay önce

ISRO has successfully demonstrated the use of their RRM-TD Walking Robotic Arm!! 🦾 This makes ISRO the 5th space agency to operate a robotic arm in space! 🇮🇳 RRM-TD was launched on PSLV-C60 as one of the non-separating payloads on board POEM-4. It can be considered as an ancestor of the type of robotic arms that will be used on the Bharatiya Antariksh Station! The success of this demonstration validates their technology and will allow ISRO to move forward with the development of more advanced versions of this for use on BAS. Video of the demonstration 👇

ISRO has successfully demonstrated the use of their RRM-TD Walking Robotic Arm!! 🦾 This makes ISRO the 5th space agency to operate a robotic arm in space! 🇮🇳 RRM-TD was launched on PSLV-C60 as one of the non-separating payloads on board POEM-4. It can be considered as an ancestor of the type of robotic arms that will be used on the Bharatiya Antariksh Station! The success of this demonstration validates their technology and will allow ISRO to move forward with the development of more advanced versions of this for use on BAS. Video of the demonstration 👇

ISRO Spaceflight

14,136 görüntüleme • 1 yıl önce

#WATCH | Bhubaneswar | On eastern India's first ever Robotic Knee Replacement surgery completed in Odisha, Associate Professor in Department of Orthopaedics in AIIMS Bhubaneswar, Dr Gurudip Das says, "Yesterday we did the first robotic knee replacement in Eastern India. It is one of the first government hospitals in India where robotics has been used to perform the procedure... This is quite convenient for the surgeries that are easy, but with complex cases or with deformities, we are concerned with the level of success rate... I am thankful to the government of India, the Prime Minister and our Executive Director... The patient was a 66-year-old lady that came to us with severely deformed knee and we performed this surgery with robot. The patient is doing well... This is the first government institution in Odisha and probably the first in India to have this gadget... When we do this surgery manually, it takes around 30-60 minutes, but with robotic equipment, it took us few minutes extra because it takes time to get the exact precision. When we get acquainted with the device, we will be able to perform this faster... It is like driving a car that takes time to get acquainted with the entire system..."

#WATCH | Bhubaneswar | On eastern India's first ever Robotic Knee Replacement surgery completed in Odisha, Associate Professor in Department of Orthopaedics in AIIMS Bhubaneswar, Dr Gurudip Das says, "Yesterday we did the first robotic knee replacement in Eastern India. It is one of the first government hospitals in India where robotics has been used to perform the procedure... This is quite convenient for the surgeries that are easy, but with complex cases or with deformities, we are concerned with the level of success rate... I am thankful to the government of India, the Prime Minister and our Executive Director... The patient was a 66-year-old lady that came to us with severely deformed knee and we performed this surgery with robot. The patient is doing well... This is the first government institution in Odisha and probably the first in India to have this gadget... When we do this surgery manually, it takes around 30-60 minutes, but with robotic equipment, it took us few minutes extra because it takes time to get the exact precision. When we get acquainted with the device, we will be able to perform this faster... It is like driving a car that takes time to get acquainted with the entire system..."

ANI

23,031 görüntüleme • 1 yıl önce

‼️BREAKING: Prosecution Shows Rifle Photos In Tyler Robinson Hearing — But There’s A Major Problem 👀 In Tyler Robinson’s preliminary hearing, prosecutors just showed photos of the rifle they claim was used to assassinate Charlie Kirk. They displayed: The exact location where the gun was allegedly found The rifle wrapped in a towel (how they say it was discovered) The same rifle out of the towel and in a box Here’s the critical issue: This is a sporterized Mauser .30-06 with a low-mounted scope. If the rifle still has its original military-style wing safety, it would be nearly impossible to operate with that scope mounted. The safety wing would have to flip up and over the bolt — directly into the scope. For this rifle to actually fire with the current scope setup, it would need an aftermarket low-profile safety that clears the optic. So the question is simple: Looking at these photos the prosecution just presented… does this rifle still have the original military wing safety, or has it been modified with a low-profile aftermarket safety? If it still has the original safety, this gun — as configured — could not have been fired with that scope in place. This is a major problem for the prosecution’s case. Watch the clip and look closely at the safety on the rifle. What do you see? More on this coming. Follow for the technical breakdowns they’re not addressing in court. CC: Candace Owens Baron Coleman

Project Constitution

730,569 görüntüleme • 2 ay önce

3/ Robot use - 🥇1st place Combining Claude computer use with a robot arm and have the LLM perform real world actions Amazon robot controlled just by uploading the instruction manual to Claude

3/ Robot use - 🥇1st place Combining Claude computer use with a robot arm and have the LLM perform real world actions Amazon robot controlled just by uploading the instruction manual to Claude

Alex Reibman 🖇️

60,741 görüntüleme • 1 yıl önce

Zoom magnification use in endoscopy or ESD & POEM can be a game changer! enhancing visualization of submucosal vessels, defining perforating vessels from their origin to mucosal termination, and improving plane recognition during dissection. Combining this with low-force coagulation may allow effective vessel coagulation with less charring, reduced need for coagulation graspers, and better preservation of tissue planes and anatomy. Precision visualization with low forced controlled energy delivery can make dissection safer and more efficient. #ESD #POEM #Endoscopy #AdvancedEndoscopy ASGE GI Endoscopy ACG

Zoom magnification use in endoscopy or ESD & POEM can be a game changer! enhancing visualization of submucosal vessels, defining perforating vessels from their origin to mucosal termination, and improving plane recognition during dissection. Combining this with low-force coagulation may allow effective vessel coagulation with less charring, reduced need for coagulation graspers, and better preservation of tissue planes and anatomy. Precision visualization with low forced controlled energy delivery can make dissection safer and more efficient. #ESD #POEM #Endoscopy #AdvancedEndoscopy ASGE GI Endoscopy ACG

Sherif Andrawes MD

15,452 görüntüleme • 4 ay önce

❗️The 🇺🇦Ukrainian company Temerland is preparing to test an upgraded ground robotic platform "Gnom" ("Gnome"), equipped with a mobile manipulator Smart Shuttle for the evacuation of wounded personnel and performing engineering tasks. The compact electrically powered ground robot is capable of carrying up to 100 kg of cargo and can be controlled at a distance of up to 5 km.

❗️The 🇺🇦Ukrainian company Temerland is preparing to test an upgraded ground robotic platform "Gnom" ("Gnome"), equipped with a mobile manipulator Smart Shuttle for the evacuation of wounded personnel and performing engineering tasks. The compact electrically powered ground robot is capable of carrying up to 100 kg of cargo and can be controlled at a distance of up to 5 km.

🪖MilitaryNewsUA🇺🇦

29,134 görüntüleme • 4 ay önce

finished a (mostly) faithful replica of Tetris The Grand Master (1998) This is the first tetris game that is fully 3D, has automatic wallkicks, a drop preview, and the ability to let you rotate the piece before it spawns in.

finished a (mostly) faithful replica of Tetris The Grand Master (1998) This is the first tetris game that is fully 3D, has automatic wallkicks, a drop preview, and the ability to let you rotate the piece before it spawns in.

Acerola

20,664 görüntüleme • 5 ay önce

VLAI Robotics Launches High-Dexterity Dual-Arm Robot Starting at ~$5,500 USD VLAI Robotics, utilizing the open-source design of Japan’s OpenArm team, has introduced a high-dexterity, low-cost bimanual robotic system. The product is priced from 39,900 RMB (approximately 5,500 USD), making high-level research tools accessible to institutions and developers. The robot features a human-scale, arm-hand integrated design with up to 16 DOF (8 DOF per arm, including the gripper). It can handle a dual-arm peak payload of 12 kg while maintaining high precision. A key breakthrough is its ability to replicate human upper limb movement trajectories, which enhances data quality for imitation learning and remote operation. VLAI Robotics handled the domestic engineering, manufacturing, and VLA (Vision-Language-Action) algorithm integration, with quality control organized according to the strict standards of the OpenArm R&D framework. The robot is highly adaptable for research, education, and Physical AI training, supporting easy expansion for features like VR teleoperation.

VLAI Robotics Launches High-Dexterity Dual-Arm Robot Starting at ~$5,500 USD VLAI Robotics, utilizing the open-source design of Japan’s OpenArm team, has introduced a high-dexterity, low-cost bimanual robotic system. The product is priced from 39,900 RMB (approximately 5,500 USD), making high-level research tools accessible to institutions and developers. The robot features a human-scale, arm-hand integrated design with up to 16 DOF (8 DOF per arm, including the gripper). It can handle a dual-arm peak payload of 12 kg while maintaining high precision. A key breakthrough is its ability to replicate human upper limb movement trajectories, which enhances data quality for imitation learning and remote operation. VLAI Robotics handled the domestic engineering, manufacturing, and VLA (Vision-Language-Action) algorithm integration, with quality control organized according to the strict standards of the OpenArm R&D framework. The robot is highly adaptable for research, education, and Physical AI training, supporting easy expansion for features like VR teleoperation.

RoboHub🤖

12,961 görüntüleme • 10 ay önce

OPEN SOURCE - CM6 V2 Robotic arm 𝗧𝗘𝗟𝗘𝗣𝗢𝗥𝗧𝗔𝗧𝗜𝗢𝗡 and 𝗔𝗜 𝗥𝗘𝗦𝗘𝗔𝗥𝗖𝗛: This is the new version of their previous experimental robot, CM6, and it is equipped with QDD drives. Here, you can witness impedance control in action❗ 🛠️The CM6 robot uses six flexible BLDC motors with small gearboxes to ensure safety and compliance. It features customizable designs with changeable aluminum parts and gear ratios, making it an ideal platform for research in compliant robotics. 💡However, it's less refined compared to other models like PAROL6, with some parts being expensive and difficult to find. Building it also requires significant tinkering, as the instructions are not very detailed. 🌟 All credit goes to SourceRobotics - have a look also at their YouTube channel! 📂 Files and intro page for first version of CM6 COBOT robotic arm: Saying Hi to founder Petar Crnjak 👋

OPEN SOURCE - CM6 V2 Robotic arm 𝗧𝗘𝗟𝗘𝗣𝗢𝗥𝗧𝗔𝗧𝗜𝗢𝗡 and 𝗔𝗜 𝗥𝗘𝗦𝗘𝗔𝗥𝗖𝗛: This is the new version of their previous experimental robot, CM6, and it is equipped with QDD drives. Here, you can witness impedance control in action❗ 🛠️The CM6 robot uses six flexible BLDC motors with small gearboxes to ensure safety and compliance. It features customizable designs with changeable aluminum parts and gear ratios, making it an ideal platform for research in compliant robotics. 💡However, it's less refined compared to other models like PAROL6, with some parts being expensive and difficult to find. Building it also requires significant tinkering, as the instructions are not very detailed. 🌟 All credit goes to SourceRobotics - have a look also at their YouTube channel! 📂 Files and intro page for first version of CM6 COBOT robotic arm: Saying Hi to founder Petar Crnjak 👋

Ilir Aliu

37,522 görüntüleme • 1 yıl önce