Загрузка видео...

Не удалось загрузить видео

На главную

Finally, someone automating the boring infrastructure stuff! 🫟 Road markings is tough. Nobody cares about them until they're gone. Then suddenly everyone's mad. But someone has to paint those lines, in traffic, in bad weather, repetitively. So 10LINES built a robot that just... does it. Workers don't have to...

lukas_m_ziegler's profile picture

Lukas Ziegler

58,842 subscribers

34,834 просмотров • 1 месяц назад •via X (Twitter)

Наука и технологии
LIVE

Anya Rossi• Live Now

Private livecam show

Комментарии: 0

Нет доступных комментариев

Здесь появятся комментарии из оригинального поста

Похожие видео

A pentagon robot! 🖐🏽 Compared to typical SCARA models, it delivers higher speed, improved stability, better space efficiency, and can operate smoothly in tight areas, even through singularity positions. These robots are a good fit for handling complex tasks in challenging environments where conventional robots often fall short. Have you ever seen a robot like this? 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:24

A pentagon robot! 🖐🏽 Compared to typical SCARA models, it delivers higher speed, improved stability, better space efficiency, and can operate smoothly in tight areas, even through singularity positions. These robots are a good fit for handling complex tasks in challenging environments where conventional robots often fall short. Have you ever seen a robot like this? 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

42,565 просмотров • 5 месяцев назад

China is crazy. 🤯 Forget a classical grippers, and welcome to era of humanoid acting as EOATs. Someone thinking about the gripper, actually said: you know what, let's just stick half a humanoid in there and that'll solve the problem. Humanoid torso from LimX Dynamics mounted on a 6-axis industrial robot arm wasn't on my 2026 bingo, but I'll take it. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
1:34

China is crazy. 🤯 Forget a classical grippers, and welcome to era of humanoid acting as EOATs. Someone thinking about the gripper, actually said: you know what, let's just stick half a humanoid in there and that'll solve the problem. Humanoid torso from LimX Dynamics mounted on a 6-axis industrial robot arm wasn't on my 2026 bingo, but I'll take it. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

98,421 просмотров • 23 дней назад

Six arms instead of two! 🤯 Midea Group humanoid robot has six arms instead of two. It handles heavy components with lower limbs and performs fine assembly work with upper limbs. Full 360-degree rotation, stable vertical lifting, rapid tool-swapping. The robot handles workstation transitions that would typically require multiple human workers or separate machines. So no idle-time between stations. Pretty cool. But I'm really curious about the cost, and how this 6-arms robot compares to a regular robot arm, and then to a regular humanoid What do yo think? Overcomplicated? ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:20

Six arms instead of two! 🤯 Midea Group humanoid robot has six arms instead of two. It handles heavy components with lower limbs and performs fine assembly work with upper limbs. Full 360-degree rotation, stable vertical lifting, rapid tool-swapping. The robot handles workstation transitions that would typically require multiple human workers or separate machines. So no idle-time between stations. Pretty cool. But I'm really curious about the cost, and how this 6-arms robot compares to a regular robot arm, and then to a regular humanoid What do yo think? Overcomplicated? ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

12,841 просмотров • 2 месяцев назад

Spiderman's stuntman is a robot! 🕸️ The Walt Disney Company Imagineers designed an advanced robotics figure that flies 25 meters in the air making its own real-time decisions as it tucks, somersaults, slows down, and climbs. 🤹🏼‍♀️ The result is Spider-Man in Avengers Campus, flying above with gravity-defying feats never before seen in a Disney park. That's incredible to see how robotics is changing different verticals! That's pure magic to me! 🔮 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:53

Spiderman's stuntman is a robot! 🕸️ The Walt Disney Company Imagineers designed an advanced robotics figure that flies 25 meters in the air making its own real-time decisions as it tucks, somersaults, slows down, and climbs. 🤹🏼‍♀️ The result is Spider-Man in Avengers Campus, flying above with gravity-defying feats never before seen in a Disney park. That's incredible to see how robotics is changing different verticals! That's pure magic to me! 🔮 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

40,136 просмотров • 14 дней назад

Spiderman's stuntman is a robot! 🕸️ The Walt Disney Company Imagineers designed an advanced robotics figure that flies 25 meters in the air making its own real-time decisions as it tucks, somersaults, slows down, and climbs. 🤹🏼‍♀️ The result is Spider-Man in Avengers Campus, flying above with gravity-defying feats never before seen in a Disney park. That's incredible to see how robotics is changing different verticals! That's pure magic to me! 🔮 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:53

Spiderman's stuntman is a robot! 🕸️ The Walt Disney Company Imagineers designed an advanced robotics figure that flies 25 meters in the air making its own real-time decisions as it tucks, somersaults, slows down, and climbs. 🤹🏼‍♀️ The result is Spider-Man in Avengers Campus, flying above with gravity-defying feats never before seen in a Disney park. That's incredible to see how robotics is changing different verticals! That's pure magic to me! 🔮 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

799,822 просмотров • 8 месяцев назад

This is what open robotics actually looks like! 🔓 I was in Bordeaux, sitting inside Pollen Robotics, and had a chance to play around with their humanoid robot Reachy 2. It’s expressive, modular, and can even bring you coffee, and of course runs Python or Rust. I was talking with Reachy in 3 different languages, tele-operating it and manipulating kitchen stuff, and make it even mimic my gestures. The best part is that there are no locked APIs, or hidden stuff, just an open platform that you can build upon. The connection with Hugging Face makes it super easy to start, as the open source approach allows everyone to contribute, experiment and add their own things. I already ordered his little brother Reachy Mini, let's see what a robotics rookie can do with that robot! 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
1:36

This is what open robotics actually looks like! 🔓 I was in Bordeaux, sitting inside Pollen Robotics, and had a chance to play around with their humanoid robot Reachy 2. It’s expressive, modular, and can even bring you coffee, and of course runs Python or Rust. I was talking with Reachy in 3 different languages, tele-operating it and manipulating kitchen stuff, and make it even mimic my gestures. The best part is that there are no locked APIs, or hidden stuff, just an open platform that you can build upon. The connection with Hugging Face makes it super easy to start, as the open source approach allows everyone to contribute, experiment and add their own things. I already ordered his little brother Reachy Mini, let's see what a robotics rookie can do with that robot! 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

19,433 просмотров • 7 месяцев назад

This robot is playing Tetris! 🧊 AGILOX dropped something exciting at LogiMAT. One of the most requested robot use cases finally automated: Manual truck loading. What I'm really impressed of is the high precision positioning of pallets directly next to the truck or container wall. It's 2026 and I love that fact that AMR companies are not just moving goods from A to B anymore, but they innovate and look for more value-adding tasks across logistics sites and manufacturing plants! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:28

This robot is playing Tetris! 🧊 AGILOX dropped something exciting at LogiMAT. One of the most requested robot use cases finally automated: Manual truck loading. What I'm really impressed of is the high precision positioning of pallets directly next to the truck or container wall. It's 2026 and I love that fact that AMR companies are not just moving goods from A to B anymore, but they innovate and look for more value-adding tasks across logistics sites and manufacturing plants! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

11,998 просмотров • 4 месяцев назад

JUST IN: Unitree Robotics just unveiled the GD01, a manned "mecha" robot that transforms between two legs and four legs in real time. This is not a concept. This is a product. Starting price: $574,000. This robot weighs 500kg, is built from high-strength alloy, and has a torso-mounted cockpit. The demo video shows it walking upright, knocking down a brick wall with its hand, then reconfiguring into a four-legged crawl. Unitree calls it the world's first mass-produced transformable mecha. But the real story here is the bigger picture. Chinese companies accounted for nearly 90% of global humanoid robot sales in 2025. Unitree alone shipped 5,500+ humanoid robots last year. In the same period, Tesla, Figure AI and Agility Robotics each shipped around 150. And Unitree is now filing for an IPO on Shanghai's Star Market, targeting 4.2 billion yuan, 85% of which goes straight into R&D. The West is building incredible humanoid robots. China is building them faster, cheaper and at a scale nobody else is close to matching. Read more here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
1:06

JUST IN: Unitree Robotics just unveiled the GD01, a manned "mecha" robot that transforms between two legs and four legs in real time. This is not a concept. This is a product. Starting price: $574,000. This robot weighs 500kg, is built from high-strength alloy, and has a torso-mounted cockpit. The demo video shows it walking upright, knocking down a brick wall with its hand, then reconfiguring into a four-legged crawl. Unitree calls it the world's first mass-produced transformable mecha. But the real story here is the bigger picture. Chinese companies accounted for nearly 90% of global humanoid robot sales in 2025. Unitree alone shipped 5,500+ humanoid robots last year. In the same period, Tesla, Figure AI and Agility Robotics each shipped around 150. And Unitree is now filing for an IPO on Shanghai's Star Market, targeting 4.2 billion yuan, 85% of which goes straight into R&D. The West is building incredible humanoid robots. China is building them faster, cheaper and at a scale nobody else is close to matching. Read more here: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

11,690 просмотров • 3 месяцев назад

A versatile robot helping out airports! 🛩️ Meet a two-wheeled robot from Fraunhofer IML! 🦿 This balancing robot with gripping arms successfully completed its initial practical tests at the cargo terminal of Munich Airport a while ago. It transported goods, supported loading and unloading, and assisted with physically demanding logistics tasks. This robot can carry loads of up to 100 kg and reach speeds of around 60 km/h. That’s far beyond what most AMRs can handle, yet it still has arms and a form of mobility that lets it work in spaces designed for people. P.S. What other applications would you use this robot for?! 🦾 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:49

A versatile robot helping out airports! 🛩️ Meet a two-wheeled robot from Fraunhofer IML! 🦿 This balancing robot with gripping arms successfully completed its initial practical tests at the cargo terminal of Munich Airport a while ago. It transported goods, supported loading and unloading, and assisted with physically demanding logistics tasks. This robot can carry loads of up to 100 kg and reach speeds of around 60 km/h. That’s far beyond what most AMRs can handle, yet it still has arms and a form of mobility that lets it work in spaces designed for people. P.S. What other applications would you use this robot for?! 🦾 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

29,773 просмотров • 7 месяцев назад

A 40-year-old patent has finally been brought to life. That's the Y-zipper. A 3D-printed three-sided fastener that transitions any object from flexible to rigid and back again. The robotics application is the one that caught my attention. A quadruped robot that adjusts its leg stiffness depending on terrain, switching between rigid and flexible in real time without additional motors or complex mechanical systems. But this goes way beyond robotics. A wrist cast that loosens during the day and stiffens at night. A tent that pops into shape in 90 seconds instead of six minutes. The idea sat in a patent filing for four decades. It took 3D printing to finally make it real. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
3:58

A 40-year-old patent has finally been brought to life. That's the Y-zipper. A 3D-printed three-sided fastener that transitions any object from flexible to rigid and back again. The robotics application is the one that caught my attention. A quadruped robot that adjusts its leg stiffness depending on terrain, switching between rigid and flexible in real time without additional motors or complex mechanical systems. But this goes way beyond robotics. A wrist cast that loosens during the day and stiffens at night. A tent that pops into shape in 90 seconds instead of six minutes. The idea sat in a patent filing for four decades. It took 3D printing to finally make it real. ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

1,805,415 просмотров • 3 месяцев назад

This robot explores the world like a mouse! 🐁 That's an OG project, guess the year ;) A mouse-inspired bot called WhiskEye travels the world with 24 artificial whiskers and spiking neurons that mimic a nervous system. Recognizing familiar places is essential for engineering applications like robot navigation, where interactions with the real world are key. Combining information from multiple senses helps to make better accuracy and robustness, but challenges like mismatched data and sensor errors complicate this process. Inspired by how animals navigate seamlessly, researchers developed predictive coding, a self-supervised learning method based on the brain's visual cortex model. It combines visual and tactile cues from a robot, outperforming existing methods in recognizing places, even when some sensors fail. What a great project from BristolRoboticsLab and Sheffield Robotics! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:34

This robot explores the world like a mouse! 🐁 That's an OG project, guess the year ;) A mouse-inspired bot called WhiskEye travels the world with 24 artificial whiskers and spiking neurons that mimic a nervous system. Recognizing familiar places is essential for engineering applications like robot navigation, where interactions with the real world are key. Combining information from multiple senses helps to make better accuracy and robustness, but challenges like mismatched data and sensor errors complicate this process. Inspired by how animals navigate seamlessly, researchers developed predictive coding, a self-supervised learning method based on the brain's visual cortex model. It combines visual and tactile cues from a robot, outperforming existing methods in recognizing places, even when some sensors fail. What a great project from BristolRoboticsLab and Sheffield Robotics! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

36,775 просмотров • 7 месяцев назад

A humanoidal welder! 👨🏼‍🏭 Persona AI deployed their humanoid to a real welding facility in Houston and executed an actual weld. All of that in a hot-work industrial environment with arc flash, smoke, and uneven flooring. The robot squats down, executes the weld with a steady arc, stands back up. Functional welding requires multi-joint precision, spatial awareness, and real-time path correction. The robot had to hold a lit torch, maintain arc stability, and lay down a valid weld path. The motion is choppy. They're honest about that. But they proved the robot can handle the full sequence that actual industrial work demands. Get low, do precision work, stand up, move to the next spot. That's the rhythm of real welding jobs. Teleoperation is their training method. VR headset interface captures expert demonstrations. Those become the data to train neural networks toward eventual autonomy. This is what deploying into real facilities means. That's a nice one gents Nicolaus Radford! Here's more detailed blog: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:29

A humanoidal welder! 👨🏼‍🏭 Persona AI deployed their humanoid to a real welding facility in Houston and executed an actual weld. All of that in a hot-work industrial environment with arc flash, smoke, and uneven flooring. The robot squats down, executes the weld with a steady arc, stands back up. Functional welding requires multi-joint precision, spatial awareness, and real-time path correction. The robot had to hold a lit torch, maintain arc stability, and lay down a valid weld path. The motion is choppy. They're honest about that. But they proved the robot can handle the full sequence that actual industrial work demands. Get low, do precision work, stand up, move to the next spot. That's the rhythm of real welding jobs. Teleoperation is their training method. VR headset interface captures expert demonstrations. Those become the data to train neural networks toward eventual autonomy. This is what deploying into real facilities means. That's a nice one gents Nicolaus Radford! Here's more detailed blog: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

61,658 просмотров • 1 месяц назад

Robotics is entering the mainstream! 👀 Let's accept this fact. Consumptionism – stonks. Possibilities (HW + SW) – stonks. Demographics - not stonks. Modern robots are often designed to interact with our legacy world, whether it's a household, a factory, or a shipyard. That means they often need to work with existing machines, tools, and spaces. In short: retrofitting. Improving old machines with new technologies without major interference in their operation. Modern way of integrating things. You don't have to change the entire environment to deploy a robot. The robot will adapt, just as human would when freshly hired. The promise is to have an army of robots to help with the world designed for us. I also believe that general purpose robots, are not a direct competition for single purpose machines (like a highly efficient specialized packaging machine, for example). It's like adding a robot to this carriage. Specialized machine could be a car ;) ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:59

Robotics is entering the mainstream! 👀 Let's accept this fact. Consumptionism – stonks. Possibilities (HW + SW) – stonks. Demographics - not stonks. Modern robots are often designed to interact with our legacy world, whether it's a household, a factory, or a shipyard. That means they often need to work with existing machines, tools, and spaces. In short: retrofitting. Improving old machines with new technologies without major interference in their operation. Modern way of integrating things. You don't have to change the entire environment to deploy a robot. The robot will adapt, just as human would when freshly hired. The promise is to have an army of robots to help with the world designed for us. I also believe that general purpose robots, are not a direct competition for single purpose machines (like a highly efficient specialized packaging machine, for example). It's like adding a robot to this carriage. Specialized machine could be a car ;) ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

14,396 просмотров • 6 месяцев назад

15–30 minutes of real-world robot data. That's now enough to go from sim-to-real failure to working robot. Let’s see… You train a robot in simulation. You deploy it in the real world. It fails. The physics don't match. So you try to fine-tune it with real data, but… you never have enough real data, and the fine-tuning breaks everything the simulation taught it. SimDist fixes this with one key decision: don't transfer the policy. Transfer the world model. Keep the reward and value knowledge from simulation frozen. Only update the part that's actually wrong, how the robot predicts physics. Now the robot doesn't have to relearn the entire task in the real world. It already knows what success looks like. It just needs to correct its understanding of how the real world moves. The part that makes this work: they also trained on failures and recoveries; not just perfect demonstrations. Without that, the planner finds the gaps and exploits them. With it, the robot can tell a good future from a bad one. That's all it needs. Results on peg insertion, table leg assembly, locomotion on slippery and uneven surfaces. Tasks that require precision, force, and quick reaction. Thanks for sharing, Tyler Westenbroek ([Tyler Westenbroek]. Interactive visualization + paper: ——- Weekly robotics and AI insights. Subscribe free:
0:41

15–30 minutes of real-world robot data. That's now enough to go from sim-to-real failure to working robot. Let’s see… You train a robot in simulation. You deploy it in the real world. It fails. The physics don't match. So you try to fine-tune it with real data, but… you never have enough real data, and the fine-tuning breaks everything the simulation taught it. SimDist fixes this with one key decision: don't transfer the policy. Transfer the world model. Keep the reward and value knowledge from simulation frozen. Only update the part that's actually wrong, how the robot predicts physics. Now the robot doesn't have to relearn the entire task in the real world. It already knows what success looks like. It just needs to correct its understanding of how the real world moves. The part that makes this work: they also trained on failures and recoveries; not just perfect demonstrations. Without that, the planner finds the gaps and exploits them. With it, the robot can tell a good future from a bad one. That's all it needs. Results on peg insertion, table leg assembly, locomotion on slippery and uneven surfaces. Tasks that require precision, force, and quick reaction. Thanks for sharing, Tyler Westenbroek ([Tyler Westenbroek]. Interactive visualization + paper: ——- Weekly robotics and AI insights. Subscribe free:

Ilir Aliu

14,214 просмотров • 3 месяцев назад

Feeling what a robot feels is becoming real! 🫰 Fluid Reality just ran its first full end-to-end touch teleoperation system, and the demo shows why high-resolution haptics might be the missing piece in robot control. A 22 mm fingertip display with 32 independently actuated “bubbles” was mapped directly to tactile sensors on a robot hand. 🫧 Three fingers streamed real-time touch data robot → human, giving the operator actual contact feedback instead of waving their hands blind, like most teleop systems today. It’s still early, but this is a real step toward dexterous ops and high-quality data for training Physical AI systems. Companies involved: Samsung Electronics, Alt-Bionics, Inc. (the robot hand), MANUS™ (hand tracking), and Sensible Robotics (fingertip sensors) Touch isn’t a nice-to-have in robotics. It’s the difference between manipulation that works in the real world P.S. Guess how many touch receptors we humans, have in our hand! :) ~~ ♻ Join the weekly robotics newsletter, and never miss any news →
1:23

Feeling what a robot feels is becoming real! 🫰 Fluid Reality just ran its first full end-to-end touch teleoperation system, and the demo shows why high-resolution haptics might be the missing piece in robot control. A 22 mm fingertip display with 32 independently actuated “bubbles” was mapped directly to tactile sensors on a robot hand. 🫧 Three fingers streamed real-time touch data robot → human, giving the operator actual contact feedback instead of waving their hands blind, like most teleop systems today. It’s still early, but this is a real step toward dexterous ops and high-quality data for training Physical AI systems. Companies involved: Samsung Electronics, Alt-Bionics, Inc. (the robot hand), MANUS™ (hand tracking), and Sensible Robotics (fingertip sensors) Touch isn’t a nice-to-have in robotics. It’s the difference between manipulation that works in the real world P.S. Guess how many touch receptors we humans, have in our hand! :) ~~ ♻ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

46,927 просмотров • 8 месяцев назад

Rope climbing robots! 🪢 One objective, multiple approaches to achieve it. Back in 2017 undergraduates from Mechanical Science and Engineering at the University of Illinois utilized many mechanical strategies and tools to create a full menagerie of rope-climbing robots. Amazing creativity and uniqueness of each solution. Which robot is your favorite? Personally, I would say the one at the end dressed as a monkey! 🦍 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
1:15

Rope climbing robots! 🪢 One objective, multiple approaches to achieve it. Back in 2017 undergraduates from Mechanical Science and Engineering at the University of Illinois utilized many mechanical strategies and tools to create a full menagerie of rope-climbing robots. Amazing creativity and uniqueness of each solution. Which robot is your favorite? Personally, I would say the one at the end dressed as a monkey! 🦍 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

13,056 просмотров • 6 месяцев назад

JUST IN — Senate Majority Leader John Thune: "This is not a political game... I don't care what the polls say. Nobody wins in a government shutdown. The government needs to open up again, and holding it hostage to do stuff like what they're trying to do has just never been done before."
0:25

JUST IN — Senate Majority Leader John Thune: "This is not a political game... I don't care what the polls say. Nobody wins in a government shutdown. The government needs to open up again, and holding it hostage to do stuff like what they're trying to do has just never been done before."

Fox News

385,171 просмотров • 10 месяцев назад

Unloading trucks with robots! 📦 Bastian Solutions has developed a mobile robot system that automates high-volume, floor-level unloading of trailers. Let's have a closer look at how it actually works! The robot seamlessly drives itself in and out of trailers and docks without any fixed infrastructure. This system picks up cases via an extendable conveyor, lifts them using a retractable mast, and accurately places them inside the trailer using a dedicated gripper. In the video you can see the reversed process, unloading of a truck. 🚛 It's guided by LiDAR-based navigation and an omnidirectional base, enabling fast, precise, and infrastructure-free operation. Integrates smoothly with existing systems like conveyors, scanners, sorters, and depalletizers. Every time I see a robot loading and unloading a truck, I'm like: we are getting there :) ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:23

Unloading trucks with robots! 📦 Bastian Solutions has developed a mobile robot system that automates high-volume, floor-level unloading of trailers. Let's have a closer look at how it actually works! The robot seamlessly drives itself in and out of trailers and docks without any fixed infrastructure. This system picks up cases via an extendable conveyor, lifts them using a retractable mast, and accurately places them inside the trailer using a dedicated gripper. In the video you can see the reversed process, unloading of a truck. 🚛 It's guided by LiDAR-based navigation and an omnidirectional base, enabling fast, precise, and infrastructure-free operation. Integrates smoothly with existing systems like conveyors, scanners, sorters, and depalletizers. Every time I see a robot loading and unloading a truck, I'm like: we are getting there :) ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

65,144 просмотров • 1 месяц назад

Awesome Robotics! 💾 Building your own robot just got a lot easier. MathWorks have released an open-source GitHub repository packed with robotics resources for anyone interested in getting hands-on. The repo includes examples for robot arms, ground vehicles, and drones, with projects that show how to connect with ROS and ROS2 or even deploy Simulink models directly as ROS nodes. There are also more advanced demos, like modeling off-road environments and testing navigation algorithms in photorealistic simulations. Everything is well-documented, with tutorials and links that make it easy to go from concept to prototype. 📑 Whether you’re a student, researcher, or just curious, there’s material here for every level. And since it’s an open community project, you can not only explore but also share your own contributions. For anyone looking to learn robotics by doing, this is a solid place to start! Here’s the link: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
1:08

Awesome Robotics! 💾 Building your own robot just got a lot easier. MathWorks have released an open-source GitHub repository packed with robotics resources for anyone interested in getting hands-on. The repo includes examples for robot arms, ground vehicles, and drones, with projects that show how to connect with ROS and ROS2 or even deploy Simulink models directly as ROS nodes. There are also more advanced demos, like modeling off-road environments and testing navigation algorithms in photorealistic simulations. Everything is well-documented, with tutorials and links that make it easy to go from concept to prototype. 📑 Whether you’re a student, researcher, or just curious, there’s material here for every level. And since it’s an open community project, you can not only explore but also share your own contributions. For anyone looking to learn robotics by doing, this is a solid place to start! Here’s the link: ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

59,232 просмотров • 3 месяцев назад

Octopus inspired robot! 🐙 Researchers at the National University of Singapore have created a streamlined octopus-inspired swimming robot capable of replicating the animal’s agile movement through water. Unlike previous designs that require eight actuators for each arm, this robot simplifies the mechanics using just two motors and an umbrella-like mechanism to coordinate its eight soft arms. As it swims, the robot’s arms gently open to reduce drag, then quickly close to generate thrust mimicking the jet-propulsion used by real octopuses. In lab tests, it reached speeds up to 314 mm/s. This soft robotic platform not only matches the swimming performance of more complex systems but also offers greater energy efficiency. Pretty cool nature-inspired robot application! 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →
0:42

Octopus inspired robot! 🐙 Researchers at the National University of Singapore have created a streamlined octopus-inspired swimming robot capable of replicating the animal’s agile movement through water. Unlike previous designs that require eight actuators for each arm, this robot simplifies the mechanics using just two motors and an umbrella-like mechanism to coordinate its eight soft arms. As it swims, the robot’s arms gently open to reduce drag, then quickly close to generate thrust mimicking the jet-propulsion used by real octopuses. In lab tests, it reached speeds up to 314 mm/s. This soft robotic platform not only matches the swimming performance of more complex systems but also offers greater energy efficiency. Pretty cool nature-inspired robot application! 👀 ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

16,161 просмотров • 19 дней назад