Загрузка видео...

Не удалось загрузить видео

Возникла проблема при загрузке этого видео. Это может быть связано с временными проблемами сети или видео может быть недоступно.

На главную

Linkerbot Unveils a Lightweight, High-Performance Dexterous Hand Priced Under $1K Linkerbot has just launched the Linker Hand O6, a new cost-effective and high-performance dexterous hand. It's designed to be lightweight and compact, weighing just 370g—around the size of a female hand. ► The hand features a total of 11... show more

RoboHub🤖

6,482 subscribers

50,892 просмотров • 11 месяцев назад •via X (Twitter)

Наука и технологии

Anya Rossi• Live Now

Private livecam show

Комментарии: 0

Нет доступных комментариев

Здесь появятся комментарии из оригинального поста

Похожие видео

To be surrounded by China's dexterous hands Linker Hand06, developed by Beijing LinkerBot, is a human-sized robotic hand priced at $937 (¥6666). weighs 370g, supports loads up to 30kg, and 11 degrees of freedom. The design enables potential use in industrial and commercial service applications.

To be surrounded by China's dexterous hands Linker Hand06, developed by Beijing LinkerBot, is a human-sized robotic hand priced at $937 (¥6666). weighs 370g, supports loads up to 30kg, and 11 degrees of freedom. The design enables potential use in industrial and commercial service applications.

CyberRobo

45,779 просмотров • 11 месяцев назад

A dexterous hand capable of operating an iPhone Impressive, with nimble fingertip control. INSPIRE ROBOTS from Beijing has released a new dexterous hand featuring tactile and force sensing, and equipped with a motion library, making it ready to use right out of the box. Especially noteworthy is the modular finger design, allowing users to easily replace a damaged finger. With 13 degrees of freedom and a single-hand load capacity of 30kg, it can be used in general applications such as factory component handling, precision assembly, and warehouse logistics sorting. Notably, this company has already sold over 10,000 of these dexterous hands.

A dexterous hand capable of operating an iPhone Impressive, with nimble fingertip control. INSPIRE ROBOTS from Beijing has released a new dexterous hand featuring tactile and force sensing, and equipped with a motion library, making it ready to use right out of the box. Especially noteworthy is the modular finger design, allowing users to easily replace a damaged finger. With 13 degrees of freedom and a single-hand load capacity of 30kg, it can be used in general applications such as factory component handling, precision assembly, and warehouse logistics sorting. Notably, this company has already sold over 10,000 of these dexterous hands.

CyberRobo

14,196 просмотров • 7 месяцев назад

Open-Source Robotic Hand That Costs Just $300. California-based company TetherIA.ai has officially launched its open-source robotic hand, the Aero Hand Open. Designed to be the most capable at the lowest cost, this hand is a new tool for embodied AI research. In the clip, it demonstrates impressive dexterity by grasping an M5 screw, picking up an iPhone, and opening a soda can. Key Features: ► Price: $314.00 ► Open Source: CAD, electronics, and firmware are all open source. ► Actuation: 7 Active Degrees of Freedom (16 joints) with a tendon-driven design. ► Weight: Under 400 grams. ► Purpose: Built for embodied AI research to make dexterous manipulation accessible to all. For more details and to purchase:

Open-Source Robotic Hand That Costs Just $300. California-based company TetherIA.ai has officially launched its open-source robotic hand, the Aero Hand Open. Designed to be the most capable at the lowest cost, this hand is a new tool for embodied AI research. In the clip, it demonstrates impressive dexterity by grasping an M5 screw, picking up an iPhone, and opening a soda can. Key Features: ► Price: $314.00 ► Open Source: CAD, electronics, and firmware are all open source. ► Actuation: 7 Active Degrees of Freedom (16 joints) with a tendon-driven design. ► Weight: Under 400 grams. ► Purpose: Built for embodied AI research to make dexterous manipulation accessible to all. For more details and to purchase:

RoboHub🤖

45,830 просмотров • 11 месяцев назад

Can robotic hands really outperform human dexterity? Meet the Linker Hand L30 from LinkerBot. This tendon-driven dexterous hand packs high precision and compact size, making it a serious contender for complex manipulation tasks: ► 22 Degrees of Freedom utilizing a sophisticated tendon drive system. ► Ultra-fine positioning control with ±0.20mm repeatable accuracy. ► Rapid response speed, achieving up to 450°/S for core movements. ► Adaptive grasping enabled by high-sensitivity tactile sensors built into the fingertips. ► Compact dimensions (85mm average width, 179mm length) despite its complex architecture.

Can robotic hands really outperform human dexterity? Meet the Linker Hand L30 from LinkerBot. This tendon-driven dexterous hand packs high precision and compact size, making it a serious contender for complex manipulation tasks: ► 22 Degrees of Freedom utilizing a sophisticated tendon drive system. ► Ultra-fine positioning control with ±0.20mm repeatable accuracy. ► Rapid response speed, achieving up to 450°/S for core movements. ► Adaptive grasping enabled by high-sensitivity tactile sensors built into the fingertips. ► Compact dimensions (85mm average width, 179mm length) despite its complex architecture.

RoboHub🤖

22,556 просмотров • 10 месяцев назад

Can a dexterous hand still function after being run over by a 2-ton car? The dexterous hand is the most expensive component of a humanoid robot, and if it breaks, the task is interrupted. Hangzhou BrainCo conducted a rigorous test on its latest dexterous hand, Revo2: it was run over by a nearly 2-ton Volvo car, dropped from a height of 5m, dropped 30m, and subjected to forceful impacts from a Unitree G1 robot. It still managed to maintain a stable grip and continue operating. Revo2 is BrainCo's next-generation dexterous/bionic hand, released last year. yes, a human-robot hybrid hand. It's very light, only 383g, 20kg payload,capable of precision manipulation down to 0.1mm (such as threading a needle), and possesses multi-dimensional tactile perception (hardness, texture, direction, proximity, etc.). This test also demonstrates that after achieving breakthroughs in performance, a dexterous hand also needs to be extremely durable and able to function under extreme environmental pressures.

Can a dexterous hand still function after being run over by a 2-ton car? The dexterous hand is the most expensive component of a humanoid robot, and if it breaks, the task is interrupted. Hangzhou BrainCo conducted a rigorous test on its latest dexterous hand, Revo2: it was run over by a nearly 2-ton Volvo car, dropped from a height of 5m, dropped 30m, and subjected to forceful impacts from a Unitree G1 robot. It still managed to maintain a stable grip and continue operating. Revo2 is BrainCo's next-generation dexterous/bionic hand, released last year. yes, a human-robot hybrid hand. It's very light, only 383g, 20kg payload,capable of precision manipulation down to 0.1mm (such as threading a needle), and possesses multi-dimensional tactile perception (hardness, texture, direction, proximity, etc.). This test also demonstrates that after achieving breakthroughs in performance, a dexterous hand also needs to be extremely durable and able to function under extreme environmental pressures.

CyberRobo

45,434 просмотров • 6 месяцев назад

My eyes can't keep up with its hand gestures. Xynova's new dexterous hand--Prima1, uses direct drive. 22 degrees of freedom, tactile sensing, high-precision force control... it seems designed more for industrial manufacturing scenarios. They will be showcasing a physical hand at the WRC in Beijing. it must be said, when people discuss which is better, Xynova has already covered tendon-driven, hybrid-driven, and direct-drive hands.

My eyes can't keep up with its hand gestures. Xynova's new dexterous hand--Prima1, uses direct drive. 22 degrees of freedom, tactile sensing, high-precision force control... it seems designed more for industrial manufacturing scenarios. They will be showcasing a physical hand at the WRC in Beijing. it must be said, when people discuss which is better, Xynova has already covered tendon-driven, hybrid-driven, and direct-drive hands.

CyberRobo

378,526 просмотров • 3 дней назад

Pretty hand👋 just like a real human hand. Hangzhou Xynova unveils the Flex 2 Hybrid-Drive Dexterous Hand (Cable-Driven + Direct-Driven). Tactile Perception, and the camera is positioned at the wrist joint rather than in the center of the palm. They will showcase the physical hand at ICRA 2026 in Vienna. (Humans have continuously replicated the hand that evolved two million years ago, while attempting to coordinate hand and brain.)

Pretty hand👋 just like a real human hand. Hangzhou Xynova unveils the Flex 2 Hybrid-Drive Dexterous Hand (Cable-Driven + Direct-Driven). Tactile Perception, and the camera is positioned at the wrist joint rather than in the center of the palm. They will showcase the physical hand at ICRA 2026 in Vienna. (Humans have continuously replicated the hand that evolved two million years ago, while attempting to coordinate hand and brain.)

CyberRobo

287,155 просмотров • 3 месяцев назад

AgiBot has launched its OmniHand 2025 series, breaking the cost barrier for dexterous hands. The new 'Agile' model is the first high-DOF hand priced under 10,000 RMB! ► 'Agile' Model: 16 DOF for interactive services. Priced at just 9,800 RMB. ► 'Pro' Model: 19 DOF with 0.1N multi-modal sensing for precise industrial tasks. This is a major step toward making robot hands accessible for wider use, thanks to innovations like their self-developed joint modules.

AgiBot has launched its OmniHand 2025 series, breaking the cost barrier for dexterous hands. The new 'Agile' model is the first high-DOF hand priced under 10,000 RMB! ► 'Agile' Model: 16 DOF for interactive services. Priced at just 9,800 RMB. ► 'Pro' Model: 19 DOF with 0.1N multi-modal sensing for precise industrial tasks. This is a major step toward making robot hands accessible for wider use, thanks to innovations like their self-developed joint modules.

RoboHub🤖

34,084 просмотров • 1 год назад

Holy… 🤯 this is literally a superhuman hand. One hand can act as both a left and a right hand. Depending on the task or the object being grasped, it can autonomously switch between left-hand and right-hand configurations, bend in reverse, and achieve degrees of freedom beyond a human hand,maximizing the efficiency of a single hand. it comes from a company in Jiangsu called ChangingTek Robotics. You could say the hand is a bit like an octopus,but it isn’t soft. It’s rigid and capable of gripping tools like wrenches, screwdrivers, drinks, and basically almost any object.

Holy… 🤯 this is literally a superhuman hand. One hand can act as both a left and a right hand. Depending on the task or the object being grasped, it can autonomously switch between left-hand and right-hand configurations, bend in reverse, and achieve degrees of freedom beyond a human hand,maximizing the efficiency of a single hand. it comes from a company in Jiangsu called ChangingTek Robotics. You could say the hand is a bit like an octopus,but it isn’t soft. It’s rigid and capable of gripping tools like wrenches, screwdrivers, drinks, and basically almost any object.

CyberRobo

65,363 просмотров • 5 месяцев назад

Hands are as important as the brain. From Shenzhen, Stella Robot has unveiled the PANTHEON HAND 22:a new generation of bionic dexterous hand that combines 22 degrees of freedom with remarkable strength and finesse. It’s a hand that truly understands precision. It can lift 30 kilograms, yet is delicate enough to thread a needle.Each finger can bear 1.5 kilograms, and the entire hand can gently hold a piece of tofu or sense the subtle expansion of a balloon. Powered by a tendon-driven mechanism with integrated actuators inside the forearm, it achieves compact design and natural, human-like movement. From precision assembly and component handling to material transport and human-robot collaboration,the PANTHEON HAND 22 shows what it means for humanoid robots to truly work with their hands.

Hands are as important as the brain. From Shenzhen, Stella Robot has unveiled the PANTHEON HAND 22:a new generation of bionic dexterous hand that combines 22 degrees of freedom with remarkable strength and finesse. It’s a hand that truly understands precision. It can lift 30 kilograms, yet is delicate enough to thread a needle.Each finger can bear 1.5 kilograms, and the entire hand can gently hold a piece of tofu or sense the subtle expansion of a balloon. Powered by a tendon-driven mechanism with integrated actuators inside the forearm, it achieves compact design and natural, human-like movement. From precision assembly and component handling to material transport and human-robot collaboration,the PANTHEON HAND 22 shows what it means for humanoid robots to truly work with their hands.

CyberRobo

26,867 просмотров • 10 месяцев назад

Xynova is the latest Chinese dexterous-hand company to raise, closing a Series A bringing cumulative funding close to RMB 1B (~$140M) It targets 2026 capacity for 10k high-DOF hands and 200k micro electric cylinders, with the new Flex 2 debuting June 2

Xynova is the latest Chinese dexterous-hand company to raise, closing a Series A bringing cumulative funding close to RMB 1B (~$140M) It targets 2026 capacity for 10k high-DOF hands and 200k micro electric cylinders, with the new Flex 2 debuting June 2

𝐀𝐆

13,669 просмотров • 2 месяцев назад

Raised hand on a Sikh soldier of the Indian Army at NH44, District Ramban (Marog). This is not just an insult to one individual but an affront to the dignity and honor of our armed forces Raising a hand on soldier is not just a legal offense it is a moral failure.

Raised hand on a Sikh soldier of the Indian Army at NH44, District Ramban (Marog). This is not just an insult to one individual but an affront to the dignity and honor of our armed forces Raising a hand on soldier is not just a legal offense it is a moral failure.

Voice of Hindus

555,565 просмотров • 10 месяцев назад

Y-Hand M1:universal hand for intelligent humanoid robots the humanoid dexterous hand with the highest degrees of freedom, developed by Yuequan Bionic Slide the pen, open the bottle, cut the paper, handle the trivial matters like a human, and soon it will be connected to the humanoid robot to become a factory operator, elderly care and home assistant. »38 DOF, 28.7k load capacity »Fingertip repeat positioning accuracy of 0.04 mm »Five-finger closure in just 0.2 seconds »Replicates human finger joints with self-developed magnetoelectric-driven artificial muscles

Y-Hand M1:universal hand for intelligent humanoid robots the humanoid dexterous hand with the highest degrees of freedom, developed by Yuequan Bionic Slide the pen, open the bottle, cut the paper, handle the trivial matters like a human, and soon it will be connected to the humanoid robot to become a factory operator, elderly care and home assistant. »38 DOF, 28.7k load capacity »Fingertip repeat positioning accuracy of 0.04 mm »Five-finger closure in just 0.2 seconds »Replicates human finger joints with self-developed magnetoelectric-driven artificial muscles

CyberRobo

14,341 просмотров • 11 месяцев назад

.Brett Adcock explains why Figure pivoted away from designing their humanoid robot's hands after human hands: "This is extremely important. If we want to solve AGI and get to human intelligence in the physical world—it's all going to start with the hands." "Our first-generation hand is a tendon-driven hand." "The rationale here is that a human hand is like this: most of our motors are in our forearm and little tendons drive all the fingers." "It ended up becoming the wrong engineering choice." "We recently unveiled our high degree of freedom, next-generation hand a month ago. This hand has human-level dexterity, as many joints in the hand as a human."

.Brett Adcock explains why Figure pivoted away from designing their humanoid robot's hands after human hands: "This is extremely important. If we want to solve AGI and get to human intelligence in the physical world—it's all going to start with the hands." "Our first-generation hand is a tendon-driven hand." "The rationale here is that a human hand is like this: most of our motors are in our forearm and little tendons drive all the fingers." "It ended up becoming the wrong engineering choice." "We recently unveiled our high degree of freedom, next-generation hand a month ago. This hand has human-level dexterity, as many joints in the hand as a human."

sourcery

316,921 просмотров • 9 дней назад

Scaling vision-language-action (VLA) models to high-DoF dexterous hands has long been a "holy grail" challenge due to the high-dimensional action space and data scarcity. As a wrap up of the year 2025, we are releasing GR-Dexter, a holistic hardware-model-data framework for generalist manipulation on a bimanual dexterous-hand robot. This is the first VLA system to achieve: ✅ High-DoF Control: Managing a 56-DoF bimanual system (21-DoF per hand). ✅ Long-Horizon Tasks with tool use: Vacuuming, bread serving with tongs, and table decluttering. ✅ Open-World Generalization: Robust performance with unseen objects and abstract instructions. Project page: ArXiv:

Scaling vision-language-action (VLA) models to high-DoF dexterous hands has long been a "holy grail" challenge due to the high-dimensional action space and data scarcity. As a wrap up of the year 2025, we are releasing GR-Dexter, a holistic hardware-model-data framework for generalist manipulation on a bimanual dexterous-hand robot. This is the first VLA system to achieve: ✅ High-DoF Control: Managing a 56-DoF bimanual system (21-DoF per hand). ✅ Long-Horizon Tasks with tool use: Vacuuming, bread serving with tongs, and table decluttering. ✅ Open-World Generalization: Robust performance with unseen objects and abstract instructions. Project page: ArXiv:

Xiao Ma

93,908 просмотров • 7 месяцев назад

Open-source dexterous hands with fingertip sensors! 🪬 ORCA Dexterity just released three dexterous hand models. Their mission: is to democratize robotic hand dexterity. They're sharing progress on exceptional, low-cost hardware and a software layer from low-level control to robotic hand learning. This is the open-source approach to dexterous manipulation. It has 83 taxels per finger with 0.1 N force detection which pretty is impressive for an open-source design. Tactile sensing is critical for dexterous manipulation, knowing contact forces enables gentle grasping, slip detection, and force-controlled assembly. Also 700g weight for the lite version makes it practical for mounting on robot arms without exceeding payload limits. Lower weight means faster movements and lower torque requirements. Open hardware accelerates robotics by letting researchers and builders modify designs for their specific needs without starting from scratch! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Open-source dexterous hands with fingertip sensors! 🪬 ORCA Dexterity just released three dexterous hand models. Their mission: is to democratize robotic hand dexterity. They're sharing progress on exceptional, low-cost hardware and a software layer from low-level control to robotic hand learning. This is the open-source approach to dexterous manipulation. It has 83 taxels per finger with 0.1 N force detection which pretty is impressive for an open-source design. Tactile sensing is critical for dexterous manipulation, knowing contact forces enables gentle grasping, slip detection, and force-controlled assembly. Also 700g weight for the lite version makes it practical for mounting on robot arms without exceeding payload limits. Lower weight means faster movements and lower torque requirements. Open hardware accelerates robotics by letting researchers and builders modify designs for their specific needs without starting from scratch! ~~ ♻️ Join the weekly robotics newsletter, and never miss any news →

Lukas Ziegler

38,094 просмотров • 5 месяцев назад

A new dexterous hand is here. DexcelRobotics, a startup founded by a former core member of Tencent Robotics X, has launched its first product, the Apex Hand. The company claims it's the first in the industry capable of operating a cell phone with a single hand. The Apex Hand is a well-rounded performer, with a focus on real-world application. Here are its key specs: ► Degrees of Freedom: 21, which the founder notes is enough to replicate most human hand functions. ► Strength: A single-finger force of ~2.5kg and a vertical lifting capacity of ~30kg. ► Speed & Precision: A response time near human-level, with positioning accuracy of ≤0.1mm. ► Robustness: Can withstand unexpected impacts and maintain stability. ► Tactile: Features self-developed flexible electronic skin with a sub-millisecond communication delay and >1000Hz refresh rate. The founder explains that while academic research often focuses on single-point breakthroughs, a commercial product needs hardware stability, data handling, and model capabilities. The company’s full-stack development experience and modular design are key to bringing this technology to a broader market, starting with semi-structured industrial environments before reaching homes.

A new dexterous hand is here. DexcelRobotics, a startup founded by a former core member of Tencent Robotics X, has launched its first product, the Apex Hand. The company claims it's the first in the industry capable of operating a cell phone with a single hand. The Apex Hand is a well-rounded performer, with a focus on real-world application. Here are its key specs: ► Degrees of Freedom: 21, which the founder notes is enough to replicate most human hand functions. ► Strength: A single-finger force of ~2.5kg and a vertical lifting capacity of ~30kg. ► Speed & Precision: A response time near human-level, with positioning accuracy of ≤0.1mm. ► Robustness: Can withstand unexpected impacts and maintain stability. ► Tactile: Features self-developed flexible electronic skin with a sub-millisecond communication delay and >1000Hz refresh rate. The founder explains that while academic research often focuses on single-point breakthroughs, a commercial product needs hardware stability, data handling, and model capabilities. The company’s full-stack development experience and modular design are key to bringing this technology to a broader market, starting with semi-structured industrial environments before reaching homes.

RoboHub🤖

125,293 просмотров • 11 месяцев назад

Humanoid Long Jump. The G1 humanoid from Unitree Robotics has completed a long jump of 1.4 meters - possibly the longest jump ever achieved by a humanoid robot of its size in the world, standing only 1.32 meters tall. The G1 has up to 43 joint motors and a dexterous three-fingered hand, designed for precise manipulation and AI research. Priced from $16,000, it features robust Sim2Real capabilities, making it a compelling choice for robotics developers.

Humanoid Long Jump. The G1 humanoid from Unitree Robotics has completed a long jump of 1.4 meters - possibly the longest jump ever achieved by a humanoid robot of its size in the world, standing only 1.32 meters tall. The G1 has up to 43 joint motors and a dexterous three-fingered hand, designed for precise manipulation and AI research. Priced from $16,000, it features robust Sim2Real capabilities, making it a compelling choice for robotics developers.

Circuit

26,485 просмотров • 1 год назад

New humanoid startup out of Hungary: Allonic The unique hand design moves away from rigid industrial design toward a biomimetic approach. - Each finger is braided around like a rope in a single autonomous process; this process also includes the threading of the tendons through the braided "tissues." - The braidings wrap around and provide distributed load across the surface of the finger rather than a single point of failure. - The hand naturally conforms to objects during a grip and allows for variable stiffness like human hands. The cost of the hand (not including motors) could be as low as $50.

New humanoid startup out of Hungary: Allonic The unique hand design moves away from rigid industrial design toward a biomimetic approach. - Each finger is braided around like a rope in a single autonomous process; this process also includes the threading of the tendons through the braided "tissues." - The braidings wrap around and provide distributed load across the surface of the finger rather than a single point of failure. - The hand naturally conforms to objects during a grip and allows for variable stiffness like human hands. The cost of the hand (not including motors) could be as low as $50.

The Humanoid Hub

23,065 просмотров • 6 месяцев назад

There are many ways to collect high-quality data. GenRobot seems to be closer to human-like methods. It uses a wearable exoskeleton robotic hand: a person simply wears the Gen DAS Dex and can flexibly complete various tasks, while simultaneously capturing the entire human motion trajectory and converting it into high-quality data for use by the humanoid robot. >23 degrees of freedom omnidirectional hand capture with millimeter-level precision >Tactile and visual fusion >Sub-millisecond head-hand synchronization

There are many ways to collect high-quality data. GenRobot seems to be closer to human-like methods. It uses a wearable exoskeleton robotic hand: a person simply wears the Gen DAS Dex and can flexibly complete various tasks, while simultaneously capturing the entire human motion trajectory and converting it into high-quality data for use by the humanoid robot. >23 degrees of freedom omnidirectional hand capture with millimeter-level precision >Tactile and visual fusion >Sub-millisecond head-hand synchronization

CyberRobo

18,098 просмотров • 4 месяцев назад