Video wird geladen...

Video konnte nicht geladen werden

Zur Startseite

So, just learning that when standard tracks failed on M113 APCs in Vietnam’s deep mud, crews bolted specialized capstan drum hubs directly onto the front drive sprockets. By wrapping a heavy rope around the spinning hubs and anchoring it to a tree or auger, the crew turned the vehicle’s...

91,291 Aufrufe • vor 11 Tagen •via X (Twitter)

0 Kommentare

Keine Kommentare verfügbar

Kommentare vom Original-Post werden hier angezeigt

Ähnliche Videos

How to Safely Remove a Tree Leaning on a House Roof. Good job done right. When a massive tree falls and wedges itself directly against a roofline, you can't just start hacking away blindly. One wrong cut can send thousands of pounds crashing down, destroying the structure. Here is how to systematically dismantle a high-stress leaners using a secure rigging setup. Step 1: Assess and Rig for Tension Before a chainsaw ever starts up, you must counter the gravity pulling the tree into the house. Identify a sturdy, healthy anchor tree nearby. Run a heavy-duty rigging line and pulley system from the high point of the fallen tree back to your anchor. Tension the lines to absorb the weight so the tree is suspended rather than resting entirely on the shingles. Step 2: Clear the Shingle-Side Limbs With the main weight supported, start by removing the smaller branches directly contacting the roof. Make precise relief cuts on smaller limbs to prevent binding. Work carefully from the roof surface, clearing debris immediately to keep a clear, slip-free footing. Step 3: Section the Upper Trunk Never try to take the whole trunk down at once. It must be chunked down piece by piece. Secure a dynamic rigging strap tightly around the segment you intend to cut. Make a clean top-cut while a ground crew member mans the lowering line. Once severed, let the rigging system catch the weight, suspend it mid-air, and smoothly swing or lower it away from the building. Step 4: Work Your Way Down the Main Stem Repeat the sectioning process, gradually moving down toward the root ball. Keep communication tight with your ground crew to ensure they are clear of the drop zone. Let the tensioned ropes do the heavy lifting, keeping the trunk controlled and preventing it from rolling or twisting onto the house. Step 5: The Final Drop Once the trunk is short enough and no longer poses a threat to the roof structure, release the rigging lines or make a final directional cut to safely drop the remaining base log flat to the ground. ⚠️ Safety Notice: Tree work under structural tension is incredibly unpredictable. Always wear proper PPE, use certified rigging gear, and ensure your ground crew knows how to operate the lines safely!

Chuckling Charlie

37,060 Aufrufe • vor 20 Tagen