Загрузка видео...

Не удалось загрузить видео

Возникла проблема при загрузке этого видео. Это может быть связано с временными проблемами сети или видео может быть недоступно.

На главную

Jet engine Thrust test✅🔥🚀: Finally we have the data we need, at 100% throttle alone, the engine generated thrust of 7.2KG to 7.8KG (76.5 Newtons) At 100% throttle plus Afterburner it soared to 14KG to 16KG, I saw it peak at 18KG, but we'll take the average at 16KG... thrust (157 Newtons) For this scale & build, I am a bit satisfied with the performance, although if I ditch the cooling design on the exhaust the thrust will increase significantly, but the exhaust will glow red hot, so we had to trade some thrust for better cooling for the engine. All the same, I am satisfied with the engine performance at this scale. I look forward to our runway tests⚡️ #Zedora #madeinEbonyi #madeinNigeria 🇳🇬show more

Ziko Abara

21,892 subscribers

32,518 просмотров • 1 год назад •via X (Twitter)

Игры Наука и технологии Образование

Anya Rossi• Live Now

Private livecam show

Комментарии: 10

Фото профиля Project Dreams 💫🙂

Project Dreams 💫🙂1 год назад

This man is doing something mind blowing and people don't really care 🥲, he should have at least 250k followers here......I appreciate your zeal, you have come a long way 🤲🏽🤲🏽 I see heavy potential in what u are doing!!!

Фото профиля Ziko Abara

Ziko Abara1 год назад

Thank you 🙌

Фото профиля Chief Ikukuoma

Chief Ikukuoma1 год назад

Ziko nyebe ọkụ

Фото профиля Space enthusiast.

Space enthusiast.1 год назад

I believe the thrust should be more than that. The chain is an angle therefore you have to add the component of the angle of inclination to your calculation. T+Tcos(angle ). Where T=Thrust

Фото профиля Bamidele

Bamidele1 год назад

The next thing you should be looking at is making automobiles engines. Collaborate with chemical, metallurgical, electrical, electronics, mechanical, mechatronics, computer engineers, upholstery, and technicians to build autos for our country. We need to build self sufficiency.

Фото профиля Director Ohi

Director Ohi1 год назад

This man.. u dey burst my brain 🤯

Фото профиля deyvid

deyvid1 год назад

Well done Zedora

Фото профиля Lawgic 𝕏 

Lawgic 𝕏 1 год назад

While I'm not a rocket engineer or physicist, don't you think attachment of the engine at an angle produces a tangent based fraction of the actual force (forgive my gibberish tech terms) but i think it has to do with vector calculations or something similar

Фото профиля MR.B(미스터 죽복)🇳🇬🇰🇷

MR.B(미스터 죽복)🇳🇬🇰🇷1 год назад

Fire on sir.🔥💯

Фото профиля Kïñg Zïkmãñ™ 👑

Kïñg Zïkmãñ™ 👑1 год назад

Zedora ❤️

Похожие видео

Good news on the jet engine project ✅: I redesigned the exhaust system again to prioritize cooling, thrust & the afterburner sequence all together, it now works better✅, no red hot situation on the exhaust at all✅ The new design also reduces pressure on the turbine on AB mode✅ This test was done with gas for the main engine running at 50% power, then liquid kerosene for the AB🔥. I wish to change the fuel nozzles on the main burner to a more powerful one next week, then we'll do this test again close to 100% power which will be louder & much more violent ⚡️ After that, we'll go straight to a runway & let this beast run🚀 #Zedora #madeinEbonyi 🇳🇬

Good news on the jet engine project ✅: I redesigned the exhaust system again to prioritize cooling, thrust & the afterburner sequence all together, it now works better✅, no red hot situation on the exhaust at all✅ The new design also reduces pressure on the turbine on AB mode✅ This test was done with gas for the main engine running at 50% power, then liquid kerosene for the AB🔥. I wish to change the fuel nozzles on the main burner to a more powerful one next week, then we'll do this test again close to 100% power which will be louder & much more violent ⚡️ After that, we'll go straight to a runway & let this beast run🚀 #Zedora #madeinEbonyi 🇳🇬

Ziko Abara

22,396 просмотров • 1 год назад

I got back from the hospital and asked the boys to get ready to fire up the jet engine🔥 I am super fired up as well, you can see the performance resulting from the last design upgrades, we finally have BLUE Afterburner flames, showing tremendous increase in power and thrust, the grasses along the exhaust path in the uncompleted building turned brown after this test, my welder was so happy he started taking selfies close to the engine. I can't imagine what this beast will do on a runway and for ndi 'aesthetics🤣, I don't believe u expect me to test a freaking jet engine at Transcorp Hilton do u?😂 No worries, Soon we will move to our advanced facility already in the works ✅ We are back 🚀 #Zedora

I got back from the hospital and asked the boys to get ready to fire up the jet engine🔥 I am super fired up as well, you can see the performance resulting from the last design upgrades, we finally have BLUE Afterburner flames, showing tremendous increase in power and thrust, the grasses along the exhaust path in the uncompleted building turned brown after this test, my welder was so happy he started taking selfies close to the engine. I can't imagine what this beast will do on a runway and for ndi 'aesthetics🤣, I don't believe u expect me to test a freaking jet engine at Transcorp Hilton do u?😂 No worries, Soon we will move to our advanced facility already in the works ✅ We are back 🚀 #Zedora

Ziko Abara

77,055 просмотров • 11 месяцев назад

Taxi test on the Jet engine ⚡️: The engine runs so cool❄️ (EGT 680-800*C) except on prolonged afterburner🔥 use which takes EGT to about 1000*C⚠️ We switched to testing Diesel as fuel & honestly I think I prefer Diesel to kerosene 🤔. Maybe I'll test actual Jet-A1 too Afterburner🔥 mode wanted to send the test bed flying, so we had to abort that and run the taxi test on normal mode at 40-50% throttle. Thrust levels are really excellent, I just wonder how fast this will be at full power plus full afterburner 🔥. We literally built an air breathing rocket engine 🤣. Honestly, I am happy again, the breakdown of this project for weeks took my joy away, I was always sad and down, but hell bent on solving the problems. Next is to build the remote control system so we can unleash the full power of the Jet engine in a long runway from a safe distance. #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Taxi test on the Jet engine ⚡️: The engine runs so cool❄️ (EGT 680-800C) except on prolonged afterburner🔥 use which takes EGT to about 1000C⚠️ We switched to testing Diesel as fuel & honestly I think I prefer Diesel to kerosene 🤔. Maybe I'll test actual Jet-A1 too Afterburner🔥 mode wanted to send the test bed flying, so we had to abort that and run the taxi test on normal mode at 40-50% throttle. Thrust levels are really excellent, I just wonder how fast this will be at full power plus full afterburner 🔥. We literally built an air breathing rocket engine 🤣. Honestly, I am happy again, the breakdown of this project for weeks took my joy away, I was always sad and down, but hell bent on solving the problems. Next is to build the remote control system so we can unleash the full power of the Jet engine in a long runway from a safe distance. #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

29,144 просмотров • 1 год назад

Running the engine at 100% power + 100% Afterburner is a bad idea⚠️❌😂: I throttled the main engine to 100% and throttled the Afterburner to 100%🥲, it turned out to be Overkill, it was so powerful & violent, however we recorded the highest temperature ever🔥, almost 1300 degrees Celsius 😂 This caused the engine to overheat and melt the turbine blades completely 😂 Final observations: We can run the main engine at max 100% throttle peacefully, but adding Afterburner at 100% will kill the engine ⚠️ The safest maximum operating principles for this design and build are 1. 100% throttle (No Afterburner)= safe✅ 2. 80% throttle and 40-60% Afterburner = safe✅ 3. 100% throttle and 100% Afterburner = engine failure ❌😭 This is why you must test and test and test to failure, to understand the operational limits of machines, exactly why Elon keeps testing his starship continuously as well... We'll replace the turbine in due time🤞🏻, until next time guys, which should be runway testing finally 🚀 We move✊🏻 #Zedora

Running the engine at 100% power + 100% Afterburner is a bad idea⚠️❌😂: I throttled the main engine to 100% and throttled the Afterburner to 100%🥲, it turned out to be Overkill, it was so powerful & violent, however we recorded the highest temperature ever🔥, almost 1300 degrees Celsius 😂 This caused the engine to overheat and melt the turbine blades completely 😂 Final observations: We can run the main engine at max 100% throttle peacefully, but adding Afterburner at 100% will kill the engine ⚠️ The safest maximum operating principles for this design and build are 1. 100% throttle (No Afterburner)= safe✅ 2. 80% throttle and 40-60% Afterburner = safe✅ 3. 100% throttle and 100% Afterburner = engine failure ❌😭 This is why you must test and test and test to failure, to understand the operational limits of machines, exactly why Elon keeps testing his starship continuously as well... We'll replace the turbine in due time🤞🏻, until next time guys, which should be runway testing finally 🚀 We move✊🏻 #Zedora

Ziko Abara

59,566 просмотров • 1 год назад

Anxiety driven short test😂: Apologies for not wearing any safety gear asides the ear Muffs 🙏🏻 Our Afterburner Problem has been solved✅ I can confidently say we can design a powerful jet engine in Nigeria 🇳🇬✊🏻 Engine is running on Liquid kerosene at 80% power I changed the exhaust design to allow for a region of low pressure in between where AB fuel can be vaporized on contact with the subsonic exhaust flow & ignited, the entire explosion now proceeds to a high pressure region where the entire flow becomes supersonic again✅, leading to a massive increase in thrust 🚀. Seems like the engine roar became more violent too, I could feel the ground shaking a bit. Also notice the insane drop in the RED HOT situation on the exhaust liner. We will do 100% power and Afterburner testing tomorrow. The enormous amount of data, knowledge & experience I've gotten from this project✊🏻 #Zedora

Anxiety driven short test😂: Apologies for not wearing any safety gear asides the ear Muffs 🙏🏻 Our Afterburner Problem has been solved✅ I can confidently say we can design a powerful jet engine in Nigeria 🇳🇬✊🏻 Engine is running on Liquid kerosene at 80% power I changed the exhaust design to allow for a region of low pressure in between where AB fuel can be vaporized on contact with the subsonic exhaust flow & ignited, the entire explosion now proceeds to a high pressure region where the entire flow becomes supersonic again✅, leading to a massive increase in thrust 🚀. Seems like the engine roar became more violent too, I could feel the ground shaking a bit. Also notice the insane drop in the RED HOT situation on the exhaust liner. We will do 100% power and Afterburner testing tomorrow. The enormous amount of data, knowledge & experience I've gotten from this project✊🏻 #Zedora

Ziko Abara

99,902 просмотров • 1 год назад

Here we go guys✅🚀 The jet engine survived the stress test✅ We pushed the engine to full power(100% throttle and 100% Afterburner) for about 12 minutes nonstop. It was critically loud, violent and powerful 🔥 My neighbor's police orderly said whenever they hear a very loud sound they know I'm back in town🤣 After the stress test the jet turbine blades still looked brand new✅, this means the exhaust design is near perfect ✅ The Exhaust Gas Temperature never exceeded 860 degrees Celsius even on afterburner mode✅, although the flame shooting out is over a thousand degrees Celsius ⚠️ For the first time, I saw some blue AB flames which looked cool🥶 On standard operation, the jet engine can now run for hours nonstop as long as there's fuel✅ The Afterburner mode pushes the engine power further, tho we have to limit it's duration due to the nature of the exhaust material currently being used. We are finally ready to take this beast to a runway and let it loose✅🚀 We will start making the arrangements immediately, thank you for your support, stay tuned as we do great things together 🙌 #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

20,861 просмотров • 1 год назад

Our ground speed⚠️ test video on the PROTOTYPE: We ran the Turbojet engine at 60% throttle & No afterburner for this test⚠️. The UAV prototype started accelerating to about 80km/h, as it approached high speed, control became difficult & instability set in, leading to a crash, we will need to redo the wheel placements & weight distribution✅. The UAV weighs about 65kg fully loaded, although our engine was capable of propelling it, we will need to redesign the build to reduce weight by about 40% to make flight possible & stable, we will be exploring a full aluminum or composite material build. After the crash, the wheels jammed up & misaligned, making further runway tests impossible, the power of the engine made the jammed tyres screech on the tarmac. We did not exceed 60% throttle talk more of using Afterburner mode because of control instability. We have more work and improvements to make⚡️ Things to improve : We need to reduce the weight of the build by 40%✅ We need to redesign the wheel placement for better stability on high speed✅ Alot has been learned from this outing, we will redesign the prototype to improve stability & we'll be back again Hopefully, we may be able to attempt flight #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Our ground speed⚠️ test video on the PROTOTYPE: We ran the Turbojet engine at 60% throttle & No afterburner for this test⚠️. The UAV prototype started accelerating to about 80km/h, as it approached high speed, control became difficult & instability set in, leading to a crash, we will need to redo the wheel placements & weight distribution✅. The UAV weighs about 65kg fully loaded, although our engine was capable of propelling it, we will need to redesign the build to reduce weight by about 40% to make flight possible & stable, we will be exploring a full aluminum or composite material build. After the crash, the wheels jammed up & misaligned, making further runway tests impossible, the power of the engine made the jammed tyres screech on the tarmac. We did not exceed 60% throttle talk more of using Afterburner mode because of control instability. We have more work and improvements to make⚡️ Things to improve : We need to reduce the weight of the build by 40%✅ We need to redesign the wheel placement for better stability on high speed✅ Alot has been learned from this outing, we will redesign the prototype to improve stability & we'll be back again Hopefully, we may be able to attempt flight #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

143,422 просмотров • 8 месяцев назад

Impromptu test on the Mark3 turbojet engine😎😂: The Ear Muffs are arriving next week, but again, I couldn't hold back but to run the engine at mild power today😂. I am probably the first person in Nigeria 🇳🇬 & probably all of Africa to build a self sustaining turbojet engine 🔥🤔, please correct me if I am wrong tho🙏🏻, but I doubt. Incase u don't know what a turbojet engine is, it is the engine that powers most fighter jets🚀. The engine is self sustaining because once it gets to idle speed, it runs at about 35,000 RPM on its own without the starter motor & batteries, and can only be shut down if the fuel supply is shut off, as demonstrated by my assistant in the clips. We will do a full power test with the afterburner next week when the ear Muffs arrive😎, so we don't go deaf🤣😂. We built this beast in Ebonyi State, Nigeria 🛠️⚡️ #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Impromptu test on the Mark3 turbojet engine😎😂: The Ear Muffs are arriving next week, but again, I couldn't hold back but to run the engine at mild power today😂. I am probably the first person in Nigeria 🇳🇬 & probably all of Africa to build a self sustaining turbojet engine 🔥🤔, please correct me if I am wrong tho🙏🏻, but I doubt. Incase u don't know what a turbojet engine is, it is the engine that powers most fighter jets🚀. The engine is self sustaining because once it gets to idle speed, it runs at about 35,000 RPM on its own without the starter motor & batteries, and can only be shut down if the fuel supply is shut off, as demonstrated by my assistant in the clips. We will do a full power test with the afterburner next week when the ear Muffs arrive😎, so we don't go deaf🤣😂. We built this beast in Ebonyi State, Nigeria 🛠️⚡️ #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

626,494 просмотров • 1 год назад

Our little taxi test on the new build✅ I must admit I am very happy today, the acceleration was indeed a sight to behold, now imagine the top speed on the runway. we took data from the last runway tests & implemented many changes, the entire frame now weighs about 50kg It can be lighter, but I'm working with the resources & materials available to me The tyres are more balanced, aligned & stable The engine ran at 94,000 rpm at full throttle and still has extra 16,000rpm to deliver if I want, meaning more power, although it's danger limit is going above that. The wings currently have relatively flat aerofoil due to complexities in aluminum metal fabrication and weight management. I am still having issues with the Afterburner system, it's difficult to start and often gets blown off when the engine nears full throttle, I will review the sequence design again and make sure we harness the full power of the Afterburner. As u see, I'm also using the manual controls, the remote control unit is also undergoing upgrades Thanks for all the support and encouragement, may God bless us all #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Our little taxi test on the new build✅ I must admit I am very happy today, the acceleration was indeed a sight to behold, now imagine the top speed on the runway. we took data from the last runway tests & implemented many changes, the entire frame now weighs about 50kg It can be lighter, but I'm working with the resources & materials available to me The tyres are more balanced, aligned & stable The engine ran at 94,000 rpm at full throttle and still has extra 16,000rpm to deliver if I want, meaning more power, although it's danger limit is going above that. The wings currently have relatively flat aerofoil due to complexities in aluminum metal fabrication and weight management. I am still having issues with the Afterburner system, it's difficult to start and often gets blown off when the engine nears full throttle, I will review the sequence design again and make sure we harness the full power of the Afterburner. As u see, I'm also using the manual controls, the remote control unit is also undergoing upgrades Thanks for all the support and encouragement, may God bless us all #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

139,715 просмотров • 7 месяцев назад

A controlled taxi test on the jet engine test bed prototype. Giving u a glimpse of what the runway test may look like. Never forget, that Whatever the white man can do, we can do same, or even better, all we need, is willpower, and a war chest of resources ⚡️ The black man is NOT inferior to the white man ⚠️, we are capable of building great things too. This test was done at mild engine power, apologies for the lack of PPE, I didn't just have the strength to go upstairs and get em🤦🏻‍♂️, I'm still in recovery, not working at full capacity, plus it was impromptu, borne out of me missing the jet engine for so long #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

A controlled taxi test on the jet engine test bed prototype. Giving u a glimpse of what the runway test may look like. Never forget, that Whatever the white man can do, we can do same, or even better, all we need, is willpower, and a war chest of resources ⚡️ The black man is NOT inferior to the white man ⚠️, we are capable of building great things too. This test was done at mild engine power, apologies for the lack of PPE, I didn't just have the strength to go upstairs and get em🤦🏻‍♂️, I'm still in recovery, not working at full capacity, plus it was impromptu, borne out of me missing the jet engine for so long #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

33,878 просмотров • 11 месяцев назад

Reaching the KILO-N! We’ve successfully test-run our 100kg (1 kN) engine using the same engine controller. This big boy makes same thrust at idle as 40kg at full throttle. My hands still shaking with the adrenaline. Just needs a bit of startup tuning and a BIGGER fuel pump to hit perfection. Wishing you and your loved ones a Happy (almost) New Year! PS- 40 kg engine to scale

Reaching the KILO-N! We’ve successfully test-run our 100kg (1 kN) engine using the same engine controller. This big boy makes same thrust at idle as 40kg at full throttle. My hands still shaking with the adrenaline. Just needs a bit of startup tuning and a BIGGER fuel pump to hit perfection. Wishing you and your loved ones a Happy (almost) New Year! PS- 40 kg engine to scale

Prateek Dhawan

87,032 просмотров • 1 год назад

I have done it ✅😎😂 The Engine has been fixed and it now runs on afterburner mode🔥, exactly like a fighter jet engine🚀. I repeat, in all humility, I am the first person in Nigeria 🇳🇬 & probably Africa to build a functional self sustaining & afterburning turbojet engine 🙌🏻, if u have data to prove I am not the first, pls show us, if not, then acknowledge me & put some 'respek' on my name😂. Instead of a driving motor, I now use high pressure air from an air blower to start the engine until it self sustains, I also made some design modifications, so technically this is now Mark3-B. I still haven't pushed it to full power😂🥲, it's terrifying & exciting at the same time. Special thanks to everyone who has supported this program from day1, special thanks also to the haters & naysayers, y'all pushed me to anger to make sure I forge on🛠️😤⚡️ If there's anything at all u will learn from me, please learn to NEVER GIVE UP🙌🏻. We did this in Abakaliki, Ebonyi state, Nigeria 🇳🇬. #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

I have done it ✅😎😂 The Engine has been fixed and it now runs on afterburner mode🔥, exactly like a fighter jet engine🚀. I repeat, in all humility, I am the first person in Nigeria 🇳🇬 & probably Africa to build a functional self sustaining & afterburning turbojet engine 🙌🏻, if u have data to prove I am not the first, pls show us, if not, then acknowledge me & put some 'respek' on my name😂. Instead of a driving motor, I now use high pressure air from an air blower to start the engine until it self sustains, I also made some design modifications, so technically this is now Mark3-B. I still haven't pushed it to full power😂🥲, it's terrifying & exciting at the same time. Special thanks to everyone who has supported this program from day1, special thanks also to the haters & naysayers, y'all pushed me to anger to make sure I forge on🛠️😤⚡️ If there's anything at all u will learn from me, please learn to NEVER GIVE UP🙌🏻. We did this in Abakaliki, Ebonyi state, Nigeria 🇳🇬. #Zedora #madeinEbonyi #madeinNigeria 🇳🇬

Ziko Abara

2,182,832 просмотров • 1 год назад

Basic Engine Test with No Afterburner 🔥❌: I revved the engine up to 80% power👀, and I stood partially in the path of the hot exhaust gases, u can see how far the exhaust pressure goes, 100% power was too scary to even think of, imagine I now activate the afterburner 👀🔥, it may blow me to the wall😭😂. This engine is tremendously loud in reality ⚡️ U can also see that the engine is running purely on Liquid kerosene, so no need to carry the big gas cylinder around, how would I even mount it on the test bed😂, and liquid fuels yield more power. We may be doing an powerful afterburner 🔥👀 test this evening or tomorrow morning, I pity my neighbors tho🥲, but they will be fine🙏🏻 #Zedora

Basic Engine Test with No Afterburner 🔥❌: I revved the engine up to 80% power👀, and I stood partially in the path of the hot exhaust gases, u can see how far the exhaust pressure goes, 100% power was too scary to even think of, imagine I now activate the afterburner 👀🔥, it may blow me to the wall😭😂. This engine is tremendously loud in reality ⚡️ U can also see that the engine is running purely on Liquid kerosene, so no need to carry the big gas cylinder around, how would I even mount it on the test bed😂, and liquid fuels yield more power. We may be doing an powerful afterburner 🔥👀 test this evening or tomorrow morning, I pity my neighbors tho🥲, but they will be fine🙏🏻 #Zedora

Ziko Abara

42,013 просмотров • 1 год назад

#WATCH | Delhi: On Kaveri engine development, DRDO Chairman Samir V Kamat says, "Kaveri engine, in its original form, has not delivered the thrust that is required for the LCA. The engine is working very well, it has given us a thrust of 72 kilonewton. But the LCA needs a thrust of 83-85 kilonewton. So, it's not going to be used in the LCA but we are using the derivative of the Kaveri engine for our unmanned combat aerial vehicle. So, without the after burner, the Kaveri engine will be used in our unmanned combat aircraft..."

#WATCH | Delhi: On Kaveri engine development, DRDO Chairman Samir V Kamat says, "Kaveri engine, in its original form, has not delivered the thrust that is required for the LCA. The engine is working very well, it has given us a thrust of 72 kilonewton. But the LCA needs a thrust of 83-85 kilonewton. So, it's not going to be used in the LCA but we are using the derivative of the Kaveri engine for our unmanned combat aerial vehicle. So, without the after burner, the Kaveri engine will be used in our unmanned combat aircraft..."

ANI

208,011 просмотров • 4 месяцев назад

From Balloon to Jet Engine: The Evolution of Thrust

From Balloon to Jet Engine: The Evolution of Thrust

S.T.E.M Explorer

33,174 просмотров • 5 месяцев назад

🌕 Tested on Earth. Bound for the Moon. The BE-7 engine for our Blue Moon MK1 lunar lander just completed acceptance testing. Two 290-second tests exposed the engine to its full range of thrust and mixture ratios to verify engine performance. The engine is now off to Florida for integration with MK1.

🌕 Tested on Earth. Bound for the Moon. The BE-7 engine for our Blue Moon MK1 lunar lander just completed acceptance testing. Two 290-second tests exposed the engine to its full range of thrust and mixture ratios to verify engine performance. The engine is now off to Florida for integration with MK1.

Blue Origin

179,088 просмотров • 6 месяцев назад